sock_map_link() is called to update a sockmap entry with a sk. But, if the
sock_map_init_proto() call fails then we return an error to the map_update
op against the sockmap. In the error path though we need to cleanup psock
and dec the refcnt on any programs associated with the map, because we
refcnt them early in the update process to ensure they are pinned for the
psock. (This avoids a race where user deletes programs while also updating
the map with new socks.)

In current code we do the prog refcnt dec explicitely by calling
bpf_prog_put() when the program was found in the map. But, after commit
'38207a5e' in this error path we've already done the prog to psock
assignment so the programs have a reference from the psock as well. This
then causes the psock tear down logic, invoked by sk_psock_put() in the
error path, to similarly call bpf_prog_put on the programs there.

To be explicit this logic does the prog->psock assignment:

  if (msg_*)
    psock_set_prog(...)

Then the error path under the out_progs label does a similar check and
dec with:

  if (msg_*)
     bpf_prog_put(...)

And the teardown logic sk_psock_put() does ...

  psock_set_prog(msg_*, NULL)

... triggering another bpf_prog_put(...). Then KASAN gives us this splat,
found by syzbot because we've created an inbalance between bpf_prog_inc and
bpf_prog_put calling put twice on the program.

  BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline]
  BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_put kernel/bpf/syscall.c:1812 [inline] kernel/bpf/syscall.c:1829
  BUG: KASAN: vmalloc-out-of-bounds in bpf_prog_put+0x8c/0x4f0 kernel/bpf/syscall.c:1829 kernel/bpf/syscall.c:1829
  Read of size 8 at addr ffffc90000e76038 by task syz-executor020/3641

To fix clean up error path so it doesn't try to do the bpf_prog_put in the
error path once progs are assigned then it relies on the normal psock
tear down logic to do complete cleanup.

For completness we also cover the case whereh sk_psock_init_strp() fails,
but this is not expected because it indicates an incorrect socket type
and should be caught earlier.

Fixes: 38207a5e ("bpf, sockmap: Attach map progs to psock early for feature probes")
Reported-by: syzbot+bb73e71cf4b8fd376a4f@syzkaller.appspotmail.com
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220104214645.290900-1-john.fastabend@gmail.com

Applications can be confused slightly because we do not always return the
same error code as expected, e.g. what the TCP stack normally returns. For
example on a sock err sk->sk_err instead of returning the sock_error we
return EAGAIN. This usually means the application will 'try again'
instead of aborting immediately. Another example, when a shutdown event
is received we should immediately abort instead of waiting for data when
the user provides a timeout.

These tend to not be fatal, applications usually recover, but introduces
bogus errors to the user or introduces unexpected latency. Before
'c5d2177a' we fell back to the TCP stack when no data was available
so we managed to catch many of the cases here, although with the extra
latency cost of calling tcp_msg_wait_data() first.

To fix lets duplicate the error handling in TCP stack into tcp_bpf so
that we get the same error codes.

These were found in our CI tests that run applications against sockmap
and do longer lived testing, at least compared to test_sockmap that
does short-lived ping/pong tests, and in some of our test clusters
we deploy.

Its non-trivial to do these in a shorter form CI tests that would be
appropriate for BPF selftests, but we are looking into it so we can
ensure this keeps working going forward. As a preview one idea is to
pull in the packetdrill testing which catches some of this.

Fixes: c5d2177a ("bpf, sockmap: Fix race in ingress receive verdict with redirect to self")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220104205918.286416-1-john.fastabend@gmail.com

The following error is reported when running "./test_progs -t for_each"
under arm64:

  bpf_jit: multi-func JIT bug 58 != 56
  [...]
  JIT doesn't support bpf-to-bpf calls

The root cause is the size of BPF_PSEUDO_FUNC instruction increases
from 2 to 3 after the address of called bpf-function is settled and
there are two bpf-to-bpf calls in test_pkt_access. The generated
instructions are shown below:

  0x48:  21 00 C0 D2    movz x1, #0x1, lsl #32
  0x4c:  21 00 80 F2    movk x1, #0x1

  0x48:  E1 3F C0 92    movn x1, #0x1ff, lsl #32
  0x4c:  41 FE A2 F2    movk x1, #0x17f2, lsl #16
  0x50:  81 70 9F F2    movk x1, #0xfb84

Fixing it by using emit_addr_mov_i64() for BPF_PSEUDO_FUNC, so
the size of jited image will not change.

Fixes: 69c087ba ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211231151018.3781550-1-houtao1@huawei.com

The tc_redirect umounts /sys in the new namespace, which can be
mounted as shared and cause global umount. The lazy umount also
takes down mounted trees under /sys like debugfs, which won't be
available after sysfs mounts again and could cause fails in other
tests.

  # cat /proc/self/mountinfo | grep debugfs
  34 23 0:7 / /sys/kernel/debug rw,nosuid,nodev,noexec,relatime shared:14 - debugfs debugfs rw
  # cat /proc/self/mountinfo | grep sysfs
  23 86 0:22 / /sys rw,nosuid,nodev,noexec,relatime shared:2 - sysfs sysfs rw
  # mount | grep debugfs
  debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)

  # ./test_progs -t tc_redirect
  #164 tc_redirect:OK
  Summary: 1/4 PASSED, 0 SKIPPED, 0 FAILED

  # mount | grep debugfs
  # cat /proc/self/mountinfo | grep debugfs
  # cat /proc/self/mountinfo | grep sysfs
  25 86 0:22 / /sys rw,relatime shared:2 - sysfs sysfs rw

Making the sysfs private under the new namespace so the umount won't
trigger the global sysfs umount.
Reported-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jussi Maki <joamaki@gmail.com>
Link: https://lore.kernel.org/bpf/20220104121030.138216-1-jolsa@kernel.org

This patch introduces new probes to check whether the kernel supports
instruction set extensions v2 and v3. The first introduced eBPF
instructions BPF_J{LT,LE,SLT,SLE} in commit 92b31a9a ("bpf: add
BPF_J{LT,LE,SLT,SLE} instructions"). The second introduces 32-bit
variants of all jump instructions in commit 092ed096 ("bpf:
verifier support JMP32").

These probes are useful for userspace BPF projects that want to use newer
instruction set extensions on newer kernels, to reduce the programs'
sizes or their complexity. LLVM already provides an mcpu=probe option to
automatically probe the kernel and select the newest-supported
instruction set extension. That is however not flexible enough for all
use cases. For example, in Cilium, we only want to use the v3
instruction set extension on v5.10+, even though it is supported on all
kernels v5.1+.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/3bfedcd9898c1f41ac67ca61f144fec84c6c3a92.1641314075.git.paul@isovalent.com

This patch introduces a new probe to check whether the verifier supports
bounded loops as introduced in commit 2589726d ("bpf: introduce
bounded loops"). This patch will allow BPF users such as Cilium to probe
for loop support on startup and only unconditionally unroll loops on
older kernels.

The results are displayed as part of the miscellaneous section, as shown
below.

  $ bpftool feature probe | grep loops
  Bounded loop support is available
  $ bpftool feature probe macro | grep LOOPS
  #define HAVE_BOUNDED_LOOPS
  $ bpftool feature probe -j | jq .misc
  {
    "have_large_insn_limit": true,
    "have_bounded_loops": true
  }
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/f7807c0b27d79f48e71de7b5a99c680ca4bd0151.1641314075.git.paul@isovalent.com

There is currently a single miscellaneous feature probe,
HAVE_LARGE_INSN_LIMIT, to check for the 1M instructions limit in the
verifier. Subsequent patches will add additional miscellaneous probes,
which follow the same pattern at the existing probe. This patch
therefore refactors the probe to avoid code duplication in subsequent
patches.

The BPF program type and the checked error numbers in the
HAVE_LARGE_INSN_LIMIT probe are changed to better generalize to other
probes. The feature probe retains its current behavior despite those
changes.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/956c9329a932c75941194f91790d01f31dfbe01b.1641314075.git.paul@isovalent.com

Horatiu Vultur says:

====================
net: lan966x: Extend switchdev with mdb support

This patch series extends lan966x with mdb support by implementing
the switchdev callbacks: SWITCHDEV_OBJ_ID_PORT_MDB and
SWITCHDEV_OBJ_ID_HOST_MDB.
It adds support for both ipv4/ipv6 entries and l2 entries.

v2->v3:
- rename PGID_FIRST and PGID_LAST to PGID_GP_START and PGID_GP_END
- don't forget and relearn an entry for the CPU if there are more
  references to the cpu.

v1->v2:
- rename lan966x_mac_learn_impl to __lan966x_mac_learn
- rename lan966x_mac_cpu_copy to lan966x_mac_ip_learn
- fix grammar and typos in comments and commit messages
- add reference counter for entries that copy frames to CPU
====================
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend lan966x driver with mdb support by implementing the switchdev
calls: SWITCHDEV_OBJ_ID_PORT_MDB and SWITCHDEV_OBJ_ID_HOST_MDB.
It is allowed to add both ipv4/ipv6 entries and l2 entries. To add
ipv4/ipv6 entries is not required to use the PGID table while for l2
entries it is required. The PGID table is much smaller than MAC table
so only fewer l2 entries can be added.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The first entries in the PGID table are used by the front ports while
the last entries are used for different purposes like flooding mask,
copy to CPU, etc. So add these macros to define which entries can be
used for general purpose.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend mac functionality with the function lan966x_mac_ip_learn. This
function adds an entry in the MAC table for IP multicast addresses.
These entries can copy a frame to the CPU but also can forward on the
front ports.
This functionality is needed for mdb support. In case the CPU and some
of the front ports subscribe to an IP multicast address.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Golle says:

====================
net: ethernet: mtk_eth_soc: refactoring and Clause 45

Rework value and type of mdio read and write functions in mtk_eth_soc
and generally clean up and unify both functions.
Then add support to access Clause 45 phy registers, using newly
introduced helper inline functions added by a patch Russell King has
suggested in a reply to an earlier version of this series [1].

All three commits are tested on the Bananapi BPi-R64 board having
MediaTek MT7531BE DSA gigE switch using clause 22 MDIO and
Ubiquiti UniFi 6 LR access point having Aquantia AQR112C PHY using
clause 45 MDIO.

[1]: https://lore.kernel.org/netdev/Ycr5Cna76eg2B0An@shell.armlinux.org.uk/

v11: also address return value of mtk_mdio_busy_wait
v10: correct order of SoB lines in 2/3, change patch order in series
v9: improved formatting and Cc missing maintainer
v8: add patch from Russel King, switch to bitfield helper macros
v7: remove unneeded variables and order OR-ed call parameters
v6: further clean up functions and more cleanly separate patches
v5: fix wrong variable name in first patch covered by follow-up patch
v4: clean-up return values and types, split into two commits
v3: return -1 instead of 0xffff on error in _mtk_mdio_write
v2: use MII_DEVADDR_C45_SHIFT and MII_REGADDR_C45_MASK to extract
    device id and register address. Unify read and write functions to
    have identical types and parameter names where possible as we are
    anyway already replacing both function bodies.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement read and write access to IEEE 802.3 Clause 45 Ethernet
phy registers while making use of new mdiobus_c45_regad and
mdiobus_c45_devad helpers.

Tested on the Ubiquiti UniFi 6 LR access point featuring
MediaTek MT7622BV WiSoC with Aquantia AQR112C.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a couple of helpers and definitions to extract the clause 45 regad
and devad fields from the regnum passed into MDIO drivers.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of returning -1 (-EPERM) when MDIO bus is stuck busy
while writing or 0xffff if it happens while reading, return the
appropriate -ETIMEDOUT. Also fix return type to int instead of u32.
Refactor functions to use bitfield helpers instead of having various
masking and shifting constants in the code, which also results in the
register definitions in the header file being more obviously related
to what is stated in the MediaTek's Reference Manual.

Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Depending on BIOS configuration IOSM driver exchanges
protocol required for putting device into D3L2 or D3L1.2.

ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2.

This patch forces PCI core know this device should stay at D0.
- pci_save_state()is expensive since it does a lot of slow PCI
config reads.

The reported issue is not observed on x86 platform. The supurios
wake on AMD platform needs to be futher debugged with orignal patch
submitter [1]. Also the impact of adding pci_save_state() needs to be
assessed by testing it on other platforms.

This reverts commit f4dd5174("net: wwan: iosm: Keep device
at D0 for s2idle case").

[1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-next-for-net-next-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Just a few more changes:
 - mac80211: allow non-standard VHT MCSes 10/11
 - mac80211: add sleepable station iterator for drivers
 - nl80211: clarify a comment
 - mac80211: small cleanup to use typed element helpers

* tag 'mac80211-next-for-net-next-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
  mac80211: use ieee80211_bss_get_elem()
  nl80211: clarify comment for mesh PLINK_BLOCKED state
  mac80211: Add stations iterator where the iterator function may sleep
  mac80211: allow non-standard VHT MCS-10/11
====================

Link: https://lore.kernel.org/r/20220104153403.69749-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instead of ieee80211_bss_get_ie(), use the more typed
ieee80211_bss_get_elem().

Link: https://lore.kernel.org/r/20211220113609.56f8e2a70152.Id5a56afb8a4f9b38d10445e5a1874e93e84b5251@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>

When a mesh link is in blocked state, it is very useful to still allow
auth requests from the peer to re-establish it.
When a remote node is power cycled, the peer state can easily end up
in blocked state if multiple auth attempts are performed. Since this
can lead to several minutes of downtime, we should accept auth attempts
of the peer after it has come back.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211220105147.88625-1-nbd@nbd.nameSigned-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211_iterate_active_interfaces() and
ieee80211_iterate_active_interfaces_atomic() already exist, where the
former allows the iterator function to sleep. Add
ieee80211_iterate_stations() which is similar to
ieee80211_iterate_stations_atomic() but allows the iterator to sleep.
This is needed for adding SDIO support to the rtw88 driver. Some
interators there are reading or writing registers. With the SDIO ops
(sdio_readb, sdio_writeb and friends) this means that the iterator
function may sleep.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211228211501.468981-2-martin.blumenstingl@googlemail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Some AP can possibly try non-standard VHT rate and mac80211 warns and drops
packets, and leads low TCP throughput.

    Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2
    WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021

Since commit c27aa56a ("cfg80211: add VHT rate entries for MCS-10 and MCS-11")
has added, mac80211 adds this support as well.

After this patch, throughput is good and iw can get the bitrate:
    rx bitrate:	975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2
or
    rx bitrate:	1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2

Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

Return value from efx_mcdi_rpc() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xu xin says:

====================
ipv4: Namespaceify two sysctls related with mtu

The following patch series enables the min_pmtu and mtu_expires to
be visible and configurable per net namespace. Different namespace
application might have different requirements on the setting of
min_pmtu and mtu_expires.

If these two patches are applied, inside a net namespace we create,
we can see two more sysctls under /proc/sys/net/ipv4/route:
1. min_pmtu
2. mtu_expires

where min_pmtu and mtu_expires are configurable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the sysctl mtu_expires to be configured per net
namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables the sysctl min_pmtu to be configured per net
namespace.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent bpf-next merge brought in header changes which uncovered
includes missing in net-next which were not present in bpf-next.
Build problems happen only on less-popular arches like hppa,
sparc, alpha etc.

I could repro the build problem with ice but not the mlx5 problem
Abdul was reporting. mlx5 does look like it should include filter.h,
anyway.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: e63a0234 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Link: https://lore.kernel.org/all/7c03768d-d948-c935-a7ab-b1f963ac7eed@linux.vnet.ibm.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for scatter gather DMA. DMA in PMAC splits
the packet into several buffers when the MTU on the CPU port is
less than the MTU of the switch. The first buffer starts at an
offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the
offset. Thanks to this patch, the user can still connect to the
device in such a situation. For normal configurations, the patch
has no effect on performance.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for external timestamp and periodic signal output.
TJA1103 have one periodic signal and one external time stamp signal that
can be multiplexed on all 11 gpio pins.

The periodic signal can be only enabled or disabled. Have no start time
and if is enabled will be generated with a period of one second in sync
with the LTC seconds counter. The phase change is possible only with a
half of a second.

The external timestamp signal has no interrupt and no valid bit and
that's why the timestamps are handled by polling in .do_aux_work.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paul Blakey says:

====================
net/sched: Pass originating device to drivers offloading ct connection

Currently, drivers register to a ct zone that can be shared by multiple
devices. This can be inefficient for the driver to offload, as it
needs to handle all the cases where the tuple can come from,
instead of where it's most likely will arive from.

For example, consider the following tc rules:
tc filter add dev dev1 ... flower action ct commit zone 5 \
   action mirred egress redirect dev dev2

tc filter add dev dev2 ... flower action ct zone 5 \
   action goto chain chain 2
tc filter add dev dev2 ... flower ct_state +trk+est ... \
   action mirred egress redirect dev dev1

Both dev2 and dev1 register to the zone 5 flow table (created
by act_ct). A tuple originating on dev1, going to dev2, will
be offloaded to both devices, and both will need to offload
both directions, resulting in 4 total rules. The traffic
will only hit originiating tuple on dev1, and reply tuple
on dev2.

By passing the originating device that created the connection
with the tuple, dev1 can choose to offload only the originating
tuple, and dev2 only the reply tuple. Resulting in a more
efficient offload.

The first patch adds an act_ct nf conntrack extension, to
temporarily store the originiating device from the skb before
offloading the connection once the connection is established.
Once sent to offload, it fills the tuple originating device.

The second patch get this information from tuples
which pass in openvswitch.

The third patch is Mellanox driver ct offload implementation using
this information to provide a hint to firmware of where this
offloaded tuple packets will arrive from (LOCAL or UPLINK port),
and thus increase insertion rate.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Get originating device from tuple offload metadata match ingress_ifindex,
and set flow_source hint to either LOCAL for vf/sf reps, UPLINK for
uplink/wire/tunnel devices/bond, or ANY (as before this patch)
for all others.

This allows lower layer (software steering or firmware) to insert the tuple
rule only in one table (either rx or tx) instead of two (rx and tx).
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To give drivers the originating device information for optimized
connection tracking offload, fill in act ct extension with
ifindex from skb.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver offloading ct tuples can use the information of which devices
received the packets that created the offloaded connections, to
more efficiently offload them only to the relevant device.

Add new act_ct nf conntrack extension, which is used to store the skb
devices before offloading the connection, and then fill in the tuple
iifindex so drivers can get the device via metadata dissector match.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich
 - allow netlink usage in unprivileged containers, by Linus Lüssing
 - remove unneeded variable, by Minghao Chi

* tag 'batadv-next-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
  batman-adv: remove unneeded variable in batadv_nc_init
  batman-adv: allow netlink usage in unprivileged containers
  batman-adv: Start new development cycle
====================

Link: https://lore.kernel.org/r/20220103171722.1126109-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'high_dma' can only be 1 after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly, including a now
useless parameter to vxge_device_register().

[1]: https://lkml.org/lkml/2021/6/7/398Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'dma_flag' can only be 'true' after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly, including the now
useless 'high_dma_flag' field in 'struct s2io_nic'.

[1]: https://lkml.org/lkml/2021/6/7/398Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sorry for being rude but new vendors/drivers are supposed to be disabled
by default, otherwise we will have to manually keep track of all vendors
we are not interested in building.

Fixes: 2f207cbf ("net: vertexcom: Add MSE102x SPI support")
CC: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Colin Foster says:

====================
lynx pcs interface cleanup

The current Felix driver (and Seville) rely directly on the lynx_pcs
device. There are other possible PCS interfaces that can be used with
this hardware, so this should be abstracted from felix. The generic
phylink_pcs is used instead.

While going through the code, there were some opportunities to change
some misleading variable names. Those are included in this patch set.

v1->v2
    * compile-time fixes for freescale parts
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

pcs-lynx.c used lynx_pcs and lynx as a variable name within the same file.
This standardizes all internal variables to just "lynx"
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>