Pull module updates from Jessica Yu:

 - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
   export types were introduced between 2006 - 2008. All the of the
   unused symbols have been long removed and gpl future symbols were
   converted to gpl quite a long time ago, and I don't believe these
   export types have been used ever since. So, I think it should be safe
   to retire those export types now (Christoph Hellwig)

 - Refactor and clean up some aged code cruft in the module loader
   (Christoph Hellwig)

 - Build {,module_}kallsyms_on_each_symbol only when livepatching is
   enabled, as it is the only caller (Christoph Hellwig)

 - Unexport find_module() and module_mutex and fix the last module
   callers to not rely on these anymore. Make module_mutex internal to
   the module loader (Christoph Hellwig)

 - Harden ELF checks on module load and validate ELF structures before
   checking the module signature (Frank van der Linden)

 - Fix undefined symbol warning for clang (Fangrui Song)

 - Fix smatch warning (Dan Carpenter)

* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: potential uninitialized return in module_kallsyms_on_each_symbol()
  module: remove EXPORT_UNUSED_SYMBOL*
  module: remove EXPORT_SYMBOL_GPL_FUTURE
  module: move struct symsearch to module.c
  module: pass struct find_symbol_args to find_symbol
  module: merge each_symbol_section into find_symbol
  module: remove each_symbol_in_section
  module: mark module_mutex static
  kallsyms: only build {,module_}kallsyms_on_each_symbol when required
  kallsyms: refactor {,module_}kallsyms_on_each_symbol
  module: use RCU to synchronize find_module
  module: unexport find_module and module_mutex
  drm: remove drm_fb_helper_modinit
  powerpc/powernv: remove get_cxl_module
  module: harden ELF info handling
  module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols

Pull microblaze updates from Michal Simek:

 - Fix DTB alignment

 - Remove code for very old GCC versions

 - Remove TRACING_SUPPORT selection

* tag 'microblaze-v5.12' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix built-in DTB alignment to be 8-byte aligned
  microblaze: Remove support for gcc < 4
  microblaze: do not select TRACING_SUPPORT directly

Pull objtool updates from Thomas Gleixner:

 - Make objtool work for big-endian cross compiles

 - Make stack tracking via stack pointer memory operations match
   push/pop semantics to prepare for architectures w/o PUSH/POP
   instructions.

 - Add support for analyzing alternatives

 - Improve retpoline detection and handling

 - Improve assembly code coverage on x86

 - Provide support for inlined stack switching

* tag 'objtool-core-2021-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  objtool: Support stack-swizzle
  objtool,x86: Additionally decode: mov %rsp, (%reg)
  x86/unwind/orc: Change REG_SP_INDIRECT
  x86/power: Support objtool validation in hibernate_asm_64.S
  x86/power: Move restore_registers() to top of the file
  x86/power: Annotate indirect branches as safe
  x86/acpi: Support objtool validation in wakeup_64.S
  x86/acpi: Annotate indirect branch as safe
  x86/ftrace: Support objtool vmlinux.o validation in ftrace_64.S
  x86/xen/pvh: Annotate indirect branch as safe
  x86/xen: Support objtool vmlinux.o validation in xen-head.S
  x86/xen: Support objtool validation in xen-asm.S
  objtool: Add xen_start_kernel() to noreturn list
  objtool: Combine UNWIND_HINT_RET_OFFSET and UNWIND_HINT_FUNC
  objtool: Add asm version of STACK_FRAME_NON_STANDARD
  objtool: Assume only ELF functions do sibling calls
  x86/ftrace: Add UNWIND_HINT_FUNC annotation for ftrace_stub
  objtool: Support retpoline jump detection for vmlinux.o
  objtool: Fix ".cold" section suffix check for newer versions of GCC
  objtool: Fix retpoline detection in asm code
  ...

Pull clang LTO updates from Kees Cook:
 "Clang Link Time Optimization.

  This is built on the work done preparing for LTO by arm64 folks,
  tracing folks, etc. This includes the core changes as well as the
  remaining pieces for arm64 (LTO has been the default build method on
  Android for about 3 years now, as it is the prerequisite for the
  Control Flow Integrity protections).

  While x86 LTO enablement is done, it depends on some pending objtool
  clean-ups. It's possible that I'll send a "part 2" pull request for
  LTO that includes x86 support.

  For merge log posterity, and as detailed in commit dc5723b0
  ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
  build:

        make LLVM=1 LLVM_IAS=1 defconfig
        scripts/config -e LTO_CLANG_THIN
        make LLVM=1 LLVM_IAS=1

  (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
  and "ARCH=arm64" to the "make" command lines.)

  Summary:

   - Clang LTO build infrastructure and arm64-specific enablement (Sami
     Tolvanen)

   - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"

* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
  arm64: allow LTO to be selected
  arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
  arm64: vdso: disable LTO
  drivers/misc/lkdtm: disable LTO for rodata.o
  efi/libstub: disable LTO
  scripts/mod: disable LTO for empty.c
  modpost: lto: strip .lto from module names
  PCI: Fix PREL32 relocations for LTO
  init: lto: fix PREL32 relocations
  init: lto: ensure initcall ordering
  kbuild: lto: add a default list of used symbols
  kbuild: lto: merge module sections
  kbuild: lto: limit inlining
  kbuild: lto: fix module versioning
  kbuild: add support for Clang LTO
  tracing: move function tracer options to Kconfig

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.12 kernel.

  This time a calm set with no core changes.

  New drivers/subdrivers:

   - Renesas R8A7790A0 pin controller.

   - Allwinner H616 and H616-R pin controllers.

   - Qualcomm SM8350 and SC8180x pin controllers.

  Improvements:

   - Redo the DT bindings for Ralink RT2880.

   - A common Qualcomm TLMM DT binding in YAML.

   - Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"

* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
  pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
  dt-bindings: pinctrl: Group tuples in pin control properties
  pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
  pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
  pinctrl: at91-pio4: add support for slew-rate
  dt-bindings: pinctrl: at91-pio4: add slew-rate
  pinctrl: actions: Add depends on || COMPILE_TEST
  pinctrl: single: set function name when adding function
  pinctrl: qcom: Add sc8180x TLMM driver
  dt-bindings: pinctrl: qcom: Add sc8180x binding
  dt-bindings: pinctrl: qcom: Define common TLMM binding
  pinctrl: qcom: Add SM8350 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
  pinctrl: samsung: use raw_spinlock for s3c64xx
  dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
  pinctrl: qcom: spmi-mpp: Add PM8019 compatible
  pinctrl: pinmux: add function selector to pinmux-functions
  pinctrl: samsung: use raw_spinlock for locking
  pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
  pinctrl: actions: Add the platform dependency to drivers
  ...

Pull IPMI update from Corey Minyard:
 "Only one change, but it's required for other things, so it needs to go
  in"

* tag 'for-linus-5.12-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: remove open coded version of SMBus block write

Pull follow_pfn() updates from Daniel Vetter:
 "Fixes around VM_FPNMAP and follow_pfn:

   - replace mm/frame_vector.c by get_user_pages in misc/habana and
     drm/exynos drivers, then move that into media as it's sole user

   - close race in generic_access_phys

   - s390 pci ioctl fix of this series landed in 5.11 already

   - properly revoke iomem mappings (/dev/mem, pci files)"

* tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
  PCI: Revoke mappings like devmem
  PCI: Also set up legacy files only after sysfs init
  sysfs: Support zapping of binary attr mmaps
  resource: Move devmem revoke code to resource framework
  /dev/mem: Only set filp->f_mapping
  PCI: Obey iomem restrictions for procfs mmap
  mm: Close race in generic_access_phys
  media: videobuf2: Move frame_vector into media subsystem
  mm/frame-vector: Use FOLL_LONGTERM
  misc/habana: Use FOLL_LONGTERM for userptr
  misc/habana: Stop using frame_vector helpers
  drm/exynos: Use FOLL_LONGTERM for g2d cmdlists
  drm/exynos: Stop using frame_vector helpers

Pull kcmp kconfig update from Daniel Vetter:
 "Make the kcmp syscall available independently of checkpoint/restore.

  drm userspaces uses this, systemd uses this, so makes sense to pull it
  out from the checkpoint-restore bundle.

  Kees reviewed this from security pov and is happy with the final
  version"

Link: https://lwn.net/Articles/845448/

* tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
  kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE

Merge branch 'userns-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull user namespace update from Eric Biederman:
 "There are several pieces of active development, but only a single
  change made it through the gauntlet to be ready for v5.12. That change
  is tightening up the semantics of the v3 capabilities xattr. It is
  just short of being a bug-fix/security issue as no user space is known
  to even generate the problem case"

* 'userns-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  capabilities: Don't allow writing ambiguous v3 file capabilities

Pull qorkqueue updates from Tejun Heo:
 "Tracepoint and comment updates only"

* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Use %s instead of function name
  workqueue: tracing the name of the workqueue instead of it's address
  workqueue: fix annotation for WQ_SYSFS

Pull cgroup updates from Tejun Heo:
 "Nothing interesting. Just two minor patches"

* 'for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix typos in comments
  cgroup: cgroup.{procs,threads} factor out common parts

Pull powerpc updates from Michael Ellerman:

 - A large series adding wrappers for our interrupt handlers, so that
   irq/nmi/user tracking can be isolated in the wrappers rather than
   spread in each handler.

 - Conversion of the 32-bit syscall handling into C.

 - A series from Nick to streamline our TLB flushing when using the
   Radix MMU.

 - Switch to using queued spinlocks by default for 64-bit server CPUs.

 - A rework of our PCI probing so that it happens later in boot, when
   more generic infrastructure is available.

 - Two small fixes to allow 32-bit little-endian processes to run on
   64-bit kernels.

 - Other smaller features, fixes & cleanups.

Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.

* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
  powerpc/perf: Adds support for programming of Thresholding in P10
  powerpc/pci: Remove unimplemented prototypes
  powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
  powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
  powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
  powerpc/64: Fix stack trace not displaying final frame
  powerpc/time: Remove get_tbl()
  powerpc/time: Avoid using get_tbl()
  spi: mpc52xx: Avoid using get_tbl()
  powerpc/syscall: Avoid storing 'current' in another pointer
  powerpc/32: Handle bookE debugging in C in syscall entry/exit
  powerpc/syscall: Do not check unsupported scv vector on PPC32
  powerpc/32: Remove the counter in global_dbcr0
  powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
  powerpc/syscall: implement system call entry/exit logic in C for PPC32
  powerpc/32: Always save non volatile GPRs at syscall entry
  powerpc/syscall: Change condition to check MSR_RI
  powerpc/syscall: Save r3 in regs->orig_r3
  powerpc/syscall: Use is_compat_task()
  powerpc/syscall: Make interrupt.c buildable on PPC32
  ...

Pull ARM updates from Russell King:

 - Generalise byte swapping assembly

 - Update debug addresses for STI

 - Validate start of physical memory with DTB

 - Do not clear SCTLR.nTLSMD in decompressor

 - amba/locomo/sa1111 devices remove method return type is void

 - address markers for KASAN in page table dump

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled
  ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void
  amba: Make use of bus_type functions
  amba: Make the remove callback return void
  vfio: platform: simplify device removal
  amba: reorder functions
  amba: Fix resource leak for drivers without .remove
  ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header
  ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions
  ARM: 9051/1: vdso: remove unneded extra-y addition
  ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible
  ARM: 9049/1: locomo: make locomo bus's remove callback return void
  ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void
  ARM: 9047/1: smp: remove unused variable
  ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores
  ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB
  ARM: 9042/1: debug: no uncompress debugging while semihosting
  ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support
  ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART
  ARM: 9039/1: assembler: generalize byte swapping macro into rev_l

Pull timer fixes from Thomas Gleixner:
 "A small set of clockevent fixes which fell through the cracks before
  the 5.11 release:

   - Ensure a clock is enabled on sh_cmt

   - Trivial compile fail and compile warning fixes"

* tag 'timers-urgent-2021-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/mxs_timer: Add missing semicolon when DEBUG is defined
  clocksource/drivers/sh_cmt: Make sure channel clock supply is enabled
  clocksource/drivers/ixp4xx: Select TIMER_OF when needed

Pull tracing updates from Steven Rostedt:

 - Update to the way irqs and preemption is tracked via the trace event
   PC field

 - Fix handling of unregistering event failing due to allocate memory.
   This is only triggered by failure injection, as it is pretty much
   guaranteed to have less than a page allocation succeed.

 - Do not show the useless "filter" or "enable" files for the "ftrace"
   trace system, as they have no effect on doing anything.

 - Add a warning if kprobes are registered more than once.

 - Synthetic events now have their fields parsed by semicolons. Old
   formats without semicolons will still work, but new features will
   require them.

 - New option to allow trace events to show %p without hashing in trace
   file. The trace file can only be read by root, and reading the raw
   event buffer did not have any pointers hashed, so this does not
   expose anything new.

 - New directory in tools called tools/tracing, where a new tool that
   reads sequential latency reports from the ftrace latency tracers.

 - Other minor fixes and cleanups.

* tag 'trace-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  kprobes: Fix to delay the kprobes jump optimization
  tracing/tools: Add the latency-collector to tools directory
  tracing: Make hash-ptr option default
  tracing: Add ptr-hash option to show the hashed pointer value
  tracing: Update the stage 3 of trace event macro comment
  tracing: Show real address for trace event arguments
  selftests/ftrace: Add '!event' synthetic event syntax check
  selftests/ftrace: Update synthetic event syntax errors
  tracing: Add a backward-compatibility check for synthetic event creation
  tracing: Update synth command errors
  tracing: Rework synthetic event command parsing
  tracing/dynevent: Delegate parsing to create function
  kprobes: Warn if the kprobe is reregistered
  ftrace: Remove unused ftrace_force_update()
  tracepoints: Code clean up
  tracepoints: Do not punish non static call users
  tracepoints: Remove unnecessary "data_args" macro parameter
  tracing: Do not create "enable" or "filter" files for ftrace event subsystem
  kernel: trace: preemptirq_delay_test: add cpu affinity
  tracepoint: Do not fail unregistering a probe due to memory failure
  ...

Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Support instruction latency in 'perf report', with both memory
     latency (weight) and instruction latency information, users can
     locate expensive load instructions and understand time spent in
     different stages.

   - Extend 'perf c2c' to display the number of loads which were blocked
     by data or address conflict.

   - Add 'perf stat' support for L2 topdown events in systems such as
     Intel's Sapphire rapids server.

   - Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
     sort key, for instance:

        perf report --stdio --sort=comm,symbol,code_page_size

   - New 'perf daemon' command to run long running sessions while
     providing a way to control the enablement of events without
     restarting a traditional 'perf record' session.

   - Enable counting events for BPF programs in 'perf stat' just like
     for other targets (tid, cgroup, cpu, etc), e.g.:

        # perf stat -e ref-cycles,cycles -b 254 -I 1000
           1.487903822            115,200      ref-cycles
           1.487903822             86,012      cycles
           2.489147029             80,560      ref-cycles
           2.489147029             73,784      cycles
        ^C

     The example above counts 'cycles' and 'ref-cycles' of BPF program
     of id 254. It is similar to bpftool-prog-profile command, but more
     flexible.

   - Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
     build-id using infrastructure generalised from the eBPF subsystem,
     removing the need for traversing the perf.data file to collect
     build-ids at the end of 'perf record' sessions and helping with
     long running sessions where binaries can get replaced in updates,
     leading to possible mis-resolution of symbols.

   - Support filtering by hex address in 'perf script'.

   - Support DSO filter in 'perf script', like in other perf tools.

   - Add namespaces support to 'perf inject'

   - Add support for SDT (Dtrace Style Markers) events on ARM64.

  perf record:

   - Fix handling of eventfd() when draining a buffer in 'perf record'.

   - Improvements to the generation of metadata events for pre-existing
     threads (mmaps, comm, etc), speeding up the work done at the start
     of system wide or per CPU 'perf record' sessions.

  Hardware tracing:

   - Initial support for tracing KVM with Intel PT.

   - Intel PT fixes for IPC

   - Support Intel PT PSB (synchronization packets) events.

   - Automatically group aux-output events to overcome --filter syntax.

   - Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.

   - Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.

  perf annotate TUI:

   - Fix handling of 'k' ("show line number") hotkey

   - Fix jump parsing for C++ code.

  perf probe:

   - Add protection to avoid endless loop.

  cgroups:

   - Avoid reading cgroup mountpoint multiple times, caching it.

   - Fix handling of cgroup v1/v2 in mixed hierarchy.

  Symbol resolving:

   - Add OCaml symbol demangling.

   - Further fixes for handling PE executables when using perf with Wine
     and .exe/.dll files.

   - Fix 'perf unwind' DSO handling.

   - Resolve symbols against debug file first, to deal with artifacts
     related to LTO.

   - Fix gap between kernel end and module start on powerpc.

  Reporting tools:

   - The DSO filter shouldn't show samples in unresolved maps.

   - Improve debuginfod support in various tools.

  build ids:

   - Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
     entry for that case.

  perf test:

   - Support for PERF_SAMPLE_WEIGHT_STRUCT.

   - Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.

   - Shell based tests for 'perf daemon's commands ('start', 'stop,
     'reconfig', 'list', etc).

   - ARM cs-etm 'perf test' fixes.

   - Add parse-metric memory bandwidth testcase.

  Compiler related:

   - Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
     with -fpatchable-function-entry.

   - Fix ARM64 build with gcc 11's -Wformat-overflow.

   - Fix unaligned access in sample parsing test.

   - Fix printf conversion specifier for IP addresses on arm64, s390 and
     powerpc.

  Arch specific:

   - Support exposing Performance Monitor Counter SPRs as part of
     extended regs on powerpc.

   - Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
     DDR, fix imx8mm ones.

   - Fix common and uarch events for ARM64's A76 and Ampere eMag"

* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
  perf buildid-cache: Don't skip 16-byte build-ids
  perf buildid-cache: Add test for 16-byte build-id
  perf symbol: Remove redundant libbfd checks
  perf test: Output the sub testing result in cs-etm
  perf test: Suppress logs in cs-etm testing
  perf tools: Fix arm64 build error with gcc-11
  perf intel-pt: Add documentation for tracing virtual machines
  perf intel-pt: Split VM-Entry and VM-Exit branches
  perf intel-pt: Adjust sample flags for VM-Exit
  perf intel-pt: Allow for a guest kernel address filter
  perf intel-pt: Support decoding of guest kernel
  perf machine: Factor out machine__idle_thread()
  perf machine: Factor out machines__find_guest()
  perf intel-pt: Amend decoder to track the NR flag
  perf intel-pt: Retain the last PIP packet payload as is
  perf intel_pt: Add vmlaunch and vmresume as branches
  perf script: Add branch types for VM-Entry and VM-Exit
  perf auxtrace: Automatically group aux-output events
  perf test: Fix unaligned access in sample parsing test
  perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
  ...

Pull more nfsd updates from Chuck Lever:
 "Here are a few additional NFSD commits for the merge window:

 Optimization:
   - Cork the socket while there are queued replies

  Fixes:
   - DRC shutdown ordering
   - svc_rdma_accept() lockdep splat"

* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Further clean up svc_tcp_sendmsg()
  SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
  SUNRPC: Use TCP_CORK to optimise send performance on the server
  svcrdma: Hold private mutex while invoking rdma_accept()
  nfsd: register pernet ops last, unregister first

Pull ceph updates from Ilya Dryomov:
 "With netfs helper library and fscache rework delayed, just a few cap
  handling improvements to avoid grabbing mmap_lock in some code paths
  and deal with capsnaps better and a mount option cleanup"

* tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client:
  ceph: defer flushing the capsnap if the Fb is used
  libceph: remove osdtimeout option entirely
  libceph: deprecate [no]cephx_require_signatures options
  ceph: allow queueing cap/snap handling after putting cap references
  ceph: clean up inode work queueing
  ceph: fix flush_snap logic after putting caps

Pull isofs, udf, and quota updates from Jan Kara:
 "Several udf, isofs, and quota fixes"

* tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  parser: Fix kernel-doc markups
  udf: handle large user and group ID
  isofs: handle large user and group ID
  parser: add unsigned int parser
  udf: fix silent AED tagLocation corruption
  isofs: release buffer head before return
  quota: Fix memory leak when handling corrupted quota file

Pull fsnotify update from Jan Kara:
 "Make inotify groups be charged against appropriate memcgs"

* tag 'fsnotify_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  inotify, memcg: account inotify instances to kmemcg

Pull lazytime updates from Jan Kara:
 "Cleanups of the lazytime handling in the writeback code making rules
  for calling ->dirty_inode() filesystem handlers saner"

* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext4: simplify i_state checks in __ext4_update_other_inode_time()
  gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
  fs: improve comments for writeback_single_inode()
  fs: drop redundant check from __writeback_single_inode()
  fs: clean up __mark_inode_dirty() a bit
  fs: pass only I_DIRTY_INODE flags to ->dirty_inode
  fs: don't call ->dirty_inode for lazytime timestamp updates
  fat: only specify I_DIRTY_TIME when needed in fat_update_time()
  fs: only specify I_DIRTY_TIME when needed in generic_update_time()
  fs: correctly document the inode dirty flags

Pull exfat updates from Namjae Jeon:

 - improve file deletion performance with dirsync mount option

 - fix shift-out-of-bounds in exfat_fill_super() reported by syzkaller

* tag 'exfat-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: improve performance of exfat_free_cluster when using dirsync mount option
  exfat: fix shift-out-of-bounds in exfat_fill_super()

Pull zonefs updates from Damien Le Moal:
 "Two changes:

   - A fix that did not make it in time for 5.11, to correct the file
     size initialization of full sequential zone, from Shin'ichiro

   - Add file operation tracepoints to help with debugging, from
     Johannes"

* tag 'zonefs-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix file size of zones in full condition
  zonefs: add tracepoints for file operations

Pull RCU-safe common_lsm_audit() from Al Viro:
 "Make common_lsm_audit() non-blocking and usable from RCU pathwalk
  context.

  We don't really need to grab/drop dentry in there - rcu_read_lock() is
  enough. There's a couple of followups using that to simplify the
  logics in selinux, but those hadn't soaked in -next yet, so they'll
  have to go in next window"

* 'work.audit' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make dump_common_audit_data() safe to be called from RCU pathwalk
  new helper: d_find_alias_rcu()

Pull d_name whack-a-mole from Al Viro:
 "A bunch of places that play with ->d_name in printks instead of using
  proper formats..."

* 'work.d_name' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs_file_mmap(): use %pD
  cifs_debug: use %pd instead of messing with ->d_name
  erofs: use %pd instead of messing with ->d_name
  cramfs: use %pD instead of messing with file_dentry()->d_name

Pull memblock update from Mike Rapoport:
 "Remove return value of memblock_free_all()

  memblock_free_all() returns the total count of freed pages and its
  callers used this value to update totalram_pages. This update is now
  anyway a part of memblock_free_all() and its callers no longer check
  the return value, so make memblock_free_all() void"

* tag 'memblock-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  mm: memblock: remove return value of memblock_free_all()

Pull kgdb updates from Daniel Thompson:
 "Another fairly small set of changes of changes this cycle. The most
  significant functional change is a fix to better manage the flags when
  allocating memory.

  Additionally there is the removal of some unused code (which is
  slightly more dramatic than it sounds given it means there are now no
  tasklets in kgdb) together with a tidy up of the debug prints and some
  spelling corrections for the documentation"

* tag 'kgdb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kgdb: Remove kgdb_schedule_breakpoint()
  kdb: Make memory allocations more robust
  kdb: kdb_support: Fix debugging information problem
  kernel: debug: fix typo issue
  kgdb: rectify kernel-doc for kgdb_unregister_io_module()

Merge tag 'livepatching-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Practical information how to implement reliable stacktraces needed by
   the livepatching consistency model by Mark Rutland and Mark Brown.

 - Automatically generated documentation contents by Mark Brown.

* tag 'livepatching-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  Documentation: livepatch: document reliable stacktrace
  Documentation: livepatch: Convert to automatically generated contents

Pull printk updates from Petr Mladek:

 - New "no_hash_pointers" kernel parameter causes that %p shows raw
   pointer values instead of hashed ones. It is intended only for
   debugging purposes. Misuse is prevented by a fat warning message that
   is inspired by trace_printk().

 - Prevent a possible deadlock when flushing printk_safe buffers during
   panic().

 - Fix performance regression caused by the lockless printk ringbuffer.
   It was visible with huge log buffer and long messages.

 - Documentation fix-up.

* tag 'printk-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  lib/vsprintf: no_hash_pointers prints all addresses as unhashed
  kselftest: add support for skipped tests
  lib: use KSTM_MODULE_GLOBALS macro in kselftest drivers
  printk: avoid prb_first_valid_seq() where possible
  printk: fix deadlock when kernel panic
  printk: rectify kernel-doc for prb_rec_init_wr()

Merge tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit updates from Shuah Khan

 - support for filtering test suites using glob from Daniel Latypov.

     "kunit_filter.glob" command line option is passed to the UML
     kernel, which currently only supports filtering by suite name.
     This support allows running different subsets of tests, e.g.

      $ ./tools/testing/kunit/kunit.py build
      $ ./tools/testing/kunit/kunit.py exec 'list*'
      $ ./tools/testing/kunit/kunit.py exec 'kunit*'

 - several fixes and cleanups also from Daniel Latypov.

* tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: fix unintentional statefulness in run_kernel()
  kunit: tool: add support for filtering suites by glob
  kunit: add kunit.filter_glob cmdline option to filter suites
  kunit: don't show `1 == 1` in failed assertion messages
  kunit: make kunit_tool accept optional path to .kunitconfig fragment
  Documentation: kunit: add tips.rst for small examples
  KUnit: Docs: make start.rst example Kconfig follow style.rst
  kunit: tool: simplify kconfig is_subset_of() logic
  minor: kunit: tool: fix unit test so it can run from non-root dir
  kunit: tool: use `with open()` in unit test
  kunit: tool: stop using bare asserts in unit test
  kunit: tool: fix unit test cleanup handling

Merge tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - dmabuf-heaps test fixes and cleanups from John Stultz

 - seccomp test fix to accept any valid fd in user_notification_addfd

 - Minor fixes to breakpoints and vDSO tests

 - Minor code cleanups to ipc and x86 tests

* tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/seccomp: Accept any valid fd in user_notification_addfd
  selftests/timens: add futex binary to .gitignore
  selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.c
  selftests/vDSO: fix ABI selftest on riscv
  selftests/x86/ldt_gdt: remove unneeded semicolon
  selftests/ipc: remove unneeded semicolon
  kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroed
  kselftests: dmabuf-heaps: Cleanup test output
  kselftests: dmabuf-heaps: Softly fail if don't find a vgem device
  kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNC
  kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir

Pull documentation updates from Jonathan Corbet:
 "It has been a relatively quiet cycle in docsland.

   - As promised, the minimum Sphinx version to build the docs is now
     1.7, and we have dropped support for Python 2 entirely. That
     allowed the removal of a bunch of compatibility code.

   - A set of treewide warning fixups from Mauro that I applied after it
     became clear nobody else was going to deal with them.

   - The automarkup mechanism can now create cross-references from
     relative paths to RST files.

   - More translations, typo fixes, and warning fixes"

* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
  docs: kernel-hacking: be more civil
  docs: Remove the Microsoft rhetoric
  Documentation/admin-guide: kernel-parameters: Update nohlt section
  doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
  docs: Document cross-referencing using relative path
  docs: Enable usage of relative paths to docs on automarkup
  docs: thermal: fix spelling mistakes
  Documentation: admin-guide: Update kvm/xen config option
  docs: Make syscalls' helpers naming consistent
  coding-style.rst: Avoid comma statements
  Documentation: /proc/loadavg: add 3 more field descriptions
  Documentation/submitting-patches: Add blurb about backtraces in commit messages
  Docs: drop Python 2 support
  Move our minimum Sphinx version to 1.7
  Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
  scripts/kernel-doc: add internal hyperlink to DOC: sections
  Update Documentation/admin-guide/sysctl/fs.rst
  docs: Update DTB format references
  docs: zh_CN: add iio index.rst translation
  docs/zh_CN: add iio ep93xx_adc.rst translation
  ...

Pull block IPI updates from Jens Axboe:
 "Avoid IRQ locking for the block IPI handling (Sebastian Andrzej
  Siewior)"

* tag 'for-5.12/block-ipi-2021-02-21' of git://git.kernel.dk/linux-block:
  blk-mq: Use llist_head for blk_cpu_done
  blk-mq: Always complete remote completions requests in softirq
  smp: Process pending softirqs in flush_smp_call_function_from_idle()

Pull iommu updates from Joerg Roedel:

 - ARM SMMU and Mediatek updates from Will Deacon:
     - Support for MT8192 IOMMU from Mediatek
     - Arm v7s io-pgtable extensions for MT8192
     - Removal of TLBI_ON_MAP quirk
     - New Qualcomm compatible strings
     - Allow SVA without hardware broadcast TLB maintenance on SMMUv3
     - Virtualization Host Extension support for SMMUv3 (SVA)
     - Allow SMMUv3 PMU perf driver to be built independently from IOMMU

 - Some tidy-up in IOVA and core code

 - Conversion of the AMD IOMMU code to use the generic IO-page-table
   framework

 - Intel VT-d updates from Lu Baolu:
     - Audit capability consistency among different IOMMUs
     - Add SATC reporting structure support
     - Add iotlb_sync_map callback support

 - SDHI support for Renesas IOMMU driver

 - Misc cleanups and other small improvments

* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
  iommu/amd: Fix performance counter initialization
  MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
  iommu/mediatek: Fix error code in probe()
  iommu/mediatek: Fix unsigned domid comparison with less than zero
  iommu/vt-d: Parse SATC reporting structure
  iommu/vt-d: Add new enum value and structure for SATC
  iommu/vt-d: Add iotlb_sync_map callback
  iommu/vt-d: Move capability check code to cap_audit files
  iommu/vt-d: Audit IOMMU Capabilities and add helper functions
  iommu/vt-d: Fix 'physical' typos
  iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
  iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
  driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
  MAINTAINERS: Add entry for MediaTek IOMMU
  iommu/mediatek: Add mt8192 support
  iommu/mediatek: Remove unnecessary check in attach_device
  iommu/mediatek: Support master use iova over 32bit
  iommu/mediatek: Add iova reserved function
  iommu/mediatek: Support for multi domains
  iommu/mediatek: Add get_domain_id from dev->dma_range_map
  ...

Pull rdma updates from Jason Gunthorpe:
 "This is quite a small cycle, if not for Lee's 70 patches cleaning the
  kdocs it would be well below typical for patch count.

  Most of the interesting work here was in the HNS and rxe drivers which
  got fairly major internal changes.

  Summary:

   - Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa

   - Significant rework in rxe to get it ready to have XRC support added

   - Several rts bug fixes

   - Big series to get to 'make W=1' cleanness, primarily updating kdocs

   - Support for creating a RDMA MR from a DMABUF fd to allow PCI peer
     to peer transfers to GPU VRAM

   - Device disassociation now works properly with umad

   - Work to support more than 255 ports on a RDMA device

   - Further support for the new HNS HIP09 hardware

   - Coding style cleanups: comma to semicolon, unneded semicolon/blank
     lines, remove 'h' printk format, don't check for NULL before kfree,
     use true/false for bool"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits)
  RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
  RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes
  RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
  RDMA/mlx5: Allow CQ creation without attached EQs
  RDMA/rtrs-srv-sysfs: fix missing put_device
  RDMA/rtrs-srv: fix memory leak by missing kobject free
  RDMA/rtrs: Only allow addition of path to an already established session
  RDMA/rtrs-srv: Fix stack-out-of-bounds
  RDMA/rxe: Remove unused pkt->offset
  RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
  RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()
  RDMA/qedr: Use true and false for bool variable
  RDMA/hns: Adjust definition of FRMR fields
  RDMA/hns: Refactor process of posting CMDQ
  RDMA/hns: Adjust fields and variables about CMDQ tail/head
  RDMA/hns: Remove redundant operations on CMDQ
  RDMA/hns: Fixes missing error code of CMDQ
  RDMA/hns: Remove unused member and variable of CMDQ
  RDMA/ipoib: Remove racy Subnet Manager sendonly join checks
  RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver
  ...

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
  is bound to cause conflicts with a trivial change somewhere).

  The only big major rework of note is the one from Hannes trying to
  clean up our result handling code in the drivers to make it
  consistent"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
  scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
  scsi: ufs: Give clk scaling min gear a value
  scsi: lpfc: Fix 'physical' typos
  scsi: megaraid_mbox: Fix spelling of 'allocated'
  scsi: qla2xxx: Simplify the calculation of variables
  scsi: message: fusion: Fix 'physical' typos
  scsi: target: core: Change ASCQ for residual write
  scsi: target: core: Signal WRITE residuals
  scsi: target: core: Set residuals for 4Kn devices
  scsi: hisi_sas: Add trace FIFO debugfs support
  scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
  scsi: hisi_sas: Enable debugfs support by default
  scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
  scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
  scsi: lpfc: Add auto select on IRQ_POLL
  scsi: ncr53c8xx: Fix typos
  scsi: lpfc: Fix ancient double free
  scsi: qla2xxx: Fix some memory corruption
  scsi: qla2xxx: Remove redundant NULL check
  scsi: megaraid: Fix ifnullfree.cocci warnings
  ...

Merge tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix DM integrity's HMAC support to provide enhanced security of
   internal_hash and journal_mac capabilities.

 - Various DM writecache fixes to address performance, fix table output
   to match what was provided at table creation, fix writing beyond end
   of device when shrinking underlying data device, and a couple other
   small cleanups.

 - Add DM crypt support for using trusted keys.

 - Fix deadlock when swapping to DM crypt device by throttling number of
   in-flight REQ_SWAP bios. Implemented in DM core so that other
   bio-based targets can opt-in by setting ti->limit_swap_bios.

 - Fix various inverted logic bugs in the .iterate_devices callout
   functions that are used to assess if specific feature or capability
   is supported across all devices being combined/stacked by DM.

 - Fix DM era target bugs that exposed users to lost writes or memory
   leaks.

 - Add DM core support for passing through inline crypto support of
   underlying devices. Includes block/keyslot-manager changes that
   enable extending this support to DM.

 - Various small fixes and cleanups (spelling fixes, front padding
   calculation cleanup, cleanup conditional zoned support in targets,
   etc).

* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
  dm: fix deadlock when swapping to encrypted device
  dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
  dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
  dm: support key eviction from keyslot managers of underlying devices
  dm: add support for passing through inline crypto support
  block/keyslot-manager: Introduce functions for device mapper support
  block/keyslot-manager: Introduce passthrough keyslot manager
  dm era: only resize metadata in preresume
  dm era: Use correct value size in equality function of writeset tree
  dm era: Fix bitset memory leaks
  dm era: Verify the data block size hasn't changed
  dm era: Reinitialize bitset cache before digesting a new writeset
  dm era: Update in-core bitset after committing the metadata
  dm era: Recover committed writeset after crash
  dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
  dm writecache: fix writing beyond end of underlying device when shrinking
  dm table: remove needless request_queue NULL pointer checks
  dm table: fix zoned iterate_devices based device capability checks
  dm table: fix DAX iterate_devices based device capability checks
  dm table: fix iterate_devices based device capability checks
  ...

Pull devicetree updates from Rob Herring:

 - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
   fdtoverlay

 - Add kbuild support to build DT overlays (%.dtbo)

 - Drop NULLifying match table in of_match_device().

   In preparation for this, there are several driver cleanups to use
   (of_)?device_get_match_data().

 - Drop pointless wrappers from DT struct device API

 - Convert USB binding schemas to use graph schema and remove old plain
   text graph binding doc

 - Convert spi-nor and v3d GPU bindings to DT schema

 - Tree wide schema fixes for if/then schemas, array size constraints,
   and undocumented compatible strings in examples

 - Handle 'no-map' correctly for already reserved memblock regions

* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
  driver core: platform: Drop of_device_node_put() wrapper
  of: Remove of_dev_{get,put}()
  dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
  dt-bindings: can: rcar_canfd: Group tuples in pin control properties
  dt-bindings: power: renesas,apmu: Group tuples in cpus properties
  dt-bindings: mtd: spi-nor: Convert to DT schema format
  dt-bindings: Use portable sort for version cmp
  dt-bindings: ethernet-controller: fix fixed-link specification
  dt-bindings: irqchip: Add node name to PRUSS INTC
  dt-bindings: interconnect: Fix the expected number of cells
  dt-bindings: Fix errors in 'if' schemas
  dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
  dt-bindings: Fix undocumented compatible strings in examples
  kbuild: Add support to build overlays (%.dtbo)
  scripts: dtc: Remove the unused fdtdump.c file
  scripts: dtc: Build fdtoverlay tool
  scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
  scripts: dtc: Fetch fdtoverlay.c from external DTC project
  dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
  dt-bindings: iio: dac: Fix AD5686 references
  ...

Pull gpio updates from Bartosz Golaszewski:
 "It's been a relatively calm release cycle and we're actually removing
  more code than we're adding.

  Summary:

   - new driver for the Toshiba Visconti platform

   - rework of interrupt handling in gpio-tegra

   - updates for GPIO selftests: we're now using the character device to
     perform the subsystem checks

   - support for a new rcar variant + some code refactoring

   - refactoring of gpio-ep93xx

   - SPDX License identifier has been updated in the uapi header so that
     userspace programs bundling it can become fully REUSE-compliant

   - improvements to pwm handling in gpio-mvebu

   - support for interrupt handling and power management for gpio-xilinx
     as well as some code refactoring

   - support for a new chip variant in gpio-pca953x

   - removal of drivers: zte xs & intel-mid and removal of leftovers
     from intel-msic

   - impovements to intel drivers pulled from Andy Shevchenko

   - improvements to the gpio-aggregator virtual GPIO driver

   - and several minor tweaks and fixes to code and documentation all
     over the place"

* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
  gpio: pcf857x: Fix missing first interrupt
  gpio: ep93xx: refactor base IRQ number
  gpio: ep93xx: refactor ep93xx_gpio_add_bank
  gpio: ep93xx: Fix typo s/hierarchial/hierarchical
  gpio: ep93xx: drop to_irq binding
  gpio: ep93xx: Fix wrong irq numbers in port F
  gpio: uapi: use the preferred SPDX license identifier
  gpio: gpio-xilinx: Add check if width exceeds 32
  gpio: gpio-xilinx: Add support for suspend and resume
  gpio: gpio-xilinx: Add interrupt support
  gpio: gpio-xilinx: Reduce spinlock array to array
  gpio: gpio-xilinx: Simplify with dev_err_probe()
  gpio: msic: Drop driver from Makefile
  gpio: wcove: Split out to_ireg() helper and deduplicate the code
  gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
  gpio: wcove: Get rid of error prone casting in IRQ handler
  gpio: intel-mid: Remove driver for deprecated platform
  gpio: msic: Remove driver for deprecated platform
  gpio: aggregator: Remove trailing comma in terminator entries
  gpio: aggregator: Use compound literal from the header
  ...

Pull RTC updates from Alexandre Belloni:
 "Many cleanups and a few drivers removal this cycle.

  Subsystem:
   - Introduce features bitfield and the first feature: RTC_FEATURE_ALARM

  Removed drivers:
   - ab3100
   - coh901331
   - tx4939
   - sirfsoc

  Drivers:
   - use rtc_lock and rtc_unlock instead of opencoding
   - constify all struct rtc_class_ops
   - quiet maybe-unused variable warning
   - replace spin_lock_irqsave with spin_lock in hard IRQ
   - pcf2127: disable Power-On Reset Override and run OTP refresh"

* tag 'rtc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
  rtc: abx80x: Add utility function for writing configuration key
  rtc: pcf2127: properly set flag WD_CD for rtc chips(pcf2129, pca2129)
  rtc: pcf8563: Add NXP PCA8565 compatible
  rtc: s3c: quiet maybe-unused variable warning
  rtc: s3c: stop setting bogus time
  rtc: sd3078: quiet maybe-unused variable warning
  rtc: s35390a: quiet maybe-unused variable warning
  rtc: rx8581: quiet maybe-unused variable warning
  rtc: rx8010: quiet maybe-unused variable warning
  rtc: rv8803: quiet maybe-unused variable warning
  rtc: rv3032: quiet maybe-unused variable warning
  rtc: rv3029: quiet maybe-unused variable warning
  rtc: rv3028: quiet maybe-unused variable warning
  rtc: rs5c372: quiet maybe-unused variable warning
  rtc: pcf85363: quiet maybe-unused variable warning
  rtc: pcf85063: quiet maybe-unused variable warnings
  rtc: meson: quiet maybe-unused variable warning
  rtc: m41t80: quiet maybe-unused variable warning
  rtc: isl1208: quiet maybe-unused variable warning
  rtc: ds3232: quiet maybe-unused variable warning
  ...