- 10 Oct, 2016 2 commits
-
-
Stefan Christ authored
Fix invalid sphinx markup in the comment for the newly added DRM_FB_HELPER_DEFAULT_OPS. Signed-off-by:
Stefan Christ <contact@stefanchrist.eu> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475692454-11543-1-git-send-email-contact@stefanchrist.eu
-
Maxime Ripard authored
Some boards have an entirely passive RGB to VGA bridge, based on DACs implemented by resistor ladders. Those might or might not have an i2c bus routed to the VGA connector in order to access the screen EDIDs. Add a bridge that doesn't do anything but expose the modes available on the screen, either based on the EDIDs if available, or based on the XGA standards. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
-
- 05 Oct, 2016 5 commits
-
-
Chris Wilson authored
dma_buf may live a long time, longer than the last direct user of the driver. We already hold a reference to the owner module (that prevents the object code from disappearing), but there is no reference to the drm_dev - so the pointers to the driver backend themselves may vanish. v2: Resist temptation to fix the bug in armada_gem.c not setting the correct flags on the exported dma-buf (it should pass the flags through and not be arbitrarily setting O_RDWR). Use a common wrapper for exporting the dmabuf and acquiring the reference to the drm_device. Testcase: igt/vgem_basic/unload Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Petri Latvala <petri.latvala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Tested-by:
Petri Latvala <petri.latvala@intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Chris Wilson authored
dma_buf_export() adds a reference to the owning module to the dmabuf (to prevent the driver from being unloaded whilst a third party still refers to the dmabuf). However, drm_gem_prime_export() was passing its own THIS_MODULE (i.e. drm.ko) rather than the driver. Extract the right owner from the device->fops instead. v2: Use C99 initializers to zero out unset elements of dma_buf_export_info v3: Extract the right module from dev->fops. Testcase: igt/vgem_basic/unload Reported-by:
-
Marek Vasut authored
Remove the unnecessary wrapper functions around drm_connector_cleanup(). Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Marek Vasut authored
Add .prepare_fb and .cleanup_fb plane hooks into the drm_simple_kms. These can be used by drivers to call ie. the drm_fb_cma_setup_fence() helper. Signed-off-by:
-
Christophe JAILLET authored
We should use 'ida_simple_remove()' instead of 'ida_remove()' when freeing resources allocated with 'ida_simple_get()'. This as been spotted with the following coccinelle script which tries to detect missing 'ida_simple_remove()' call in error handling paths. /////////////// @@ expression x; identifier l; @@ * x = ida_simple_get(...); ... if (...) { ... } ... if (...) { ... goto l; } ... * l: ... when != ida_simple_remove(...); Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 04 Oct, 2016 24 commits
-
-
Tomeu Vizoso authored
There's no point in enabling PSR when the panel doesn't support it. This also avoids a problem when PSR gets enabled when a CRTC is being disabled, because sometimes in that situation the DSP_HOLD_VALID_INTR interrupt on which we wait will never arrive. This was observed on RK3288 with a panel without PSR (veyron-jaq Chromebook). It's very easy to reproduce by running the kms_rmfb test in IGT a few times. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Tomeu Vizoso authored
So users know whether PSR should be enabled or not. Cc: Yakir Yang <ykk@rock-chips.com> Reviewed-by:
-
Stefan Christ authored
The define DRM_FB_HELPER_DEFAULT_OPS provides the drm_fb_helper default implementations for functions in struct fb_ops. A drm driver can use it like: static struct fb_ops drm_fbdev_cma_ops = { .owner = THIS_MODULE, DRM_FB_HELPER_DEFAULT_OPS, /* driver specific implementations */ }; Suggested-by:Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
It's not that obvious how a driver can all race the atomic commit with handling the completion event. And there's unfortunately a pile of drivers with rather bad event handling which misdirect people into the wrong direction. Try to remedy this by documenting everything better. v2: Type fixes Alex spotted. v3: More typos Alex spotted. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1475229896-6047-1-git-send-email-daniel.vetter@ffwll.ch
-
Emilio López authored
As part of the sync framework destaging, the sync_file.h header was moved, but an entry was not added on Kbuild to install it. This patch resolves this omission so that "make headers_install" installs this header. Fixes: 460bfc41 ("dma-buf/sync_file: de-stage sync_file headers") Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Emilio López <emilio.lopez@collabora.co.uk> Signed-off-by:
-
Joe Perches authored
Remove function name and special " *ERROR*" from argument list $ size drivers/gpu/drm/built-in.o* (x86-32 defconfig, most drm selected) text data bss dec hex filename 5635366 182579 14328 5832273 58fe51 drivers/gpu/drm/built-in.o.new 5779552 182579 14328 5976459 5b318b drivers/gpu/drm/built-in.o.old Using "%ps", __builtin_return_address(0) is the same as "%s", __func__ except for static inlines, but it's more or less the same output. Miscellanea: o Convert args... to ##__VA_ARGS__ o The equivalent DRM_DEV_<FOO> macros are rarely used and not worth conversion Reviewed-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Ville Syrjälä authored
It's perfectly legal for the sink to support 12bpc only for some lower resolution modes, while the higher resolution modes can only be used with 8bpc. So let's take the sink's max TMDS clock into account before we go and decide that a particular mode can be used with 12bpc. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Reduce the eyesore with a local variable. Signed-off-by:
-
Ville Syrjälä authored
drm_edid_to_eld() is just mean to cook up the ELD for the audio driver, so having it parse non-audio related stuff seems just wrong, and potentially could lead to that information not being even filled out if the function doesn't even get called. Let's move that stuff to the place where we parse the color formats and whatnot from the CEA ext block. Signed-off-by:
-
Ville Syrjälä authored
It's not a good idea to leave stale cea_rev in the drm_display_info. The current EDID might not even have a CEA ext block in which case we'd end up leaving the stale value in place. Signed-off-by:
-
Ville Syrjälä authored
Instead of parsing parts of the CEA extension block in two places to determine supported color formats and whatnot, let's just consolidate it to one function. This also makes it possible to neatly flatten drm_assign_hdmi_deep_color_info(). Signed-off-by:
-
Ville Syrjälä authored
We already pass the connector to drm_add_display_info() and drm_assign_hdmi_deep_color_info(), so passing the connector->display_info also is pointless. Signed-off-by:
-
Ville Syrjälä authored
We have the drm_display_info for storing information about the sink, so let's move dvi_dual and max_tmds_clock in there. v2: Deal with superfluous code shuffling Document dvi_dual and max_tmds_clock too Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: -
Ville Syrjälä authored
We generally store clocks in kHz, so let's do that for the HDMI max TMDS clock value as well. Less surpising. v2: Deal with superfluous code shuffling Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by:
-
Ville Syrjälä authored
Clear out old max_tmds_clock and dvi_dual information (possibly from a previous EDID) before parsing the current EDID. Tne current EDID might not even have these in its HDMI VSDB, which would mean that we'd leave the old stale values in place. Signed-off-by:
-
Ville Syrjälä authored
Clear out stale audio latency information (potentially from a previous EDID) before constructing the ELD from the EDID. Signed-off-by:
-
Chris Wilson authored
Currently we use a linear walk to lookup a handle and return a dma-buf, and vice versa. A long overdue TODO task is to convert that to a hashtable. Since the initial implementation of dma-buf/prime, we now have resizeable hashtables we can use (and now a future task is to RCU enable the lookup!). However, this patch opts to use an rbtree instead to provide O(lgN) lookups (and insertion, deletion). rbtrees were chosen over using the RCU backed resizable hashtable to firstly avoid the reallocations (rbtrees can be embedded entirely within the parent struct) and to favour simpler code with predictable worst case behaviour. In simple testing, the difference between using the constant lookup and insertion of the rhashtable and the rbtree was less than 10% of the wall time (igt/benchmarks/prime_lookup) - both are dramatic improvements over the existing linear lists. v2: Favour rbtree over rhashtable Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94631Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
Baoyou Xie authored
We get 4 warnings when building kernel with W=1: drivers/gpu/drm/mediatek/mtk_hdmi.c:1089:6: warning: no previous prototype for 'mtk_hdmi_audio_enable' [-Wmissing-prototypes] drivers/gpu/drm/mediatek/mtk_hdmi.c:1095:6: warning: no previous prototype for 'mtk_hdmi_audio_disable' [-Wmissing-prototypes] drivers/gpu/drm/mediatek/mtk_hdmi.c:1101:5: warning: no previous prototype for 'mtk_hdmi_audio_set_param' [-Wmissing-prototypes] drivers/gpu/drm/mediatek/mtk_hdmi.c:1627:5: warning: no previous prototype for 'mtk_hdmi_audio_digital_mute' [-Wmissing-prototypes] In fact, both functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks both functions with 'static'. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> [seanpaul fixed checkpatch warning for argument alignment] Signed-off-by:
-
Baoyou Xie authored
We get 2 warnings when building kernel with W=1: drivers/gpu/drm/rockchip/rockchip_drm_drv.c:309:6: warning: no previous prototype for 'rockchip_drm_fb_suspend' [-Wmissing-prototypes] drivers/gpu/drm/rockchip/rockchip_drm_drv.c:318:6: warning: no previous prototype for 'rockchip_drm_fb_resume' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by:
-
Baoyou Xie authored
We get 2 warnings when building kernel with W=1: drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:130:5: warning: no previous prototype for 'rockchip_drm_fbdev_init' [-Wmissing-prototypes] drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c:173:6: warning: no previous prototype for 'rockchip_drm_fbdev_fini' [-Wmissing-prototypes] In fact, these functions are declared in drivers/gpu/drm/rockchip/rockchip_drm_fbdev.h, so this patch adds missing header dependencies. Signed-off-by:
-
Laszlo Ersek authored
Before commit a3257256 ("drm: Lobotomize set_busid nonsense for !pci drivers"), several DRM drivers for platform devices used to expose an explicit "drm_driver.set_busid" callback, invariably backed by drm_platform_set_busid(). Commit a3257256 removed drm_platform_set_busid(), along with the referring .set_busid field initializations. This was justified because interchangeable functionality had been implemented in drm_dev_alloc() / drm_dev_init(), which DRM_IOCTL_SET_VERSION would rely on going forward. However, commit a3257256 also removed drm_virtio_set_busid(), for which the same consolidation was not appropriate: this .set_busid callback had been implemented with drm_pci_set_busid(), and not drm_platform_set_busid(). The error regressed Xorg/xserver on QEMU's "virtio-vga" card; the drmGetBusid() function from libdrm would no longer return stable PCI identifiers like "pci:0000:00:02.0", but rather unstable platform ones like "virtio0". Reinstate drm_virtio_set_busid() with judicious use of git checkout -p a3257256^ -- drivers/gpu/drm/virtio Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joachim Frieben <jfrieben@hotmail.com> Cc: stable@vger.kernel.org # v4.8 Reported-by:
Joachim Frieben <jfrieben@hotmail.com> Fixes: a3257256 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1366842Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Daniel Vetter authored
I screwed up rebasing of my patch in commit 43968d7b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Sep 21 10:59:24 2016 +0200 drm: Extract drm_plane.[hc] which meant on error paths drm_crtc_vblank_put could be called without a get, leading to an underrun of the refcount. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98020Reported-and-tested-by:
Andy Furniss <adf.lists@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Michel Dänzer <michel@daenzer.net> Signed-off-by:
-
Chris Wilson authored
Commit 43968d7b ("drm: Extract drm_plane.[hc]") was not the simple cut'n'paste we presumed, somehow it introduced a leak of the page flip target's framebuffer. Fixes: 43968d7b ("drm: Extract drm_plane.[hc]") Signed-off-by:
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This pull request includes, - Code refactoring on HDMI DDC and PHY. - Regression fixup on deadlock issue with G2D pm integration. - Fixup on page fault issue with wait_for_vblank mechianism specific to Exynos drm. - And some cleanups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: g2d: simplify g2d_free_runqueue_node() drm/exynos: g2d: use autosuspend mode for PM runtime drm/exynos: g2d: wait for engine to finish drm/exynos: g2d: remove runqueue nodes in g2d_{close,remove}() drm/exynos: g2d: move PM management to runqueue worker Revert "drm/exynos: g2d: fix system and runtime pm integration" drm/exynos: use drm core to handle page-flip event drm/exynos: mark exynos_dp_crtc_clock_enable() static drm/exynos/fimd: add clock rate checking drm/exynos: fix pending update handling drm/exynos/vidi: use timer for vblanks instead of sleeping worker drm/exynos: g2d: beautify probing message drm/exynos: mixer: simplify loop in vp_win_reset() drm/exynos: mixer: convert booleans to flags in mixer context gpu: drm: exynos_hdmi: Remove duplicate initialization of regulator bulk consumer gpu: drm: exynos_hdmi: Move PHY logic into single function gpu: drm: exynos_hdmi: Move DDC logic into single function
-
- 30 Sep, 2016 9 commits
-
-
Tobias Jakobi authored
The function is never called with zero 'runqueue_node'. Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Tobias Jakobi authored
The runqueue worker currently issues a get() when a new node is processed, and a put() once a node is completed. The corresponding suspend and resume calls currently only do clock gating, but with the upcoming introduction of IOMMU runpm also the corresponding IOMMU domain gets enabled (for get()) and disabled (for put()). This introduces performance regressions with we mitigate here. Switch PM runtime to autosuspend, such that clock gating and IOMMU control only happens when the engine is idle for a 'long' time. Signed-off-by:
-
Tobias Jakobi authored
While the engine works on a runqueue node it does memory access to the buffers associated with that node. Make sure that the engine is idle when g2d_close() and/or g2d_remove() are called, i.e. buffer associated with the process (for g2d_close()), or all buffers (for g2d_remove()) can be safely be unmapped. We have to take into account that the engine might be in an undefined state, i.e. it hangs and doesn't become idle. In this case, we issue a hardware reset to return the hardware and the driver context into a proper state. Signed-off-by:
-
Tobias Jakobi authored
The driver might be closed (and/or removed) while there are still nodes queued for processing. Make sure to remove these nodes, which means all of them in the case of g2d_remove() and only those belonging to the corresponding process in g2d_close(). Signed-off-by:
-
Tobias Jakobi authored
Do all pm_runtime_{get,put}() calls in the runqueue worker. Also keep track of the engine's idle/busy state. Signed-off-by: -
Tobias Jakobi authored
This reverts commit b05984e2. The change, i.e. merging the sleep and runpm operations, produces a deadlock situation: (1) exynos_g2d_exec_ioctl() prepares a runqueue node and calls g2d_exec_runqueue() (2) g2d_exec_runqueue() calls g2d_dma_start() which gets runtime PM sync (3) runtime PM core calls g2d_runtime_resume() (4) g2d_runtime_resume() calls g2d_exec_runqueue(), which loops back to (2) Due to mutexes that are in place, a deadlock situation is created. Signed-off-by:
-
Andrzej Hajda authored
Exynos DRM framework handled page-flip event with custom code. The patch replaces it with drm-core vblank queue. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/gpu/drm/exynos/exynos_dp.c:46:5: warning: no previous prototype for 'exynos_dp_crtc_clock_enable' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. So this patch marks it 'static'. Signed-off-by:
-
Andrzej Hajda authored
In case of some platforms fimd clocks can be configured to very low values, as a result refresh rate can be very low and driver/drm-core will timeout waiting for vblanks, it will result in premature removal of framebuffers and will cause oopses. The patch adds atomic_check callback to fimd to prevent setting such modes. Reported-by:
-
