- 29 Mar, 2021 25 commits
-
-
Lu Wei authored
Modify "unkown" to "unknown" in net/sctp/sm_make_chunk.c and Modify "orginal" to "original" in net/sctp/socket.c. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Lu Wei <luwei32@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lu Wei authored
Modify "beween" to "between" in net/rds/send.c. Reported-by:
-
Colin Ian King authored
The pointer gpio is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== selftest: add tests for packet per second Add self tests for the recently added packet per second rate limiting feature of the TC policer action[1]. The forwarding selftest (patch 2/2) depends on iproute2 support for packet per second rate limiting, which has been posted separately[2] [1] [PATCH v3 net-next 0/3] net/sched: act_police: add support for packet-per-second policing https://lore.kernel.org/netdev/20210312140831.23346-1-simon.horman@netronome.com/ [2] [PATCH iproute2-next] police: add support for packet-per-second rate limiting https://lore.kernel.org/netdev/20210326125018.32091-1-simon.horman@netronome.com/ ==================== Signed-off-by: -
Baowen Zheng authored
Test tc-police action for packets per second. The test is mainly in scenarios Rx policing and Tx policing. The test passes with veth pairs ports. Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Baowen Zheng authored
Add selftest cases in action police for packets per second. These tests depend on corresponding iproute2 command support. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/wouldnt/wouldn\'t/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by:
-
Bhaskar Chowdhury authored
s/sucessful/successful/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/simulataneous/simultaneous/ ....in three dirrent places. s/tempory/temporary/ s/interpeter/interpreter/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/ingoring/ignoring/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/synching/syncing/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/Accouting/Accounting/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/registerd/registered/ Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Bhaskar Chowdhury authored
s/Firware/Firmware/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/concerened/concerned/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/assocaited/associated/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/searchs/searches/ ....two different places. Signed-off-by:
-
Bhaskar Chowdhury authored
s/synchonization/synchronization/ s/aready/already/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/unitialized/uninitialized/ s/notifcations/notifications/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/notfication/notification/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/Identifers/Identifiers/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/resrved/reserved/ s/within/within/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/readibility/readability/ s/insufficent/insufficient/ Signed-off-by:
-
Bhaskar Chowdhury authored
s/initalized/initialized/ ...three different places Signed-off-by:
-
Bhaskar Chowdhury authored
s/facilties/facilities/ Signed-off-by:
-
- 26 Mar, 2021 15 commits
-
-
Liu Jian authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by:
Liu Jian <liujian56@huawei.com> Signed-off-by:
-
David S. Miller authored
Yang Yingliang says: ==================== net: llc: Correct some function names in header Fix some make W=1 kernel build warnings in net/llc/ ==================== Signed-off-by: -
Yang Yingliang authored
Fix the following make W=1 kernel build warning: net/llc/llc_pdu.c:36: warning: expecting prototype for pdu_set_pf_bit(). Prototype was for llc_pdu_set_pf_bit() instead Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Fix the following make W=1 kernel build warning: net/llc/llc_s_ac.c:38: warning: expecting prototype for llc_sap_action_unit_data_ind(). Prototype was for llc_sap_action_unitdata_ind() instead Reported-by:
-
Yang Yingliang authored
Fix the following make W=1 kernel build warning: net/llc/llc_c_ev.c:622: warning: expecting prototype for conn_ev_qlfy_last_frame_eq_1(). Prototype was for llc_conn_ev_qlfy_last_frame_eq_1() instead net/llc/llc_c_ev.c:636: warning: expecting prototype for conn_ev_qlfy_last_frame_eq_0(). Prototype was for llc_conn_ev_qlfy_last_frame_eq_0() instead Reported-by:
-
Hoang Le authored
Fix kernel-doc warning introduced in commit b83e214b ("tipc: add extack messages for bearer/media failure"): net/tipc/bearer.c:248: warning: Function parameter or member 'extack' not described in 'tipc_enable_bearer' Fixes: b83e214b ("tipc: add extack messages for bearer/media failure") Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by:
-
Mohammad Athari Bin Ismail authored
In this patch, "net: stmmac: support FPE link partner hand-shaking procedure", priv->plat->fpe_cfg wouldn`t be "devm_kzalloc"ed if dma_cap->frpsel is 0 (Flexible Rx Parser is not supported in SoC) in tc_init(). So, fpe_cfg will be remain as NULL and accessing it will cause kernel panic. To fix this, move the "devm_kzalloc"ing of priv->plat->fpe_cfg before dma_cap->frpsel checking in tc_init(). Additionally, checking of priv->dma_cap.fpesel is added before calling stmmac_fpe_link_state_handle() as only FPE supported SoC is allowed to call the function. Below is the kernel panic dump reported by Marek Szyprowski <m.szyprowski@samsung.com>: meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=35) meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode Unable to handle kernel NULL pointer dereference at virtual address 0000000000000001 Mem abort info: ... user pgtable: 4k pages, 48-bit VAs, pgdp=00000000044eb000 [0000000000000001] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: dw_hdmi_i2s_audio dw_hdmi_cec meson_gxl realtek meson_gxbb_wdt snd_soc_meson_axg_sound_card dwmac_generic axg_audio meson_dw_hdmi crct10dif_ce snd_soc_meson_card_utils snd_soc_meson_axg_tdmout panfrost rc_odroid gpu_sched reset_meson_audio_arb meson_ir snd_soc_meson_g12a_tohdmitx snd_soc_meson_axg_frddr sclk_div clk_phase snd_soc_meson_codec_glue dwmac_meson8b snd_soc_meson_axg_fifo stmmac_platform meson_rng meson_drm stmmac rtc_meson_vrtc rng_core meson_canvas pwm_meson dw_hdmi mdio_mux_meson_g12a pcs_xpcs snd_soc_meson_axg_tdm_interface snd_soc_meson_axg_tdm_formatter nvmem_meson_efuse display_connector CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.12.0-rc4-next-20210325+ Hardware name: Hardkernel ODROID-C4 (DT) Workqueue: events_power_efficient phylink_resolve pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) pc : stmmac_mac_link_up+0x14c/0x348 [stmmac] lr : stmmac_mac_link_up+0x284/0x348 [stmmac] ... Call trace: stmmac_mac_link_up+0x14c/0x348 [stmmac] phylink_resolve+0x104/0x420 process_one_work+0x2a8/0x718 worker_thread+0x48/0x460 kthread+0x134/0x160 ret_from_fork+0x10/0x18 Code: b971ba60 350007c0 f958c260 f9402000 (39400401) ---[ end trace 0c9deb6c510228aa ]--- Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Tested-by:
-
Xu Jia authored
Remove duplicated include from mtk_ppe_offload.c. Reported-by:
Xu Jia <xujia39@huawei.com> Signed-off-by:
-
David S. Miller authored
Robert Hancock says: ==================== axienet clock additions Add support to the axienet driver for controlling all of the clocks that the logic core may utilize. Changed since v3: -Added Acked-by to patch 1 -Now applies to net-next tree after earlier patches merged in - code unchanged from v3 Changed since v2: -Additional clock description clarification Changed since v1: -Clarified clock usages in documentation and code comments ==================== Signed-off-by: -
Robert Hancock authored
This driver was only enabling the first clock on the device, regardless of its name. However, this controller logic can have multiple clocks which should all be enabled. Add support for enabling additional clocks. The clock names used are matching those used in the Xilinx version of this driver as well as the Xilinx device tree generator, except for mgt_clk which is not present there. For backward compatibility, if no named clocks are present, the first clock present is used for determining the MDIO bus clock divider. Reviewed-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Robert Hancock authored
Update DT bindings to describe all of the clocks that the axienet driver will now be able to make use of. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
David S. Miller authored
Taehee Yoo says: ==================== mld: change context from atomic to sleepable This patchset changes the context of MLD module. Before this patchset, MLD functions are atomic context so it couldn't use sleepable functions and flags. There are several reasons why MLD functions are under atomic context. 1. It uses timer API. Timer expiration functions are executed in the atomic context. 2. atomic locks MLD functions use rwlock and spinlock to protect their own resources. So, in order to switch context, this patchset converts resources to use RCU and removes atomic locks and timer API. 1. The first patch convert from the timer API to delayed work. Timer API is used for delaying some works. MLD protocol has a delay mechanism, which is used for replying to a query. If a listener receives a query from a router, it should send a response after some delay. But because of timer expire function is executed in the atomic context, this patch convert from timer API to the delayed work. 2. The fourth patch deletes inet6_dev->mc_lock. The mc_lock has protected inet6_dev->mc_tomb pointer. But this pointer is already protected by RTNL and it isn't be used by datapath. So, it isn't be needed and because of this, many atomic context critical sections are deleted. 3. The fifth patch convert ip6_sf_socklist to RCU. ip6_sf_socklist has been protected by ipv6_mc_socklist->sflock(rwlock). But this is already protected by RTNL So if it is converted to use RCU in order to be used in the datapath, the sflock is no more needed. So, its control path context can be switched to sleepable. 4. The sixth patch convert ip6_sf_list to RCU. The reason for this patch is the same as the previous patch. 5. The seventh patch convert ifmcaddr6 to RCU. The reason for this patch is the same as the previous patch. 6. Add new workqueues for processing query/report event. By this patch, query and report events are processed by workqueue So context is sleepable, not atomic. While this logic, it acquires RTNL. 7. Add new mc_lock. The purpose of this lock is to protect per-interface mld data. Per-interface mld data is usually used by query/report event handler. So, query/report event workers need only this lock instead of RTNL. Therefore, it could reduce bottleneck. Changelog: v2 -> v3: 1. Do not use msecs_to_jiffies(). (by Cong Wang) 2. Do not add unnecessary rtnl_lock() and rtnl_unlock(). (by Cong Wang) 3. Fix sparse warnings because of rcu annotation. (by kernel test robot) - Remove some rcu_assign_pointer(), which was used for non-rcu pointer. - Add union for rcu pointer. - Use rcu API in mld_clear_zeros(). - Remove remained rcu_read_unlock(). - Use rcu API for tomb resources. 4. withdraw prevopus 2nd and 3rd patch. - "separate two flags from ifmcaddr6->mca_flags" - "add a new delayed_work, mc_delrec_work" 5. Add 6th and 7th patch. v1 -> v2: 1. Withdraw unnecessary refactoring patches. (by Cong Wang, Eric Dumazet, David Ahern) a) convert from array to list. b) function rename. 2. Separate big one patch into small several patches. 3. Do not rename 'ifmcaddr6->mca_lock'. In the v1 patch, this variable was changed to 'ifmcaddr6->mca_work_lock'. But this is actually not needed. 4. Do not use atomic_t for 'ifmcaddr6->mca_sfcount' and 'ipv6_mc_socklist'->sf_count'. 5. Do not add mld_check_leave_group() function. 6. Do not add ip6_mc_del_src_bulk() function. 7. Do not add ip6_mc_add_src_bulk() function. 8. Do not use rcu_read_lock() in the qeth_l3_add_mcast_rtnl(). (by Julian Wiedmann) ==================== Signed-off-by: -
Taehee Yoo authored
The purpose of this lock is to avoid a bottleneck in the query/report event handler logic. By previous patches, almost all mld data is protected by RTNL. So, the query and report event handler, which is data path logic acquires RTNL too. Therefore if a lot of query and report events are received, it uses RTNL for a long time. So it makes the control-plane bottleneck because of using RTNL. In order to avoid this bottleneck, mc_lock is added. mc_lock protect only per-interface mld data and per-interface mld data is used in the query/report event handler logic. So, no longer rtnl_lock is needed in the query/report event handler logic. Therefore bottleneck will be disappeared by mc_lock. Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
When query/report packets are received, mld module processes them. But they are processed under BH context so it couldn't use sleepable functions. So, in order to switch context, the two workqueues are added which processes query and report event. In the struct inet6_dev, mc_{query | report}_queue are added so it is per-interface queue. And mc_{query | report}_work are workqueue structure. When the query or report event is received, skb is queued to proper queue and worker function is scheduled immediately. Workqueues and queues are protected by spinlock, which is mc_{query | report}_lock, and worker functions are protected by RTNL. Suggested-by: -
Taehee Yoo authored
The ifmcaddr6 has been protected by inet6_dev->lock(rwlock) so that the critical section is atomic context. In order to switch this context, changing locking is needed. The ifmcaddr6 actually already protected by RTNL So if it's converted to use RCU, its control path context can be switched to sleepable. Suggested-by:
-
