Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

So let's remove everythig that only make sense for a kernel module and
build the thing unconditionally.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

So let's remove everything that only makes sense for kernel modules.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

So let's remove everything that only makes sense for kernel modules.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This simplifies code a lot by dropping many per-revision-group
functions. There are still some paths left that use uncommon NVRAM read
helpers or fill arrays. They will need to be handled in separated patch.

I've tested this (by printing SPROM content) for regressions on:
1) BCM4704 (SPROM revision 2)
2) BCM4706 (SPROM revision 8 plus 11 & 9 on extra WiFi cards)
The only difference is not reading board_type from SPROM rev 11 which is
unsupported and treated as rev 1. This change for rev 1 is expected.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9660/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Handling many SPROM revisions became messy, we have tons of functions
specific to various revision groups which are quite hard to track.
For years there is yet another revision 11 asking for support, but
adding it in current the form would make things even worse.
To resolve this problem let's add new function with table-like entries
that will contain revision bitmask for every SPROM variable.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9659/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

!CONFIG_DEBUG_ZBOOT doesn't need puts() and puthex(), remove them and
the corrospindig strings for !CONFIG_DEBUG_ZBOOT, as a result, it saves
about 1280 bytes.

[ralf@linux-mips.org: Resolved reject.]
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1898/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9656/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9655/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Replace sscanf() with mac_pton().

[ralf@linux-mips.org: Resolved conflict.]
Signed-off-by: Daniel Walter <dwalter@google.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7151/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove the function proc_dolasatint() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8868/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When dealing with whole flash content (bcm47xx_nvram_init_from_mem) we
need to find NVRAM start trying various partition sizes (nvram_sizes).
This is not needed when using MTD as we have direct partition access.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9652/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

For years Broadcom devices use 64 KiB NVRAM partition size and some of
them indeed have it filled in more than 50%. This change allows reading
whole NVRAM e.g. on Netgear WNDR4500 and Netgear R8000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9651/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We use IO functions like readl & ioremap_nocache, so include linux/io.h
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9650/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix the 74K D-cache alias erratum workaround so that it actually works.
Our current code sets MIPS_CACHE_VTAG for the D-cache, but that flag
only has any effect for the I-cache.  Additionally MIPS_CACHE_PINDEX is
set for the D-cache if CP0.Config7.AR is also set for an affected
processor, leading to confusing information in the bootstrap log (the
flag isn't used beyond that).

So delete the setting of MIPS_CACHE_VTAG and rely on MIPS_CACHE_ALIASES,
set in a common place, removing I-cache coherency issues seen in GDB
testing with software breakpoints, gdbserver and ptrace(2), on affected
systems.

While at it add a little piece of explanation of what CP0.Config6.SYND
is so that people do not have to chase documentation.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8507/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS architecture code does not provide copy_user_page,
so it should not provide a prototype for it either.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9266/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This add south-bridge (SB700/SB710/SB800 chipset) ACPI platform driver
for Loongson-3. This will be used by EC (Embedded Controller, used by
laptops) driver and STR (Suspend To RAM).

[ralf@linux-mips.org: Fix build error if !CONFIG_CPU_LOONGSON3.  Build
doesn't like it if no obj-* variable is defined at all in a Makefile.
Obviously this has not been tested on other platforms.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9619/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This add CPU Hwmon (temperature sensor) platform driver for Loongson-3.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9617/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch enable hardware performance counter support for Loongson-3's
perf events.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9618/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On SGI Origin 2k/Onyx2 and SGI Octane systems, there can exist multiple PCI
buses attached to the Xtalk bus.  The current code will stop counting PCI buses
after it finds the first one.  If one installs the optional PCI cardcage
("shoebox") into these systems, because of the order of the Xtalk widgets, the
current PCI code will find the cardcage first, and fail to detect the BaseIO
PCI devices, which are on a higher Xtalk widget ID.

This patch adds the hooks needed for resolving this issue in the IP27 PCI code
(in a later patch).

Verified on both an SGI Onyx2 and an SGI Octane.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: Linux MIPS List <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9074/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Use the normal return values for bool functions
Signed-off-by: Joe Perches <joe@perches.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9640/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When hardware checksum generation is switched on the checksum
generation was only being signalled to the hardware correctly
in Big Endian mode.
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9634/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The octeon crypto co-processor expects values to be big endian.
Wrap the data transfers with cpu_to_be64() and be64_to_cpu()
transformations.

This passes for all the MD5 test vectors in crypto/testmgr.h
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9631/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9635/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

64 bit access is unaffected but for 32 bit access, swap high and
low words.  Similarly for 16 bit access, reverse the order of the
four possible words, and for 8 bit access reverse the order of byte
accesses.
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9630/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9629/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Although the proper way to do this for bitfields would be to use
the macro that Ralf has provided, this is a little easier to
understand as a diff.
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9628/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

So let's remove everything that only makes sense for kernel modules.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This allows the kernel to correctly detect an R16000 MIPS CPU on systems that
have those.  Otherwise, such systems will detect the CPU as an R14000, due to
similarities in the CPU PRId value.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: Linux MIPS List <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9092/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As an alternative to the "clock-frequency" property, allow the GIC
timer operating clock to be specified in the device-tree instead.
This is useful on systems which use common clock or where the GIC
is not fixed to a particular frequency and is instead, for example,
derived from the CPU clock.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9309/

Computing sum introduces true data dependency. This patch removes some
true data depdendencies, hence increases instruction level parallelism.

This patch brings up to 50% csum performance gain on Loongson 3a.

One example about how this patch works is in CSUM_BIGCHUNK1:
// ** original **    vs    ** patch applied **
    ADDC(sum, t0)           ADDC(t0, t1)
    ADDC(sum, t1)           ADDC(t2, t3)
    ADDC(sum, t2)           ADDC(sum, t0)
    ADDC(sum, t3)           ADDC(sum, t2)

In the original implementation, each ADDC(sum, ...) depends on the sum
value updated by previous ADDC(as source operand).

With this patch applied, the first two ADDC operations are independent,
hence can be executed simultaneously if possible.

Another example is in the "copy and sum calculating chunk":
// ** original **    vs    ** patch applied **
    STORE(t0, UNIT(0) ...   STORE(t0, UNIT(0) ...
    ADDC(sum, t0)           ADDC(t0, t1)
    STORE(t1, UNIT(1) ...   STORE(t1, UNIT(1) ...
    ADDC(sum, t1)           ADDC(sum, t0)
    STORE(t2, UNIT(2) ...   STORE(t2, UNIT(2) ...
    ADDC(sum, t2)           ADDC(t2, t3)
    STORE(t3, UNIT(3) ...   STORE(t3, UNIT(3) ...
    ADDC(sum, t3)           ADDC(sum, t2)

With this patch applied, ADDC and the **next next** ADDC are independent.
Signed-off-by: chenj <chenj@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9608/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[ralf@linux-mips.org: Fixed conflicts.]
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: Paul Walmsley <paul@pwsan.com>
Patchwork: https://patchwork.linux-mips.org/patch/8665/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

DSR-1000N board has two GPIO LEDs next to USB ports. Add support for them.

[ralf@linux-mips.org: Resolved conflict due to the moving of the DTS files
into vendor subdirectories.]
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9624/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch has no functional changes, it just to keep the assembler
code to a minimum. Files and functions naming is borrowed from X86.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9616/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9621/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

With no I2C driver available, keeping the platform device registration
makes no sense just as keeping the code to instantiage the I2C devices.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>