Signed-off-by: Chris Mason <chris.mason@oracle.com>

Signed-off-by: Chris Mason <chris.mason@oracle.com>

If we don't stop them, they linger around corrupting
memory by using pointers to freed things.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The scrub readahead branch brought in a new error handling hook,
but it was leaking extent_buffer references.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The new ioctls to follow backrefs are not clean for 32/64 bit
compat.  This reworks them for u64s everywhere.  They are brand new, so
there are no problems with changing the interface now.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Conflicts:
	fs/btrfs/Makefile
	fs/btrfs/extent_io.c
	fs/btrfs/extent_io.h
	fs/btrfs/scrub.c
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Conflicts:
	fs/btrfs/ctree.h
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We all keep getting those stupid warnings from use_block_rsv when running
stress.sh, and it's because the delayed insertion stuff is being stupid.  It's
not the delayed insertion stuffs fault, it's all just stupid.  When marking an
inode dirty for oh say updating the time on it, we just do a
btrfs_join_transaction, which doesn't reserve any space.  This is stupid because
we're going to have to have space reserve to make this change, but we do it
because it's fast because chances are we're going to call it over and over again
and it doesn't matter.  Well thanks to the delayed insertion stuff this is
mostly the case, so we do actually need to make this reservation.  So if
trans->bytes_reserved is 0 then try to do a normal reservation.  If not return
ENOSPC which will make the btrfs_dirty_inode start a proper transaction which
will let it do the whole ENOSPC dance and reserve enough space for the delayed
insertion to steal the reservation from the transaction.

The other stupid thing we do is not reserve space for the inode when writing to
the thing.  Usually this is ok since we have to update the time so we'd have
already done all this work before we get to the endio stuff, so it doesn't
matter.  But this is stupid because we could write the data after the
transaction commits where we changed the mtime of the inode so we have to cow
all the way down to the inode anyway.  This used to be masked by the delalloc
reservation stuff, but because we delay the update it doesn't get masked in this
case.  So again the delayed insertion stuff bites us in the ass.  So if our
trans->block_rsv is delalloc, just steal the reservation from the delalloc
reserve.  Hopefully this won't bite us in the ass, but I've said that before.

With this patch stress.sh no longer spits out those stupid warnings (famous last
words).  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Failure testing was tripping up over stale PageError bits in
metadata pages.  If we have an io error on a block, and later on
end up reusing it, nobody ever clears PageError on those pages.

During commit, we'll find PageError and think we had trouble writing
the block, which will lead to aborts and other problems.

This changes clean_tree_block and the btrfs writepage code to
clear the PageError bit.  In both cases we're either completely
done with the page or the page has good stuff and the error bit
is no longer valid.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Because of the overcommit stuff I had to make it so that we committed the
transaction all the time in reserve_metadata_bytes in case we had overcommitted
because of delayed items.  This was because previously we had no way of knowing
how much space was reserved for delayed items.  Now that we have the
delayed_block_rsv we can check it to see if committing the transaction would get
us anywhere.  This patch breaks out the committing logic into a helper function
that will check to see if committing the transaction would free enough space for
us to get anything done.  With this patch xfstests 83 goes from taking 445
seconds to taking 28 seconds on my box.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

I've been hitting warnings in use_block_rsv when running the delayed insertion
stuff.  It's because we will readjust global block rsv based on what is in use,
which means we could end up discarding reservations that are for the delayed
insertion stuff.  So instead create a seperate block rsv for the delayed
insertion stuff.  This will also make it easier to debug problems with the
delayed insertion reservations since we will know that only the delayed
insertion code touches this block_rsv.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This takes some of the free space in the btrfs super block
to record information about most of the roots in the last four
commits.

It also adds a -o recovery to use the root history log when
we're not able to read the tree of tree roots, the extent
tree root, the device tree root or the csum root.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

fs_info has now ~9kb, more than fits into one page. This will cause
mount failure when memory is too fragmented. Top space consumers are
super block structures super_copy and super_for_commit, ~2.8kb each.
Allocate them dynamically. fs_info will be ~3.5kb. (measured on x86_64)

Add a wrapper for freeing fs_info and all of it's dynamically allocated
members.
Signed-off-by: David Sterba <dsterba@suse.cz>

We no longer use the orphan block rsv for holding the reservation for truncating
the inode, so instead use the global block rsv and check to make sure it has
enough space for us to truncate the space.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

I fixed a problem where we weren't reserving space for an orphan item when we
had to fallback to using the global reserve for an unlink, but I introduced
another problem.  I was migrating the bytes from the transaction reserve to the
global reserve and then releasing from the global reserve in
btrfs_end_transaction().  The problem with this is that a migrate will jack up
the size for the destination, but leave the size alone for the source, with the
idea that you can do a release normally on the source and it all washes out, and
then you can do a release again on the destination and it works out right.  My
way was skipping the release on the trans_block_rsv which still had the jacked
up size from our original reservation.  So instead release manually from the
global reserve if this transaction was using it, and then set the
trans->block_rsv back to the trans_block_rsv so that btrfs_end_transaction
cleans everything up properly.  With this patch xfstest 83 doesn't emit warnings
about leaking space.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

write_cache_pages tries to build up a large bio to stuff down the pipe.
But if it needs to wait for a page lock, it needs to make sure and send
down any pending writes so we don't deadlock with anyone who has the
page lock and is waiting for writeback of things inside the bio.

Dave Sterba triggered this as a deadlock between the autodefrag code and
the extent write_cache_pages
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The tree log had two important bugs that could cause corruptions after a
crash.  Sometimes we were allowing tree log blocks to be reused after
the tree log was committed but before the transaction commit was done.

This allowed a future metadata write to overwrite the tree log data.  It
is fixed by adding a new variant of freeing reserved extents that always
pins them.  Credit goes to Stefan Behrens and Arne Jansen for many many
hours spent tracking this bug down.

During tree log replay, we do a pass through the tree log and pin all
the extents we find.  This makes sure the replay code won't go in and
use any of those blocks for new allocations during replay.  The problem
is the free space cache isn't honoring these pinned extents.  So the
allocator can end up handing them out, leading to all kinds of problems
during replay.

The fix here is to force any free space cache to load while we pin the
extents, and then to make sure we remove the pinned extents from the
free space rbtree.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Stefan Behrens <sbehrens@giantdisaster.de>

btrfs_remove_free_space needs to make sure to set ret back to a
valid return value after setting it to EAGAIN, otherwise we return
it to the callers.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When we're doing log commits, we try to wait for more writers to come in
and make the commit bigger.  This helps improve performance on rotating
disks, but on SSDs it adds latencies.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The WARN_ON under some circumstances heavily polute log and slow down
the machine. This is just a safety, as the warning should be fixed by
another patch, nevertheless, it still pops up during testing.
Signed-off-by: David Sterba <dsterba@suse.cz>

There's a missing test whether the path passed to subvol=path option
during mount is a real subvolume, allowing any directory located in
default subovlume to be passed and accepted for mount.

(current btrfs progs prevent this early)
$ btrfs subvol snapshot . p1-snap
ERROR: '.' is not a subvolume

(with "is subvolume?" test bypassed)
$ btrfs subvol snapshot . p1-snap
Create a snapshot of '.' in './p1-snap'

$ btrfs subvol list -p .
ID 258 parent 5 top level 5 path subvol
ID 259 parent 5 top level 5 path subvol1
ID 260 parent 5 top level 5 path default-subvol1
ID 262 parent 5 top level 5 path p1/p1-snapshot
ID 263 parent 259 top level 5 path subvol1/subvol1-snap

The problem I see is that this makes a false impression of snapshotting the
given subvolume but in fact snapshots the default one: a user expects outcome
like ID 263 but in fact gets ID 262 .

This patch makes mount fail with EINVAL with a message in syslog.
Signed-off-by: David Sterba <dsterba@suse.cz>

* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix superpage support in pfn_to_dma_pte()
  intel-iommu: set iommu_superpage on VM domains to lowest common denominator
  intel-iommu: fix return value of iommu_unmap() API
  MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move
  intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.
  intel-iommu: Workaround IOTLB hang on Ironlake GPU
  intel-iommu: Fix AB-BA lockdep report

* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
  dm kcopyd: fix job_pool leak

Commit 4b239f45 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume.  It doesn't happen always, overall rate is about 1/20.  But,
like other bugs, once when this happens, it continues to happen.

This patch fixes the problem by essentially reverting the memory
assignment in the older way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix memory leak introduced by commit a6e50b40
(dm snapshot: skip reading origin when overwriting complete chunk).

When allocating a set of jobs from kc->job_pool, job->master_job must be
set (to point to itself) so that the mempool item gets freed when the
master_job completes.

master_job was introduced by commit c6ea41fb
(dm kcopyd: preallocate sub jobs to avoid deadlock)
Reported-by: Michael Leun <ml@newton.leun.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

* 'samsung-fixes-4' of git://github.com/kgene/linux-samsung:
  ARM: S3C24XX: Fix s3c24xx build errors if !CONFIG_PM
  ARM: S5P: fix offset calculation on gpio-interrupt

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83627ehf) Fix negative 8-bit temperature values

v2:
- register_syscore_ops(&s3c24xx_irq_syscore_ops) does not need to be
  conditionally compiled out, it is already optimized out on !CONFIG_PM
- fix also s3c2412 and s3c2416 affected by the same build issue

v1:
s3c2440.c fails to build if !CONFIG_PM because in such case
s3c2410_pm_syscore_ops is not defined. Same error should happen also
in s3c2410.c and s3c2442.c
Signed-off-by: Domenico Andreoli <cavokz@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

* git://github.com/herbertx/crypto:
  crypto: ghash - Avoid null pointer dereference if no key is set

* 'fix/hda' of git://github.com/tiwai/sound:
  ALSA: HDA: conexant support for Lenovo T520/W520
  ALSA: hda - Add position_fix quirk for Dell Inspiron 1010

The ghash_update function passes a pointer to gf128mul_4k_lle which will
be NULL if ghash_setkey is not called or if the most recent call to
ghash_setkey failed to allocate memory.  This causes an oops.  Fix this
up by returning an error code in the null case.

This is trivially triggered from unprivileged userspace through the
AF_ALG interface by simply writing to the socket without setting a key.

The ghash_final function has a similar issue, but triggering it requires
a memory allocation failure in ghash_setkey _after_ at least one
successful call to ghash_update.

  BUG: unable to handle kernel NULL pointer dereference at 00000670
  IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul]
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc

  Pid: 1502, comm: hashatron Tainted: G        W   3.1.0-rc9-00085-ge9308cfd #32 Bochs Bochs
  EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0
  EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul]
  EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000
  ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4
   DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
  Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000)
  Stack:
   00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000
   00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc
   00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000
  Call Trace:
   [<c101a520>] ? kmap_atomic_prot+0x37/0xa6
   [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic]
   [<c11676ed>] crypto_shash_update+0x18/0x1b
   [<c11679ad>] shash_ahash_update+0x22/0x36
   [<c11679cc>] shash_async_update+0xb/0xd
   [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash]
   [<c121b24c>] kernel_sendpage+0x39/0x4e
   [<d88ce000>] ? 0xd88cdfff
   [<c121b298>] sock_sendpage+0x37/0x3e
   [<c121b261>] ? kernel_sendpage+0x4e/0x4e
   [<c10b4dbc>] pipe_to_sendpage+0x56/0x61
   [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b51f5>] __splice_from_pipe+0x36/0x55
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b6383>] splice_from_pipe+0x51/0x64
   [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c
   [<c10b63d5>] generic_splice_sendpage+0x13/0x15
   [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10
   [<c10b527f>] do_splice_from+0x5d/0x67
   [<c10b6865>] sys_splice+0x2bf/0x363
   [<c129373b>] ? sysenter_exit+0xf/0x16
   [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f
   [<c129370c>] sysenter_do_call+0x12/0x32
  Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f
  EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4
  CR2: 0000000000000670
  ---[ end trace 4eaa2a86a8e2da24 ]---
  note: hashatron[1502] exited with preempt_count 1
  BUG: scheduling while atomic: hashatron/1502/0x10000002
  INFO: lockdep is turned off.
  [...]
Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Cc: stable@kernel.org [2.6.37+]
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Offsets of the irq controller registers were calculated
correctly only for first GPIO bank. This patch fixes
calculation of the register offsets for all GPIO banks.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Add alignment flag to PCI expansion resources
  sparc: Avoid calling sigprocmask()
  sparc: Use set_current_blocked()
  sparc32,leon: SRMMU MMU Table probe fix

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fib_rules: fix unresolved_rules counting
  r8169: fix wrong eee setting for rlt8111evl
  r8169: fix driver shutdown WoL regression.
  ehea: Change maintainer to me
  pptp: pptp_rcv_core() misses pskb_may_pull() call
  tproxy: copy transparent flag when creating a time wait
  pptp: fix skb leak in pptp_xmit()
  bonding: use local function pointer of bond->recv_probe in bond_handle_frame
  smsc911x: Add support for SMSC LAN89218
  tg3: negate USE_PHYLIB flag check
  netconsole: enable netconsole can make net_device refcnt incorrent
  bluetooth: Properly clone LSM attributes to newly created child connections
  l2tp: fix a potential skb leak in l2tp_xmit_skb()
  bridge: fix hang on removal of bridge via netlink
  x25: Prevent skb overreads when checking call user data
  x25: Handle undersized/fragmented skbs
  x25: Validate incoming call user data lengths
  udplite: fast-path computation of checksum coverage
  IPVS netns shutdown/startup dead-lock
  netfilter: nf_conntrack: fix event flooding in GRE protocol tracker

Fix a bug introduced by 20b45077.  We have to return EINVAL on mount
failure, but doing that too early in the sequence leaves all of the
devices opened exclusively.  This also fixes an issue where under some
scenarios only a second mount -o degraded <devices> command would
succeed.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Initialize fs_info->bdev_holder a bit earlier to be able to pass a
correct holder id to blkdev_get() when opening seed devices with O_EXCL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

If lookup_extent_backref fails, path->nodes[0] reasonably could be
null along with other callers of btrfs_print_leaf, so ensure we have a
valid extent buffer before dereferencing.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>