Skip to content

L
linux
Switch branch/tag
  1. 08 Feb, 2023 13 commits
  3. 07 Feb, 2023 5 commits
    • Devid Antonio Filoni's avatar
      can: j1939: do not wait 250 ms if the same addr was already claimed · 4ae5e1e9
      Devid Antonio Filoni authored 
      The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
  d) No CF shall begin, or resume, transmission on the network until 250
     ms after it has successfully claimed an address except when
     responding to a request for address-claimed.

But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.

As stated in "4.4.2.3 - Address-claimed message":
  In order to successfully claim an address, the CF sending an address
  claimed message shall not receive a contending claim from another CF
  for at least 250 ms.

As stated in "4.4.3.2 - NAME management (NM) message":
  1) A commanding CF can
     d) request that a CF with a specified NAME transmit the address-
        claimed message with its current NAME.
  2) A target CF shall
     d) send an address-claimed message in response to a request for a
        matching NAME

Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.

Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).
Signed-off-by: default avatarDevid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      4ae5e1e9
    • Jiri Pirko's avatar
      devlink: change port event netdev notifier from per-net to global · 565b4824
      Jiri Pirko authored 
      Currently only the network namespace of devlink instance is monitored
for port events. If netdev is moved to a different namespace and then
unregistered, NETDEV_PRE_UNINIT is missed which leads to trigger
following WARN_ON in devl_port_unregister().
WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET);

Fix this by changing the netdev notifier from per-net to global so no
event is missed.

Fixes: 02a68a47 ("net: devlink: track netdev with devlink_port assigned")
Signed-off-by: default avatarJiri Pirko <jiri@nvidia.com>
Reviewed-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230206094151.2557264-1-jiri@resnulli.usSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      565b4824
    • Vladimir Oltean's avatar
      selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more comprehensive · bbb253b2
      Vladimir Oltean authored 
      We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with
"action vlan pop" and the one with "action vlan modify") and one of the
OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority").
But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and
there was an uncaught breakage there.

To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY
filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the
MAC SA of the traffic sent by mausezahn, $h1_mac.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      bbb253b2
    • Vladimir Oltean's avatar
      net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q" · f964f839
      Vladimir Oltean authored 
      Alternative short title: don't instruct the hardware to match on
EtherType with "protocol 802.1Q" flower filters. It doesn't work for the
reasons detailed below.

With a command such as the following:

tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
	protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
	action vlan modify id 300 \
	action goto chain $(IS2 0 0)

the created filter is set by ocelot_flower_parse_key() to be of type
OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}.
This gets propagated all the way to is1_entry_set() which commits it to
hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the
case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY,
and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE.

The problem is that for VLAN-tagged frames, the hardware interprets the
ETYPE field as holding the encapsulated VLAN protocol. So the above
filter will only match those packets which have an encapsulated protocol
of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac.

The reason why this is allowed to occur is because, although we have a
block of code in ocelot_flower_parse_key() which sets "match_protocol"
to false when VLAN keys are present, that code executes too late.
There is another block of code, which executes for Ethernet addresses,
and has a "goto finished_key_parsing" and skips the VLAN header parsing.
By skipping it, "match_protocol" remains with the value it was
initialized with, i.e. "true", and "proto" is set to f->common.protocol,
or 0x8100.

The concept of ignoring some keys rather than erroring out when they are
present but can't be offloaded is dubious in itself, but is present
since the initial commit fe3490e6 ("net: mscc: ocelot: Hardware
ofload for tc flower filter"), and it's outside of the scope of this
patch to change that.

The problem was introduced when the driver started to interpret the
flower filter's protocol, and populate the VCAP filter's ETYPE field
based on it.

To fix this, it is sufficient to move the code that parses the VLAN keys
earlier than the "goto finished_key_parsing" instruction. This will
ensure that if we have a flower filter with both VLAN and Ethernet
address keys, it won't match on ETYPE 0x8100, because the VLAN key
parsing sets "match_protocol = false".

Fixes: 86b956de ("net: mscc: ocelot: support matching on EtherType")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      f964f839
    • Vladimir Oltean's avatar
      net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-aware · 0b6d6425
      Vladimir Oltean authored 
      Frank reports that in a mt7530 setup where some ports are standalone and
some are in a VLAN-aware bridge, 8021q uppers of the standalone ports
lose their VLAN tag on xmit, as seen by the link partner.

This seems to occur because once the other ports join the VLAN-aware
bridge, mt7530_port_vlan_filtering() also calls
mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way
that the switch processes the traffic of the standalone port.

Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it:

EG_TAG: Incoming Port Egress Tag VLAN Attribution
0: disabled (system default)
1: consistent (keep the original ingress tag attribute)

My interpretation is that this setting applies on the ingress port, and
"disabled" is basically the normal behavior, where the egress tag format
of the packet (tagged or untagged) is decided by the VLAN table
(MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG).

But there is also an option of overriding the system default behavior,
and for the egress tagging format of packets to be decided not by the
VLAN table, but simply by copying the ingress tag format (if ingress was
tagged, egress is tagged; if ingress was untagged, egress is untagged;
aka "consistent). This is useful in 2 scenarios:

- VLAN-unaware bridge ports will always encounter a miss in the VLAN
  table. They should forward a packet as-is, though. So we use
  "consistent" there. See commit e045124e ("net: dsa: mt7530: fix
  tagged frames pass-through in VLAN-unaware mode").

- Traffic injected from the CPU port. The operating system is in god
  mode; if it wants a packet to exit as VLAN-tagged, it sends it as
  VLAN-tagged. Otherwise it sends it as VLAN-untagged*.

*This is true only if we don't consider the bridge TX forwarding offload
feature, which mt7530 doesn't support.

So for now, make the CPU port always stay in "consistent" mode to allow
software VLANs to be forwarded to their egress ports with the VLAN tag
intact, and not stripped.

Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/
Fixes: e045124e ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode")
Reported-by: default avatarFrank Wunderlich <frank-w@public-files.de>
Tested-by: default avatarFrank Wunderlich <frank-w@public-files.de>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: default avatarArınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      0b6d6425
  5. 06 Feb, 2023 9 commits
    • Zhang Changzhong's avatar
      ice: switch: fix potential memleak in ice_add_adv_recipe() · 4a606ce6
      Zhang Changzhong authored 
      When ice_add_special_words() fails, the 'rm' is not released, which will
lead to a memory leak. Fix this up by going to 'err_unroll' label.

Compile tested only.

Fixes: 8b032a55 ("ice: low level support for tunnels")
Signed-off-by: default avatarZhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: default avatarSujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
      4a606ce6
    • Dan Carpenter's avatar
      ice: Fix off by one in ice_tc_forward_to_queue() · 3f4870df
      Dan Carpenter authored 
      The > comparison should be >= to prevent reading one element beyond
the end of the array.

The "vsi->num_rxq" is not strictly speaking the number of elements in
the vsi->rxq_map[] array.  The array has "vsi->alloc_rxq" elements and
"vsi->num_rxq" is less than or equal to the number of elements in the
array.  The array is allocated in ice_vsi_alloc_arrays().  It's still
an off by one but it might not access outside the end of the array.

Fixes: 143b86f3 ("ice: Enable RX queue selection using skbedit action")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Acked-by: default avatarAmritha Nambiar <amritha.nambiar@intel.com>
Tested-by: default avatarBharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
      3f4870df
    • Brett Creeley's avatar
      ice: Fix disabling Rx VLAN filtering with port VLAN enabled · c793f8ea
      Brett Creeley authored 
      If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN
filtering will be disabled if the VF requests to enable promiscuous
mode. When the VF is in a port VLAN, this is the incorrect behavior
because it will allow the VF to receive traffic outside of its port VLAN
domain. Fortunately this only resulted in the VF(s) receiving broadcast
traffic outside of the VLAN domain because all of the VLAN promiscuous
rules are based on the port VLAN ID. Fix this by setting the
.disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on
the VF.

Also, make sure to make this fix for both Single VLAN Mode and Double
VLAN Mode enabled devices.

Fixes: c31af68a ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Signed-off-by: default avatarBrett Creeley <brett.creeley@intel.com>
Signed-off-by: default avatarKaren Ostrowska <karen.ostrowska@intel.com>
Tested-by: default avatarMarek Szlosek <marek.szlosek@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      c793f8ea
    • Michal Swiatkowski's avatar
      ice: fix out-of-bounds KASAN warning in virtchnl · b2dbde3a
      Michal Swiatkowski authored 
      KASAN reported:
[ 9793.708867] BUG: KASAN: global-out-of-bounds in ice_get_link_speed+0x16/0x30 [ice]
[ 9793.709205] Read of size 4 at addr ffffffffc1271b1c by task kworker/6:1/402

[ 9793.709222] CPU: 6 PID: 402 Comm: kworker/6:1 Kdump: loaded Tainted: G    B      OE      6.1.0+ #3
[ 9793.709235] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[ 9793.709245] Workqueue: ice ice_service_task [ice]
[ 9793.709575] Call Trace:
[ 9793.709582]  <TASK>
[ 9793.709588]  dump_stack_lvl+0x44/0x5c
[ 9793.709613]  print_report+0x17f/0x47b
[ 9793.709632]  ? __cpuidle_text_end+0x5/0x5
[ 9793.709653]  ? ice_get_link_speed+0x16/0x30 [ice]
[ 9793.709986]  ? ice_get_link_speed+0x16/0x30 [ice]
[ 9793.710317]  kasan_report+0xb7/0x140
[ 9793.710335]  ? ice_get_link_speed+0x16/0x30 [ice]
[ 9793.710673]  ice_get_link_speed+0x16/0x30 [ice]
[ 9793.711006]  ice_vc_notify_vf_link_state+0x14c/0x160 [ice]
[ 9793.711351]  ? ice_vc_repr_cfg_promiscuous_mode+0x120/0x120 [ice]
[ 9793.711698]  ice_vc_process_vf_msg+0x7a7/0xc00 [ice]
[ 9793.712074]  __ice_clean_ctrlq+0x98f/0xd20 [ice]
[ 9793.712534]  ? ice_bridge_setlink+0x410/0x410 [ice]
[ 9793.712979]  ? __request_module+0x320/0x520
[ 9793.713014]  ? ice_process_vflr_event+0x27/0x130 [ice]
[ 9793.713489]  ice_service_task+0x11cf/0x1950 [ice]
[ 9793.713948]  ? io_schedule_timeout+0xb0/0xb0
[ 9793.713972]  process_one_work+0x3d0/0x6a0
[ 9793.714003]  worker_thread+0x8a/0x610
[ 9793.714031]  ? process_one_work+0x6a0/0x6a0
[ 9793.714049]  kthread+0x164/0x1a0
[ 9793.714071]  ? kthread_complete_and_exit+0x20/0x20
[ 9793.714100]  ret_from_fork+0x1f/0x30
[ 9793.714137]  </TASK>

[ 9793.714151] The buggy address belongs to the variable:
[ 9793.714158]  ice_aq_to_link_speed+0x3c/0xffffffffffff3520 [ice]

[ 9793.714632] Memory state around the buggy address:
[ 9793.714642]  ffffffffc1271a00: f9 f9 f9 f9 00 00 05 f9 f9 f9 f9 f9 00 00 02 f9
[ 9793.714656]  ffffffffc1271a80: f9 f9 f9 f9 00 00 04 f9 f9 f9 f9 f9 00 00 00 00
[ 9793.714670] >ffffffffc1271b00: 00 00 00 04 f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9
[ 9793.714680]                             ^
[ 9793.714690]  ffffffffc1271b80: 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 00 00 00 00
[ 9793.714704]  ffffffffc1271c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

The ICE_AQ_LINK_SPEED_UNKNOWN define is BIT(15). The value is bigger
than both legacy and normal link speed tables. Add one element (0 -
unknown) to both tables. There is no need to explicitly set table size,
leave it empty.

Fixes: 1d0e28a9 ("ice: Remove and replace ice speed defines with ethtool.h versions")
Signed-off-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: default avatarAlexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
      b2dbde3a
    • Anirudh Venkataramanan's avatar
      ice: Do not use WQ_MEM_RECLAIM flag for workqueue · 4d159f78
      Anirudh Venkataramanan authored 
      When both ice and the irdma driver are loaded, a warning in
check_flush_dependency is being triggered. This is due to ice driver
workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one
is not.

According to kernel documentation, this flag should be set if the
workqueue will be involved in the kernel's memory reclamation flow.
Since it is not, there is no need for the ice driver's WQ to have this
flag set so remove it.

Example trace:

[  +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0
[  +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0
[  +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha
in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel
_rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1
0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_
core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs
ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter
acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba
ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[  +0.000161]  [last unloaded: bonding]
[  +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S                 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1
[  +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[  +0.000003] Workqueue: ice ice_service_task [ice]
[  +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0
[  +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08
9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06
[  +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282
[  +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000
[  +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80
[  +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112
[  +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000
[  +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400
[  +0.000004] FS:  0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000
[  +0.000003] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0
[  +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  +0.000002] PKRU: 55555554
[  +0.000003] Call Trace:
[  +0.000002]  <TASK>
[  +0.000003]  __flush_workqueue+0x203/0x840
[  +0.000006]  ? mutex_unlock+0x84/0xd0
[  +0.000008]  ? __pfx_mutex_unlock+0x10/0x10
[  +0.000004]  ? __pfx___flush_workqueue+0x10/0x10
[  +0.000006]  ? mutex_lock+0xa3/0xf0
[  +0.000005]  ib_cache_cleanup_one+0x39/0x190 [ib_core]
[  +0.000174]  __ib_unregister_device+0x84/0xf0 [ib_core]
[  +0.000094]  ib_unregister_device+0x25/0x30 [ib_core]
[  +0.000093]  irdma_ib_unregister_device+0x97/0xc0 [irdma]
[  +0.000064]  ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma]
[  +0.000059]  ? up_write+0x5c/0x90
[  +0.000005]  irdma_remove+0x36/0x90 [irdma]
[  +0.000062]  auxiliary_bus_remove+0x32/0x50
[  +0.000007]  device_release_driver_internal+0xfa/0x1c0
[  +0.000005]  bus_remove_device+0x18a/0x260
[  +0.000007]  device_del+0x2e5/0x650
[  +0.000005]  ? __pfx_device_del+0x10/0x10
[  +0.000003]  ? mutex_unlock+0x84/0xd0
[  +0.000004]  ? __pfx_mutex_unlock+0x10/0x10
[  +0.000004]  ? _raw_spin_unlock+0x18/0x40
[  +0.000005]  ice_unplug_aux_dev+0x52/0x70 [ice]
[  +0.000160]  ice_service_task+0x1309/0x14f0 [ice]
[  +0.000134]  ? __pfx___schedule+0x10/0x10
[  +0.000006]  process_one_work+0x3b1/0x6c0
[  +0.000008]  worker_thread+0x69/0x670
[  +0.000005]  ? __kthread_parkme+0xec/0x110
[  +0.000007]  ? __pfx_worker_thread+0x10/0x10
[  +0.000005]  kthread+0x17f/0x1b0
[  +0.000005]  ? __pfx_kthread+0x10/0x10
[  +0.000004]  ret_from_fork+0x29/0x50
[  +0.000009]  </TASK>

Fixes: 940b61af ("ice: Initialize PF and setup miscellaneous interrupt")
Signed-off-by: default avatarAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: default avatarMarcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: default avatarJakub Andrysiak <jakub.andrysiak@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
      4d159f78
    • Alan Stern's avatar
      net: USB: Fix wrong-direction WARNING in plusb.c · 811d5811
      Alan Stern authored 
      The syzbot fuzzer detected a bug in the plusb network driver: A
zero-length control-OUT transfer was treated as a read instead of a
write.  In modern kernels this error provokes a WARNING:

usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0
WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411
usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
Modules linked in:
CPU: 1 PID: 4645 Comm: dhcpcd Not tainted
6.2.0-rc6-syzkaller-00050-g9f266cca #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google
01/12/2023
RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411
...
Call Trace:
 <TASK>
 usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153
 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010
 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068
 pl_vendor_req drivers/net/usb/plusb.c:60 [inline]
 pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline]
 pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85
 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889
 __dev_open+0x297/0x4d0 net/core/dev.c:1417
 __dev_change_flags+0x587/0x750 net/core/dev.c:8530
 dev_change_flags+0x97/0x170 net/core/dev.c:8602
 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147
 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979
 sock_do_ioctl+0xcc/0x230 net/socket.c:1169
 sock_ioctl+0x1f8/0x680 net/socket.c:1286
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and
remove the USB_DIR_IN flag.

Reported-and-tested-by: syzbot+2a0e7abd24f1eb90ce25@syzkaller.appspotmail.com
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Fixes: 090ffa9d ("[PATCH] USB: usbnet (9/9) module for pl2301/2302 cables")
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/00000000000052099f05f3b3e298@google.com/Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      811d5811
    • Casper Andersson's avatar
      net: microchip: sparx5: fix PTP init/deinit not checking all ports · d7d94b26
      Casper Andersson authored 
      Check all ports instead of just port_count ports. PTP init was only
checking ports 0 to port_count. If the hardware ports are not mapped
starting from 0 then they would be missed, e.g. if only ports 20-30 were
mapped it would attempt to init ports 0-10, resulting in NULL pointers
when attempting to timestamp. Now it will init all mapped ports.

Fixes: 70dfe25c ("net: sparx5: Update extraction/injection for timestamping")
Signed-off-by: default avatarCasper Andersson <casper.casan@gmail.com>
Reviewed-by: default avatarHoratiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d7d94b26
    • Herton R. Krzesinski's avatar
      uapi: add missing ip/ipv6 header dependencies for linux/stddef.h · 03702d4d
      Herton R. Krzesinski authored 
      Since commit 58e0be1e ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:

$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
  103 |         __struct_group(/* no tag */, addrs, /* no attrs */,
      |         ^~~~~~~~~~~~~~
...

Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.

Fixes: 58e0be1e ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: default avatarHerton R. Krzesinski <herton@redhat.com>
Reviewed-by: default avatarCarlos O'Donell <carlos@redhat.com>
Tested-by: default avatarCarlos O'Donell <carlos@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      03702d4d
    • Julian Anastasov's avatar
      neigh: make sure used and confirmed times are valid · c1d2ecdf
      Julian Anastasov authored 
      Entries can linger in cache without timer for days, thanks to
the gc_thresh1 limit. As result, without traffic, the confirmed
time can be outdated and to appear to be in the future. Later,
on traffic, NUD_STALE entries can switch to NUD_DELAY and start
the timer which can see the invalid confirmed time and wrongly
switch to NUD_REACHABLE state instead of NUD_PROBE. As result,
timer is set many days in the future. This is more visible on
32-bit platforms, with higher HZ value.

Why this is a problem? While we expect unused entries to expire,
such entries stay in REACHABLE state for too long, locked in
cache. They are not expired normally, only when cache is full.

Problem and the wrong state change reported by Zhang Changzhong:

172.16.1.18 dev bond0 lladdr 0a:0e:0f:01:12:01 ref 1 used 350521/15994171/350520 probes 4 REACHABLE

350520 seconds have elapsed since this entry was last updated, but it is
still in the REACHABLE state (base_reachable_time_ms is 30000),
preventing lladdr from being updated through probe.

Fix it by ensuring timer is started with valid used/confirmed
times. Considering the valid time range is LONG_MAX jiffies,
we try not to go too much in the past while we are in
DELAY/PROBE state. There are also places that need
used/updated times to be validated while timer is not running.
Reported-by: default avatarZhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: default avatarJulian Anastasov <ja@ssi.bg>
Tested-by: default avatarZhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c1d2ecdf
  7. 04 Feb, 2023 7 commits
  9. 03 Feb, 2023 1 commit
  11. 02 Feb, 2023 5 commits
    • Linus Torvalds's avatar
      Merge tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · edb9b8f3
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - phy: fix null-deref in phy_attach_direct

   - mac802154: fix possible double free upon parsing error

  Previous releases - regressions:

   - bpf: preserve reg parent/live fields when copying range info,
     prevent mis-verification of programs as safe

   - ip6: fix GRE tunnels not generating IPv6 link local addresses

   - phy: dp83822: fix null-deref on DP83825/DP83826 devices

   - sctp: do not check hb_timer.expires when resetting hb_timer

   - eth: mtk_sock: fix SGMII configuration after phylink conversion

  Previous releases - always broken:

   - eth: xdp: execute xdp_do_flush() before napi_complete_done()

   - skb: do not mix page pool and page referenced frags in GRO

   - bpf:
      - fix a possible task gone issue with bpf_send_signal[_thread]()
      - fix an off-by-one bug in bpf_mem_cache_idx() to select the right
        cache
      - add missing btf_put to register_btf_id_dtor_kfuncs
      - sockmap: fon't let sock_map_{close,destroy,unhash} call itself

   - gso: fix null-deref in skb_segment_list()

   - mctp: purge receive queues on sk destruction

   - fix UaF caused by accept on already connected socket in exotic
     socket families

   - tls: don't treat list head as an entry in tls_is_tx_ready()

   - netfilter: br_netfilter: disable sabotage_in hook after first
     suppression

   - wwan: t7xx: fix runtime PM implementation

  Misc:

   - MAINTAINERS: spring cleanup of networking maintainers"

* tag 'net-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
  mtk_sgmii: enable PCS polling to allow SFP work
  net: mediatek: sgmii: fix duplex configuration
  net: mediatek: sgmii: ensure the SGMII PHY is powered down on configuration
  MAINTAINERS: update SCTP maintainers
  MAINTAINERS: ipv6: retire Hideaki Yoshifuji
  mailmap: add John Crispin's entry
  MAINTAINERS: bonding: move Veaceslav Falico to CREDITS
  net: openvswitch: fix flow memory leak in ovs_flow_cmd_new
  net: ethernet: mtk_eth_soc: disable hardware DSA untagging for second MAC
  virtio-net: Keep stop() to follow mirror sequence of open()
  selftests: net: udpgso_bench_tx: Cater for pending datagrams zerocopy benchmarking
  selftests: net: udpgso_bench: Fix racing bug between the rx/tx programs
  selftests: net: udpgso_bench_rx/tx: Stop when wrong CLI args are provided
  selftests: net: udpgso_bench_rx: Fix 'used uninitialized' compiler warning
  can: mcp251xfd: mcp251xfd_ring_set_ringparam(): assign missing tx_obj_num_coalesce_irq
  can: isotp: split tx timer into transmission and timeout
  can: isotp: handle wait_event_interruptible() return values
  can: raw: fix CAN FD frame transmissions over CAN XL devices
  can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate
  hv_netvsc: Fix missed pagebuf entries in netvsc_dma_map/unmap()
  ...
      edb9b8f3
    • Linus Torvalds's avatar
      Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of... · e7368fd3
      Linus Torvalds authored 
      Merge tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "Three fixes to bugs that cause kernel crash, link error during build,
  and a third to fix kunit_test_init_section_suites() extra indirection
  issue"

* tag 'linux-kselftest-kunit-fixes-6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: fix kunit_test_init_section_suites(...)
  kunit: fix bug in KUNIT_EXPECT_MEMEQ
  kunit: Export kunit_running()
      e7368fd3
    • Linus Torvalds's avatar
      Merge tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc · 42c78a5b
      Linus Torvalds authored 
      Pull ARM SoC fixes from Arnd Bergmann:
 "The majority of bugfixes is once more for the NXP i.MX platform,
  addressing issue with i.MX8M (UART, watchdog and ethernet) as well as
  imx8dxl power button and the USB modem on an imx7 board.

  The reason that i.MX always shows up here is obviously not that they
  are more buggy than the others, but they have the most boards and are
  good about getting fixes in quickly.

  The other DT fixes are for the Nuvoton wpcm450 flash controller and
  the i2c mux on an ASpeed board.

  Lastly, there are updates to the MAINTAINERS entries for Mediatek,
  AMD/Seattle and NXP SoCs, as well as a lone code fix for error
  handling in the allwinner 'rsb' bus driver"

* tag 'soc-fixes-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: wpcm450: Add nuvoton,shm = <&shm> to FIU node
  MAINTAINERS: Update entry for MediaTek SoC support
  MAINTAINERS: amd: drop inactive Brijesh Singh
  ARM: dts: imx7d-smegw01: Fix USB host over-current polarity
  arm64: dts: imx8mm-verdin: Do not power down eth-phy
  MAINTAINERS: match freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX
  ARM: dts: aspeed: Fix pca9849 compatible
  arm64: dts: freescale: imx8dxl: fix sc_pwrkey's property name linux,keycode
  arm64: dts: imx8m-venice: Remove incorrect 'uart-has-rtscts'
  arm64: dts: imx8mm: Reinstate GPIO watchdog always-running property on eDM SBC
  bus: sunxi-rsb: Fix error handling in sunxi_rsb_init()
      42c78a5b
    • Linus Torvalds's avatar
      Merge tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · addfba11
      Linus Torvalds authored 
      Pull s390 fixes from Heiko Carstens:

 - With CONFIG_VMAP_STACK enabled it is not possible to load the s390
   specific diag288_wdt watchdog module. The reason is that a pointer to
   a string is passed to an inline assembly; this string however is
   located on the stack, while the instruction within the inline
   assembly expects a physicial address. Fix this by copying the string
   to a kmalloc'ed buffer.

 - The diag288_wdt watchdog module does not indicate that it accesses
   memory from an inline assembly, which it does. Add "memory" to the
   clobber list to prevent the compiler from optimizing code incorrectly
   away.

 - Pass size of the uncompressed kernel image to __decompress() call.
   Otherwise the kernel image decompressor may corrupt/overwrite an
   initrd. This was reported to happen on s390 after commit 2aa14b1a
   ("zstd: import usptream v1.5.2").

* tag 's390-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/decompressor: specify __decompress() buf len to avoid overflow
  watchdog: diag288_wdt: fix __diag288() inline assembly
  watchdog: diag288_wdt: do not use stack buffers for hardware data
      addfba11
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v6.2-4' of... · 870bb765
      Linus Torvalds authored 
      Merge tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A set of AMD PMF fixes + a few other small fixes"

* tag 'platform-drivers-x86-v6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: touchscreen_dmi: Add Chuwi Vi8 (CWI501) DMI match
  platform/x86: thinkpad_acpi: Fix thinklight LED brightness returning 255
  platform/x86/amd: pmc: add CONFIG_SERIO dependency
  platform/x86/amd/pmf: Ensure mutexes are initialized before use
  platform/x86/amd/pmf: Fix to update SPS thermals when power supply change
  platform/x86/amd/pmf: Fix to update SPS default pprof thermals
  platform/x86/amd/pmf: update to auto-mode limits only after AMT event
  platform/x86/amd/pmf: Add helper routine to check pprof is balanced
  platform/x86/amd/pmf: Add helper routine to update SPS thermals
      870bb765
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7