- 27 Nov, 2018 26 commits
-
-
Geert Uytterhoeven authored
[ Upstream commit e3e61f01 ] If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Julian Wiedmann authored
[ Upstream commit bd74a7f9 ] Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29c ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 54451f60 ] When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469 ("netfilter: xtables: idletimer target implementation") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jozsef Kadlecsik authored
[ Upstream commit 17b8b74c ] The function is called when rcu_read_lock() is held and not when rcu_read_lock_bh() is held. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Justin M. Forbes authored
[ Upstream commit a541f0eb ] Fixes: ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1275: modules] Error 2 + exit 1 Signed-off-by:
Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Eric Westbrook authored
[ Upstream commit 886503f3 ] Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9cSigned-off-by:
Eric Westbrook <linux@westbrook.io> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 439cd39e ] Commit 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") postponed decreasing set reference counters to the RCU callback. An 'ipset del' command can terminate before the RCU grace period is elapsed, and if sets are listed before then, the reference counter shown in userspace will be wrong: # ipset create h hash:ip; ipset create l list:set; ipset add l # ipset del l h; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 1 Number of entries: 0 Members: # sleep 1; ipset list h Name: h Type: hash:ip Revision: 4 Header: family inet hashsize 1024 maxelem 65536 Size in memory: 88 References: 0 Number of entries: 0 Members: Fix this by making the reference count update synchronous again. As a result, when sets are listed, ip_set_name_byindex() might now fetch a set whose reference count is already zero. Instead of relying on the reference count to protect against concurrent set renaming, grab ip_set_ref_lock as reader and copy the name, while holding the same lock in ip_set_rename() as writer instead. Reported-by:
Li Shuang <shuali@redhat.com> Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Vasily Gorbik authored
[ Upstream commit b44b136a ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit b5bb4258 ] Clang warns that if the default case is taken, ret will be uninitialized. ./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ ./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs here return ret; ^~~ ./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable 'ret' to silence this warning unsigned long ret, loop; ^ = 0 This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Paul Gortmaker authored
[ Upstream commit 684238d7 ] To fix: acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting! As can be seen in the context, the BIOS registers haven't changed in the previous versions, so the assumption is they won't have changed in this last update for this somewhat older platform either. Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Peter Feuerer <peter@piie.net> Signed-off-by:
-
Feng Tang authored
[ Upstream commit d2266bbf ] The "pciserial" earlyprintk variant helps much on many modern x86 platforms, but unfortunately there are still some platforms with PCI UART devices which have the wrong PCI class code. In that case, the current class code check does not allow for them to be used for logging. Add a sub-option "force" which overrides the class code check and thus the use of such device can be enforced. [ bp: massage formulations. ] Suggested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Stuart R . Anderson" <stuart.r.anderson@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thymo van Beers <thymovanbeers@gmail.com> Cc: alan@linux.intel.com Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20181002164921.25833-1-feng.tang@intel.comSigned-off-by:
-
Zubin Mithra authored
[ Upstream commit 250f2da4 ] Syzkaller reported a OOB-read with the stacktrace below. This occurs inside __aa_lookupn_ns as `n` is not initialized. `n` is obtained from aa_splitn_fqname. In cases where `name` is invalid, aa_splitn_fqname returns without initializing `ns_name` and `ns_len`. Fix this by always initializing `ns_name` and `ns_len`. __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b4 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 memcmp+0xe3/0x160 lib/string.c:861 strnstr+0x4b/0x70 lib/string.c:934 __aa_lookupn_ns+0xc1/0x570 security/apparmor/policy_ns.c:209 aa_lookupn_ns+0x88/0x1e0 security/apparmor/policy_ns.c:240 aa_fqlookupn_profile+0x1b9/0x1010 security/apparmor/policy.c:468 fqlookupn_profile+0x80/0xc0 security/apparmor/label.c:1844 aa_label_strn_parse+0xa3a/0x1230 security/apparmor/label.c:1908 aa_label_parse+0x42/0x50 security/apparmor/label.c:1943 aa_change_profile+0x513/0x3510 security/apparmor/domain.c:1362 apparmor_setprocattr+0xaa4/0x1150 security/apparmor/lsm.c:658 security_setprocattr+0x66/0xc0 security/security.c:1298 proc_pid_attr_write+0x301/0x540 fs/proc/base.c:2555 __vfs_write+0x119/0x9f0 fs/read_write.c:485 vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3b0aaf58 ("apparmor: add lib fn to find the "split" for fqnames") Reported-by: syzbot+61e4b490d9d2da591b50@syzkaller.appspotmail.com Signed-off-by:
Zubin Mithra <zsm@chromium.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit b3322802 ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by:
-
Chengguang Xu authored
[ Upstream commit 515f1867 ] There are some cases can cause memory leak when parsing option 'osdname'. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David Miller authored
[ Upstream commit d6afa561 ] Using the sh_entsize for both values isn't correct. It happens to be correct on x86... For both 32-bit and 64-bit sparc, there are four PLT entries in the PLT section. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Alan Tull authored
[ Upstream commit 52091c25 ] When the fixed rate clock is created by devicetree, of_clk_add_provider is called. Add a call to of_clk_del_provider in the remove function to balance it out. Signed-off-by:
Alan Tull <atull@kernel.org> Fixes: 435779fe ("clk: fixed-rate: Convert into a module platform driver") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Rajneesh Bhardwaj authored
[ Upstream commit 8d98b1ef ] On some Goldmont based systems such as ASRock J3455M the BIOS may not enable the IPC1 device that provides access to the PMC and PUNIT. In such scenarios, the IOSS and PSS resources from the platform device can not be obtained and result in a invalid telemetry_plt_config which is an internal data structure that holds platform config and is maintained by the telemetry platform driver. This is also applicable to the platforms where the BIOS supports IPC1 device under debug configurations but IPC1 is disabled by user or the policy. This change allows user to know the reason for not seeing entries under /sys/kernel/debug/telemetry/* when there is no apparent failure at boot. Cc: Matt Turner <matt.turner@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779Acked-by:
Matt Turner <matt.turner@intel.com> Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by:
-
Lee, Shawn C authored
[ Upstream commit 922dceff ] BOE panel (ID: 0x0771) that reports "DFP 1.x compliant TMDS". But it's 6bpc panel only instead of 8 bpc. Add panel ID to edid quirk list and set 6 bpc as default to work around this issue. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Cooper Chiou <cooper.chiou@intel.com> Signed-off-by:
Lee, Shawn C <shawn.c.lee@intel.com>> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1540792173-7288-1-git-send-email-shawn.c.lee@intel.comSigned-off-by:
-
Richard Weinberger authored
[ Upstream commit 7ff1e34b ] Fixes: arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of non-void function [-Wreturn-type] longjmp() never returns but gcc still warns that the end of the function can be reached. Add a return code and debug aid to detect this impossible case. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit 0a3021d4 ] Creating, renaming or deleting a file may cause catalog corruption and data loss. This bug is randomly triggered by xfstests generic/027, but here is a faster reproducer: truncate -s 50M fs.iso mkfs.hfsplus fs.iso mount fs.iso /mnt i=100 while [ $i -le 150 ]; do touch /mnt/$i &>/dev/null ((++i)) done i=100 while [ $i -le 150 ]; do mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null ((++i)) done umount /mnt fsck.hfsplus -n fs.iso The bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ernesto A. Fernández authored
[ Upstream commit d057c036 ] This bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. It is not possible for this to happen on a valid hfs filesystem because the index nodes have fixed length keys. For reasons I ignore, the hfs module does have support for a number of hfsplus features. A corrupt btree header may report variable length keys and trigger this bug, so it's better to fix it. Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Jann Horn authored
[ Upstream commit b10298d5 ] fill_with_dentries() failed to propagate errors up to reiserfs_for_each_xattr() properly. Plumb them through. Note that reiserfs_for_each_xattr() is only used by reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of reiserfs_delete_xattrs() is discarded anyway, the only difference there is whether a warning is printed to dmesg. The result of reiserfs_chown_xattrs() does matter because it can block chowning of the file to which the xattrs belong; but either way, the resulting state can have misaligned ownership, so my patch doesn't improve things greatly. Credit for making me look at this code goes to Al Viro, who pointed out that the ->actor calling convention is suboptimal and should be changed. Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.comSigned-off-by:
Jann Horn <jannh@google.com> Reviewed-by:
-
Radoslaw Tyl authored
[ Upstream commit 6702185c ] This change resolves a driver bug where the driver is logging a message that says "Spoofed packets detected". This can occur on the PF (host) when a VF has VLAN+MACVLAN enabled and is re-started with a different MAC address. MAC and VLAN anti-spoofing filters are to be enabled together. Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Acked-by:
Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit 96686689 ] Commit 1404d6f1 ("arm64: dump: Add checking for writable and exectuable pages") has successfully identified code that leaves a page with W+X permissions. [ 3.245140] arm64/mm: Found insecure W+X mapping at address (____ptrval____)/0xffff000000d90000 [ 3.245771] WARNING: CPU: 0 PID: 1 at ../arch/arm64/mm/dump.c:232 note_page+0x410/0x420 [ 3.246141] Modules linked in: [ 3.246653] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5-next-20180928-00001-ge70ae259b853-dirty #62 [ 3.247008] Hardware name: linux,dummy-virt (DT) [ 3.247347] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 3.247623] pc : note_page+0x410/0x420 [ 3.247898] lr : note_page+0x410/0x420 [ 3.248071] sp : ffff00000804bcd0 [ 3.248254] x29: ffff00000804bcd0 x28: ffff000009274000 [ 3.248578] x27: ffff00000921a000 x26: ffff80007dfff000 [ 3.248845] x25: ffff0000093f5000 x24: ffff000009526f6a [ 3.249109] x23: 0000000000000004 x22: ffff000000d91000 [ 3.249396] x21: ffff000000d90000 x20: 0000000000000000 [ 3.249661] x19: ffff00000804bde8 x18: 0000000000000400 [ 3.249924] x17: 0000000000000000 x16: 0000000000000000 [ 3.250271] x15: ffffffffffffffff x14: 295f5f5f5f6c6176 [ 3.250594] x13: 7274705f5f5f5f28 x12: 2073736572646461 [ 3.250941] x11: 20746120676e6970 x10: 70616d20582b5720 [ 3.251252] x9 : 6572756365736e69 x8 : 3039643030303030 [ 3.251519] x7 : 306666666678302f x6 : ffff0000095467b2 [ 3.251802] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.252060] x3 : 0000000000000000 x2 : ffffffffffffffff [ 3.252323] x1 : 4d151327adc50b00 x0 : 0000000000000000 [ 3.252664] Call trace: [ 3.252953] note_page+0x410/0x420 [ 3.253186] walk_pgd+0x12c/0x238 [ 3.253417] ptdump_check_wx+0x68/0xf8 [ 3.253637] mark_rodata_ro+0x68/0x98 [ 3.253847] kernel_init+0x38/0x160 [ 3.254103] ret_from_fork+0x10/0x18 kprobes allocates a writable executable page with module_alloc() in order to store executable code. Reworked to that when allocate a page it sets mode RO. Inspired by commit 63fef14f ("kprobes/x86: Make insn buffer always ROX and use text_poke()"). Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> [catalin.marinas@arm.com: removed unnecessary casts] Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Ronnie Sahlberg authored
[ Upstream commit 0c5d6cb6 ] If the application buffer was too small to fit all the names we would still count the number of bytes and return this for listxattr. This would then trigger a BUG in usercopy.c Fix the computation of the size so that we return -ERANGE correctly when the buffer is too small. This fixes the kernel BUG for xfstest generic/377 Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 8c6c9bed ] There is a null check on dst_file->private data which suggests it can be potentially null. However, before this check, pointer smb_file_target is derived from dst_file->private and dereferenced in the call to tlink_tcon, hence there is a potential null pointer deference. Fix this by assigning smb_file_target and target_tcon after the null pointer sanity checks. Detected by CoverityScan, CID#1475302 ("Dereference before null check") Fixes: 04b38d60 ("vfs: pull btrfs clone API to vfs layer") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 23 Nov, 2018 14 commits
-
-
Greg Kroah-Hartman authored
-
Chris Paterson authored
commit 1dfc65ce upstream. The R-Car M2N hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: 57f9156b ("ARM: dts: r8a7793: enable to use thermal-zone") Signed-off-by:
Chris Paterson <chris.paterson2@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Paterson authored
commit e4fdf59b upstream. The R-Car M2W hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: cac68a56 ("ARM: dts: r8a7791: enable to use thermal-zone") Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 8a13906a which is commit 53c613fe upstream. It's not ready for the stable trees as there are major slowdowns involved with this patch. Reported-by:
Jiri Kosina <jkosina@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "WoodhouseDavid" <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: "SchauflerCasey" <casey.schaufler@intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0d5b9311 ] Multiple cpus might attempt to insert a new fragment in rhashtable, if for example RPS is buggy, as reported by 배석진 in https://patchwork.ozlabs.org/patch/994601/ We use rhashtable_lookup_get_insert_key() instead of rhashtable_insert_fast() to let cpus losing the race free their own inet_frag_queue and use the one that was inserted by another cpu. Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
배석진 <soukjin.bae@samsung.com> Signed-off-by:
-
Frieder Schrempf authored
[ Upstream commit 7b900ead ] We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d1694 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by:
Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 85b18b02 ] The commit f77f0aee ("net: use core MTU range checking in USB NIC drivers") introduce a common MTU handling for usbnet. But it's missing the necessary changes for smsc95xx. So set the MTU range accordingly. This patch has been tested on a Raspberry Pi 3. Fixes: f77f0aee ("net: use core MTU range checking in USB NIC drivers") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Shalom Toledo authored
[ Upstream commit 96801552 ] The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by:
Shalom Toledo <shalomt@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit e1e46479 ] Different from processing the addstrm_out request, The receiver handles an addstrm_in request by sending back an addstrm_out request to the sender who will increase its stream's in and incnt later. Now stream->incnt has been increased since it sent out the addstrm_in request in sctp_send_add_streams(), with the wrong stream->incnt will even cause crash when copying stream info from the old stream's in to the new one's in sctp_process_strreset_addstrm_out(). This patch is to fix it by simply removing the stream->incnt change from sctp_send_add_streams(). Fixes: 242bd2d5 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Martin Schiller authored
[ Upstream commit df5a8ec6 ] Up until commit 7e5fbd1e ("net: mdio-gpio: Convert to use gpiod functions where possible"), the _cansleep variants of the gpio_ API was used. After that commit and the change to gpiod_ API, the _cansleep() was dropped. This then results in WARN_ON() when used with GPIO devices which do sleep. Add back the _cansleep() to avoid this. Fixes: 7e5fbd1e ("net: mdio-gpio: Convert to use gpiod functions where possible") Signed-off-by:
Martin Schiller <ms@dev.tdt.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit fd82d61b ] As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153f ("sctp: add support for generating add stream change event notification") Reported-by:
-
Tristram Ha authored
[ Upstream commit 284fb78e ] Initialize mutex before use. Avoid kernel complaint when CONFIG_DEBUG_LOCK_ALLOC is enabled. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by:
Pavel Machek <pavel@ucw.cz> Reviewed-by:
-
Subash Abhinov Kasiviswanathan authored
[ Upstream commit d02854dc ] A null dereference was observed when a sysctl was being set from userspace and rmnet was stuck trying to complete some actions in the NETDEV_REGISTER callback. This is because the real_dev is set only after the device registration handler completes. sysctl call stack - <6> Unable to handle kernel NULL pointer dereference at virtual address 00000108 <2> pc : rmnet_vnd_get_iflink+0x1c/0x28 <2> lr : dev_get_iflink+0x2c/0x40 <2> rmnet_vnd_get_iflink+0x1c/0x28 <2> inet6_fill_ifinfo+0x15c/0x234 <2> inet6_ifinfo_notify+0x68/0xd4 <2> ndisc_ifinfo_sysctl_change+0x1b8/0x234 <2> proc_sys_call_handler+0xac/0x100 <2> proc_sys_write+0x3c/0x4c <2> __vfs_write+0x54/0x14c <2> vfs_write+0xcc/0x188 <2> SyS_write+0x60/0xc0 <2> el0_svc_naked+0x34/0x38 device register call stack - <2> notifier_call_chain+0x84/0xbc <2> raw_notifier_call_chain+0x38/0x48 <2> call_netdevice_notifiers_info+0x40/0x70 <2> call_netdevice_notifiers+0x38/0x60 <2> register_netdevice+0x29c/0x3d8 <2> rmnet_vnd_newlink+0x68/0xe8 <2> rmnet_newlink+0xa0/0x160 <2> rtnl_newlink+0x57c/0x6c8 <2> rtnetlink_rcv_msg+0x1dc/0x328 <2> netlink_rcv_skb+0xac/0x118 <2> rtnetlink_rcv+0x24/0x30 <2> netlink_unicast+0x158/0x1f0 <2> netlink_sendmsg+0x32c/0x338 <2> sock_sendmsg+0x44/0x60 <2> SyS_sendto+0x150/0x1ac <2> el0_svc_naked+0x34/0x38 Fixes: b752eff5 ("net: qualcomm: rmnet: Implement ndo_get_iflink") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 7cb6a2a2 ] A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0f ("net: systemport: add suspend and resume support") Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by:
-
