- 11 Nov, 2011 17 commits
-
-
Alan Stern authored
commit 68aa95d5 upstream. This patch (as1489) works around a hardware bug in MosChip EHCI controllers. Evidently when one of these controllers increments the frame-index register, it changes the three low-order bits (the microframe counter) before changing the higher order bits (the frame counter). If the register is read at just the wrong time, the value obtained is too low by 8. When the appropriate quirk flag is set, we work around this problem by reading the frame-index register a second time if the first value's three low-order bits are all 0. This gives the hardware a chance to finish updating the register, yielding the correct value. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Jason N Pitt <jpitt@fhcrc.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Harro Haan authored
commit 276532ba upstream. The Kirkwood gave an unaligned memory access error on line 742 of drivers/usb/host/echi-hcd.c: "ehci->last_periodic_enable = ktime_get_real();" Signed-off-by:
Harro Haan <hrhaan@gmail.com> Acked-by:
-
Matthieu CASTET authored
commit 2093c6b4 upstream. This allow to clean duplicated code in most of SOC driver. Signed-off-by:
Matthieu CASTET <castet.matthieu@free.fr> Acked-by:
-
Ning Jiang authored
commit 94abc56f upstream. The following patch removed uart_change_pm() in uart_resume_port(): commit 5933a161 Author: Yin Kangkai <kangkai.yin@linux.intel.com> serial-core: reset the console speed on resume It will break the pxa serial driver when the system resumes from suspend mode as it will try to set baud rate divider register in set_termios but with clock off. The register value can not be set correctly on some platform if the clock is disabled. The pxa driver will check the value and report the following warning: ------------[ cut here ]------------ WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250() Modules linked in: [<c0281f30>] (unwind_backtrace+0x0/0xf0) from [<c029341c>] (warn_slowpath_common+0x4c/0x64) [<c029341c>] (warn_slowpath_common+0x4c/0x64) from [<c029344c>] (warn_slowpath_null+0x18/0x1c) [<c029344c>] (warn_slowpath_null+0x18/0x1c) from [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) from [<c044a840>] (uart_resume_port+0x128/0x2dc) [<c044a840>] (uart_resume_port+0x128/0x2dc) from [<c044bbe0>] (serial_pxa_resume+0x18/0x24) [<c044bbe0>] (serial_pxa_resume+0x18/0x24) from [<c0454d34>] (platform_pm_resume+0x40/0x4c) [<c0454d34>] (platform_pm_resume+0x40/0x4c) from [<c0457ebc>] (pm_op+0x68/0xb4) [<c0457ebc>] (pm_op+0x68/0xb4) from [<c0458368>] (device_resume+0xb0/0xec) [<c0458368>] (device_resume+0xb0/0xec) from [<c04584c8>] (dpm_resume+0xe0/0x194) [<c04584c8>] (dpm_resume+0xe0/0x194) from [<c0458588>] (dpm_resume_end+0xc/0x18) [<c0458588>] (dpm_resume_end+0xc/0x18) from [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) from [<c02c5278>] (enter_state+0xac/0xdc) [<c02c5278>] (enter_state+0xac/0xdc) from [<c02c48ec>] (state_store+0xa0/0xbc) [<c02c48ec>] (state_store+0xa0/0xbc) from [<c0408f7c>] (kobj_attr_store+0x18/0x1c) [<c0408f7c>] (kobj_attr_store+0x18/0x1c) from [<c034a6a4>] (sysfs_write_file+0x108/0x140) [<c034a6a4>] (sysfs_write_file+0x108/0x140) from [<c02fb798>] (vfs_write+0xac/0x134) [<c02fb798>] (vfs_write+0xac/0x134) from [<c02fb8cc>] (sys_write+0x3c/0x68) [<c02fb8cc>] (sys_write+0x3c/0x68) from [<c027c700>] (ret_fast_syscall+0x0/0x2c) ---[ end trace 88289eceb4675b04 ]--- This patch fix the problem by adding the power on opertion back for uart console when console_suspend_enabled is true. Signed-off-by:
Ning Jiang <ning.jiang@marvell.com> Tested-by:
Mayank Rana <mrana@codeaurora.org> Signed-off-by:
-
Marcus Folkesson authored
commit e44aabd6 upstream. Errata E20: UART: Character Timeout interrupt remains set under certain software conditions. Implication: The software servicing the UART can be trapped in an infinite loop. Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by:
-
Rigbert Hamisch authored
commit 1bfac90d upstream. add device ID for "HP un2430 Mobile Broadband Module" Signed-off-by:
Rigbert Hamisch <rigbert@gmx.de> Signed-off-by:
-
Richard Hartmann authored
commit 68c79e57 upstream. Simple patch to make qcserial recognize the USB id of the Sierra Wireless MC8355 which is based on the Gobi 3000 chip. Both UMTS and GPS work fine. Signed-off-by:
Richard Hartmann <richih.mailinglist@gmail.com> Signed-off-by:
-
Mike Sterling authored
commit cf55f4a8 upstream. If a LUN larger than 2 TB is attached to a Linux VM on Hyper-V, we currently report a maximum size of 2 TB. This patch resolves the issue in hv_storvsc. Thanks to Robert Scheck <robert.scheck@etes.de> for reporting the issue. Reported-by:
Robert Scheck <robert.scheck@etes.de> Signed-off-by:
Mike Sterling <mike.sterling@microsoft.com> Signed-off-by:
K.Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Kautuk Consul authored
commit e8df1674 upstream. If the usermode app does an ioctl over this serial device by using TIOCMIWAIT, then the code will wait by setting the current task state to TASK_INTERRUPTIBLE and then calling schedule(). This will be woken up by the qt2_process_modem_status on URB completion when the port_extra->shadowMSR is set to the new modem status. However, this could result in a lost wakeup scenario due to a race in the logic in the qt2_ioctl(TIOCMIWAIT) loop and the URB completion for new modem status in qt2_process_modem_status. Due to this, the usermode app's task will continue to sleep despite a change in the modem status. Signed-off-by:
Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by:
-
Bill Pemberton authored
commit 7cbf3c7c upstream. The serqt_usb2 driver will not work properly with the ssu100 device even though it claims to support it. The ssu100 is supported by the ssu100 driver in mainline so there is no need to have it claimed by serqt_usb2. Signed-off-by:
Bill Pemberton <wfp5p@virginia.edu> Signed-off-by:
-
Jim Wylder authored
commit c5a48592 upstream. A return value of -EINPROGRESS from pm_runtime_get indicates that the device is already resuming due to a previous call. Internally, usb_autopm_get_interface_async doesn't treat this as an error and increments the usage count, but passes the error status along to the caller. The logical assumption of the caller is that any negative return value reflects the device not resuming and the pm_usage_cnt not being incremented. Since the usage count is being incremented and the device is resuming, return success (0) instead. Signed-off-by:
James Wylder <james.wylder@motorola.com> Acked-by:
-
Jiri Slaby authored
commit 1177c0ef upstream. Mistakenly, commit 64ba3dc3 (tty: never hold BTM while getting tty_mutex) switched one fail path in ptmx_open to not free the newly allocated tty. Fix that by jumping to the appropriate place. And rename the labels so that it's clear what is going on there. Introduced-in: v2.6.36-rc2 Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Jiri Slaby authored
commit fa90e1c9 upstream. If tty_add_file fails at the point it is now, we have to revert all the changes we did to the tty. It means either decrease all refcounts if this was a tty reopen or delete the tty if it was newly allocated. There was a try to fix this in v3.0-rc2 using tty_release in 0259894c (TTY: fix fail path in tty_open). But instead it introduced a NULL dereference. It's because tty_release dereferences filp->private_data, but that one is set even in our tty_add_file. And when tty_add_file fails, it's still NULL/garbage. Hence tty_release cannot be called there. To circumvent the original leak (and the current NULL deref) we split tty_add_file into two functions, making the latter non-failing. In that case we may do the former early in open, where handling failures is easy. The latter stays as it is now. So there is no change in functionality. The original bug (leak) was introduced by f573bd17 (tty: Remove __GFP_NOFAIL from tty_add_file()). Thanks Dan for reporting this. Later, we may split tty_release into more functions and call only some of them in this fail path instead. (If at all possible.) Introduced-in: v2.6.37-rc2 Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Jiri Slaby authored
commit c290f835 upstream. When tty_driver_lookup_tty fails in tty_open, we forget to drop a reference to the tty driver. This was added by commit 4a2b5fdd (Move tty lookup/reopen to caller). Fix that by adding tty_driver_kref_put to the fail path. I will refactor the code later. This is for the ease of backporting to stable. Introduced-in: v2.6.28-rc2 Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
WANG Cong authored
commit 2f7861de upstream. This patch fixes the following build error: drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig "if_ser0" is a typo, it should be "if_serial_0". Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 42274bb2 upstream. We should call cifs_all_info_to_fattr in rc == 0 case only. Signed-off-by:
Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 94443f43 upstream. ..the length field has only 17 bits. Acked-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
-
- 25 Oct, 2011 23 commits
-
-
Greg Kroah-Hartman authored
-
Seth Forshee authored
commit f588c960 upstream. Commit 6596528e ("hfsplus: ensure bio requests are not smaller than the hardware sectors") changed the pointers used for volume header allocations but failed to free the correct pointers in the error path path of hfsplus_fill_super() and hfsplus_read_wrapper. The second hunk came from a separate patch by Pavel Ivanov. Reported-by:
Pavel Ivanov <paivanof@gmail.com> Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
Christoph Hellwig <hch@tuxera.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 051a8cb6 upstream. The previous fix for the position-buffer check gives yet another regression on a Dell laptop. The safest fix right now is to add a static quirk for this device (and better to apply it for stable kernels too). Reported-by:
Éric Piel <Eric.Piel@tremplin-utc.net> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Daniel Suchy authored
commit ca201c09 upstream. This is patch for Conexant codec of Intel HDA driver, adding new quirk for Lenovo Thinkpad T520 and W520. Conexant autodetection works fine for T520 (similar subsystem ID is used also in W520 model) and detects more mixer features compared to generic (fallback) Lenovo quirk with hardcoded options in Conexant codec. Patch was activelly tested with Linux 3.0.4, 3.0.6 and 3.0.7 without any problems. Signed-off-by:
Daniel Suchy <danny@danysek.cz> Signed-off-by:
-
Nick Bowler authored
commit 7ed47b7d upstream. The ghash_update function passes a pointer to gf128mul_4k_lle which will be NULL if ghash_setkey is not called or if the most recent call to ghash_setkey failed to allocate memory. This causes an oops. Fix this up by returning an error code in the null case. This is trivially triggered from unprivileged userspace through the AF_ALG interface by simply writing to the socket without setting a key. The ghash_final function has a similar issue, but triggering it requires a memory allocation failure in ghash_setkey _after_ at least one successful call to ghash_update. BUG: unable to handle kernel NULL pointer dereference at 00000670 IP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ghash_generic gf128mul algif_hash af_alg nfs lockd nfs_acl sunrpc bridge ipv6 stp llc Pid: 1502, comm: hashatron Tainted: G W 3.1.0-rc9-00085-ge9308cfd #32 Bochs Bochs EIP: 0060:[<d88c92d4>] EFLAGS: 00000202 CPU: 0 EIP is at gf128mul_4k_lle+0x23/0x60 [gf128mul] EAX: d69db1f0 EBX: d6b8ddac ECX: 00000004 EDX: 00000000 ESI: 00000670 EDI: d6b8ddac EBP: d6b8ddc8 ESP: d6b8dda4 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process hashatron (pid: 1502, ti=d6b8c000 task=d6810000 task.ti=d6b8c000) Stack: 00000000 d69db1f0 00000163 00000000 d6b8ddc8 c101a520 d69db1f0 d52aa000 00000ff0 d6b8dde8 d88d310f d6b8a3f8 d52aa000 00001000 d88d502c d6b8ddfc 00001000 d6b8ddf4 c11676ed d69db1e8 d6b8de24 c11679ad d52aa000 00000000 Call Trace: [<c101a520>] ? kmap_atomic_prot+0x37/0xa6 [<d88d310f>] ghash_update+0x85/0xbe [ghash_generic] [<c11676ed>] crypto_shash_update+0x18/0x1b [<c11679ad>] shash_ahash_update+0x22/0x36 [<c11679cc>] shash_async_update+0xb/0xd [<d88ce0ba>] hash_sendpage+0xba/0xf2 [algif_hash] [<c121b24c>] kernel_sendpage+0x39/0x4e [<d88ce000>] ? 0xd88cdfff [<c121b298>] sock_sendpage+0x37/0x3e [<c121b261>] ? kernel_sendpage+0x4e/0x4e [<c10b4dbc>] pipe_to_sendpage+0x56/0x61 [<c10b4e1f>] splice_from_pipe_feed+0x58/0xcd [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b51f5>] __splice_from_pipe+0x36/0x55 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b6383>] splice_from_pipe+0x51/0x64 [<c10b63c2>] ? default_file_splice_write+0x2c/0x2c [<c10b63d5>] generic_splice_sendpage+0x13/0x15 [<c10b4d66>] ? splice_from_pipe_begin+0x10/0x10 [<c10b527f>] do_splice_from+0x5d/0x67 [<c10b6865>] sys_splice+0x2bf/0x363 [<c129373b>] ? sysenter_exit+0xf/0x16 [<c104dc1e>] ? trace_hardirqs_on_caller+0x10e/0x13f [<c129370c>] sysenter_do_call+0x12/0x32 Code: 83 c4 0c 5b 5e 5f c9 c3 55 b9 04 00 00 00 89 e5 57 8d 7d e4 56 53 8d 5d e4 83 ec 18 89 45 e0 89 55 dc 0f b6 70 0f c1 e6 04 01 d6 <f3> a5 be 0f 00 00 00 4e 89 d8 e8 48 ff ff ff 8b 45 e0 89 da 0f EIP: [<d88c92d4>] gf128mul_4k_lle+0x23/0x60 [gf128mul] SS:ESP 0068:d6b8dda4 CR2: 0000000000000670 ---[ end trace 4eaa2a86a8e2da24 ]--- note: hashatron[1502] exited with preempt_count 1 BUG: scheduling while atomic: hashatron/1502/0x10000002 INFO: lockdep is turned off. [...] Signed-off-by:
Nick Bowler <nbowler@elliptictech.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Matthew Daley authored
commit 7f81e25b upstream. x25_find_listener does not check that the amount of call user data given in the skb is big enough in per-socket comparisons, hence buffer overreads may occur. Fix this by adding a check. Signed-off-by:
Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Acked-by:
Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hugh Dickins authored
commit 486cf46f upstream. I don't usually pay much attention to the stale "? " addresses in stack backtraces, but this lucky report from Pawel Sikora hints that mremap's move_ptes() has inadequate locking against page migration. 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page(): kernel BUG at include/linux/swapops.h:105! RIP: 0010:[<ffffffff81127b76>] [<ffffffff81127b76>] migration_entry_wait+0x156/0x160 [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0 [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120 [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310 [<ffffffff81102a31>] handle_mm_fault+0x181/0x310 [<ffffffff81106097>] ? vma_adjust+0x537/0x570 [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0 [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570 [<ffffffff81421d5f>] page_fault+0x1f/0x30 mremap's down_write of mmap_sem, together with i_mmap_mutex or lock, and pagetable locks, were good enough before page migration (with its requirement that every migration entry be found) came in, and enough while migration always held mmap_sem; but not enough nowadays, when there's memory hotremove and compaction. The danger is that move_ptes() lets a migration entry dodge around behind remove_migration_pte()'s back, so it's in the old location when looking at the new, then in the new location when looking at the old. Either mremap's move_ptes() must additionally take anon_vma lock(), or migration's remove_migration_pte() must stop peeking for is_swap_entry() before it takes pagetable lock. Consensus chooses the latter: we prefer to add overhead to migration than to mremapping, which gets used by JVMs and by exec stack setup. Reported-and-tested-by:
Paweł Sikora <pluto@agmk.net> Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Jean Delvare authored
commit 133d324d upstream. Since 8-bit temperature values are now handled in 16-bit struct members, values have to be cast to s8 for negative temperatures to be properly handled. This is broken since kernel version 2.6.39 (commit bce26c58.) Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Takashi Iwai authored
commit 8548c84d upstream. Commit 4b239f45 ("x86-64, mm: Put early page table high") causes a S4 regression since 2.6.39, namely the machine reboots occasionally at S4 resume. It doesn't happen always, overall rate is about 1/20. But, like other bugs, once when this happens, it continues to happen. This patch fixes the problem by essentially reverting the memory assignment in the older way. Signed-off-by:
-
Chris Boot authored
commit 0278ccd9 upstream. If firewire-sbp2 starts a login to a target that doesn't complete ORBs in a timely manner (and has to retry the login), and the module is removed before the operation times out, you end up with a null-pointer dereference and a kernel panic. [SR: This happens because sbp2_target_get/put() do not maintain module references. scsi_device_get/put() do, but at occasions like Chris describes one, nobody holds a reference to an SBP-2 sdev.] This patch cancels pending work for each unit in sbp2_remove(), which hopefully means there are no extra references around that prevent us from unloading. This fixes my crash. Signed-off-by:
Chris Boot <bootc@bootc.net> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Christoph Hellwig authored
commit 0030807c upstream Currently we have a few issues with the way the workqueue code is used to implement AIL pushing: - it accidentally uses the same workqueue as the syncer action, and thus can be prevented from running if there are enough sync actions active in the system. - it doesn't use the HIGHPRI flag to queue at the head of the queue of work items At this point I'm not confident enough in getting all the workqueue flags and tweaks right to provide a perfectly reliable execution context for AIL pushing, which is the most important piece in XFS to make forward progress when the log fills. Revert back to use a kthread per filesystem which fixes all the above issues at the cost of having a task struct and stack around for each mounted filesystem. In addition this also gives us much better ways to diagnose any issues involving hung AIL pushing and removes a small amount of code. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Stefan Priebe <s.priebe@profihost.ag> Tested-by:
-
Christoph Hellwig authored
commit 17b38471 upstream We need to check for pinned buffers even in .iop_pushbuf given that inode items flush into the same buffers that may be pinned directly due operations on the unlinked inode list operating directly on buffers. To do this add a return value to .iop_pushbuf that tells the AIL push about this and use the existing log force mechanisms to unpin it. Signed-off-by:
-
Christoph Hellwig authored
commit bc6e588a upstream If an item was locked we should not update xa_last_pushed_lsn and thus skip it when restarting the AIL scan as we need to be able to lock and write it out as soon as possible. Otherwise heavy lock contention might starve AIL pushing too easily, especially given the larger backoff once we moved xa_last_pushed_lsn all the way to the target lsn. Signed-off-by:
-
Dave Chinner authored
commit 1d8c95a3 upstream xfs: use a cursor for bulk AIL insertion Delayed logging can insert tens of thousands of log items into the AIL at the same LSN. When the committing of log commit records occur, we can get insertions occurring at an LSN that is not at the end of the AIL. If there are thousands of items in the AIL on the tail LSN, each insertion has to walk the AIL to find the correct place to insert the new item into the AIL. This can consume large amounts of CPU time and block other operations from occurring while the traversals are in progress. To avoid this repeated walk, use a AIL cursor to record where we should be inserting the new items into the AIL without having to repeat the walk. The cursor infrastructure already provides this functionality for push walks, so is a simple extension of existing code. While this will not avoid the initial walk, it will avoid repeating it tens of thousands of times during a single checkpoint commit. This version includes logic improvements from Christoph Hellwig. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Alex Elder <aelder@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
commit 2bcf6e97 upstream Start the periodic sync workers only after we have finished xfs_mountfs and thus fully set up the filesystem structures. Without this we can call into xfs_qm_sync before the quotainfo strucute is set up if the mount takes unusually long, and probably hit other incomplete states as well. Also clean up the xfs_fs_fill_super error path by using consistent label names, and removing an impossible to reach case. Signed-off-by:
Arkadiusz Miskiewicz <arekm@maven.pl> Reviewed-by:
-
Pavel Shilovsky authored
commit 5b980b01 upstream. move it to the beginning of the loop. Signed-off-by:
Pavel Shilovsky <piastryyy@gmail.com> Reviewed-by:
Steve French <sfrench@us.ibm.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Ben Skeggs authored
commit eac20953 upstream. Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Ben Skeggs authored
commit 8d3bb236 upstream. This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by:
-
Seth Forshee authored
commit 6596528e upstream. Currently all bio requests are 512 bytes, which may fail for media whose physical sector size is larger than this. Ensure these requests are not smaller than the block device logical block size. BugLink: http://bugs.launchpad.net/bugs/734883Signed-off-by:
-
Laurent Pinchart authored
commit 4d9b2ebd upstream. The uvc_mc_register_entity() function wrongfully selects the media_entity associated with a UVC entity when creating links. This results in access to uninitialized media_entity structures and can hit a BUG_ON statement in media_entity_create_link(). Fix it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Jiri Kosina authored
commit 35d851df upstream. This is basically a more generic respin of 23746a66 ("HID: magicmouse: ignore 'ivalid report id' while switching modes") which got reverted later by c3a492. It turns out that on some configurations, this is actually still the case and we are not able to detect in runtime. The device reponds with 'invalid report id' when feature report switching it into multitouch mode is sent to it. This has been silently ignored before 0825411a ("HID: bt: Wait for ACK on Sent Reports"), but since this commit, it propagates -EIO from the _raw callback . So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's how the device reacts in normal mode. Sad, but following reality. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022Reported-by:
Chase Douglas <chase.douglas@canonical.com> Reported-by:
Jaikumar Ganesh <jaikumarg@android.com> Tested-by:
Jiri Kosina <jkosina@suse.cz> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Thomas Courbon authored
commit 78a7539b upstream. Some samsung latop of the N150/N2{10,20,30} serie are badly detected by the samsung-laptop platform driver, see bug # 36082. It appears that N230 identifies itself as N150/N210/N220/N230 whereas the other identify themselves as N150/N210/220. This patch attemtp fix #36082 allowing correct identification for all the said netbook model. Reported-by:
Daniel Eklöf <daniel@ekloef.se> Signed-off-by:
Thomas Courbon <thcourbon@gmail.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
commit 5dfcc87f upstream. kmemleak is reporting that 32 bytes are being leaked by FUSE: unreferenced object 0xe373b270 (size 32): comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<b05517d7>] kmemleak_alloc+0x27/0x50 [<b0196435>] kmem_cache_alloc+0xc5/0x180 [<b02455be>] fuse_alloc_forget+0x1e/0x20 [<b0245670>] fuse_alloc_inode+0xb0/0xd0 [<b01b1a8c>] alloc_inode+0x1c/0x80 [<b01b290f>] iget5_locked+0x8f/0x1a0 [<b0246022>] fuse_iget+0x72/0x1a0 [<b02461da>] fuse_get_root_inode+0x8a/0x90 [<b02465cf>] fuse_fill_super+0x3ef/0x590 [<b019e56f>] mount_nodev+0x3f/0x90 [<b0244e95>] fuse_mount+0x15/0x20 [<b019d1bc>] mount_fs+0x1c/0xc0 [<b01b5811>] vfs_kern_mount+0x41/0x90 [<b01b5af9>] do_kern_mount+0x39/0xd0 [<b01b7585>] do_mount+0x2e5/0x660 [<b01b7966>] sys_mount+0x66/0xa0 This leak report is consistent and happens once per boot on 3.1.0-rc5-dirty. This happens if a FORGET request is queued after the fuse device was released. Reported-by:
Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Tested-by:
-
