- 26 Mar, 2024 5 commits
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This series from Brent Lu adds common helpers and board configurations to reduce the number of quirks.
-
Mark Brown authored
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>: This is the start of a series cleaning up the Mediatek drivers with some preparatory cleanups and improvements.
-
John Watts authored
Clock direction is marked as 'unsigned int' but only two values are currently used in practice. Note these down in the documentation. Signed-off-by:
John Watts <contact@jookia.org> Link: https://msgid.link/r/20240326-dai_mclk_hint-v1-1-653cbd2d78d9@jookia.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
We have a couple of duplicate logs and missing information, add __func__ consistently and make sure useful error codes are logged. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://msgid.link/r/20240325221925.206507-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
The gpio field is not used anymore, remove the leftover. This also fixes the compilation error after the ... Fixes: 9855f05e ("ASoC: fsl: imx-es8328: Switch to using gpiod API") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://msgid.link/r/20240325191341.3977321-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 25 Mar, 2024 32 commits
-
-
Brent Lu authored
Introduce "cml_rt5682_def" for cml boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
Remove sof_nau8825 board id and use adl_nau8825_def instead since SSP port assignment is the same. Reviewed-by:
-
Brent Lu authored
Remove SOF_NUM_IDISP_HDMI(3) from board quirks since the value is 3 if not defined. Reviewed-by:
-
Brent Lu authored
Remove SOF_NUM_IDISP_HDMI(3) from board quirks since the value is 3 if not defined. Reviewed-by:
-
Brent Lu authored
Introduce "rpl_da7219_def" board to reduce the number of rpl board configs. This config could support all boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
Introduce "adl_da7219_def" board to reduce the number of jsl board configs. This config could support all boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
Introduce "jsl_da7219_def" board to reduce the number of jsl board configs. This config could support all boards which implement headphone codec on SSP0 and speaker amplifiers on SSP1. Reviewed-by:
-
Brent Lu authored
PLL bypass mode requires mclk to be present. However, mclk pin is not connected in JSL boards. Here we add the SOF_DA7219_MCLK_EN quirk to improve driver readability. Reviewed-by:
-
Brent Lu authored
Add exit function to headphone codec dai link. Reviewed-by:
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure. Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure. Reviewed-by:
-
Brent Lu authored
Use intel_board module to initialize sof_card_private structure. Reviewed-by:
-
Brent Lu authored
Add a helper function for machine drivers to initialize common part of sof_card_private structure. Also unify the macros of board quirks for the initialization. Reviewed-by:
-
Brent Lu authored
Rename the quirk in preparation for future changes: common quriks will be defined and handled in board helper module. Reviewed-by:
-
Brent Lu authored
This commit supports RPL boards which implement ALC5650 dual I2S interface codec. SSP port usage: HP: SSP0 -> AIF1 SPK: SSP1 -> AIF2 BT: SSP2 -> BT Reviewed-by:
-
Brent Lu authored
This configuration supports RPL boards which implement DA7219 on SSP0 and MAX98360A on SSP1. DA7219 uses PLL bypass mode to avoid WCLK locking problem. To use this mode, the MCLK frequency must be 12.288 or 24.576MHz in the topology binary. Reviewed-by:
-
Brent Lu authored
Since there is a helper function to generate entire DAI link array, we switch individual dai link helpers to static function. No functional change in this commit. Reviewed-by:
-
Brent Lu authored
Use intel_board module to generate DAI link array and update num_links field in snd_soc_card structure. Reviewed-by:
-
Brent Lu authored
Add an new field link_id_overwrite to sof_card_private structure to support machine drivers which DAI link ID is fixed number or discontinue (i.e. no-codec boards). If this field is zero, DAI array index will be used as link ID. Otherwise the value extracted from link_id_overwrite will be used. The field link_id_overwrite is supposed to be initialized by SOF_LINK_IDS macro like following example. ctx->link_id_overwrite = SOF_LINK_IDS(HEADPHONE_BE_ID, \ DMIC01_BE_ID, \ DMIC16K_BE_ID, \ IDISP_HDMI_BE_ID, \ SPK_BE_ID, \ BT_OFFLOAD_BE_ID, \ HDMI_IN_BE_ID) An exception is that, if you use link_order_overwrite to overwrite DAI link order, then you need to use the same order to build link_id_overwrite variable as well. Reviewed-by:
-
Kartik Agarwala authored
Convert WM8974 audio CODEC bindings from text to dtschema. Signed-off-by:
Kartik Agarwala <agarwala.kartik@gmail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://msgid.link/r/20240325181943.116733-1-agarwala.kartik@gmail.comSigned-off-by:
-
Frank Li authored
Convert fsl,esai.txt to yaml. So DTB_CHECK tools can verify dts file about esai part. clock-names 'spba' is optional according to description. So minItems of clocks and clock-names is 3. Signed-off-by:
Frank Li <Frank.Li@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://msgid.link/r/20240322145406.2613256-1-Frank.Li@nxp.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
MediaTek sound card drivers are checking whether a DAI link is present and used on a board to assign the correct parameters and this is done by checking the codec DAI names at probe time. If no real codec is present, assign the dummy codec to the DAI link to avoid NULL pointer during string comparison. Fixes: 4302187d ("ASoC: mediatek: common: add soundcard driver common code") Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://msgid.link/r/20240313110147.1267793-5-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Both the enumerations for UL/DL rates, delay data and the functions adda_{dl,ul}_rate_transform were duplicated for each MediaTek SoC dai-adda driver: move the common bits to a new mtk-dai-adda-common file and its header. While at it, also add the "mtk_" prefix to the exported functions. Signed-off-by: -
AngeloGioacchino Del Regno authored
Simplify the probe function by switching error prints to return dev_err_probe(), lowering the lines count; while at it, also beautify some messages and change some others' level from warn to error. Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Link: https://msgid.link/r/20240313110147.1267793-3-angelogioacchino.delregno@collabora.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
Switch from pm_runtime_enable() to devm_pm_runtime_enable(), allowing to remove all gotos from the probe function. Signed-off-by:
-
Andy Shevchenko authored
This updates the driver to gpiod API, and removes yet another use of of_get_named_gpio(). Signed-off-by:
-
Alexander Stein authored
This happens especially if this driver is built-in, but SDMA driver is configured as module. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://msgid.link/r/20240314141642.2943605-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Kartik Agarwala authored
Convert WM8776 audio CODEC bindings from text to dtschema. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by:
-
Vijendar Mukunda authored
The CONFIG_SOUNDWIRE_AMD is a user-visible option, it should be never selected by another driver. So replace the extra complexity with a normal Kconfig dependency in SND_SOC_AMD_SOUNDWIRE. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://msgid.link/r/20240322112018.3063344-1-Vijendar.Mukunda@amd.comSigned-off-by:
-
Frank Li authored
Convert fsl,audmix.txt to yaml to let dtb check tools check audmix part. Signed-off-by:
-
- 24 Mar, 2024 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Fix logic that is supposed to prevent placement of the kernel image below LOAD_PHYSICAL_ADDR - Use the firmware stack in the EFI stub when running in mixed mode - Clear BSS only once when using mixed mode - Check efi.get_variable() function pointer for NULL before trying to call it * tag 'efi-fixes-for-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: fix panic in kdump kernel x86/efistub: Don't clear BSS twice in mixed mode x86/efistub: Call mixed mode boot services on the firmware's stack efi/libstub: fix efi_random_alloc() to allocate memory at alloc_min or higher address
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Ensure that the encryption mask at boot is properly propagated on 5-level page tables, otherwise the PGD entry is incorrectly set to non-encrypted, which causes system crashes during boot. - Undo the deferred 5-level page table setup as it cannot work with memory encryption enabled. - Prevent inconsistent XFD state on CPU hotplug, where the MSR is reset to the default value but the cached variable is not, so subsequent comparisons might yield the wrong result and as a consequence the result prevents updating the MSR. - Register the local APIC address only once in the MPPARSE enumeration to prevent triggering the related WARN_ONs() in the APIC and topology code. - Handle the case where no APIC is found gracefully by registering a fake APIC in the topology code. That makes all related topology functions work correctly and does not affect the actual APIC driver code at all. - Don't evaluate logical IDs during early boot as the local APIC IDs are not yet enumerated and the invoked function returns an error code. Nothing requires the logical IDs before the final CPUID enumeration takes place, which happens after the enumeration. - Cure the fallout of the per CPU rework on UP which misplaced the copying of boot_cpu_data to per CPU data so that the final update to boot_cpu_data got lost which caused inconsistent state and boot crashes. - Use copy_from_kernel_nofault() in the kprobes setup as there is no guarantee that the address can be safely accessed. - Reorder struct members in struct saved_context to work around another kmemleak false positive - Remove the buggy code which tries to update the E820 kexec table for setup_data as that is never passed to the kexec kernel. - Update the resource control documentation to use the proper units. - Fix a Kconfig warning observed with tinyconfig * tag 'x86-urgent-2024-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Move 5-level paging global variable assignments back x86/boot/64: Apply encryption mask to 5-level pagetable update x86/cpu: Add model number for another Intel Arrow Lake mobile processor x86/fpu: Keep xfd_state in sync with MSR_IA32_XFD Documentation/x86: Document that resctrl bandwidth control units are MiB x86/mpparse: Register APIC address only once x86/topology: Handle the !APIC case gracefully x86/topology: Don't evaluate logical IDs during early boot x86/cpu: Ensure that CPU info updates are propagated on UP kprobes/x86: Use copy_from_kernel_nofault() to read from unsafe address x86/pm: Work around false positive kmemleak report in msr_build_context() x86/kexec: Do not update E820 kexec table for setup_data x86/config: Fix warning for 'make ARCH=x86_64 tinyconfig'
-
