- 28 Oct, 2005 3 commits
-
-
Paul Mackerras authored
We still had an old copy of i8259.h lying around; this gets rid of it and corrects the callers of i8259_init and i8259_irq. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
Since I sent the patch to purge bootinfo.h from ARCH=powerpc and ARCH=ppc64, setup-common.c has come into existence, and another #include of bootinfo.h slipped in. This patch removes it. It also removes include/asm-ppc64/bootinfo.h, which somehow survived the previous patch which was supposed to remove it. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
For the current time idle_6xx only applies to 6xx ppc32 CPUs Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 27 Oct, 2005 17 commits
-
-
Paul Mackerras authored
... which is needed now that ARCH=ppc64 is using the merged setup_64.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
My G5 was being reported as an OldWorld in /proc/cpuinfo, which is obviously not right... :) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
On 32-bit platforms, these convert from kernel virtual addresses to real (physical addresses), like tophys/tovirt but they use the same register for the source and destination. On 64-bit platforms, they do nothing because the hardware ignores the top two bits of the address in real mode. These new macros are used in fpu.S now. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Untested, but "should" work... at least this way it compiles. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
do_dabr() is not relevant on 40x or Book-E processors so dont build it Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
In readiness for 64k pages, when THREAD_SIZE will be less than PAGE_SIZE, ppc64 uses kmalloc() rather than __get_free_pages() to allocate kernel stacks, and since thread_info.h was merged, so does ppc32. However that adds some overhead which we don't really want when PAGE_SIZE <= THREAD_SIZE (including all ppc32 machines), so this patch avoids it. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
Save for the header #define, ppc32 and ppc64 versions of parport.h are identical. This patch merges them. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
With ARCH=powerpc we assume the presence of a device tree, so we don't require any support for the old bi_recs method of passing boot parameters. Likewise, we've never needed it for ppc64, but we still had an include/asm-ppc64/bootinfo.h from which nothing was used. This patch removes that file, and all references to it in arch/ppc64 and arch/powerpc. A related, unused variable 'boot_mem_size' is also removed from setup_32.c. The bootinfo stuff remains in ARCH=ppc for the time being. Built and booted on Power5 (ARCH=ppc64 and ARCH=powerpc), built for 32-bit powermac (ARCH=powerpc and ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
and use setup_64.c from the merged tree instead. The only difference between them was the code to set up the syscall maps. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
This depends on the 64bit dma_addr_t patch. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
There has been a need expressed for dma_addr_t to be 64 bits on PPC64. This patch does that. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
The recent addition of __deprecated to the declarations for find_devices etc. produces a whole pile of warnings from the ppc32 code. Since those functions still work perfectly well on ppc32, which doesn't have hotplug support for anything in the OF device tree, and we don't have time to fix that code now, remove the __deprecated markings for now. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This should have been in commit 03501dab but got missed by accident. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 26 Oct, 2005 20 commits
-
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
We were computing the wrong address for the MPIC timer registers, so when we went to initialize them we would have been hitting some unrelated ioremap... oops. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This trims off the extra unusable memory from the lmb structure, so we don't try to use it. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Talk about buggy firmware... the OF on the Longtrail returns 0 from the claim client service rather than -1 when the claim fails. It also has no device_type on the /memory node and blows up if the output buffer for package-to-path is too big. This also fixes a bug with calling alloc_up with align == 0, where we did _ALIGN_UP(alloc_bottom, 0) which will end up as 0. Lastly, we now check the return value (in r3) from calling the prom, and return -1 from call_prom if we get a negative value back. That is supposed to indicate that the requested client service doesn't exist. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
SMP still needs more work but UP gets as far as starting userspace at least. This uses the 64-bit-style code for spinning up the cpus. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
If the machine's clock is set to a bogus value, this check resulted in userland waiting effectively forever for the RTC value to change, so remove the check. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
The interrupt-tree parsing code wasn't offsetting interrupt numbers by 16 on 32-bit platforms with an i8259 interrupt controller, and it was confused about the encoding of interrupt sense and level (which is different for i8259 and openpic interrupt controllers, just to make things interesting). Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This is so that the 32-bit CHRP code can use it. The MPC106 initialization code is now in arch/powerpc/sysdev/grackle.c and is controlled by CONFIG_PPC_MPC106. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This creates a new arch/powerpc/kernel/setup-common.c with various bits that setup_32.c and setup_64.c had in common - functions like machine_shutdown/restart/power_off, show_cpuinfo, set_preferred_console etc. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c, which contains generic RTAS functions useful on any CHRP platform, and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain some pSeries-specific firmware flashing bits. The parts of rtas.c that are to do with pSeries-specific error logging are protected by a new CONFIG_RTAS_ERROR_LOGGING symbol. The inclusion of rtas.o is controlled by the CONFIG_PPC_RTAS symbol, and the relevant platforms select that. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This changes the parameters for i8259_init so that it takes two parameters: a physical address for generating an interrupt acknowledge cycle, and an interrupt number offset. i8259_init now sets the irq_desc[] for its interrupts; all the callers were doing this, and that code is gone now. This also defines a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and makes the platforms that need it select that symbol. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This defines a CONFIG_INDIRECT_PCI symbol to control whether it gets used or not, and fixes the Kconfig to select that symbol for platforms that need it. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
ras.o is only built for CONFIG_PPC_PSERIES, so move it into arch/powerpc/platforms/pseries. Update Makefiles to suit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Move firmware.h into include/asm-powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
GCC 3.3.3 barfs on the trailing \n" in the HMT macros. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Michael Ellerman authored
Somewhere along the line we got two definitions of set_tb(). They look to be identical although they're not textually identical. So remove the #ifdef CONFIG_PPC64 version, leaving the common version in time.h. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
* Removed of_show_percpuinfo and just report CPU frequency in generic show_cpuinfo code. * Killed OCP and PPC_SYS related code which doesn't belong in the merge tree Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Kumar Gala authored
We need to initialize some control SPRS for timers on Book-E before we start taking decrementer interrupts. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Becky Bruce authored
A recent patch updated the name of pci_assign_all_busses to pci_assign_all_buses. This instance of its use wasn't corrected by the original patch to use the new name. Builds cleanly on ads8272. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-