- 29 Mar, 2017 9 commits
-
-
Sankar Patchineelam authored
Net device reset can fail when the h/w or f/w is in a bad state. Subsequent netdevice open fails in bnxt_hwrm_stat_ctx_alloc(). The cleanup invokes bnxt_hwrm_resource_free() which inturn calls bnxt_disable_int(). In this routine, the code segment if (ring->fw_ring_id != INVALID_HW_RING_ID) BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons); results in NULL pointer dereference as cpr->cp_doorbell is not yet initialized, and fw_ring_id is zero. The fix is to initialize cpr fw_ring_id to INVALID_HW_RING_ID before bnxt_init_chip() is invoked. Signed-off-by:
Sankar Patchineelam <sankar.patchineelam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
The code following l2tp_tunnel_find() expects that a new reference is held on sk. Either sk_receive_skb() or the discard_put error path will drop a reference from the tunnel's socket. This issue exists in both l2tp_ip and l2tp_ip6. Fixes: a3c18422 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()") Signed-off-by:
-
Jarno Rajahalme authored
The reference count held for skb needs to be released when the skb's nfct pointer is cleared regardless of if nf_ct_delete() is called or not. Failing to release the skb's reference cound led to deferred conntrack cleanup spinning forever within nf_conntrack_cleanup_net_list() when cleaning up a network namespace: kworker/u16:0-19025 [004] 45981067.173642: sched_switch: kworker/u16:0:19025 [120] R ==> rcu_preempt:7 [120] kworker/u16:0-19025 [004] 45981067.173651: kernel_stack: <stack trace> => ___preempt_schedule (ffffffffa001ed36) => _raw_spin_unlock_bh (ffffffffa0713290) => nf_ct_iterate_cleanup (ffffffffc00a4454) => nf_conntrack_cleanup_net_list (ffffffffc00a5e1e) => nf_conntrack_pernet_exit (ffffffffc00a63dd) => ops_exit_list.isra.1 (ffffffffa06075f3) => cleanup_net (ffffffffa0607df0) => process_one_work (ffffffffa0084c31) => worker_thread (ffffffffa008592b) => kthread (ffffffffa008bee2) => ret_from_fork (ffffffffa071b67c) Fixes: dd41d33f ("openvswitch: Add force commit.") Reported-by:
Yang Song <yangsong@vmware.com> Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
-
Arnd Bergmann authored
gcc-7 reports a warning that earlier versions did not have: drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_port_stp_update': arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&prev_ctrls+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] *((short *)to + 2) = *((short *)from + 2); ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/rocker/rocker_ofdpa.c:2218:7: note: '*((void *)&prev_ctrls+4)' was declared here This is clearly a variation of the warning about 'prev_state' that was shut up using uninitialized_var(). We can slightly simplify the code and get rid of the warning by unconditionally saving the prev_state and prev_ctrls variables. The inlined memcpy is not particularly expensive here, as it just has to read five bytes from one or two cache lines. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Talat Batheesh authored
In NETDEV_CHANGEUPPER event the upper_info field is valid only when linking is true. Otherwise it should be ignored. Fixes: 7907f23a (net/mlx5: Implement RoCE LAG feature) Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Reviewed-by:
Aviv Heller <avivh@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jonas Jensen authored
moxart_mac_start_xmit() doesn't care where tx_tail is, tx_head can catch and pass tx_tail, which is bad because moxart_tx_finished() isn't guaranteed to catch up on freeing resources from tx_tail. Add a check in moxart_mac_start_xmit() stopping the queue at the end of the circular buffer. Also add a check in moxart_tx_finished() waking the queue if the buffer has TX_WAKE_THRESHOLD or more free descriptors. While we're at it, move spin_lock_irq() to happen before our descriptor pointer is assigned in moxart_mac_start_xmit(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=99451Signed-off-by:
Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized value ending up in the cardnr parameter: drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer': drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized] cparams.cardnr = cdef.cardnr; This has been broken since before the start of the git history, so either the value is not used for anything important, or the ioctl command doesn't get called in practice. Setting the cardnr to zero avoids the warning and makes sure we have consistent behavior. Signed-off-by:
-
Xin Long authored
David Laight noticed the support for MSG_MORE with datamsg->force_delay didn't really work as we expected, as the first msg with MSG_MORE set would always block the following chunks' dequeuing. This Patch is to rewrite it by saving the MSG_MORE flag into assoc as David Laight suggested. asoc->force_delay is used to save MSG_MORE flag before a msg is sent. All chunks in queue would not be sent out if asoc->force_delay is set by the msg with MSG_MORE flag, until a new msg without MSG_MORE flag clears asoc->force_delay. Note that this change would not affect the flush is generated by other triggers, like asoc->state != ESTABLISHED, queue size > pmtu etc. v1->v2: Not clear asoc->force_delay after sending the msg with MSG_MORE flag. Fixes: 4ea0c32f ("sctp: add support for MSG_MORE") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
David Laight <david.laight@aculab.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
- 28 Mar, 2017 1 commit
-
-
Mark Rutland authored
Our chosen ic_dev may be anywhere in our list of ic_devs, and we may free it before attempting to close others. When we compare d->dev and ic_dev->dev, we're potentially dereferencing memory returned to the allocator. This causes KASAN to scream for each subsequent ic_dev we check. As there's a 1-1 mapping between ic_devs and netdevs, we can instead compare d and ic_dev directly, which implicitly handles the !ic_dev case, and avoids the use-after-free. The ic_dev pointer may be stale, but we will not dereference it. Original splat: [ 6.487446] ================================================================== [ 6.494693] BUG: KASAN: use-after-free in ic_close_devs+0xc4/0x154 at addr ffff800367efa708 [ 6.503013] Read of size 8 by task swapper/0/1 [ 6.507452] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-00002-gda42158 #8 [ 6.514993] Hardware name: AppliedMicro Mustang/Mustang, BIOS 3.05.05-beta_rc Jan 27 2016 [ 6.523138] Call trace: [ 6.525590] [<ffff200008094778>] dump_backtrace+0x0/0x570 [ 6.530976] [<ffff200008094d08>] show_stack+0x20/0x30 [ 6.536017] [<ffff200008bee928>] dump_stack+0x120/0x188 [ 6.541231] [<ffff20000856d5e4>] kasan_object_err+0x24/0xa0 [ 6.546790] [<ffff20000856d924>] kasan_report_error+0x244/0x738 [ 6.552695] [<ffff20000856dfec>] __asan_report_load8_noabort+0x54/0x80 [ 6.559204] [<ffff20000aae86ac>] ic_close_devs+0xc4/0x154 [ 6.564590] [<ffff20000aaedbac>] ip_auto_config+0x2ed4/0x2f1c [ 6.570321] [<ffff200008084b04>] do_one_initcall+0xcc/0x370 [ 6.575882] [<ffff20000aa31de8>] kernel_init_freeable+0x5f8/0x6c4 [ 6.581959] [<ffff20000a16df00>] kernel_init+0x18/0x190 [ 6.587171] [<ffff200008084710>] ret_from_fork+0x10/0x40 [ 6.592468] Object at ffff800367efa700, in cache kmalloc-128 size: 128 [ 6.598969] Allocated: [ 6.601324] PID = 1 [ 6.603427] save_stack_trace_tsk+0x0/0x418 [ 6.607603] save_stack_trace+0x20/0x30 [ 6.611430] kasan_kmalloc+0xd8/0x188 [ 6.615087] ip_auto_config+0x8c4/0x2f1c [ 6.619002] do_one_initcall+0xcc/0x370 [ 6.622832] kernel_init_freeable+0x5f8/0x6c4 [ 6.627178] kernel_init+0x18/0x190 [ 6.630660] ret_from_fork+0x10/0x40 [ 6.634223] Freed: [ 6.636233] PID = 1 [ 6.638334] save_stack_trace_tsk+0x0/0x418 [ 6.642510] save_stack_trace+0x20/0x30 [ 6.646337] kasan_slab_free+0x88/0x178 [ 6.650167] kfree+0xb8/0x478 [ 6.653131] ic_close_devs+0x130/0x154 [ 6.656875] ip_auto_config+0x2ed4/0x2f1c [ 6.660875] do_one_initcall+0xcc/0x370 [ 6.664705] kernel_init_freeable+0x5f8/0x6c4 [ 6.669051] kernel_init+0x18/0x190 [ 6.672534] ret_from_fork+0x10/0x40 [ 6.676098] Memory state around the buggy address: [ 6.680880] ffff800367efa600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.688078] ffff800367efa680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.695276] >ffff800367efa700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.702469] ^ [ 6.705952] ffff800367efa780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 6.713149] ffff800367efa800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 6.720343] ================================================================== [ 6.727536] Disabling lock debugging due to kernel taint Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: David S. Miller <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by:
-
- 27 Mar, 2017 1 commit
-
-
Florian Fainelli authored
Andrew has been contributing a lot to PHYLIB over the past months and his feedback on patches is more than welcome. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 26 Mar, 2017 3 commits
-
-
Alexey Khoroshilov authored
vlsi_alloc_ring() checks for DMA mapping errors by comparing returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Arnd Bergmann authored
hns_dsaf_set_mac_key() calls dsaf_set_field() on an uninitialized field, which will then change only a few of its bits, causing a warning with the latest gcc: hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_mac_uc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] (origin) &= (~(mask)); \ ^~ hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_mac_mc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_add_mac_mc_port': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_del_mac_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_rm_mac_addr': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_del_mac_mc_port': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_mac_uc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_get_mac_mc_entry': hisilicon/hns/hns_dsaf_reg.h:1046:12: error: 'mac_key.low.bits.port_vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized] The code is actually correct since we always set all 16 bits of the port_vlan field, but gcc correctly points out that the first access does contain uninitialized data. This initializes the field to zero first before setting the individual bits. Fixes: 5483bfcb ("net: hns: modify tcam table and set mac key") Signed-off-by: -
Arnd Bergmann authored
When dev_dbg() is enabled, we print uninitialized data, as gcc-7.0.1 now points out: ethernet/hisilicon/hns/hns_dsaf_main.c: In function 'hns_dsaf_set_promisc_tcam': ethernet/hisilicon/hns/hns_dsaf_main.c:2947:75: error: 'tbl_tcam_data.low.val' may be used uninitialized in this function [-Werror=maybe-uninitialized] ethernet/hisilicon/hns/hns_dsaf_main.c:2947:75: error: 'tbl_tcam_data.high.val' may be used uninitialized in this function [-Werror=maybe-uninitialized] We also pass the data into hns_dsaf_tcam_mc_cfg(), which might later use it (not sure about that), so it seems safer to just always initialize the tbl_tcam_data structure. Fixes: 1f5fa2dd ("net: hns: fix for promisc mode in HNS driver") Signed-off-by:
-
- 25 Mar, 2017 4 commits
-
-
Alexei Starovoitov authored
llvm can optimize the 'if (ptr > data_end)' checks to be in the order slightly different than the original C code which will confuse verifier. Like: if (ptr + 16 > data_end) return TC_ACT_SHOT; // may be followed by if (ptr + 14 > data_end) return TC_ACT_SHOT; while llvm can see that 'ptr' is valid for all 16 bytes, the verifier could not. Fix verifier logic to account for such case and add a test. Reported-by:
Huapeng Zhou <hzhou@fb.com> Fixes: 969bf05e ("bpf: direct packet access") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Eric Dumazet authored
We got a report of yet another bug in ping http://www.openwall.com/lists/oss-security/2017/03/24/6 ->disconnect() is not called with socket lock held. Fix this by acquiring ping rwlock earlier. Thanks to Daniel, Alexander and Andrey for letting us know this problem. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Daniel Jiang <danieljiang0415@gmail.com> Reported-by:
Solar Designer <solar@openwall.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Alexander Duyck authored
When testing the epoll w/ busy poll code I found that I could get into a state where the i40e driver had q_vectors w/ active NAPI that had no rings. This was resulting in a divide by zero error. To correct it I am updating the driver code so that we only support NAPI on q_vectors that have 1 or more rings allocated to them. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Florian Westphal authored
Unfortunately too many devices (not under our control) use tcp_tw_recycle=1, which depends on timestamps being identical of the same saddr. Although tcp_tw_recycle got removed in net-next we can't make such end hosts disappear so downgrade to per-host timestamp offsets. Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reported-by:
Yvan Vanrossomme <yvan@vanrossomme.net> Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 24 Mar, 2017 18 commits
-
-
Alexander Duyck authored
This change basically codifies what I think was already the limitations on the busy_poll and busy_read sysctl interfaces. We weren't checking the lower bounds and as such could input negative values. The behavior when that was used was dependent on the architecture. In order to prevent any issues with that I am just disabling support for values less than 0 since this way we don't have to worry about any odd behaviors. By limiting the sysctl values this way it also makes it consistent with how we handle the SO_BUSY_POLL socket option since the value appears to be reported as a signed integer value and negative values are rejected. Signed-off-by:
-
Jeff Kirsher authored
This reverts commit 7e54d9d0. After additional regression testing, several users are experiencing kernel panics during shutdown on e1000e devices. Reverting this change resolves the issue. Signed-off-by:
-
WANG Cong authored
There is no reason to continue after a copy_from_user() failure. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The latest gcc-7 snapshot warns about bfa_ioc_send_enable/bfa_ioc_send_disable writing undefined values into the hardware registers: drivers/net/ethernet/brocade/bna/bfa_ioc.c: In function 'bfa_iocpf_sm_disabling_entry': arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+4)' is used uninitialized in this function [-Werror=uninitialized] arch/arm/include/asm/io.h:109:22: error: '*((void *)&disable_req+8)' is used uninitialized in this function [-Werror=uninitialized] The two functions look like they should do the same thing, but only one of them initializes the time stamp and clscode field. The fact that we only get a warning for one of the two functions seems to be arbitrary, based on the inlining decisions in the compiler. To address this, I'm making both functions do the same thing: - set the clscode from the ioc structure in both - set the time stamp from ktime_get_real_seconds (which also avoids the signed-integer overflow in 2038 and extends the well-defined behavior until 2106). - zero-fill the reserved field Fixes: 8b230ed8 ("bna: Brocade 10Gb Ethernet device driver") Signed-off-by:
-
David S. Miller authored
Ursula Braun says: ==================== s390/qeth patches for net here are 2 s390/qeth patches built for net fixing a problem with AF_IUCV traffic through HiperSockets. And we come up with an update for the MAINTAINERS file to establish Julian as Co-Maintainer for drivers/s390/net and net/iucv. ==================== Signed-off-by: -
Ursula Braun authored
Add Julian Wiedmann as additional maintainer for drivers/s390/net and net/iucv. Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr() fills this ETH header... and then immediately moves it to the skb's headroom, where it disappears and is never seen again. But it's still possible for us to return NETDEV_TX_BUSY after the skb has been modified. Since we didn't get a private copy of the skb, the next time the skb is delivered to hard_start_xmit() it no longer has the expected layout (we moved the ETH header to the headroom, so skb->data now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr() does another round of rebuilding, the resulting qeth header ends up all wrong. On transmission, the buffer is then rejected by the HiperSockets device with SBALF15 = x'04'. When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it tears down the offending socket. As the ETH header for AF_IUCV serves no purpose, just align the code to what we do for IP traffic on L3 HiperSockets: keep the ETH header at skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer(). When mapping the payload into the SBAL elements, the ETH header is then stripped off. This avoids the skb manipulations in qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit() after NETDEV_TX_BUSY is now processed properly. Signed-off-by:
Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Depending on the device type, hard_start_xmit() builds different output buffer formats. For instance with HiperSockets, on both L2 and L3 we strip the ETH header from the skb - L3 doesn't need it, and L2 carries it in the buffer's header element. For this, we pass data_offset = ETH_HLEN all the way down to __qeth_fill_buffer(), where skb->data is then adjusted accordingly. But the initial size calculation still considers the *full* skb length (including the ETH header). So qeth_get_elements_no() can erroneously reject a skb as too big, even though it would actually fit into an output buffer once the ETH header has been trimmed off later. Fix this by passing an additional offset to qeth_get_elements_no(), that indicates where in the skb the on-wire data actually begins. Since the current code uses data_offset=-1 for some special handling on OSA, we need to clamp data_offset to 0... On HiperSockets this helps when sending ~MTU-size skbs with weird page alignment. No change for OSA or AF_IUCV. Signed-off-by:
-
David S. Miller authored
Pavel Belous says: ==================== net:ethernet:aquantia: Misc fixes for atlantic driver. The following patchset containg several fixes for aQuantia AQtion driver for net tree: A couple fixes for IPv6 and other fixes. v1->v2: Fix compilation error (using HW_ATL_A0_TXD_CTL_CMD_IPV6 instead HW_ATL_B0_TXD_CTL_CMD_IPV6). v2->v3: Added "Fixes" tags. ==================== Signed-off-by: -
Pavel Belous authored
We need to reset is_gso flag when EOP reached (entire LSO packet processed). Fixes: bab6de8f ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
-
Pavel Belous authored
Fix Context Command bit: L3 type = "0" for IPv4, "1" for IPv6. Fixes: bab6de8f ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by:
-
Pavel Belous authored
Fix for missing initialization aq_ring header.lock spinlock. Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Signed-off-by:
-
Pavel Belous authored
In order for the checksum offloads to work correctly we need to set the packet type bit (TCP/UDP) in the TX context buffer. Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by:
David Arcari <darcari@redhat.com> Signed-off-by:
-
Pavel Belous authored
Closing/opening the adapter is not needed at all. The new MTU settings take effect immediately. Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by:
-
hayeswang authored
The linking status may be changed when autosuspend. And, after autoresume, the driver may try to transmit packets when the device is carrier off, because the interrupt transfer doesn't update the linking status, yet. And, if the device is in ALDPS mode, the device would stop working. The another similar case is 1. unplug the cable. 2. interrupt transfer queue a work_queue for linking change. 3. device enters the ALDPS mode. 4. a tx occurs before the work_queue is called. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Nathan Sullivan authored
If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Acked-by:
Xander Huff <xander.huff@ni.com> Acked-by:
Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by:
-
Eric Dumazet authored
Dmitry posted a nice reproducer of a bug triggering in neigh_probe() when dereferencing a NULL neigh->ops->solicit method. This can happen for arp_direct_ops/ndisc_direct_ops and similar, which can be used for NUD_NOARP neighbours (created when dev->header_ops is NULL). Admin can then force changing nud_state to some other state that would fire neigh timer. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Florian Fainelli authored
We can build modular code that uses mdiobus_register_board_info() which would lead to linking failure since this symbol is not expoerted. Fixes: 648ea013 ("net: phy: Allow pre-declaration of MDIO devices") Signed-off-by:
-
- 23 Mar, 2017 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "This contains the collection of small fixes for 4.11 that were pending during my vacation: - a few HD-audio quirks (more Dell headset support, docking station support on HP laptops) - a regression fix for the previous ctxfi DMA mask fix - a correction of the new CONFIG_SND_X86 menu entry - a fix for the races in ALSA sequencer core spotted by syzkaller" * tag 'sound-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Adding a group of pin definition to fix headset problem ALSA: seq: Fix racy cell insertions during snd_seq_pool_done() ALSA: x86: Make CONFIG_SND_X86 bool ALSA: hda - add support for docking station for HP 840 G3 ALSA: hda - add support for docking station for HP 820 G2 ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call -
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Zygo tracked down a very old bug with inline compressed extents. I didn't tag this one for stable because I want to do individual tested backports. It's a little tricky and I'd rather do some extra testing on it along the way" * 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: add missing memset while reading compressed inline extents Btrfs: fix regression in lock_delalloc_pages btrfs: remove btrfs_err_str function from uapi/linux/btrfs.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Several netfilter fixes from Pablo and the crew: - Handle fragmented packets properly in netfilter conntrack, from Florian Westphal. - Fix SCTP ICMP packet handling, from Ying Xue. - Fix big-endian bug in nftables, from Liping Zhang. - Fix alignment of fake conntrack entry, from Steven Rostedt. 2) Fix feature flags setting in fjes driver, from Taku Izumi. 3) Openvswitch ipv6 tunnel source address not set properly, from Or Gerlitz. 4) Fix jumbo MTU handling in amd-xgbe driver, from Thomas Lendacky. 5) sk->sk_frag.page not released properly in some cases, from Eric Dumazet. 6) Fix RTNL deadlocks in nl80211, from Johannes Berg. 7) Fix erroneous RTNL lockdep splat in crypto, from Herbert Xu. 8) Cure improper inflight handling during AF_UNIX GC, from Andrey Ulanov. 9) sch_dsmark doesn't write to packet headers properly, from Eric Dumazet. 10) Fix SCM_TIMESTAMPING_OPT_STATS handling in TCP, from Soheil Hassas Yeganeh. 11) Add some IDs for Motorola qmi_wwan chips, from Tony Lindgren. 12) Fix nametbl deadlock in tipc, from Ying Xue. 13) GRO and LRO packets not counted correctly in mlx5 driver, from Gal Pressman. 14) Fix reset of internal PHYs in bcmgenet, from Doug Berger. 15) Fix hashmap allocation handling, from Alexei Starovoitov. 16) nl_fib_input() needs stronger netlink message length checking, from Eric Dumazet. 17) Fix double-free of sk->sk_filter during sock clone, from Daniel Borkmann. 18) Fix RX checksum offloading in aquantia driver, from Pavel Belous. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) net:ethernet:aquantia: Fix for RX checksum offload. amd-xgbe: Fix the ECC-related bit position definitions sfc: cleanup a condition in efx_udp_tunnel_del() Bluetooth: btqcomsmd: fix compile-test dependency inet: frag: release spinlock before calling icmp_send() tcp: initialize icsk_ack.lrcvtime at session start time genetlink: fix counting regression on ctrl_dumpfamily() socket, bpf: fix sk_filter use after free in sk_clone_lock ipv4: provide stronger user input validation in nl_fib_input() bpf: fix hashmap extra_elems logic enic: update enic maintainers net: bcmgenet: remove bcmgenet_internal_phy_setup() ipv6: make sure to initialize sockc.tsflags before first use fjes: Do not load fjes driver if extended socket device is not power on. fjes: Do not load fjes driver if system does not have extended socket device. net/mlx5e: Count LRO packets correctly net/mlx5e: Count GSO packets correctly net/mlx5: Increase number of max QPs in default profile net/mlx5e: Avoid supporting udp tunnel port ndo for VF reps net/mlx5e: Use the proper UAPI values when offloading TC vlan actions ... -
Hui Wang authored
A new Dell laptop needs to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to fix the headset problem, and the pin definiton of this machine is not in the pin quirk table yet, now adding it to the table. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
