- 27 May, 2021 7 commits
-
-
Maciej S. Szmigiero authored
The KVM selftest framework was using a simple list for keeping track of the memslots currently in use. This resulted in lookups and adding a single memslot being O(n), the later due to linear scanning of the existing memslot set to check for the presence of any conflicting entries. Before this change, benchmarking high count of memslots was more or less impossible as pretty much all the benchmark time was spent in the selftest framework code. We can simply use a rbtree for keeping track of both of gfn and hva. We don't need an interval tree for hva here as we can't have overlapping memslots because we allocate a completely new memory chunk for each new memslot. Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Message-Id: <b12749d47ee860468240cf027412c91b76dbe3db.1618253574.git.maciej.szmigiero@oracle.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs may not be continuous if same memslot is used for data and page table allocation. kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs) because it does not try to read file data page by page. Fix this mismatch by allocating memory in one step. Reported-by:
Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by:
-
Zhenzhong Duan authored
The extra memory pages is missed to be allocated during VM creating. perf_test_util and kvm_page_table_test use it to alloc extra memory currently. Fix it by adding extra_mem_pages to the total memory calculation before allocate. Signed-off-by:
-
Wanpeng Li authored
WARNING: suspicious RCU usage 5.13.0-rc1 #4 Not tainted ----------------------------- ./include/linux/kvm_host.h:710 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by hyperv_clock/8318: #0: ffffb6b8cb05a7d8 (&hv->hv_lock){+.+.}-{3:3}, at: kvm_hv_invalidate_tsc_page+0x3e/0xa0 [kvm] stack backtrace: CPU: 3 PID: 8318 Comm: hyperv_clock Not tainted 5.13.0-rc1 #4 Call Trace: dump_stack+0x87/0xb7 lockdep_rcu_suspicious+0xce/0xf0 kvm_write_guest_page+0x1c1/0x1d0 [kvm] kvm_write_guest+0x50/0x90 [kvm] kvm_hv_invalidate_tsc_page+0x79/0xa0 [kvm] kvm_gen_update_masterclock+0x1d/0x110 [kvm] kvm_arch_vm_ioctl+0x2a7/0xc50 [kvm] kvm_vm_ioctl+0x123/0x11d0 [kvm] __x64_sys_ioctl+0x3ed/0x9d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kvm_memslots() will be called by kvm_write_guest(), so we should take the srcu lock. Fixes: e880c6ea (KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs) Reviewed-by:Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1621339235-11131-4-git-send-email-wanpengli@tencent.com> Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Wanpeng Li authored
Commit 66570e96 (kvm: x86: only provide PV features if enabled in guest's CPUID) avoids to access pv tlb shootdown host side logic when this pv feature is not exposed to guest, however, kvm_steal_time.preempted not only leveraged by pv tlb shootdown logic but also mitigate the lock holder preemption issue. From guest's point of view, vCPU is always preempted since we lose the reset of kvm_steal_time.preempted before vmentry if pv tlb shootdown feature is not exposed. This patch fixes it by clearing kvm_steal_time.preempted before vmentry. Fixes: 66570e96 (kvm: x86: only provide PV features if enabled in guest's CPUID) Reviewed-by:
-
Wanpeng Li authored
In case of under-committed scenarios, vCPUs can be scheduled easily; kvm_vcpu_yield_to adds extra overhead, and it is also common to see when vcpu->ready is true but yield later failing due to p->state is TASK_RUNNING. Let's bail out in such scenarios by checking the length of current cpu runqueue, which can be treated as a hint of under-committed instead of guarantee of accuracy. 30%+ of directed-yield attempts can now avoid the expensive lookups in kvm_sched_yield() in an under-committed scenario. Signed-off-by:
-
Wanpeng Li authored
This is inspired by commit 262de410 (kvm: exit halt polling on need_resched() as well). Due to PPC implements an arch specific halt polling logic, we have to the need_resched() check there as well. This patch adds a helper function that can be shared between book3s and generic halt-polling loops. Reviewed-by:
David Matlack <dmatlack@google.com> Reviewed-by:
Venkatesh Srinivas <venkateshs@chromium.org> Cc: Ben Segall <bsegall@google.com> Cc: Venkatesh Srinivas <venkateshs@chromium.org> Cc: Jim Mattson <jmattson@google.com> Cc: David Matlack <dmatlack@google.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by:
-
- 24 May, 2021 3 commits
-
-
Paolo Bonzini authored
Make it consistent with kvm_intel.enable_apicv. Suggested-by:
-
Vitaly Kuznetsov authored
CONFIG_X86_LOCAL_APIC is always on when CONFIG_KVM (on x86) since commit e42eef4b ("KVM: add X86_LOCAL_APIC dependency"). Suggested-by:
-
Vitaly Kuznetsov authored
AVIC dependency on CONFIG_X86_LOCAL_APIC is dead code since commit e42eef4b ("KVM: add X86_LOCAL_APIC dependency"). Suggested-by:
-
- 17 May, 2021 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.13, take #1 - Fix regression with irqbypass not restarting the guest on failed connect - Fix regression with debug register decoding resulting in overlapping access - Commit exception state on exit to usrspace - Fix the MMU notifier return values - Add missing 'static' qualifiers in the new host stage-2 code
-
- 15 May, 2021 7 commits
-
-
Marc Zyngier authored
Commit 03fdfb26 ("KVM: arm64: Don't write junk to sysregs on reset") flipped the register number to 0 for all the debug registers in the sysreg table, hereby indicating that these registers live in a separate shadow structure. However, the author of this patch failed to realise that all the accessors are using that particular index instead of the register encoding, resulting in all the registers hitting index 0. Not quite a valid implementation of the architecture... Address the issue by fixing all the accessors to use the CRm field of the encoding, which contains the debug register index. Fixes: 03fdfb26 ("KVM: arm64: Don't write junk to sysregs on reset") Reported-by:
Ricardo Koller <ricarkol@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
-
Marc Zyngier authored
KVM currently updates PC (and the corresponding exception state) using a two phase approach: first by setting a set of flags, then by converting these flags into a state update when the vcpu is about to enter the guest. However, this creates a disconnect with userspace if the vcpu thread returns there with any exception/PC flag set. In this case, the exposed context is wrong, as userspace doesn't have access to these flags (they aren't architectural). It also means that these flags are preserved across a reset, which isn't expected. To solve this problem, force an explicit synchronisation of the exception state on vcpu exit to userspace. As an optimisation for nVHE systems, only perform this when there is something pending. Reported-by:
Zenghui Yu <yuzenghui@huawei.com> Reviewed-by:
Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by:
-
Marc Zyngier authored
In order to make it easy to call __adjust_pc() from the EL1 code (in the case of nVHE), rename it to __kvm_adjust_pc() and move it out of line. No expected functional change. Reviewed-by:
-
Quentin Perret authored
The host stage-2 memory pools are not used outside of mem_protect.c, mark them static. Fixes: 1025c8c0 ("KVM: arm64: Wrap the host with a stage 2") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Quentin Perret <qperret@google.com> Signed-off-by:
-
Quentin Perret authored
It is not used outside of setup.c, mark it static. Fixes:f320bc74 ("KVM: arm64: Prepare the creation of s1 mappings at EL2") Reported-by:
-
kernel test robot authored
arch/arm64/kvm/mmu.c:1114:9-10: WARNING: return of 0/1 in function 'kvm_age_gfn' with return type bool arch/arm64/kvm/mmu.c:1084:9-10: WARNING: return of 0/1 in function 'kvm_set_spte_gfn' with return type bool arch/arm64/kvm/mmu.c:1127:9-10: WARNING: return of 0/1 in function 'kvm_test_age_gfn' with return type bool arch/arm64/kvm/mmu.c:1070:9-10: WARNING: return of 0/1 in function 'kvm_unmap_gfn_range' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: cd4c7183 ("KVM: arm64: Convert to the gfn-based MMU notifier callbacks") Reported-by:
-
Zhu Lingshan authored
This reverts commit a979a6aa. The reverted commit may cause VM freeze on arm64 with GICv4, where stopping a consumer is implemented by suspending the VM. Should the connect fail, the VM will not be resumed, which is a bit of a problem. It also erroneously calls the producer destructor unconditionally, which is unexpected. Reported-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Zhu Lingshan <lingshan.zhu@intel.com> [maz: tags and cc-stable, commit message update] Signed-off-by:
-
- 09 May, 2021 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Turns out the bio max size change still has issues, so let's get it reverted for 5.13-rc1. We'll shake out the issues there and defer it to 5.14 instead" * tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block: Revert "bio: limit bio max size"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small SMB3 chmultichannel related changesets (also for stable) from the SMB3 test event this week. The other fixes are still in review/testing" * tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6: smb3: if max_channels set to more than one channel request multichannel smb3: do not attempt multichannel to server which does not support it smb3: when mounting with multichannel include it in requested capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent PSI state corruption when schedule() races with cgroup move. A recent commit combined two PSI callbacks to reduce the number of cgroup tree updates, but missed that schedule() can drop rq::lock for load balancing, which opens the race window for cgroup_move_task() which then observes half updated state. The fix is to solely use task::ps_flags instead of looking at the potentially mismatching scheduler state - Prevent an out-of-bounds access in uclamp caused bu a rounding division which can lead to an off-by-one error exceeding the buckets array size. - Prevent unfairness caused by missing load decay when a task is attached to a cfs runqueue. The old load of the task was attached to the runqueue and never removed. Fix it by enforcing the load update through the hierarchy for unthrottled run queue instances. - A documentation fix fot the 'sched_verbose' command line option" * tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unfairness caused by missing load decay sched: Fix out-of-bound access in uclamp psi: Fix psi state corruption when schedule() races with cgroup move sched,doc: sched_debug_verbose cmdline should be sched_verbose -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of locking related fixes and updates: - Two fixes for the futex syscall related to the timeout handling. FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and because it's not set the time namespace adjustment for clock MONOTONIC is applied wrongly. FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its always a relative timeout. - Cleanups in the futex syscall entry points which became obvious when the two timeout handling bugs were fixed. - Cleanup of queued_write_lock_slowpath() as suggested by Linus - Fixup of the smp_call_function_single_async() prototype" * tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Make syscall entry points less convoluted futex: Get rid of the val2 conditional dance futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") locking/qrwlock: Cleanup queued_write_lock_slowpath() smp: Fix smp_call_function_single_async prototype -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Borislav Petkov: "Handle power-gating of AMD IOMMU perf counters properly when they are used" * tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of things accumulated for x86 in the last two weeks: - Fix guest vtime accounting so that ticks happening while the guest is running can also be accounted to it. Along with a consolidation to the guest-specific context tracking helpers. - Provide for the host NMI handler running after a VMX VMEXIT to be able to run on the kernel stack correctly. - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant - real hw supports both) - A code generation improvement to TASK_SIZE_MAX through the use of alternatives - The usual misc and related cleanups and improvements" * tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: x86: Consolidate guest enter/exit logic to common helpers context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain context_tracking: Consolidate guest enter/exit wrappers sched/vtime: Move guest enter/exit vtime accounting to vtime.h sched/vtime: Move vtime accounting external declarations above inlines KVM: x86: Defer vtime accounting 'til after IRQ handling context_tracking: Move guest exit vtime accounting to separate helpers context_tracking: Move guest exit context tracking to separate helpers KVM/VMX: Invoke NMI non-IST entry instead of IST entry x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported x86/resctrl: Fix init const confusion x86: Delete UD0, UD1 traces x86/smpboot: Remove duplicate includes x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant -
Jens Axboe authored
This reverts commit cd2c7545. Alex reports that the commit causes corruption with LUKS on ext4. Revert it for now so that this can be investigated properly. Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 08 May, 2021 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid over-allocating the kernel's mapping on !MMU systems, which could lead to up to 2MiB of lost memory - The SiFive address extension errata only manifest on rv64, they are now disabled on rv32 where they are unnecessary - A pair of late-landing cleanups * tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove unused handle_exception symbol riscv: Consistify protect_kernel_linear_mapping_text_rodata() use riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y riscv: Only extend kernel reservation if mapped read-only
-
Linus Torvalds authored
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes in various drivers (qla2xxx, ufs, scsi_debug, lpfc) one doc fix and a fairly large update to the fnic driver to remove the open coded iteration functions in favour of the scsi provided ones" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Use scsi_host_busy_iter() to traverse commands scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io() scsi: scsi_debug: Fix cmd_per_lun, set to max_queue scsi: ufs: core: Narrow down fast path in system suspend path scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend scsi: ufs: core: Do not put UFS power into LPM if link is broken scsi: qla2xxx: Prevent PRLI in target mode scsi: qla2xxx: Add marginal path handling support scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found scsi: ufs: core: Fix a typo in ufs-sysfs.c scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command scsi: lpfc: Fix DMA virtual address ptr assignment in bsg scsi: lpfc: Fix illegal memory access on Abort IOCBs scsi: blk-mq: Fix build warning when making htmldocs
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - Convert sh and sparc to use generic shell scripts to generate the syscall headers - refactor .gitignore files - Update kernel/config_data.gz only when the content of the .config is really changed, which avoids the unneeded re-link of vmlinux - move "remove stale files" workarounds to scripts/remove-stale-files - suppress unused-but-set-variable warnings by default for Clang as well - fix locale setting LANG=C to LC_ALL=C - improve 'make distclean' - always keep intermediate objects from scripts/link-vmlinux.sh - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained - misc cleanups * tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> kbuild: Don't remove link-vmlinux temporary files on exit/signal kbuild: remove the unneeded comments for external module builds kbuild: make distclean remove tag files in sub-directories kbuild: make distclean work against $(objtree) instead of $(srctree) kbuild: refactor modname-multi by using suffix-search kbuild: refactor fdtoverlay rule kbuild: parameterize the .o part of suffix-search arch: use cross_compiling to check whether it is a cross build or not kbuild: remove ARCH=sh64 support from top Makefile .gitignore: prefix local generated files with a slash kbuild: replace LANG=C with LC_ALL=C Makefile: Move -Wno-unused-but-set-variable out of GCC only block kbuild: add a script to remove stale generated files kbuild: update config_data.gz only when the content of .config is changed .gitignore: ignore only top-level modules.builtin .gitignore: move tags and TAGS close to other tag files kernel/.gitgnore: remove stale timeconst.h and hz.bc usr/include: refactor .gitignore genksyms: fix stale comment ...
-
Steve French authored
Mounting with "multichannel" is obviously implied if user requested more than one channel on mount (ie mount parm max_channels>1). Currently both have to be specified. Fix that so that if max_channels is greater than 1 on mount, enable multichannel rather than silently falling back to non-multichannel. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-By:
Tom Talpey <tom@talpey.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by:
Shyam Prasad N <sprasad@microsoft.com>
-
Steve French authored
We were ignoring CAP_MULTI_CHANNEL in the server response - if the server doesn't support multichannel we should not be attempting it. See MS-SMB2 section 3.2.5.2 Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates and fixes from Michael Ellerman: "A bit of a mixture of things, tying up some loose ends. There's the removal of the nvlink code, which dependend on a commit in the vfio tree. Then the enablement of huge vmalloc which was in next for a few weeks but got dropped due to conflicts. And there's also a few fixes. Summary: - Remove the nvlink support now that it's only user has been removed. - Enable huge vmalloc mappings for Radix MMU (P9). - Fix KVM conversion to gfn-based MMU notifier callbacks. - Fix a kexec/kdump crash with hot plugged CPUs. - Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR. - Restore alphabetic order of the selects under CONFIG_PPC. Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin, Sandipan Das, and Sourabh Jain" * tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR powerpc/powernv/memtrace: Fix dcache flushing powerpc/kexec_file: Use current CPU info while setting up FDT powerpc/64s/radix: Enable huge vmalloc mappings powerpc/powernv: remove the nvlink support
-
Steve French authored
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to advertise CAP_MULTICHANNEL capability when establishing multiple channels has been requested by the user doing the mount. See MS-SMB2 sections 2.2.3 and 3.2.5.2 Without setting it there is some risk that multichannel could fail if the server interpreted the field strictly. Reviewed-By:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc1, including fixes from bpf, can and netfilter trees. Self-contained fixes, nothing risky. Current release - new code bugs: - dsa: ksz: fix a few bugs found by static-checker in the new driver - stmmac: fix frame preemption handshake not triggering after interface restart Previous releases - regressions: - make nla_strcmp handle more then one trailing null character - fix stack OOB reads while fragmenting IPv4 packets in openvswitch and net/sched - sctp: do asoc update earlier in sctp_sf_do_dupcook_a - sctp: delay auto_asconf init until binding the first addr - stmmac: clear receive all(RA) bit when promiscuous mode is off - can: mcp251x: fix resume from sleep before interface was brought up Previous releases - always broken: - bpf: fix leakage of uninitialized bpf stack under speculation - bpf: fix masking negation logic upon negative dst register - netfilter: don't assume that skb_header_pointer() will never fail - only allow init netns to set default tcp cong to a restricted algo - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid false positive errors - ethtool: fix missing NLM_F_MULTI flag when dumping - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b - bridge: fix NULL-deref caused by a races between assigning rx_handler_data and setting the IFF_BRIDGE_PORT bit Latecomer: - seg6: add counters support for SRv6 Behaviors" * tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) atm: firestream: Use fallthrough pseudo-keyword net: stmmac: Do not enable RX FIFO overflow interrupts mptcp: fix splat when closing unaccepted socket i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() tcp: Specify cmsgbuf is user pointer for receive zerocopy. mlxsw: spectrum_mr: Update egress RIF list before route's action net: ipa: fix inter-EE IRQ register definitions can: m_can: m_can_tx_work_queue(): fix tx_skb race condition can: mcp251x: fix resume from sleep before interface was brought up can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check ... -
Masahiro Yamada authored
<linux/kconfig.h> is included from all the kernel-space source files, including C, assembly, linker scripts. It is intended to contain a minimal set of macros to evaluate CONFIG options. IF_ENABLED() is an intruder here because (x ? y : z) is C code, which should not be included from assembly files or linker scripts. Also, <linux/kconfig.h> is no longer self-contained because NULL is defined in <linux/stddef.h>. Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF() takes the general boolean expression instead of a CONFIG option so that it fits better in <linux/kernel.h>. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org>
-
Michael Ellerman authored
Merge master back into next, this allows us to resolve some conflicts in arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so that they are in alphabetical order again.
-
- 07 May, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Add SECMARK revision 1 to fix incorrect layout that prevents from remove rule with this target, from Phil Sutter. 2) Fix pernet exit path spat in arptables, from Florian Westphal. 3) Missing rcu_read_unlock() for unknown nfnetlink callbacks, reported by syzbot, from Eric Dumazet. 4) Missing check for skb_header_pointer() NULL pointer in nfnetlink_osf. 5) Remove BUG_ON() after skb_header_pointer() from packet path in several conntrack helper and the TCP tracker. 6) Fix memleak in the new object error path of userdata. 7) Avoid overflows in nft_hash_buckets(), reported by syzbot, also from Eric. 8) Avoid overflows in 32bit arches, from Eric. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check netfilter: nfnetlink: add a missing rcu_read_unlock() netfilter: arptables: use pernet ops struct during unregister netfilter: xt_SECMARK: add new revision to fix structure layout ==================== Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
