- 08 Jul, 2016 40 commits
-
-
Heiner Kallweit authored
Simplify interupt handling code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
Study states have never been used and are not needed. Remove them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
The definition of rawir includes the initialization already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
Simplify a few functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
Wake states have never been in use and now that we can set the wakeup sequence via sysfs there's in general no need for them. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
The registers defining wakeup sequence handling are set when the wakeup sequence is set via sysfs. There's no need to initialize them otherwise. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
There is a rudimentary ISR for handling interrupts generated by the wakeup part of the chip. Interrupts however have never been enabled in the wakeup part. Also, now that we can set the wakeup sequence via sysfs, there's in general no need to enable interrupts in the wakeup part. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Heiner Kallweit authored
To detect a rx fifo overrun it's checked whether the number of elements in the chip fifo exceeds the fifo size. This check can never return true and is wrong. Instead we should generate an interrupt if the fifo overruns. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Move statistics polling to read_status() in order to avoid use of kernel work. Also replace home made sign extension used for statistics with kernel sign_extend32(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Move statistics polling to read_status() in order to avoid use of kernel work. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
* remove some unneeded variable initialization * rename variables * use min() macro to calc max i2c xfer len * change bad firmware error code from EFAULT to EINVAL Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
There was some calculations where was kHz used in order to keep calculation withing 32-bit. Convert all to Hz and use 64-bit division helpers where needed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Simplify TS clock divider calculation and programming slightly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
DiSEqC message sending takes 13.5 ms per byte, which is 54 ms total when typical 4 byte message is sent. Don't hard-code time limit to 54 ms, but calculate it. Time limit is only used to determine when to start poll "DiSEqC Tx ready" status from the chip. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
No need to clear negative msb bits as those were dropped in any case when data is written to register. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Disable runtime unbind as driver does not support it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Antti Palosaari authored
Si2168-B40 firmware API has changed somewhere between 4.0-11 and 4.0-19 so that sleep will lose firmware upgrade from the chip. Due to that firmware re-upload is needed when newer firmwares are used. Rewrote firmware handling logic partly at the same. Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Fix sparse warnings: tw686x-video.c:148:29: warning: symbol 'memcpy_dma_ops' was not declared. Should it be static? tw686x-video.c:195:29: warning: symbol 'contig_dma_ops' was not declared. Should it be static? tw686x-video.c:361:29: warning: symbol 'sg_dma_ops' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Dragos Bogdan authored
The part can be reset by a low pulse on the RESET pin (i.e. a hardware reset) with a minimum width of 5 ms. It is recommended to wait 5 ms after the low pulse before an I2C write is performed to the part. For safety reasons, the delays will be between 5 and 10 ms. The RESET pin can be tied high, so the GPIO is optional. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Amitoj Kaur Chawla authored
vzalloc combines vmalloc and memset 0. The Coccinelle semantic patch used to make this change is as follows: @@ type T; T *d; expression e; statement S; @@ d = - vmalloc + vzalloc (...); if (!d) S - memset(d, 0, sizeof(T)); Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arnd Bergmann authored
The dvb demuxer code uses a 'struct timespec' to pass a timeout as absolute time. This will cause problems on 32-bit architectures in 2038 when time_t overflows, and it is racy with a concurrent settimeofday() call. This patch changes the code to use ktime_get() instead, using the monotonic time base to avoid both the race and the overflow. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Alexander Shiyan authored
Commit 39b4da71 ("reset: use ENOTSUPP instead of ENOSYS") changed return value for reset controller if it missing. This patch changes the CODA driver to handle this value. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Guennadi Liakhovetski authored
A copy paste error created that format with the same one-line description as Y8I and Y12I, whereas Z16 is quite different from them both. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ricardo Ribalda authored
The comment was referencing the wrong function. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ricardo Ribalda authored
After all the code refactoring, vb2_internal_qbuf is only called by vb2_qbuf. Since the function it is very simple, there is no need to have two functions. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ricardo Ribalda authored
After all the code refactoring, vb2_internal_dqbuf is only called by vb2_dqbuf. Since the function it is very simple, there is no need to have two functions. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Ricardo Ribalda authored
According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF: V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared ... Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This can be tested with vivid and dev_debug: [257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3, type=vid-cap, flags=0x00002004, field=none, sequence=163, memory=userptr, bytesused=460800, offset/userptr=0x344b000, length=460800 This patch forces FLAG_DONE to 0 after calling DQBUF. Reported-by: Dimitrios Katsaros <patcherwork@gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Don't fill in the format description. This is now done in the V4L2 core to ensure consistent descriptions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Lubomir Rintel authored
Patrick Keshishian improved the explanation of the protocol when porting the driver to OpenBSD. Given it's a reverse engineering one and there's no documetnation it might be helpful to whoever hacks on the driver. Signed-off-by: Patrick Keshishian <sidster@boxsoft.com> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Lubomir Rintel authored
OpenBSD would like to reuse some code but consider the licensing not clear enough. Let's clarify it a bit so that it suits their conventions: 1.) Keep the "extra text" away from the copyright statement and the rights grant. 2.) Add the warranty disclaimer -- it should not be legally required, nevertheless the clause 1. of the rights grant refest to it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Federico Simoncelli <fsimonce@redhat.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Florian Echtler authored
Closing the V4L2 device sometimes triggers a kernel oops. Present patch fixes this. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.2 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Florian Echtler authored
The framerate sometimes drops below 60 Hz if the poll interval is too high. Lowering it to the minimum of 1 ms fixes this. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v4.2 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
The DMA buffer importing streaming I/O section mentions the memory type value that has to be set when calling the VIDIOC_REQBUFS ioctl but this isn't mentioned in neither the Memory Mapping nor User Pointer sections. A user can know the values by looking at the examples but it's better to explicitly mention in the documentation, and also makes all sections about streaming I/O methods more consistent. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Javier Martinez Canillas authored
Commit 4b9c1cb6 ("[media] Documentation: media: description of DMABUF importing in V4L2") documented the V4L2 dma-buf importing support but did not update the VIDIOC_REQBUFS description, so only the Memory Mapping and User Pointer I/O methods are mentioned. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Amitoj Kaur Chawla authored
Replace if condition and BUG() with a BUG_ON having the conditional expression of the if statement as argument. The Coccinelle semantic patch used to make this change is as follows: @@ expression E,f; @@ ( if (<+... f(...) ...+>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-