into intel.com:/home/lenb/src/linux-acpi-test-2.6.3

Call that function rather than evaluating its runtime address...

into intel.com:/home/lenb/src/linux-acpi-test-2.6.3

into intel.com:/home/lenb/src/linux-acpi-test-2.6.2

into intel.com:/home/lenb/src/linux-acpi-test-2.6.3

drivers/acpi/numa.c is IA64 only for now -- enforce it.
(and arch/i386/kernel/srat.c is i386 only for now)

Thanks to Nick's domain patch, the kernel worked fine with
smp_num_siblings = 4 (in simulation).

into home.osdl.org:/home/torvalds/v2.5/linux

Another fix from Dominik.

From Dominik..
The different P-4-M steppings have different "ebx" values. Analyze it
correctly to sort out Pentium-4-based Celerons.

Move the table verification to an extra function.

Remove the *ppst table, and remove an unneccessary forward-declaration

Keep *ppst local to the only function which needs it any longer.

Use the frequency_table for calculating the correct ->target state

Add a struct cpufreq_frequency_table, fill it with content, and use it for
->verify.

Reverting frequency changes on unloading is uncommon for cpufreq drivers
so let's remove this speciality.

into delerium.codemonkey.org.uk:/mnt/nfs/sepia/bar/src/kernel/2.6/trees/cpufreq

From: Hiroshi Miura <miura at da-cha.org>
                                                                                                        
I mistook a Geode chipset's register meanings. (-.-;
ON is not 'CPU is ON' but 'cpu modulation is ON' that is stops cpu.
                                                                                                               
this causes a bad freq setting.
                                                                                                               
This patch fixes this and minor bug that is,
                                                                                                               
        if (new_khz == stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
                local_irq_save(flags);
                cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
                                                                                                               
cpufreq_notify_transition() called after local_irq_save();
this makes not update cpu_khz.

The S_IFxxxx macros aren't bits to be tested, they
are values of the S_IFMT field.

This patch fixes the GPM cursor corruption people where seeing.

With 32 bit sector_t the block device size _in bytes_ is also cut to
32 bit in __set_size when the block device is mount (a filesystem
mounted). The argument should be cast to loff_t before expanding the
sector count to a byte count and calling i_size_write.

[Christophe Saout]

user program inclusion.

It's still wrong to include kernel headers from
user programs. Oh, well.

Ths "fix duplication of DMA {black,white}list in icside.c" patch broke it.

Noticed by Geert Uytterhoeven <geert@linux-m68k.org>.

From John McKell <mckellj@iomega.com>:

  This patch for scsi/sr.c and cdrom/cdrom.c persuades
  /proc/sys/dev/cdrom/info to report that connecting a drive via USB
  rather than ATAPI in fact does not make it able to write DVD-R.

  Without this patch, when sr0 and hdd are the same type of device
  connected via USB and ATAPI respectively, I see:

	$ cat /proc/sys/dev/cdrom/info:
	drive name:             sr1     sr0     hdd
	...
	Can write CD-R:         1       0       0
	Can write CD-RW:        1       0       0
	Can read DVD:           0       0       0
	Can write DVD-R:        1       1       0
	Can write DVD-RAM:      0       0       0
	Can read MRW:           0               0               0
	Can write MRW:          0               0               0

  With this patch applied, instead I see:

	$ cat /proc/sys/dev/cdrom/info:
	drive name:             sr1     sr0     hdd
	...
	Can write CD-R:         1       0       0
	Can write CD-RW:        1       0       0
	Can read DVD:           0       0       0
	Can write DVD-R:        0       0       0
	Can write DVD-RAM:      0       0       0
	Can read MRW:           0       0       0
	Can write MRW:          0       0       0

  The sr1 device in particular is an ordinary CD-RW that in fact cannot
  write DVD-R.

  While messing with this code, I also thought to tweak the /proc
  formatting to align the tabbed columns.

Here's a new version of the patch according to our discussion.

This allows the platform to add its own platform files to the
sysfs PCI device node through a "pcibios_add_platform_entries()"
call.

I added an empty pcibios_add_platform_entries() inline to all
archs that apparently have PCI and implemented the OF stuff for
ppc and ppc64. The name is still "devspec" for now, I doubt
it will conflict and that's consistent with our use of the
"devspec" name in other places.

From: Nathan Scott <nathans@sgi.com>,
      Andreas Gruenbacher <agruen@suse.de>

XFS regression tests tripped a couple of problems with the recent xattr fix.

When a size of 0 is passed in, the getxattr and listxattr syscalls return the
size that would be required for the value or list of names, without actually
returning the value.  The previous patch accidentally removed this test, and
so querying the required size broke.

From: "Art Haas" <ahaas@airmail.net>

The following patch removes the duplicated sysctl entries for 'soft-power'
and 'unaligned-trap' for HPPA users.  Immediately before these lines these
two entries exist in a C99-style format.

into home.osdl.org:/home/torvalds/v2.5/linux

into home.osdl.org:/home/torvalds/v2.5/linux

<Patch from Stephen Hemminger>
o [CORRECT] Better handling of shared IRQs in w83977af_ir driver.

<Patch from Stephen Hemminger>
o [CORRECT] Better handling of shared IRQs in via-ircc driver.

<Patch from Stephen Hemminger>
o [CORRECT] Better handling of shared IRQs in smsc-ircc2 driver.

<Patch from Stephen Hemminger>
o [CORRECT] Better handling of shared IRQs in ali-ircc driver.

<Patch from Stephen Hemminger>
o [CORRECT] Better handling of shared IRQs in nsc-ircc driver.