- 24 Aug, 2018 37 commits
-
-
Ray Jui authored
[ Upstream commit d0b8aed9 ] Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: fd5e5dd5 ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2") Signed-off-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ray Jui authored
[ Upstream commit e605c287 ] Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2 SoC. Fixes: 7ac674e8 ("arm64: dts: Add I2C nodes for NS2") Signed-off-by:
-
Scott Branden authored
[ Upstream commit 37c2bd81 ] Specify 1.8V EMMC capabilities for bcm958742t board to indicate support for UHS mode. Fixes: d4b4aba6 ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Scott Branden authored
[ Upstream commit eba92503 ] Specify 1.8V EMMC capabilities for bcm958742k board to indicate support for UHS mode. Fixes: d4b4aba6 ("arm64: dts: Initial DTS files for Broadcom Stingray SOC") Signed-off-by:
-
Ray Jui authored
[ Upstream commit 6cb1628a ] Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC Fixes: cd590b50 ("ARM: dts: enable PCIe support for Cygnus") Fixes: f6b88935 ("ARM: dts: Enable MSI support for Broadcom Cygnus") Signed-off-by:
-
Ray Jui authored
[ Upstream commit 71ca3409 ] Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom Cygnus SoC. Fixes: b51c05a3 ("ARM: dts: add I2C device nodes for Broadcom Cygnus") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit a0a8338e ] The i2c controller should be using IRQ_TYPE_LEVEL_HIGH, fix that. Fixes: bb097e3e ("ARM: dts: BCM5301X: Add I2C support to the DT") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 403fde64 ] The interrupts for the PCIe controllers should all be of type IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: d71eb941 ("ARM: dts: NSP: Add MSI support on PCI") Fixes: 52219902 ("ARM: dts: NSP: Fix PCIE DT issue") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit a3e32e78 ] The i2c controller should use IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Fixes: 0f9f27a3 ("ARM: dts: NSP: Add I2C support to the DT") Signed-off-by:
-
Fathi Boudra authored
[ Upstream commit d6a3e551 ] Unless the software synchronization objects (CONFIG_SW_SYNC) is enabled, the sync test will be skipped: TAP version 13 1..0 # Skipped: Sync framework not supported by kernel Add a config fragment file to be able to run "make kselftest-merge" to enable relevant configuration required in order to run the sync test. Signed-off-by:
Fathi Boudra <fathi.boudra@linaro.org> Link: https://lkml.org/lkml/2017/5/5/14Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit a4d75377 ] When vm test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 68581446 ] When zram test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit d7d5311d ] When user test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Add an explicit check for module presence and return skip code if module isn't present. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit c7db6ffb ] When sysctl test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Changed return code to kselftest skip code in skip error legs that check requirements and module probe test error leg. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 87815780 ] When static_keys test is skipped because of unmet dependencies and/or unsupported configuration, it exits with error which is treated as a fail by the Kselftest framework. This leads to false negative result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Added an explicit searches for test_static_key_base and test_static_keys modules and return skip code if they aren't found to differentiate between the failure to load the module condition and module not found condition. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit 856e7c4b ] When pstore_post_reboot test gets skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Signed-off-by:
-
Gao Feng authored
[ Upstream commit ad9852af ] The helper module would be unloaded after nf_conntrack_helper_unregister, so it may cause a possible panic caused by race. nf_ct_iterate_destroy(unhelp, me) reset the helper of conntrack as NULL, but maybe someone has gotten the helper pointer during this period. Then it would panic, when it accesses the helper and the module was unloaded. Take an example as following: CPU0 CPU1 ctnetlink_dump_helpinfo helper = rcu_dereference(help->helper); unhelp set helper as NULL unload helper module helper->to_nlattr(skb, ct); As above, the cpu0 tries to access the helper and its module is unloaded, then the panic happens. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9ce7bc03 ] It is a waste of memory to use a full "struct netns_sysctl_ipv6" while only one pointer is really used, considering netns_sysctl_ipv6 keeps growing. Also, since "struct netns_frags" has cache line alignment, it is better to move the frags_hdr pointer outside, otherwise we spend a full cache line for this pointer. This saves 192 bytes of memory per netns. Fixes: c038a767 ("ipv6: add a new namespace for nf_conntrack_reasm") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit 8195a655 ] On this system EC interrupt triggers constantly kicking devices out of low power states and thus blocking power management. The system also has a PCIe root port hosting Alpine Ridge Thunderbolt controller and it never gets a chance to go to D3cold because of this. Since the power button works the same regardless if EC interrupt is enabled or not during s2idle, add a quirk for this machine that sets ec_no_wakeup=true preventing spurious wakeups. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 896e5188 ] The clocks have already been explicitly disabled and put as part of remove() so the runtime suspend callback must not be run when balancing the runtime PM usage count before returning. Fixes: 16adc674 ("usb: dwc3: add generic OF glue layer") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Minas Harutyunyan authored
[ Upstream commit 1ffba905 ] In case of requests queue is empty reset EP target_frame to initial value. This allow restarting ISOC traffic in case when function driver queued requests with interruptions. Tested-by:
Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
-
Vincent Pelletier authored
[ Upstream commit d52e4d0c ] This bug happens only when the UDC needs to sleep during usb_ep_dequeue, as is the case for (at least) dwc3. [ 382.200896] BUG: scheduling while atomic: screen/1808/0x00000100 [ 382.207124] 4 locks held by screen/1808: [ 382.211266] #0: (rcu_callback){....}, at: [<c10b4ff0>] rcu_process_callbacks+0x260/0x440 [ 382.219949] #1: (rcu_read_lock_sched){....}, at: [<c1358ba0>] percpu_ref_switch_to_atomic_rcu+0xb0/0x130 [ 382.230034] #2: (&(&ctx->ctx_lock)->rlock){....}, at: [<c11f0c73>] free_ioctx_users+0x23/0xd0 [ 382.230096] #3: (&(&ffs->eps_lock)->rlock){....}, at: [<f81e7710>] ffs_aio_cancel+0x20/0x60 [usb_f_fs] [ 382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common [ 382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117 [ 382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 382.230425] Call Trace: [ 382.230438] <SOFTIRQ> [ 382.230466] dump_stack+0x47/0x62 [ 382.230498] __schedule_bug+0x61/0x80 [ 382.230522] __schedule+0x43/0x7a0 [ 382.230587] schedule+0x5f/0x70 [ 382.230625] dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3] [ 382.230669] ? do_wait_intr_irq+0x70/0x70 [ 382.230724] usb_ep_dequeue+0x19/0x90 [udc_core] [ 382.230770] ffs_aio_cancel+0x37/0x60 [usb_f_fs] [ 382.230798] kiocb_cancel+0x31/0x40 [ 382.230822] free_ioctx_users+0x4d/0xd0 [ 382.230858] percpu_ref_switch_to_atomic_rcu+0x10a/0x130 [ 382.230881] ? percpu_ref_exit+0x40/0x40 [ 382.230904] rcu_process_callbacks+0x2b3/0x440 [ 382.230965] __do_softirq+0xf8/0x26b [ 382.231011] ? __softirqentry_text_start+0x8/0x8 [ 382.231033] do_softirq_own_stack+0x22/0x30 [ 382.231042] </SOFTIRQ> [ 382.231071] irq_exit+0x45/0xc0 [ 382.231089] smp_apic_timer_interrupt+0x13c/0x150 [ 382.231118] apic_timer_interrupt+0x35/0x3c [ 382.231132] EIP: __copy_user_ll+0xe2/0xf0 [ 382.231142] EFLAGS: 00210293 CPU: 1 [ 382.231154] EAX: bfd4508c EBX: 00000004 ECX: 00000003 EDX: f3d8fe50 [ 382.231165] ESI: f3d8fe51 EDI: bfd4508d EBP: f3d8fe14 ESP: f3d8fe08 [ 382.231176] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 382.231265] core_sys_select+0x25f/0x320 [ 382.231346] ? __wake_up_common_lock+0x62/0x80 [ 382.231399] ? tty_ldisc_deref+0x13/0x20 [ 382.231438] ? ldsem_up_read+0x1b/0x40 [ 382.231459] ? tty_ldisc_deref+0x13/0x20 [ 382.231479] ? tty_write+0x29f/0x2e0 [ 382.231514] ? n_tty_ioctl+0xe0/0xe0 [ 382.231541] ? tty_write_unlock+0x30/0x30 [ 382.231566] ? __vfs_write+0x22/0x110 [ 382.231604] ? security_file_permission+0x2f/0xd0 [ 382.231635] ? rw_verify_area+0xac/0x120 [ 382.231677] ? vfs_write+0x103/0x180 [ 382.231711] SyS_select+0x87/0xc0 [ 382.231739] ? SyS_write+0x42/0x90 [ 382.231781] do_fast_syscall_32+0xd6/0x1a0 [ 382.231836] entry_SYSENTER_32+0x47/0x71 [ 382.231848] EIP: 0xb7f75b05 [ 382.231857] EFLAGS: 00000246 CPU: 1 [ 382.231868] EAX: ffffffda EBX: 00000400 ECX: bfd4508c EDX: bfd4510c [ 382.231878] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: bfd45020 [ 382.231889] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 382.232281] softirq: huh, entered softirq 9 RCU c10b4d90 with preempt_count 00000100, exited with 00000000? Tested-by:
Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by:
-
Heikki Krogerus authored
[ Upstream commit 00908693 ] PCI IDs for Intel IceLake. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 3637f12f ] Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Fixes: 03aa1262 ("soc: imx: Add GPCv2 power gating driver") Acked-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 91bb8f45 ] Commit cc66b303 ("hwmon: (nct6775) Rework temperature source and label handling") changed a loop limit from "data->temp_label_num - 1" to "32", as part of moving from a string array to a bit mask. This results in the following error, reported by UBSAN. UBSAN: Undefined behaviour in drivers/hwmon/nct6775.c:4179:27 shift exponent 32 is too large for 32-bit type 'long unsigned int' Similar to the original loop, the limit has to be one less than the number of bits. Fixes: cc66b303 ("hwmon: (nct6775) Rework temperature source and label handling") Reported-by:
Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de> Cc: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexey Brodkin authored
[ Upstream commit 74c11e30 ] GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default thus we don't see any problems during Linux kernel compilation. ----------------------------->8------------------------ arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [enabled] ----------------------------->8------------------------ But if we try to use so-called Elf32 toolchain with GCC configured for arc*-*-elf* then we'd see the following failure: ----------------------------->8------------------------ init/do_mounts.o: In function 'init_rootfs': do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o arc-elf32-ld: final link failed: Symbol needs debug section which does not exist make: *** [vmlinux] Error 1 ----------------------------->8------------------------ That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in Elf32 GCC: ----------------------------->8------------------------ arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [disabled] ----------------------------->8------------------------ Now to make it possible to use Elf32 toolchain for building Linux kernel we're explicitly add "-mmedium-calls" to CFLAGS. And since we add "-mmedium-calls" to the global CFLAGS there's no point in having per-file copies thus removing them. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Maciej Purski authored
[ Upstream commit 9378cecb ] Buffer overflow error should not occur, as mode_fixup() callback filters pixel clock value and it should never exceed 600000. However, current implementation is not obviously safe and relies on implementation of mode_fixup(). Make 'i' variable never reach unsafe value in order to avoid buffer overflow error. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: bf1722ca ("drm/bridge/sii8620: rewrite hdmi start sequence") Signed-off-by:
Maciej Purski <m.purski@samsung.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1511341718-6974-1-git-send-email-m.purski@samsung.comSigned-off-by:
-
Andrzej Hajda authored
[ Upstream commit 8e627a1b ] Function should constantly check if cable is connected and finish in finite time. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Christophe Jaillet authored
[ Upstream commit 3dc7c7ba ] Before returning -EPERM we should release some resources, as already done in the other error handling path of the function. Fixes: d8f9cc32 ("IB/mlx4: Mark user MR as writable if actual virtual memory is writable") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit 645a397d ] The documentation for the touchscreen-swapped-x-y property states that swapping is done after inverting if both are used. RMI4 did it the other way around, leading to inconsistent behavior with regard to other touchscreens. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Nick Dyer <nick@shmanahar.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit f7fa827f ] For events we provide specific error message we need to set error column index, PMU parser is missing that, adding it. Before: $ perf stat -e cycles,krava/cycles/ kill event syntax error: 'cycles,krava/cycles/' \___ Cannot find PMU `krava'. Missing kernel support? After: $ perf stat -e cycles,krava/cycles/ kill event syntax error: 'cycles,krava/cycles/' \___ Cannot find PMU `krava'. Missing kernel support? Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180606221513.11302-3-jolsa@kernel.orgSigned-off-by:
-
Dong Jia Shi authored
[ Upstream commit 2c861d89 ] If the device has not been registered, or there is work pending, we should reschedule a sch_event call again. Signed-off-by:
Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20180502072559.50691-1-bjsdjshi@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Viresh Kumar authored
[ Upstream commit ac62cc9d ] It should be "#cooling-cells" instead of "cooling-cells". Fix it. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Matthijs van Duin authored
commit 36ecc148 upstream. It was being ignored because the flags were not passed to fd allocation. Fixes: 54ebbfb1 ("tty: add TIOCGPTPEER ioctl") Signed-off-by:
Matthijs van Duin <matthijsvanduin@gmail.com> Acked-by:
Aleksa Sarai <asarai@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit b748f2de upstream. The edac_mem_types[] array misses a MEM_LRDDR4 entry, which leads to NULL pointer dereference when accessed via sysfs or such. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20180810141426.8918-1-tiwai@suse.de Fixes: 1e8096bb ("EDAC: Add LRDDR4 DRAM type") Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Gustavo A. R. Silva authored
commit de5372da upstream. info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/i915/gvt/kvmgt.c:1232 intel_vgpu_ioctl() warn: potential spectre issue 'vgpu->vdev.region' [r] Fix this by sanitizing info.index before indirectly using it to index vgpu->vdev.region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
Jeremy Cline authored
commit 1a5d5e5d upstream. 'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to index arrays which makes it a potential spectre gadget. Fix this by sanitizing the value assigned to 'ac->ac2_order'. This covers the following accesses found with the help of smatch: * fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential spectre issue 'grp->bb_counters' [w] (local cap) * fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue 'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap) * fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue 'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap) Suggested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
- 22 Aug, 2018 3 commits
-
-
Greg Kroah-Hartman authored
-
Hangbin Liu authored
[ Upstream commit a51c76b4 ] Fix tcf_unbind_filter missing in cls_matchall as this will trigger WARN_ON() in cbq_destroy_class(). Fixes: fd62d9f5 ("net/sched: matchall: Fix configuration race") Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 5e22002a ] It was possible to directly leak the kernel address where the isdn_dev structure pointer was stored. This is a kernel ASLR bypass for anyone with access to the ioctl. The code had been present since the beginning of git history, though this shouldn't ever be needed for normal operation, therefore remove it. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by:
-
