- 02 Aug, 2019 7 commits
-
-
Gao Xiang authored
Because #include "internal.h" is included in xattr.h Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Link: https://lore.kernel.org/r/20190731155752.210602-8-gaoxiang25@huawei.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gao Xiang authored
Tidy up relative order of variables / declarations in internal.h, move some local static functions out into other files and add tags at the end of #endif acrossing several lines. No logic change. Reviewed-by:
-
Gao Xiang authored
It was used for Linux backward compatibility, and no use for upstream kernel. Reviewed-by:
-
Gao Xiang authored
The main change is to reserve all checksums except for superblock, since it's more useful to do block-based verity for read-only fs. Some comments change as well, which is minor. Reviewed-by:
-
Gao Xiang authored
dummy functions erofs_{get,list}xattr should be inlined without xattr enabled. Signed-off-by:Yue Hu <zbestahu@gmail.com> [ Gao Xiang : this patch was "staging: erofs: remove needless dummy functions of erofs_{get,list}xattr. "] Reviewed-by:
-
Gao Xiang authored
Keep in line with erofs-outofstaging patchset as well, see https://lore.kernel.org/linux-fsdevel/20190725095658.155779-1-gaoxiang25@huawei.com/Reviewed-by:
-
Gao Xiang authored
- Use the correct style for all SPDX License Identifiers; - Get rid of the unnecessary license boilerplate; - Use "GPL-2.0-only" instead of "GPL-2.0" suggested-by Stephen. Reviewed-by:
-
- 01 Aug, 2019 4 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/hal/odm.c: In function 'odm_RSSIMonitorCheckCE': drivers/staging/rtl8723bs/hal/odm.c:1258:7: warning: variable 'FirstConnect' set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20190731140903.304-1-yuehaibing@huawei.comSigned-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs/core/rtw_cmd.c: In function rtw_cmd_thread: drivers/staging/rtl8723bs/core/rtw_cmd.c:405:16: warning: variable prspbuf set but not used [-Wunused-but-set-variable] drivers/staging/rtl8723bs/core/rtw_cmd.c: In function rtw_joinbss_cmd: drivers/staging/rtl8723bs/core/rtw_cmd.c:771:6: warning: variable auth set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Reported-by:
-
Navid Emamdoost authored
In rtl8192_init_priv_variable allocation for priv->pFirmware may fail, so a null check is necessary.priv->pFirmware is accessed later in rtl8192_adapter_start. I added the check and made appropriate changes to propagate the errno to the caller. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20190731141925.29268-1-navid.emamdoost@gmail.comSigned-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/staging/rtl8723bs//hal/odm_CfoTracking.c: In function 'odm_SetCrystalCap': drivers/staging/rtl8723bs//hal/odm_CfoTracking.c:14:7: warning: variable 'bEEPROMCheck' set but not used [-Wunused-but-set-variable] Reported-by:
-
- 31 Jul, 2019 3 commits
-
-
Colin Ian King authored
Variable rtstatus is being initialized with a value that is never read and rtstatus is being re-assigned a little later on. The assignment is redundant and hence can be removed. Also, make rtstatus a bool to match the function return type. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190731094736.28637-1-colin.king@canonical.comSigned-off-by:
-
Chris Chiu authored
The Realtek RTL8723BS only connects successfully at the very first time, then it always fails attempting to switch to another AP. No authentication/association observed from the air capture for each attempt due to the cfg80211 believes the device is still connected. Fix this by forcing to indicate the disconnection events during disconnection so the cfg80211_connect can connect to a different AP without problem. Signed-off-by:
Chris Chiu <chiu@endlessm.com> Link: https://lore.kernel.org/r/20190731103517.66903-1-chiu@endlessm.comSigned-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 8e7cb735. Bharath writes: Could you drop this patch from the staging-next tree? This is because John is making some changes to the put_user_page*() functions. He has submitted a patch recently removing put_user_page_dirty() function which is being used in this patch. This might break the kernel build if John's patch gets merged in. I ll submit a patch once the put_user_page*() apis are fixed. Reported-by:
Bharath Vedartham <linux.bhar@gmail.com> Signed-off-by:
-
- 30 Jul, 2019 26 commits
-
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by:Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-43-swboyd@chromium.orgSigned-off-by:
-
Ioana Ciornei authored
Add the .ndo_fdb_[add|del] callbacks so that FDB entries not associated with a master device still end up offloaded. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/1564416712-16946-6-git-send-email-ioana.ciornei@nxp.comSigned-off-by:
-
Ioana Ciornei authored
We do not want to offload FDB entries if not added by user as static entries. Check the added_by_user flag and break if not set. Signed-off-by:
-
Ioana Ciornei authored
Implement the .ndo_fdb_dump callback for the switch net devices. The list of all offloaded FDB entries is retrieved through the dpsw_fdb_dump() firmware call. Filter the entries by the switch port on which the callback was called and for each of them create a new neighbour message. Also remove the requirement from the TODO list. Signed-off-by:
-
Ioana Ciornei authored
Notify switchdev in case the FDB entry was successfully offloaded. This will help users to make the distinction between entries known to the HW switch and those that are held only on the software bridge. Signed-off-by:
-
Ioana Ciornei authored
The dpsw_cfg structure is only used when creating a new dpsw DPAA2 object. In the DPAA2 architecture, objects are created at boot time by the firmware or dynamically from userspace while drivers on the fsl-mc bus only configure those objects. Remove the structure since it's of no use. Signed-off-by:
-
Michael Straube authored
Use if(!x) instead of if(x == NULL). Reported by checkpatch. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20190726180448.2290-6-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
Add spaces around '-' and '*' to improve readability and follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Add spaces around '<<' and '>>' to improve readability and follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Add spaces around '|' to improve readability and follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Add spaces around '&' to improve readability and follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Add spaces around '+' to improve readability and follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Adham Abozaeid authored
manual sleep mode was used to put the wilc1000 chip in sleep while in disconnected state. This is taken care of in the firmware Signed-off-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Link: https://lore.kernel.org/r/20190725213125.2810-7-adham.abozaeid@microchip.comSigned-off-by:
-
Adham Abozaeid authored
Don't ignore power management if 2 interfaces are open Signed-off-by:
-
Adham Abozaeid authored
Don't override powersave state with respect to the open interfaces and let the firmware take care of when it's appropriate to do so Signed-off-by:
-
Adham Abozaeid authored
remove obtaining_ip from struct wilc_vif Signed-off-by:
-
Adham Abozaeid authored
during_ip_timer is not required after removing the code that disables powersave while the ip is being obtained. Its handler clear_during_ip is also removed Signed-off-by:
-
Adham Abozaeid authored
Driver registers an inetaddr notifier to disable powersave while the ip address is being obtained which should be controlled only by cfg80211. Signed-off-by:
-
Bharath Vedartham authored
For pages that were retained via get_user_pages*(), release those pages via the new put_user_page*() routines, instead of via put_page(). This is part a tree-wide conversion, as described in commit fc1d8e7c ("mm: introduce put_user_page*(), placeholder versions"). Cc: Ira Weiny <ira.weiny@intel.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matt Sickler <Matt.Sickler@daktronics.com> Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Signed-off-by:
-
Colin Ian King authored
Variable rtstatus is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Abhinav Jain authored
Added the identifier name in the function prototype definition. Signed-off-by:
Abhinav Jain <crazypsychild@gmail.com> Link: https://lore.kernel.org/r/20190726190146.10875-1-ubuntu@ip-172-31-129-142.ec2.internalSigned-off-by:
-
Michael Straube authored
Function hal_EfusePgCheckAvailableAddr() contains just a single if test. Remove the function and replace the call to it with the if test. Signed-off-by:
-
Christophe JAILLET authored
The driver is related to 'pcd8544'. However, 2 strings are about pdc8544 (c and d switched) Fix it. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20190725183856.17616-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Sebastian Andrzej Siewior authored
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use DEFINE_SPINLOCK() and spare the run time initialization Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190704153803.12739-5-bigeasy@linutronix.de Link: https://lore.kernel.org/r/alpine.DEB.2.21.1907261319100.1791@nanos.tec.linutronix.deSigned-off-by:
-
Jerry Lin authored
All uses of old GPIO API have been converted to new API. This item can be removed from TODO file. Signed-off-by:
Jerry Lin <wahahab11@gmail.com> Link: https://lore.kernel.org/r/20190729023544.GA25930@compute1Signed-off-by:
-
YueHaibing authored
Fix gcc used-but-set-variable warning: drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c: In function vchiq_release_internal: drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2827:16: warning: variable local_entity_uc set but not used [-Wunused-but-set-variable] drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2827:6: warning: variable local_uc set but not used [-Wunused-but-set-variable] Remove the unused variables 'local_entity_uc' and 'local_uc' Reported-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20190727013524.33168-1-yuehaibing@huawei.comSigned-off-by:
-
