- 03 Feb, 2023 35 commits
-
-
Krzysztof Kozlowski authored
lower-case hex is expected for unit addresses: adi,ltc2992.example.dts:22.24-38.15: Warning (i2c_bus_reg): /example-0/i2c/ltc2992@6F: I2C bus unit address format error, expected "6f" Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230118172237.349111-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Armin Wolf authored
The driver knows internally when a fan is not connected, but does not export this knowledge to userspace. Use the standard fanX_fault attributes to notify userspace if a fan is not connected. Tested on a Fujitsu DS3401-B1. Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230105225107.58308-4-W_Armin@gmx.deSigned-off-by:
-
Armin Wolf authored
Replace the nonstandard fanX_source attributes with the standardized pwmX_auto_channels_temp attributes and document the special behaviour associated with those attributes. Tested on a Fujitsu DS3401-B1. Signed-off-by:
-
Armin Wolf authored
Convert driver to use devm_hwmon_device_register_with_info() to reduce module size by ~30%. Tested on a Fujitsu DS3401-B1. Signed-off-by:
-
Frank Crawford authored
On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip (IT8792E) needs to be in configuration mode before accessing the first due to a bug in IT8792E which otherwise results in LPC bus access errors. This needs to be done before accessing the first Super-IO chip since the second chip may have been accessed prior to loading this driver. The problem is also reported to affect IT8795E, which is used on X299 boards and has the same chip ID as IT8792E (0x8733). It also appears to affect systems with IT8790E, which is used on some Z97X-Gaming boards as well as Z87X-OC, and other more recent Gigabyte boards. Signed-off-by:
Frank Crawford <frank@crawford.emu.id.au> Link: https://lore.kernel.org/r/20230104060926.619686-3-frank@crawford.emu.id.au [groeck: Made description pass checkpatch] Signed-off-by:
-
Frank Crawford authored
Allow for superio_enter to be called without requesting the muxed memory region, in particular for initialisation of the second chipset, which must be put into configuration mode, but without an associated call to leave configuration mode. Signed-off-by:
-
XU pengfei authored
Pointer variables of void * type do not require type cast. Signed-off-by:
XU pengfei <xupengfei@nfschina.com> Link: https://lore.kernel.org/r/20230111043605.3726-1-xupengfei@nfschina.comSigned-off-by:
-
Denis Pauk authored
Boards such as: "EX-B660M-V5 PRO D4", "PRIME B650-PLUS", "PRIME B650M-A", "PRIME B650M-A AX", "PRIME B650M-A II", "PRIME B650M-A WIFI", "PRIME B650M-A WIFI II", "PRIME B660M-A D4", "PRIME B660M-A WIFI D4", "PRIME X670-P", "PRIME X670-P WIFI", "PRIME X670E-PRO WIFI", "Pro B660M-C-D4", "ProArt B660-CREATOR D4", "ProArt X670E-CREATOR WIFI", "ROG CROSSHAIR X670E EXTREME", "ROG CROSSHAIR X670E GENE", "ROG CROSSHAIR X670E HERO", "ROG MAXIMUS XIII EXTREME GLACIAL", "ROG MAXIMUS Z690 EXTREME", "ROG MAXIMUS Z690 EXTREME GLACIAL", "ROG STRIX B650-A GAMING WIFI", "ROG STRIX B650E-E GAMING WIFI", "ROG STRIX B650E-F GAMING WIFI", "ROG STRIX B650E-I GAMING WIFI", "ROG STRIX B660-A GAMING WIFI D4", "ROG STRIX B660-F GAMING WIFI", "ROG STRIX B660-G GAMING WIFI", "ROG STRIX B660-I GAMING WIFI", "ROG STRIX X670E-A GAMING WIFI", "ROG STRIX X670E-E GAMING WIFI", "ROG STRIX X670E-F GAMING WIFI", "ROG STRIX X670E-I GAMING WIFI", "ROG STRIX Z590-A GAMING WIFI II", "ROG STRIX Z690-A GAMING WIFI D4", "TUF GAMING B650-PLUS", "TUF GAMING B650-PLUS WIFI", "TUF GAMING B650M-PLUS", "TUF GAMING B650M-PLUS WIFI", "TUF GAMING B660M-PLUS WIFI", "TUF GAMING X670E-PLUS", "TUF GAMING X670E-PLUS WIFI", "TUF GAMING Z590-PLUS WIFI", have got a NCT6799D chip, but by default there's no use of it because of resource conflict with WMI method. This commit adds such boards to the monitoring list with new ACPI device UID. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807Signed-off-by:
Denis Pauk <pauk.denis@gmail.com> Co-developed-by:
Ahmad Khalifa <ahmad@khalifa.ws> Signed-off-by:
Jeroen Beerstra <jeroen@beerstra.org> Tested-by:
Slawomir Stepien <sst@poczta.fm> Link: https://lore.kernel.org/r/20230111212241.7456-2-pauk.denis@gmail.comSigned-off-by:
-
Denis Pauk authored
New ASUS B650/B660/X670 boards firmware have not exposed WMI monitoring GUID and entrypoint method WMBD could be implemented for different device UID. Implement the direct call to entrypoint method for monitoring the device UID of B550/X570 boards. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807Signed-off-by:
-
Randy Dunlap authored
Use the correct function name in kernel-doc comments to prevent these warnings: drivers/hwmon/hih6130.c:164: warning: expecting prototype for hih6130_show_temperature(). Prototype was for hih6130_temperature_show() instead drivers/hwmon/hih6130.c:185: warning: expecting prototype for hih6130_show_humidity(). Prototype was for hih6130_humidity_show() instead Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20230113064549.21289-1-rdunlap@infradead.orgSigned-off-by:
-
Randy Dunlap authored
Use the correct function names in kernel-doc comments to prevent these warnings: drivers/hwmon/sht15.c:682: warning: expecting prototype for sht15_show_status(). Prototype was for sht15_status_show() instead drivers/hwmon/sht15.c:705: warning: expecting prototype for sht15_store_heater(). Prototype was for sht15_status_store() instead drivers/hwmon/sht15.c:738: warning: expecting prototype for sht15_show_temp(). Prototype was for sht15_temp_show() instead drivers/hwmon/sht15.c:760: warning: expecting prototype for sht15_show_humidity(). Prototype was for sht15_humidity_show() instead drivers/hwmon/sht21.c:128: warning: expecting prototype for sht21_show_temperature(). Prototype was for sht21_temperature_show() instead drivers/hwmon/sht21.c:149: warning: expecting prototype for sht21_show_humidity(). Prototype was for sht21_humidity_show() instead Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings: drivers/hwmon/emc2305.c:62: warning: Cannot understand * @cdev: cooling device; on line 62 - I thought it was a doc line drivers/hwmon/emc2305.c:89: warning: Cannot understand * @client: i2c client; on line 89 - I thought it was a doc line and drop ';' at end of each struct member line. Signed-off-by:
-
Nick Hawkins authored
Add the gxp-fan-ctrl.c and gxp-fan-ctrl.rst in hwmon driver/documentation. Signed-off-by:
Nick Hawkins <nick.hawkins@hpe.com> Reviewed-by:
Guenter Roek <linux@roek-us.net> Link: https://lore.kernel.org/r/20230103203654.59322-6-nick.hawkins@hpe.comSigned-off-by:
-
Nick Hawkins authored
Create documentation for the binding to support control of the fans on HPE platforms. Signed-off-by:
-
Nick Hawkins authored
The GXP SoC can support up to 16 fans through the interface provided by the CPLD. The current support is limited to 8 fans. The fans speeds are controlled via 8 different PWMs which can vary in value from 0-255. The fans are also capable of reporting if they have failed to the CPLD which in turn reports the status to the GXP SoC. Signed-off-by:
-
Robin Murphy authored
Coretemp's platform driver is unconventional. All the real work is done globally by the initcall and CPU hotplug notifiers, while the "driver" effectively just wraps an allocation and the registration of the hwmon interface in a long-winded round-trip through the driver core. The whole logic of dynamically creating and destroying platform devices to bring the interfaces up and down is error prone, since it assumes platform_device_add() will synchronously bind the driver and set drvdata before it returns, thus results in a NULL dereference if drivers_autoprobe is turned off for the platform bus. Furthermore, the unusual approach of doing that from within a CPU hotplug notifier, already commented in the code that it deadlocks suspend, also causes lockdep issues for other drivers or subsystems which may want to legitimately register a CPU hotplug notifier from a platform bus notifier. All of these issues can be solved by ripping this unusual behaviour out completely, simply tying the platform devices to the lifetime of the module itself, and directly managing the hwmon interfaces from the hotplug notifiers. There is a slight user-visible change in that /sys/bus/platform/drivers/coretemp will no longer appear, and /sys/devices/platform/coretemp.n will remain present if package n is hotplugged off, but hwmon users should really only be looking for the presence of the hwmon interfaces, whose behaviour remains unchanged. Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/ Link: https://gitlab.freedesktop.org/drm/intel/issues/6641Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.comSigned-off-by:
-
Aleksa Savic authored
Add support for reading four calculated virtual temp sensors on the Aquacomputer Aquaero. Values of these sensors are calculated on the device itself based on what the user configured in the official software. Configuring these sensors is not currently reverse engineered. Signed-off-by:
Aleksa Savic <savicaleksa83@gmail.com> Link: https://lore.kernel.org/r/20230101190056.1357124-1-savicaleksa83@gmail.comSigned-off-by:
-
Yang Li authored
Make the description of @aht10_data to @data in aht10_read_values() and remove @client in aht10_init() to clear the below warnings: drivers/hwmon/aht10.c:87: warning: Excess function parameter 'client' description in 'aht10_init' drivers/hwmon/aht10.c:131: warning: Function parameter or member 'data' not described in 'aht10_read_values' drivers/hwmon/aht10.c:131: warning: Excess function parameter 'aht10_data' description in 'aht10_read_values' Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3543Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20221223081056.88345-1-yang.lee@linux.alibaba.comSigned-off-by:
-
Armin Wolf authored
Use devm_watchdog_register_device() to let devres take care of unregistering the watchdog at device removal. Remove the now pointless fts_remove() function. Tested on a Fujitsu DS3401-B1. Signed-off-by:
-
Derek J. Clark authored
Add support for the AYANEO AIR and AYANEO AIR Pro models of handheld devices. These devices use the same EC registers and logic as the One X Player mini AMD. Previous AYANEO models are not supported as they use a different EC and do not have the necessary fan speed write enable and setting registers. The driver is tested on AYANEO AIR while AIR Pro model EC functionality and DMI data were verified using command line tools by another user. Add: - AYANEO AIR (AMD 5560U) - AYANEO AIR Pro (AMD 5560U) - AYANEO AIR Pro (AMD 5825U) While at it, fix spelling error (appart -> apart). Link: https://lore.kernel.org/r/20221229025609.147482-1-derekjohn.clark@gmail.comSigned-off-by:
Derek J. Clark <derekjohn.clark@gmail.com> [groeck: Sanitize commit description] Signed-off-by:
-
Leonard Anderweit authored
Add support for reading sensors of the Aquacomputer Aquaero 5/6 fan controllers. These fan controllers supports 4 fans, 8 physical temperature sensors, 8 virtual temperature sensors and 2 flow sensors. Temperature and flow sensor reading implemented by Aleksa Savic [1] [2] [3]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/31 [2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/51 [3] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/55 Originally-from: Aleksa Savic <savicaleksa83@gmail.com> Signed-off-by:
Leonard Anderweit <leonard.anderweit@gmail.com> Link: https://lore.kernel.org/r/20221218113131.3752-7-leonard.anderweit@gmail.comSigned-off-by:
-
Leonard Anderweit authored
Make fan sensor offsets u16 as u8 is insufficient for upcoming devices. Signed-off-by:
-
Leonard Anderweit authored
Add device dependent serial number and firmware offsets to support devices with different offsets. All currently supported devices share the same offsets. Implemented by Aleksa Savic [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/31/commits/14c3acf78b17397edb5dd356e6f5943a9996a1f9 Originally-from: Aleksa Savic <savicaleksa83@gmail.com> Signed-off-by:
-
Leonard Anderweit authored
Introduce structure for per device fan sensor offsets. This allows reading fan sensors in aqc_raw_event() from devices which use a different sensor layout in their status HID report. Currently only one version is implemented as all supported devices use the same structure. Signed-off-by:
-
Leonard Anderweit authored
Read flow sensors the same way for all devices instead of in special cases. Implemented by Aleksa Savic [1]. [1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/commit/1c10912c5fdc8287d88378bcf1ef14d596f29462 Originally-from: Aleksa Savic <savicaleksa83@gmail.com> Signed-off-by:
-
Leonard Anderweit authored
Rename AQC_TEMP_SENSOR_SIZE to AQC_SENSOR_SIZE to use with other sensor types. Signed-off-by:
-
Saravanan Sekar authored
Update the MAINTAINERS file to include the path for the MPQ7932 Signed-off-by:
Saravanan Sekar <saravanan@linumiz.com> Link: https://lore.kernel.org/r/20221207173716.123223-5-saravanan@linumiz.comSigned-off-by:
-
Saravanan Sekar authored
The MPQ7932 is a power management IC designed to operate from 5V buses to power a variety of Advanced driver-assistance system SOCs. Six integrated buck converters with hardware monitoring capability powers a variety of target rails configurable over PMBus interface. Signed-off-by:
-
Saravanan Sekar authored
Some regulator operates in a range of voltage which should not allow below the lower threshold. Signed-off-by:
-
Nick Hawkins authored
Document existing fanY_fault attribute. Signed-off-by:
-
Marcelo Tosatti authored
The coretemp driver uses rdmsr_on_cpu calls to read MSR_IA32_PACKAGE_THERM_STATUS/MSR_IA32_THERM_STATUS registers, which contain information about current core temperature. For certain low latency applications, the RDMSR interruption exceeds the applications requirements. So do not create core files in sysfs, for CPUs which have isolation and nohz_full enabled. Temperature information from the housekeeping cores should be sufficient to infer die temperature. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Link: https://lore.kernel.org/r/Y5zT6B1mY9/pnwJV@tpadSigned-off-by:
-
Herman Fries authored
Adding support for new device id 1e71:2019 NZXT NZXT RGB & Fan Controller Signed-off-by:
Herman Fries <baracoder@googlemail.com> Link: https://lore.kernel.org/r/20221214194627.135692-1-baracoder@googlemail.comSigned-off-by:
-
Joaquín Ignacio Aramendía authored
As stated in the mainling list[1] and by checkpatch output, the file modes for is_visible_func should be returned explicitly. Change that in the documentation to avoid confusion. [1]https://lore.kernel.org/linux-hwmon/506a6e7f-4566-2dcf-37f3-0f41f4ce983b@roeck-us.net/Signed-off-by:
Joaquín Ignacio Aramendía <samsagax@gmail.com> Link: https://lore.kernel.org/r/20221212141245.52935-1-samsagax@gmail.comSigned-off-by:
-
Eugene Shalygin authored
Add missing mutex path for ProArt X570-CREATOR WIFI. Fixes: de8fbac5 (hwmon: (asus-ec-sensors) implement locking via the ACPI global lock) Signed-off-by:
Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20230121111728.168514-2-eugene.shalygin@gmail.comSigned-off-by:
-
Zev Weiss authored
The find_last_bit() call produces the index of the highest-numbered core in core_mask; because cores are numbered from zero, the number of elements we need to allocate is one more than that. Signed-off-by:
Zev Weiss <zev@bewilderbeest.net> Cc: stable@kernel.org # v5.18 Fixes: bf3608f3 ("hwmon: peci: Add cputemp driver") Reviewed-by:
Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20230202021825.21486-1-zev@bewilderbeest.netSigned-off-by:
-
- 03 Jan, 2023 2 commits
-
-
Zev Weiss authored
Commit 4ef27745 ("hwmon: (nct6775) Convert register access to regmap API") fumbled the shifting & masking of the fan_div values such that odd-numbered fan divisors would always be set to zero. Fix it so that we actually OR in the bits we meant to. Signed-off-by:
-
Armin Wolf authored
A user complained that the ftsteutates driver was displaying bogus values since its introduction. This happens because the sensor measurements need to be scaled in order to produce meaningful results: - the fan speed needs to be multiplied by 60 since its in RPS - the temperature is in degrees celsius and needs an offset of 64 - the voltage is in 1/256 of 3.3V The offical datasheet says the voltage needs to be divided by 256, but this is likely an off-by-one-error, since even the BIOS devides by 255 (otherwise 3.3V could not be measured). The voltage channels additionally need a board-specific multiplier, however this can be done by the driver since its board-specific. The reason the missing scaling of measurements is the way Fujitsu used this driver when it was still out-of-tree. Back then, all scaling was done in userspace by libsensors, even the generic one. Tested on a Fujitsu DS3401-B1. Fixes: 08426eda ("hwmon: Add driver for FTS BMC chip "Teutates"") Signed-off-by:
-
- 01 Jan, 2023 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Pass only an initialized perf event attribute to the LSM hook - Fix a use-after-free on the perf syscall's error path - A potential integer overflow fix in amd_core_pmu_init() - Fix the cgroup events tracking after the context handling rewrite - Return the proper value from the inherit_event() function on error * tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Call LSM hook after copying perf_event_attr perf: Fix use-after-free in error path perf/x86/amd: fix potential integer overflow on shift of a int perf/core: Fix cgroup events tracking perf core: Return error pointer if inherit_event() fails to find pmu_ctx
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Two fixes to correct how kprobes handles INT3 now that they're added by other functionality like the rethunks and not only kgdb - Remove __init section markings of two functions which are referenced by a function in the .text section * tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK x86/calldepth: Fix incorrect init section references
-
