Unexpected signals can disturb the bus-handling and lock it up. Don't use
interruptible in 'wait_event_*' and 'wake_*' as in commits
dc1972d0 (for cpm),
1ab082d7 (for mpc),
b7af349b (for omap).
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Remove the following sparse warnings (see "make C=1"):
 * drivers/i2c/busses/i2c-ali1563.c:91:3: warning: do-while statement
   is not a compound statement
 * drivers/i2c/busses/i2c-ali1563.c:161:3: warning: do-while statement
   is not a compound statement
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

With `while (timeout++ < MAX_TIMEOUT)' timeout reaches MAX_TIMEOUT + 1
after the loop. This is probably unlikely to produce a problem.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux:
  ARM: MINI2440: Fixup __initdata usage
  ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
  ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
  ARM: S3C: NAND: Check the existence of nr_map before copying

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sentelic - fix left/right horizontal scroll mapping
  Input: pmouse - move Sentelic probe down the list
  Input: add compat support for sysfs and /proc capabilities output
  Input: i8042 - add Dritek quirk for Acer Aspire 5610.
  Input: xbox - do not use GFP_KERNEL under spinlock
  Input: psmouse - fix Synaptics detection when protocol is disabled
  Input: bcm5974 - report ABS_MT events
  Input: davinci_keyscan - add device_enable method to platform data
  Input: evdev - be less aggressive about sending SIGIO notifies
  Input: atkbd - fix canceling event_work in disconnect
  Input: serio - fix potential deadlock when unbinding drivers
  Input: gf2k - fix &&/|| confusion in gf2k_connect()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: cpumask_of_node() should handle -1 as a node
  alpha: add myself as a maintainer, and drop mention of 2.4

* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: using correct fifo size for SCIF and SCIFA ports.
  sh: mach-ecovec24: Add motion sensor driver support.

inotify will WARN() if it finds that the idr and the fsnotify internals
somehow got out of sync.  It was only supposed to do this once but due
to this stupid bug it would warn every single time a problem was
detected.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 7e790dd5 ("inotify: fix
error paths in inotify_update_watch") inotify changed the manor in which
it gave watch descriptors back to userspace.  Previous to this commit
inotify acted like the following:

  inotify_add_watch(X, Y, Z) = 1
  inotify_rm_watch(X, 1);
  inotify_add_watch(X, Y, Z) = 2

but after this patch inotify would return watch descriptors like so:

  inotify_add_watch(X, Y, Z) = 1
  inotify_rm_watch(X, 1);
  inotify_add_watch(X, Y, Z) = 1

which I saw as equivalent to opening an fd where

  open(file) = 1;
  close(1);
  open(file) = 1;

seemed perfectly reasonable.  The issue is that quite a bit of userspace
apparently relies on the behavior in which watch descriptors will not be
quickly reused.  KDE relies on it, I know some selinux packages rely on
it, and I have heard complaints from other random sources such as debian
bug 558981.

Although the man page implies what we do is ok, we broke userspace so
this patch almost reverts us to the old behavior.  It is still slightly
racey and I have patches that would fix that, but they are rather large
and this will fix it for all real world cases.  The race is as follows:

 - task1 creates a watch and blocks in idr_new_watch() before it updates
   the hint.
 - task2 creates a watch and updates the hint.
 - task1 updates the hint with it's older wd
 - task removes the watch created by task2
 - task adds a new watch and will reuse the wd originally given to task2

it requires moving some locking around the hint (last_wd) but this should
solve it for the real world and be -stable safe.

As a side effect this patch papers over a bug in the lib/idr code which
is causing a large number WARN's to pop on people's system and many
reports in kerneloops.org.  I'm working on the root cause of that idr
bug seperately but this should make inotify immune to that issue.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a missing iterator variable thus fixing the conditional of the
for-loop in amd64_get_scrub_rate().
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

Remove some of the __initdata tags which are currently inappropriate for
platform_device and some of the platform data. These can be returned once
support for copying platform devices and data is added.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch fix mini2440 crash on boot due to improper __initdata
qualifier on mini2440_led1_pdata.
Signed-off-by: Uri Yosef <uri.yosef@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Since the fixed voltage regulator grew support for GPIO based
enables and GPIO 0 is valid on some systems we need to specify
that there is no valid GPIO enable control.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

The sh-sci driver used the wrong fifosize for PORT_SCIFA and PORT_SCIF
ports. If an incorrect size is used, the serial core will enforce an
early shutdown on the port, especially with baudrates < 9600.
Signed-off-by: Markus Pietrek <Markus.Pietrek@emtrion.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds support for the lis3lv02d motion sensor connected via
i2c on the Ecovec board. Tested with evtest.
Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
CC: linux-alpha@vger.kernel.org
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Blanchard <anton@samba.org>

CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
CC: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] tape_char: add missing compat_ptr conversion
  [S390] zcrypt: add sanity check before copy_from_user()
  [S390] unwire sys_recvmmsg again
  [S390] con3215: remove empty ioctl function
  [S390] dasd: add proper compat pointer conversion for symmetrix ioctl
  [S390] mmap: add missing compat_ptr conversion to both mmap compat syscalls
  [S390] bug: implement arch specific __WARN macro
  [S390] Move __cpu_logical_map to smp.c
  [S390] tape_block: remove ioctl function
  [S390] smp: remove volatile type quilifier from __cpu_logical_map
  [S390] smp: setup smp_processor_id early
  [S390] use helpers for rlimits
  [S390] fs3270: add missing compat ptr conversion
  [S390] vmcp: add missing compat ptr conversion
  [S390] cio: add missing compat ptr conversion
  [S390] dasd: add missing compat ptr conversion
  [S390] remove superfluous TIF_USEDFPU bit
  [S390] duplicate SIGTRAP on signal delivery.
  [S390] clear TIF_SINGLE_STEP for new process.
  [S390] fix loading of PER control registers for utrace.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  net: fix build erros with CONFIG_BUG=n, CONFIG_GENERIC_BUG=n
  ipv6: skb_dst() can be NULL in ipv6_hop_jumbo().
  tg3: Update copyright and driver version
  tg3: Disable 5717 serdes and B0 support
  tg3: Add reliable serdes detection for 5717 A0
  tg3: Fix std rx prod ring handling
  tg3: Fix std prod ring nicaddr for 5787 and 57765
  sfc: Fix conditions for MDIO self-test
  sfc: Fix polling for slow MCDI operations
  e1000e: workaround link issues on busy hub in half duplex on 82577/82578
  e1000e: MDIO slow mode should always be done for 82577
  ixgbe: update copyright dates
  ixgbe: Do not attempt to perform interrupts in netpoll when down
  cfg80211: fix refcount imbalance when wext is disabled
  mac80211: fix queue selection for data frames on monitor interfaces
  iwlwifi: silence buffer overflow warning
  iwlwifi: disable tx on beacon update notification
  iwlwifi: fix iwl_queue_used bug when read_ptr == write_ptr
  mac80211: fix endian error
  mac80211: add missing sanity checks for action frames
  ...

Since the structure field nr_map is optional, we need to check whether the
chip number map is provided to avoid unexpected NULL pointer exception.
Signed-off-by: Ramax Lo <ramaxlo@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Fixed build errors introduced by commit 7ad6848c (ip: fix mc_loop
checks for tunnels with multicast outer addresses)
Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes CERT-FI FICORA #341748

Discovered by Olli Jarva and Tuomo Untinen from the CROSS
project at Codenomicon Ltd.

Just like in CVE-2007-4567, we can't rely upon skb_dst() being
non-NULL at this point.  We fixed that in commit
e76b2b25 ("[IPV6]: Do no rely on
skb->dst before it is assigned.")

However commit 483a47d2 ("ipv6: added
net argument to IP6_INC_STATS_BH") put a new version of the same bug
into this function.

Complicating analysis further, this bug can only trigger when network
namespaces are enabled in the build.  When namespaces are turned off,
the dev_net() does not evaluate it's argument, so the dereference
would not occur.

So, for a long time, namespaces couldn't be turned on unless SYSFS was
disabled.  Therefore, this code has largely been disabled except by
people turning it on explicitly for namespace development.

With help from Eugene Teo <eugene@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the copyright notice for 2010 and updates the version
number to 3.106.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The B0 revision of the 5717 will not get enough testing by the time
2.6.33 ships.  Since the kernel is already at RC3, serdes support
will require too many patches to fix.  For these reasons, this patch
disables 5717 serdes support and will refuse to attach to all 5717
devices that are later than an A0 revision.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The serdes status bit does not work as intended for the 5717 A0.
This patch implements an alternative detection scheme that will only be
valid for A0 revisions.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are some tg3 devices that require the driver to post new rx
buffers in smaller increments.  Commit
4361935a, "tg3: Consider
rx_std_prod_idx a hw mailbox" changed how the driver tracks the rx
producer ring updates, but it does not make any special considerations
for the above-mentioned devices.  For those devices, it is possible for
the driver to hit the special case path, which updates the hardware
mailbox register but skips updating the shadow software mailbox member.
If the special case path represents the final mailbox update for this
ISR iteration, the hardware and software mailbox values will be out of
sync.  Ultimately, this will cause the driver to use a stale mailbox
value on the next iteration, which will appear to the hardware as a
large rx buffer update.  Bad things ensue.

The fix is to update the software shadow mailbox member when the special
case path is taken.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 87668d35, titled "tg3: Don't
touch RCB nic addresses", tried to avoid assigning the nic address of
the standard producer ring.  Unfortunately, the default nic address is
not correct for the 5787, the 5755M, or the 57765.  This patch
reenables the old behavior and opts out of the assignment only
for the 5717.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Tested-by: Chow Loong Jin <hyperair@ubuntu.com>
Tested-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MDIO self-test should not be run on boards without an MDIO PHY,
such as SFN5122F-R3 and later revisions.  It should also not try to
address a specific MMD in an MDIO clause 22 PHY.  Check the
mode_support field to decide which mode to use, if any.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the interface is down and we are using polled mode for MCDI
operations, we busy-wait for completion for approximately 1 jiffy
using udelay() and then back off to schedule().  But the completion
will not wake the task, since we are using polled mode!  We must use
schedule_timeout_uninterruptible() instead.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes a delay in hardware after every received packet allowing
more time for transmitted packets to go out in between received packets in
half duplex.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A previous 82577 workaround that set the MDIO access speed to slow mode for
every PHY register read/write when the cable is unplugged should instead
set the access mode to always be slow before any PHY register access.
Since the mode bit gets cleared when the PHY is reset, set the mode after
every PHY reset.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch resolves issues seen when running netconsole and rebooting via
reboot -f.  The issue was due to the fact that we were attempting to
perform interrupt actions when the q_vectors and rings had already been
freed via the ixgbe_shutdown routines.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus/bugfixes' of git://xenbits.xensource.com/people/ianc/linux-2.6:
  xen: fix hang on suspend.

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: change drm set mode messages as DRM_DEBUG
  drm: fix crtc no modes printf + typo
  drm/radeon/kms: only evict to GTT if CP is ready
  drm/radeon/kms: Fix crash getting TV info with no BIOS.
  drm/radeon/kms/rv100: reject modes > 135 Mhz on DVI (v2)
  drm/radeon/kms/r6xx+: make irq handler less verbose
  drm/radeon/kms: fix up LVDS handling on macs (v2)

Commit ac4c2a3b broke the build
of all powerpc boot wrappers.

It attempts to add an include of autoconf.h but used the wrong
path for it. It also adds -D__KERNEL__ to our boot wrapper, both
things that we pretty much didn't do on purpose so far.

We want our boot wrapper to remain independent enough of the kernel
for various reasons, one of them being that you can "wrap" an existing
kernel at distro install time which allows to ship one kernel image
and a set of boot wrappers for different platforms, the wrappers
don't have to be built out of the same kernel build tree.

It's also incorrect to do what the patch does in our boot environment
since we may not have a proper alignment exception handler which means
we may not be able to fixup the few cases where an unaligned access will
need SW emulation (depends on the core variant, could be when crossing
page or segment boundaries for example).

This patch fixes it by putting the old code back in and using the
new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
is set, which happens not to be set on powerpc since we don't include
autoconf.h. It also reverts the changes to our boot wrapper Makefile.

This means that x86 should, afaik, keep the optimisations since its
boot wrapper does include autoconf.h and define __KERNEL__ (though I
doubt they make that much different outside of slow embedded processors).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Add BTN_TOOL_FINGER for pad button reporting
  HID: add device IDs for new model of Apple Wireless Keyboard
  HID: fix pad button definition in hid-wacom
  HID: Support 171 byte variant of Samsung USB IR receiver
  HID: blacklist ET&T TC5UH touchscreen controller

* 'for-33' of git://repo.or.cz/linux-kbuild:
  Makefile: do not override LC_CTYPE
  kbuild: really fix bzImage build with non-bash sh