Address this GCC warning:

  arch/x86/kernel/kprobes/core.c:940:1:
   warning: 'inline' is not at beginning of declaration [-Wold-style-declaration]
    940 | static int nokprobe_inline kprobe_is_ss(struct kprobe_ctlblk *kcb)
        | ^~~~~~

[ mingo: Tidied up the changelog. ]

Fixes: 6256e668: ("x86/kprobes: Use int3 instead of debug trap for single-step")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210324144502.1154883-1-weiyongjun1@huawei.com

Fix can_boost() to identify indirect jmp and others using range case
correctly.

Since the condition in switch statement is opcode & 0xf0, it can not
evaluate to 0xff case. This should be under the 0xf0 case. However,
there is no reason to use the conbinations of the bit-masked condition
and lower bit checking.

Use range case to clean up the switch statement too.

Fixes: 6256e668 ("x86/kprobes: Use int3 instead of debug trap for single-step")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/161666692308.1120877.4675552834049546493.stgit@devnote2

There are 2 bugs in the can_boost() function because of using
x86 insn decoder. Since the insn->opcode never has a prefix byte,
it can not find CS override prefix in it. And the insn->attr is
the attribute of the opcode, thus inat_is_address_size_prefix(
insn->attr) always returns false.

Fix those by checking each prefix bytes with for_each_insn_prefix
loop and getting the correct attribute for each prefix byte.
Also, this removes unlikely, because this is a slow path.

Fixes: a8d11cd0 ("kprobes/x86: Consolidate insn decoder users for copying code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/161666691162.1120877.2808435205294352583.stgit@devnote2

Use int3 instead of debug trap exception for single-stepping the
probed instructions. Some instructions which change the ip
registers or modify IF flags are emulated because those are not
able to be single-stepped by int3 or may allow the interrupt
while single-stepping.

This actually changes the kprobes behavior.

- kprobes can not probe following instructions; int3, iret,
  far jmp/call which get absolute address as immediate,
  indirect far jmp/call, indirect near jmp/call with addressing
  by memory (register-based indirect jmp/call are OK), and
  vmcall/vmlaunch/vmresume/vmxoff.

- If the kprobe post_handler doesn't set before registering,
  it may not be called in some case even if you set it afterwards.
  (IOW, kprobe booster is enabled at registration, user can not
   change it)

But both are rare issue, unsupported instructions will not be
used in the kernel (or rarely used), and post_handlers are
rarely used (I don't see it except for the test code).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/161469874601.49483.11985325887166921076.stgit@devnote2

Since Grp5 far indirect JMP is FF "mod 101 r/m", it should be
(modrm & 0x38) == 0x28, and near indirect JMP is also 0x38 == 0x20.
So we can mask modrm with 0x30 and check 0x20.
This is actually what the original code does, it also doesn't care
the last bit. So the result code is same.

Thus, I think this is just a cosmetic cleanup.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/161469873475.49483.13257083019966335137.stgit@devnote2

Since the opcodes start from 0xff are group5 instruction group which is
not 2 bytes opcode but the extended opcode determined by the MOD/RM byte.

The commit abd82e53 ("x86/kprobes: Do not decode opcode in resume_execution()")
used insn->opcode.bytes[1], but that is not correct. We have to refer
the insn->modrm.bytes[1] instead.

Fixes: abd82e53 ("x86/kprobes: Do not decode opcode in resume_execution()")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/161469872400.49483.18214724458034233166.stgit@devnote2

Building perf on ppc causes:

  In file included from util/intel-pt-decoder/intel-pt-insn-decoder.c:15:
  util/intel-pt-decoder/../../../arch/x86/lib/insn.c:14:10: fatal error: asm/inat.h: No such file or directory
     14 | #include <asm/inat.h> /*__ignore_sync_check__ */
        |          ^~~~~~~~~~~~

Restore the relative include paths so that the compiler can find the
headers.

Fixes: 93281c4a ("x86/insn: Add an insn_decode() API")
Reported-by: Ian Rogers <irogers@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/20210317150858.02b1bbc8@canb.auug.org.au

... and move it above the only place it is used.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-22-bp@alien8.de

Now that it is not needed anymore, drop it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-21-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20210304174237.31945-20-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-19-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-18-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-17-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-16-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-15-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-14-bp@alien8.de

Split it into two helpers - a user- and a kernel-mode one for
readability. Yes, the original function body is not that convoluted but
splitting it makes following through that code trivial than having to
pay attention to each little difference when in user or in kernel mode.

No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-13-bp@alien8.de

Simplify code, improve decoding error checking.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-12-bp@alien8.de

Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-11-bp@alien8.de

No functional changes, just simplification.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-10-bp@alien8.de

branch_type() doesn't need to call the full insn_decode() because it
doesn't need it in all cases thus leave the calls separate.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-9-bp@alien8.de

intel_pmu_pebs_fixup_ip() needs only the insn length so use the
appropriate helper instead of a full decode. A full decode differs only
in running insn_complete() on the decoded insn but that is not needed
here.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-8-bp@alien8.de

Other than simplifying the code there should be no functional changes
resulting from this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-7-bp@alien8.de

Now that the different instruction-inspecting functions return a value,
test that and return early from callers if error has been encountered.

While at it, do not call insn_get_modrm() when calling
insn_get_displacement() because latter will make sure to call
insn_get_modrm() if ModRM hasn't been parsed yet.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-6-bp@alien8.de

Users of the instruction decoder should use this to decode instruction
bytes. For that, have insn*() helpers return an int value to denote
success/failure. When there's an error fetching the next insn byte and
the insn falls short, return -ENODATA to denote that.

While at it, make insn_get_opcode() more stricter as to whether what has
seen so far is a valid insn and if not.

Copy linux/kconfig.h for the tools-version of the decoder so that it can
use IS_ENABLED().

Also, cast the INSN_MODE_KERN dummy define value to (enum insn_mode)
for tools use of the decoder because perf tool builds with -Werror and
errors out with -Werror=sign-compare otherwise.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-5-bp@alien8.de

Add an explicit __ignore_sync_check__ marker which will be used to mark
lines which are supposed to be ignored by file synchronization check
scripts, its advantage being that it explicitly denotes such lines in
the code.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-4-bp@alien8.de

It wasn't documented so add it. No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210304174237.31945-3-bp@alien8.de

Rename insn_decode() to insn_decode_from_regs() to denote that it
receives regs as param and uses registers from there during decoding.
Free the former name for a more generic version of the function.

No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210304174237.31945-2-bp@alien8.de

Pick up dependent changes.
Signed-off-by: Borislav Petkov <bp@suse.de>

Pick up dependent SEV-ES urgent changes to base new work ontop.
Signed-off-by: Borislav Petkov <bp@suse.de>

Doing a

	prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);

will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.

/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.

This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Thomas Gleixner:
 "A set of irqchip updates:

   - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct

   - Add a missing DT compatible string for the Ingenic driver

   - Remove the pointless debugfs_file pointer from struct irqdomain"

* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Add support for the JZ4760
  dt-bindings/irq: Add compatible string for the JZ4760B
  irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
  irqdomain: Remove debugfs_file from struct irq_domain

Pull timer fix from Thomas Gleixner:
 "A single fix in for hrtimers to prevent an interrupt storm caused by
  the lack of reevaluation of the timers which expire in softirq context
  under certain circumstances, e.g. when the clock was set"

* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent a NULL pointer dereference in the migration_stop_cpu()
     mechanims

   - Prevent self concurrency of affine_move_task()

   - Small fixes and cleanups related to task migration/affinity setting

   - Ensure that sync_runqueues_membarrier_state() is invoked on the
     current CPU when it is in the cpu mask"

* tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/membarrier: fix missing local execution of ipi_sync_rq_state()
  sched: Simplify set_affinity_pending refcounts
  sched: Fix affine_move_task() self-concurrency
  sched: Optimize migration_cpu_stop()
  sched: Collate affine_move_task() stoppers
  sched: Simplify migration_cpu_stop()
  sched: Fix migration_cpu_stop() requeueing

Pull objtool fix from Thomas Gleixner:
 "A single objtool fix to handle the PUSHF/POPF validation correctly for
  the paravirt changes which modified arch_local_irq_restore not to use
  popf"

* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool,x86: Fix uaccess PUSHF/POPF validation

Pull locking fixes from Thomas Gleixner:
 "A couple of locking fixes:

   - A fix for the static_call mechanism so it handles unaligned
     addresses correctly.

   - Make u64_stats_init() a macro so every instance gets a seperate
     lockdep key.

   - Make seqcount_latch_init() a macro as well to preserve the static
     variable which is used for the lockdep key"

* tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  seqlock,lockdep: Fix seqcount_latch_init()
  u64_stats,lockdep: Fix u64_stats_init() vs lockdep
  static_call: Fix the module key fixup

Pull perf fixes from Borislav Petkov:

 - Make sure PMU internal buffers are flushed for per-CPU events too and
   properly handle PID/TID for large PEBS.

 - Handle the case properly when there's no PMU and therefore return an
   empty list of perf MSRs for VMX to switch instead of reading random
   garbage from the stack.

* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
  perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
  perf/core: Flush PMU internal buffers for per-CPU events

Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
 "Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
  added v5.10, but failed to take the SetVirtualAddressMap() RT service
  into account"

* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table

Pull x86 fixes from Borislav Petkov:

 - A couple of SEV-ES fixes and robustifications: verify usermode stack
   pointer in NMI is not coming from the syscall gap, correctly track
   IRQ states in the #VC handler and access user insn bytes atomically
   in same handler as latter cannot sleep.

 - Balance 32-bit fast syscall exit path to do the proper work on exit
   and thus not confuse audit and ptrace frameworks.

 - Two fixes for the ORC unwinder going "off the rails" into KASAN
   redzones and when ORC data is missing.

* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __copy_from_user_inatomic()
  x86/sev-es: Correctly track IRQ states in runtime #VC handler
  x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
  x86/sev-es: Introduce ip_within_syscall_gap() helper
  x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
  x86/unwind/orc: Silence warnings caused by missing ORC data
  x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2