- 27 Jul, 2021 21 commits
-
-
Arnd Bergmann authored
The bonding driver supports two command codes for each operation: one in the SIOCDEVPRIVATE range and another one with the same definition but a unique command code. Only the second set currently works in compat mode, as the ifr_data expansion overwrites part of the ifr_slave field. Move the private ones into ndo_siocdevprivate and change the implementation to call the other function. This makes both version work correctly. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The tulip driver has a debugging method over ioctl built-in, but it does not actually check the command type, which may end up leading to random behavior when trying to run other ioctls on it. Change the driver to use ndo_siocdevprivate and limit the execution further to the first private command code. If anyone still has tools to run these debugging commands, they might have to be patched for it if they pass different ioctl command. The function has existed in this form since the driver was merged in Linux-1.1.86. Cc: linux-parisc@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
phonet has a single private ioctl that is broken in compat mode on big-endian machines today because the data returned from it is never copied back to user space. Move it over to the ndo_siocdevprivate callback, which also fixes the compat issue. Cc: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by:
Rémi Denis-Courmont <courmisch@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The bridge driver has an old set of ioctls using the SIOCDEVPRIVATE namespace that have never worked in compat mode and are explicitly forbidden already. Move them over to ndo_siocdevprivate and fix compat mode for these, because we can. Cc: Roopa Prabhu <roopa@nvidia.com> Cc: Nikolay Aleksandrov <nikolay@nvidia.com> Cc: bridge@lists.linux-foundation.org Signed-off-by:
-
Arnd Bergmann authored
hostap has a combination of iwpriv ioctls that do not work at all, and two SIOCDEVPRIVATE commands that work natively but lack a compat conversion handler. For the moment, move them over to the new ndo_siocdevprivate interface and return an error for compat mode. Cc: Jouni Malinen <j@w1.fi> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
wlan-ng has two private ioctls that correctly work in compat mode. Move these over to the new ndo_siocdevprivate mechanism. The p80211netdev_ethtool() function is commented out and has no use here, so this can be removed Signed-off-by:
-
Arnd Bergmann authored
rtl8188eu has an "android private" ioctl command multiplexer that is not currently safe for use in compat mode because of its triple-indirect pointer. rtl8723bs uses a different interface on the SIOCDEVPRIVATE command, based on the iwpriv data structure Both also have normal unreachable iwpriv commands, and all of the above should probably just get removed. For the moment, just switch over to the new interface. Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Arnd Bergmann authored
SIOCDEVPRIVATE ioctl commands are mainly used in really old drivers, and they have a number of problems: - They hide behind the normal .ndo_do_ioctl function that is also used for other things in modern drivers, so it's hard to spot a driver that actually uses one of these - Since drivers use a number different calling conventions, it is impossible to support compat mode for them in a generic way. - With all drivers using the same 16 commands codes, there is no way to introspect the data being passed through things like strace. Add a new net_device_ops callback pointer, to address the first two of these. Separating them from .ndo_do_ioctl makes it easy to grep for drivers with a .ndo_siocdevprivate callback, and the unwieldy name hopefully makes it easier to spot in code review. By passing the ifreq structure and the ifr_data pointer separately, it is no longer necessary to overload these, and the driver can use either one for a given command. Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by:
-
David S. Miller authored
Neal Cardwell says: ==================== more accurate DSACK processing for RACK-TLP This patch series includes two minor improvements to tighten up the accuracy of the processing of incoming DSACK information, so that RACK-TLP behavior is faster and more precise: first, to ensure we detect packet loss in some extra corner cases; and second, to avoid growing the RACK reordering window (and delaying fast recovery) in cases where it seems clear we don't need to. ==================== Signed-off-by: -
Neal Cardwell authored
Previously, a DSACK could expand the RACK reordering window when no reordering has been seen, and/or when the DSACK was due to an unnecessary TLP retransmit (rather than a spurious fast recovery due to reordering). This could result in unnecessarily growing the RACK reordering window and thus unnecessarily delaying RACK-based fast recovery episodes. To avoid these issues, this commit tightens the conditions under which a DSACK triggers the RACK reordering window to grow, so that a connection only expands its RACK reordering window if: (a) reordering has been seen in the connection (b) a DSACKed range does not match the most recent TLP retransmit Signed-off-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Priyaranjan Jha <priyarjha@google.com> Signed-off-by:
-
Yuchung Cheng authored
Previously TLP is considered spurious if the sender receives any DSACK during a TLP episode. This patch further checks the DSACK sequences match the TLP's to improve accuracy. Signed-off-by:
-
Tonghao Zhang authored
qdisc_enqueue tracepoint can work with qdisc:qdisc_dequeue to measure packets latency in qdisc queues. Add a new field txq for it, then we can retrieve more info. Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Jason Wang authored
Some return variables are never changed until function returned. These variables are unneeded for their functions. Therefore, the unneeded return variables can be removed safely by returning their initial values. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Ioana Ciornei authored
Add a documentation entry for the DPAA2 switch listing its requirements, features and some examples to go along them. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Mark Gray says: ==================== openvswitch: per-cpu upcall patchwork issues Some issues were raised by patchwork at: https://patchwork.kernel.org/project/netdevbpf/patch/20210630095350.817785-1-mark.d.gray@redhat.com/#24285159 ==================== Signed-off-by:
-
Mark Gray authored
fix incorrect type in argument 1 (different address spaces) ../net/openvswitch/datapath.c:169:17: warning: incorrect type in argument 1 (different address spaces) ../net/openvswitch/datapath.c:169:17: expected void const * ../net/openvswitch/datapath.c:169:17: got struct dp_nlsk_pids [noderef] __rcu *upcall_portids Found at: https://patchwork.kernel.org/project/netdevbpf/patch/20210630095350.817785-1-mark.d.gray@redhat.com/#24285159Signed-off-by:
Mark Gray <mark.d.gray@redhat.com> Signed-off-by:
-
Mark Gray authored
Signed-off-by:
-
Mark Gray authored
Signed-off-by:
-
Yajun Deng authored
Add the case when nlh is NULL in nlmsg_report(), so that the caller doesn't need to deal with this case. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
-
Vladimir Oltean authored
Currently, all drivers depend on the bool CONFIG_NET_SWITCHDEV, but only the drivers that call some sort of function exported by the bridge, like br_vlan_enabled() or whatever, have an extra dependency on CONFIG_BRIDGE. Since the blamed commit, all switchdev drivers have a functional dependency upon switchdev_bridge_port_{,un}offload(), which is a pair of functions exported by the bridge module and not by the bridge-independent part of CONFIG_NET_SWITCHDEV. Problems appear when we have: CONFIG_BRIDGE=m CONFIG_NET_SWITCHDEV=y CONFIG_TI_CPSW_SWITCHDEV=y because cpsw, am65_cpsw and sparx5 will then be built-in but they will call a symbol exported by a loadable module. This is not possible and will result in the following build error: drivers/net/ethernet/ti/cpsw_new.o: in function `cpsw_netdevice_event': drivers/net/ethernet/ti/cpsw_new.c:1520: undefined reference to `switchdev_bridge_port_offload' drivers/net/ethernet/ti/cpsw_new.c:1537: undefined reference to `switchdev_bridge_port_unoffload' As mentioned, the other switchdev drivers don't suffer from this because switchdev_bridge_port_offload() is not the first symbol exported by the bridge that they are calling, so they already needed to deal with this in the same way. Fixes: 2f5dc00f ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded") Reported-by:Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Saeed Mahameed authored
In the cited commit, copy_to_user() got called with the wrong pointer, instead of passing the actual buffer ptr to copy from, a pointer to the pointer got passed, which causes a buffer overflow calltrace to pop up when executing "ethtool -x ethX". Fix ethtool_rxnfc_copy_to_user() to use the rxnfc pointer as passed to the function, instead of a pointer to it. This fixes below call trace: [ 15.533533] ------------[ cut here ]------------ [ 15.539007] Buffer overflow detected (8 < 192)! [ 15.544110] WARNING: CPU: 3 PID: 1801 at include/linux/thread_info.h:200 copy_overflow+0x15/0x20 [ 15.549308] Modules linked in: [ 15.551449] CPU: 3 PID: 1801 Comm: ethtool Not tainted 5.14.0-rc2+ #1058 [ 15.553919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 15.558378] RIP: 0010:copy_overflow+0x15/0x20 [ 15.560648] Code: e9 7c ff ff ff b8 a1 ff ff ff eb c4 66 0f 1f 84 00 00 00 00 00 55 48 89 f2 89 fe 48 c7 c7 88 55 78 8a 48 89 e5 e8 06 5c 1e 00 <0f> 0b 5d c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 [ 15.565114] RSP: 0018:ffffad49c0523bd0 EFLAGS: 00010286 [ 15.566231] RAX: 0000000000000000 RBX: 00000000000000c0 RCX: 0000000000000000 [ 15.567616] RDX: 0000000000000001 RSI: ffffffff8a7912e7 RDI: 00000000ffffffff [ 15.569050] RBP: ffffad49c0523bd0 R08: ffffffff8ab2ae28 R09: 00000000ffffdfff [ 15.570534] R10: ffffffff8aa4ae40 R11: ffffffff8aa4ae40 R12: 0000000000000000 [ 15.571899] R13: 00007ffd4cc2a230 R14: ffffad49c0523c00 R15: 0000000000000000 [ 15.573584] FS: 00007f538112f740(0000) GS:ffff96d5bdd80000(0000) knlGS:0000000000000000 [ 15.575639] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.577092] CR2: 00007f5381226d40 CR3: 0000000013542000 CR4: 00000000001506e0 [ 15.578929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.580695] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.582441] Call Trace: [ 15.582970] ethtool_rxnfc_copy_to_user+0x30/0x46 [ 15.583815] ethtool_get_rxnfc.cold+0x23/0x2b [ 15.584584] dev_ethtool+0x29c/0x25f0 [ 15.585286] ? security_netlbl_sid_to_secattr+0x77/0xd0 [ 15.586728] ? do_set_pte+0xc4/0x110 [ 15.587349] ? _raw_spin_unlock+0x18/0x30 [ 15.588118] ? __might_sleep+0x49/0x80 [ 15.588956] dev_ioctl+0x2c1/0x490 [ 15.589616] sock_ioctl+0x18e/0x330 [ 15.591143] __x64_sys_ioctl+0x41c/0x990 [ 15.591823] ? irqentry_exit_to_user_mode+0x9/0x20 [ 15.592657] ? irqentry_exit+0x33/0x40 [ 15.593308] ? exc_page_fault+0x32f/0x770 [ 15.593877] ? exit_to_user_mode_prepare+0x3c/0x130 [ 15.594775] do_syscall_64+0x35/0x80 [ 15.595397] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.596037] RIP: 0033:0x7f5381226d4b [ 15.596492] Code: 0f 1e fa 48 8b 05 3d b1 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d b1 0c 00 f7 d8 64 89 01 48 [ 15.598743] RSP: 002b:00007ffd4cc2a1f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 15.599804] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5381226d4b [ 15.600795] RDX: 00007ffd4cc2a350 RSI: 0000000000008946 RDI: 0000000000000003 [ 15.601712] RBP: 00007ffd4cc2a340 R08: 00007ffd4cc2a350 R09: 0000000000000001 [ 15.602751] R10: 00007f538128a990 R11: 0000000000000246 R12: 0000000000000000 [ 15.603882] R13: 00007ffd4cc2a350 R14: 00007ffd4cc2a4b0 R15: 0000000000000000 [ 15.605042] ---[ end trace 325cf185e2795048 ]--- Fixes: dd98d289 ("ethtool: improve compat ioctl handling") Reported-by:
Shannon Nelson <snelson@pensando.io> CC: Arnd Bergmann <arnd@arndb.de> CC: Christoph Hellwig <hch@lst.de> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Tested-by:
-
- 26 Jul, 2021 19 commits
-
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: defer taking uC proxy clock This series rearranges some of the IPA initialization code. The first patch gets rid of two trivial setup and teardown functions, open-coding them in their callers instead. The second patch has memory regions get configured before endpoints. IPA interrupts do not depend on GSI being initialized. Therefore they can be initialized in the config phase rather than waiting for setup. The third patch moves this initialization earlier; memory regions must already be defined, so it's done after memory config. The microcontroller also has no dependency on GSI, though it does require IPA interrupts to be configured. The fourth patch moves microcontroller initialization so it too happens during the config phase rather than setup. Finally, we currently take a "proxy clock" for the microcontroller during the config phase, dropping it only after we learn the microcontroller is initialized. But microcontroller initialization is started by the modem, so there's no point in taking that clock reference before we know the modem has booted. So the last patch arranges to wait to take the "proxy clock" for the microcontroller until we know the modem is about to boot. ==================== Signed-off-by: -
Alex Elder authored
The first time it's booted, the modem loads and starts the IPA-resident microcontroller. Once the microcontroller has completed its initialization, it notifies the AP it's "ready" by sending an INIT_COMPLETED response message. Until it receives that microcontroller message, the AP must ensure the IPA core clock remains operational. Currently, a "proxy" clock reference is taken in ipa_uc_config(), dropping it again once the message is received. However there could be a long delay between when ipa_config() completes and when modem actually starts. And because the microcontroller gets loaded by the modem, there's no need to get the modem "proxy clock" until the first time it starts. Create a new function ipa_uc_clock() which takes the "proxy" clock reference for the microcontroller. Call it when we get remoteproc SSR notification that the modem is about to start. Keep an additional flag to record whether this proxy clock reference needs to be dropped at shutdown time, and issue a warning if we get the microcontroller message either before the clock reference is taken, or after it has already been dropped. Drop the nearby use of "hh" length modifiers, which are no longer encouraged in the kernel. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Initializing up the IPA-resident microcontroller requires the IPA clock, and sets up two IPA interrupt handlers, but this does not require GSI access. The interrupt handlers also require the clock to be enabled, and require the IPA memory regions to be configured, but neither requires GSI access. As a result, the microcontroller can be initialized during the "config" rather than "setup" phase of IPA initialization. Initialize the microcontroller in ipa_config() rather than ipa_setup(), and rename the called function ipa_uc_config(). Do the inverse in ipa_deconfig() rather than ipa_teardown(), and rename the function for that case ipa_uc_deconfig(). Signed-off-by:
-
Alex Elder authored
Initialization of the IPA driver has several phases: - "init" phase can be done without any access to IPA hardware - "config" phase requires the IPA hardware to be clocked - "setup" phase requires the GSI layer to be functional Currently, initialization for the IPA interrupt handling code occurs in the setup phase. It requires access to the IPA hardware but does not need GSI, so it can be moved to the config phase instead. Call the interrupt configuration function early in ipa_config() rather than from ipa_setup(). Rename ipa_interrupt_setup() to be ipa_interrupt_config(), and ipa_interrupt_teardown() to be ipa_interupt_deconfig(), so their names properly indicate when they get called. Signed-off-by:
-
Alex Elder authored
IPA-resident memory is one of the most primitive resources that needs initialization, so call init_mem_config() early in ipa_config(). This is in preparation for initializing the IPA-resident microcontroller earlier. Signed-off-by:
-
Alex Elder authored
The functions ipa_modem_setup() and ipa_modem_teardown() are trivial wrappers that call ipa_qmi_setup() and ipa_qmi_teardown(). Just call the QMI functions directly, and get rid of the wrappers. Improve the documentation of what setting up QMI does. Signed-off-by:
-
Gustavo A. R. Silva authored
Fix the following out-of-bounds warnings: net/core/flow_dissector.c: In function '__skb_flow_dissect': >> net/core/flow_dissector.c:1104:4: warning: 'memcpy' offset [24, 39] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'struct in6_addr' at offset 8 [-Warray-bounds] 1104 | memcpy(&key_addrs->v6addrs, &iph->saddr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1105 | sizeof(key_addrs->v6addrs)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/linux/ipv6.h:5, from net/core/flow_dissector.c:6: include/uapi/linux/ipv6.h:133:18: note: subobject 'saddr' declared here 133 | struct in6_addr saddr; | ^~~~~ >> net/core/flow_dissector.c:1059:4: warning: 'memcpy' offset [16, 19] from the object at '<unknown>' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 12 [-Warray-bounds] 1059 | memcpy(&key_addrs->v4addrs, &iph->saddr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1060 | sizeof(key_addrs->v4addrs)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from include/linux/ip.h:17, from net/core/flow_dissector.c:5: include/uapi/linux/ip.h:103:9: note: subobject 'saddr' declared here 103 | __be32 saddr; | ^~~~~ The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). So, the compiler legitimately complains about it. As these are just a couple of members, fix this by copying each one of them in separate calls to memcpy(). This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109Reported-by:kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Fix the following out-of-bounds warning: In function 'ip_copy_addrs', inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2: net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds] 449 | memcpy(&iph->saddr, &fl4->saddr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 450 | sizeof(fl4->saddr) + sizeof(fl4->daddr)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The problem is that the original code is trying to copy data into a couple of struct members adjacent to each other in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &iph->saddr and &fl4->saddr. As these are just a couple of struct members, fix this by using direct assignments, instead of memcpy(). This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109Reported-by: -
Alex Elder authored
The RMNet and IPA drivers both support inline checksum offload now. So enable it for the TX and RX modem endoints for IPA version 4.5+. Signed-off-by:
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: kill IPA_VALIDATION A few months ago I proposed cleaning up some code that validates certain things conditionally, arguing that doing so once is enough, thus doing so always should not be necessary. https://lore.kernel.org/netdev/20210320141729.1956732-1-elder@linaro.org/ Leon Romanovsky felt strongly that this was a mistake, and in the end I agreed to change my plans. This series finally completes what I said I would do about this, ultimately eliminating the IPA_VALIDATION symbol and conditional code entirely. The first patch both extends and simplifies some validation done for IPA immediate commands, and performs those tests unconditionally. The second patch fixes a bug that wasn't normally exposed because of the conditional compilation (a reason Leon was right about this). It makes filter and routing table validation occur unconditionally. The third eliminates the remaining conditionally-defined code and removes the line in the Makefile used to enable validation. And the fourth removes all comments containing ipa_assert() statements, replacing most of them with WARN_ON() calls. ==================== Signed-off-by:
-
Alex Elder authored
I've added commented assertions to record certain properties that can be assumed to hold in certain places in the IPA code. Convert these into real WARN_ON() calls so the assertions are actually checked, using the standard WARN_ON() mechanism. Where errors can be returned, return an error if a warning is triggered. Signed-off-by:
-
Alex Elder authored
There are only a few remaining spots that validate IPA code conditional on whether a symbol is defined at compile time. The checks are not expensive, so just build them always. This completes the removal of all CONFIG_VALIDATE/CONFIG_VALIDATION IPA code. Signed-off-by:
-
Alex Elder authored
All checks in ipa_table_validate_build() are computed at build time, so build that unconditionally. In ipa_table_valid() calls to ipa_table_valid_one() are missing the IPA pointer parameter is missing in (a bug that shows up only when IPA_VALIDATE is defined). Don't bother checking whether hashed table memory regions are valid if hashed tables are not supported. With those things fixed, have these table validation functions built unconditionally (not dependent on IPA_VALIDATE). Signed-off-by:
-
Alex Elder authored
Stop supporting different sizes for hashed and non-hashed filter or route tables. Add BUILD_BUG_ON() calls to verify the sizes of the fields in the filter/route table initialization immediate command are the same. Add a check to ipa_cmd_table_valid() to ensure the size of the memory region being checked fits within the immediate command field that must hold it. Remove two Boolean parameters used only for error reporting. This actually fixes a bug that would only show up if IPA_VALIDATE were defined. Define ipa_cmd_table_valid() unconditionally (no longer dependent on IPA_VALIDATE). Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Traffic termination for sja1105 ports under VLAN-aware bridge This set of patches updates the sja1105 DSA driver to be able to send and receive network stack packets on behalf of a VLAN-aware upper bridge interface. The reasons why this has traditionally been a problem are explained in the "Traffic support" section of Documentation/networking/dsa/sja1105.rst. (the entire documentation will be revised in a separate patch series). The limitations that have prevented us from doing this so far have now been partially lifted by the bridge's ability to send a packet with skb->offload_fwd_mark = true, which means that the accelerator is allowed to look up its hardware FDB when sending a packet and deliver it to those destination ports. Basically skb->dev is now just a conduit to the switchdev driver's ndo_start_xmit(), and does not guarantee that the packet will really be transmitted on that port (but it will be transmitted where it should, nonetheless). Apart from the ability to perform IP termination on VLAN-aware bridges on top of sja1105 interfaces, we also gain the following features: - VLAN-aware software bridging between sja1105 ports and "foreign" (non-DSA) interfaces - software bridging between sja1105 bridge ports, and software LAG uppers of sja1105 ports (as long as the bridge is VLAN-aware) The only things that don't work are: 1. to create an AF_PACKET socket on top of a sja1105 port that is under a VLAN-aware bridge. This is because the "imprecise RX" procedure selects an RX port for data plane* packets based on the assumption that the packet will land in the bridge's data path. If ebtables rules are added to remove some packets from the bridge's data path, that assumption will be broken. Nonetheless, this is not a limitation that negatively impacts the known use cases with this switch. If there was a way to impose user space restrictions against creating AF_PACKET sockets on this particular configuration, I could be interested in adding those restrictions, but I think there are other known broken configs already which are not checked by the kernel today (like for example that the bridge's rx_handler steals packets anyway from AF_PACKET sockets with exact-match ptype handlers, as opposed to ptype_all which are processed earlier; this is precisely the reason why ebtables rules are generally needed to avoid that). 2. to send traffic on behalf of an 8021q upper of a standalone interface, while other sja1105 ports are part of a VLAN-aware bridge. This is because sja1105 sets ds->vlan_filtering_is_global = true, so we cannot make the standalone port ignore the VLAN header from the packet on RX, so we cannot make tag_8021q enforce its own pvid for the packets belonging to that port's 8021q upper. So we cannot determine in the first place that packets come from that port, unless we iterate through all 8021q uppers of all ports, and enforce uniqueness of VLAN IDs. I am not sure if this is what I want / if it is worth it, so currently all 8021q uppers are denied, regardless of whether the switch has ports under a VLAN-aware bridge or not (otherwise it becomes complicated even to track the state). Nonetheless, the VID uniqueness of all 8021q uppers does raise another question: what to do with VID 0, which has no 8021q upper, but the 8021q module adds it to our RX filter with vlan_vid_add(). I am honestly not sure what to do. The best I can do is enable a hardware bit in sja1105 which reclassifies VID 0 frames to the PVID, and they will be sent on the CPU port using either the tag_8021q pvid of standalone ports, or the bridge pvid of VLAN-aware ports. So at the very least, those packets are still 'kinda' processed as if they were untagged, but the VID 0 is lost, though. In my defence, Marvell appears to do the same thing with reclassifying VID 0 frames, see commit b8b79c41 ("net: dsa: mv88e6xxx: Fix adding vlan 0"). *Control packets (currently hardcoded in sja1105 as link-local packets for MAC DA ranges 01-80-c2-xx-xx-xx and 01-1b-19-xx-xx-xx) are received based on packet traps and their precise source port is always known. I have taken one patch from Colin because my work conflicts with his, and integrating it all through the same series avoids that. ==================== Signed-off-by:
-
Vladimir Oltean authored
This reverts commit cc1939e4. Currently 2 classes of DSA drivers are able to send/receive packets directly through the DSA master: - drivers with DSA_TAG_PROTO_NONE - sja1105 Now that sja1105 has gained the ability to perform traffic termination even under the tricky case (VLAN-aware bridge), and that is much more functional (we can perform VLAN-aware bridging with foreign interfaces), there is no reason to keep this code in the receive path of the network core. So delete it. Signed-off-by:
-
Vladimir Oltean authored
The main desire for having this feature in sja1105 is to support network stack termination for traffic coming from a VLAN-aware bridge. For sja1105, offloading the bridge data plane means sending packets as-is, with the proper VLAN tag, to the chip. The chip will look up its FDB and forward them to the correct destination port. But we support bridge data plane offload even for VLAN-unaware bridges, and the implementation there is different. In fact, VLAN-unaware bridging is governed by tag_8021q, so it makes sense to have the .bridge_fwd_offload_add() implementation fully within tag_8021q. The key difference is that we only support 1 VLAN-aware bridge, but we support multiple VLAN-unaware bridges. So we need to make sure that the forwarding domain is not crossed by packets injected from the stack. For this, we introduce the concept of a tag_8021q TX VLAN for bridge forwarding offload. As opposed to the regular TX VLANs which contain only 2 ports (the user port and the CPU port), a bridge data plane TX VLAN is "multicast" (or "imprecise"): it contains all the ports that are part of a certain bridge, and the hardware will select where the packet goes within this "imprecise" forwarding domain. Each VLAN-unaware bridge has its own "imprecise" TX VLAN, so we make use of the unique "bridge_num" provided by DSA for the data plane offload. We use the same 3 bits from the tag_8021q VLAN ID format to encode this bridge number. Note that these 3 bit positions have been used before for sub-VLANs in best-effort VLAN filtering mode. The difference is that for best-effort, the sub-VLANs were only valid on RX (and it was documented that the sub-VLAN field needed to be transmitted as zero). Whereas for the bridge data plane offload, these 3 bits are only valid on TX. Signed-off-by:
-
Vladimir Oltean authored
This is already common knowledge by now, but the sja1105 does not have hardware support for DSA tagging for data plane packets, and tag_8021q sets up a unique pvid per port, transmitted as VLAN-tagged towards the CPU, for the source port to be decoded nonetheless. When the port is part of a VLAN-aware bridge, the pvid committed to hardware is taken from the bridge and not from tag_8021q, so we need to work with that the best we can. Configure the switches to send all packets to the CPU as VLAN-tagged (even ones that were originally untagged on the wire) and make use of dsa_untag_bridge_pvid() to get rid of it before we send those packets up the network stack. With the classified VLAN used by hardware known to the tagger, we first peek at the VID in an attempt to figure out if the packet was received from a VLAN-unaware port (standalone or under a VLAN-unaware bridge), case in which we can continue to call dsa_8021q_rcv(). If that is not the case, the packet probably came from a VLAN-aware bridge. So we call the DSA helper that finds for us a "designated bridge port" - one that is a member of the VLAN ID from the packet, and is in the proper STP state - basically these are all checks performed by br_handle_frame() in the software RX data path. The bridge will accept the packet as valid even if the source port was maybe wrong. So it will maybe learn the MAC SA of the packet on the wrong port, and its software FDB will be out of sync with the hardware FDB. So replies towards this same MAC DA will not work, because the bridge will send towards a different netdev. This is where the bridge data plane offload ("imprecise TX") added by the next patch comes in handy. The software FDB is wrong, true, but the hardware FDB isn't, and by offloading the bridge forwarding plane we have a chance to right a wrong, and have the hardware look up the FDB for us for the reply packet. So it all cancels out. Signed-off-by: -
Vladimir Oltean authored
With tag_sja1105.c's only ability being to perform an imprecise RX procedure and identify whether a packet comes from a VLAN-aware bridge or not, we have no way to determine whether a packet with VLAN ID 5 comes from, say, br0 or br1. Actually we could, but it would mean that we need to restrict all VLANs from br0 to be different from all VLANs from br1, and this includes the default_pvid, which makes a setup with 2 VLAN-aware bridges highly imprectical. The fact of the matter is that this isn't even that big of a practical limitation, since even with a single VLAN-aware bridge we can pretty much enforce forwarding isolation based on the VLAN port membership. So in the end, tell the user that they need to model their setup using a single VLAN-aware bridge. Signed-off-by:
-
