- 26 Aug, 2015 8 commits
-
-
Bart Van Assche authored
Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Acked-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
Bart Van Assche authored
Let the debug statement in qlafx00_tm_iocb_entry() report both rsp_info and rsp_info_len instead of reporting rsp_info_len twice. Signed-off-by:
-
Johannes Thumshirn authored
Destroy st_index_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by:Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Bjorn Helgaas authored
Fix whitespace and indentation errors. No code change. [jejb: checkpatch fixes] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by:
-
Bjorn Helgaas authored
Use dev_printk() when possible to make messages more useful. Signed-off-by:
-
Bjorn Helgaas authored
Use dev_printk() when possible to make messages more useful. Signed-off-by:
-
Hannes Reinecke authored
Log the ALUA state change unit attention correctly with the message log and emit an event to allow user-space tools to react to it. Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
-
Dan Carpenter authored
These are signed values the come from the user, we put a cap on the upper bounds but not on the lower bounds. We use "karg.dataSgeOffset" to calculate "sz". We verify "sz" and proceed as if that means that "karg.dataSgeOffset" is correct but this fails to consider that the "sz" calculations can have integer overflows. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 12 Aug, 2015 10 commits
-
-
Vitaly Kuznetsov authored
Comment in struct Scsi_Host says that drivers are not supposed to access __devices directly. storvsc_host_scan() doesn't happen in irq context so we can just use shost_for_each_device(). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Long Li <longli@microsoft.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Under the 'default' case in scmnd->sc_data_direction we have 3 options: - DMA_NONE which we handle correctly. - DMA_BIDIRECTIONAL which is never supposed to be set by SCSI stack. - Garbage value. Do WARN() and return -EINVAL in the last two cases. virtio_scsi does BUG_ON() here but it looks like an overkill. Reported-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Seymour, Shane M authored
Convert DRIVER_ATTR macros to DRIVER_ATTR_RO requested by Greg KH. Also switched to using scnprintf instead of snprintf per Documentation/filesystems/sysfs.txt. Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Shane Seymour <shane.seymour@hp.com> Reviewed-by:
-
linux authored
Support HighPoint RR36xx HBAs which are based on Marvell Frey. Support SAS tape and SAS media changer. [jejb: remove now unused label] Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Reviewed-by:
-
Seymour, Shane M authored
This patch changes the st driver to use attribute groups so driver sysfs files are created automatically. See the following for reference: http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/Signed-off-by:
-
Alexey Khoroshilov authored
Resources allocated within bfad_im_port_index idr are not deallocated on module unload. The patch adds idr_destroy() in exit function. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Reviewed-by:
-
Bart Van Assche authored
Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
-
Johannes Thumshirn authored
In case pci_resource_start() or pci_resource_len() reutrn 0, mvsas_ioremap returns without doing an iounmap() of mvi->regs_ex. Found by the cocinelle tool. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Commit f3ddac19 ("[SCSI] qla2xxx: Disable adapter when we encounter a PCI disconnect.") has introduced a code that disables the board, releasing some resources, when reading 0xffffffff. In case this happens when there is an EEH, this read will trigger EEH detection and set PCI channel offline. EEH will be able to recover the card from this state by doing a reset, so it's a better option than simply disabling the card. Since eeh_check_failure will mark the channel as offline before returning the read value, in case there really was an EEH, we can simply check for pci_channel_offline, preventing the board_disable code from running if it's true. Without this patch, EEH code will try to access those same resources that board_disable will try to free. This race can cause EEH recovery to fail. [ 504.370577] EEH: Notify device driver to resume [ 504.370580] qla2xxx [0001:07:00.0]-9002:2: The device failed to resume I/O from slot/link_reset. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by:
-
Suresh Thiagarajan authored
Signed-off-by:
Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by:
Viswas G <Viswas.G@pmcs.com> Acked-by:
Jack Wang <xjtuwjp@gmail.com> Signed-off-by:
-
- 31 Jul, 2015 1 commit
-
-
Matthew R. Ochs authored
SCSI device driver to support filesystem access on the IBM CXL Flash adapter. Supported-by:
Stephen Bates <stephen.bates@pmcs.com> Reviewed-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
- 30 Jul, 2015 10 commits
-
-
Dan Carpenter authored
The string "cmd %d RESET FAILED, new lockup detected" is not quite large enough so the sprintf() will overflow. I have increased the size of the buffer and also changed the sprintf calls to snprintf. Fixes: 73153fe5 ('hpsa: use block layer tag for command allocation') Signed-off-by:
Don Brace <don.brace@pmcs.com> Signed-off-by:
-
Chris Leech authored
The iSCSI session recovery_tmo setting is writeable in sysfs, but it's also set every time a connection is established when parameters are set from iscsid over netlink. That results in the timeout being reset to the default value after every recovery. The DM multipath tools want to use the sysfs interface to lower the default timeout when there are multiple paths to fail over. It has caused confusion that we have a writeable sysfs value that seem to keep resetting itself. This patch adds an in-kernel flag that gets set once a sysfs write occurs, and then ignores netlink parameter setting once it's been modified via the sysfs interface. My thinking here is that the sysfs interface is much simpler for external tools to influence the session timeout, but if we're going to allow it to be modified directly we should ensure that setting is maintained. Signed-off-by:
Chris Leech <cleech@redhat.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Brian King authored
Signed-off-by:
-
Brian King authored
Some misc fixes for endianness checking with sparse so sparse with endian checking now runs clean. Fixes a minor bug in the process which was uncovered by sparse which would result in unnecessary error recovery for check conditions. Signed-off-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
-
Wen Xiong authored
On LE system, users see the wrong device_id attribute. This patch does necessary byte swapping for device_id attribute and works on both of LE and BE systems. Signed-off-by:
-
Hannes Reinecke authored
The 'sd' driver is calling scsi_mode_sense() to figure out internal details. But scsi_mode_sense() never checks for any pending unit attentions, so we're getting annoying error messages like: MODE SENSE: unimplemented page/subpage: 0x00/0x00 and a possible wrong decision for device cache handling. Reviewed-by:
-
Tony Battersby authored
Fix a memory leak with scsi-mq triggered by commands with large data transfer length. __sg_alloc_table() sets both table->nents and table->orig_nents to the same value. When the scatterlist is DMA-mapped, table->nents is overwritten with the (possibly smaller) size of the DMA-mapped scatterlist, while table->orig_nents retains the original size of the allocated scatterlist. scsi_free_sgtable() should therefore check orig_nents instead of nents, and all code that initializes sdb->table without calling __sg_alloc_table() should set both nents and orig_nents. Fixes: d285203c ("scsi: add support for a blk-mq based I/O path.") Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Brian King authored
Fixes another signed / unsigned array indexing bug in the ipr driver. Currently, when hrrq_index wraps, it becomes a negative number. We do the modulo, but still have a negative number, so we end up indexing backwards in the array. Given where the hrrq array is located in memory, we probably won't actually reference memory we don't own, but nonetheless ipr is still looking at data within struct ipr_ioa_cfg and interpreting it as struct ipr_hrr_queue data, so bad things could certainly happen. Each ipr adapter has anywhere from 1 to 16 HRRQs. By default, we use 2 on new adapters. Let's take an example: Assume ioa_cfg->hrrq_index=0x7fffffffe and ioa_cfg->hrrq_num=4: The atomic_add_return will then return -1. We mod this with 3 and get -2, add one and get -1 for an array index. On adapters which support more than a single HRRQ, we dedicate HRRQ to adapter initialization and error interrupts so that we can optimize the other queues for fast path I/O. So all normal I/O uses HRRQ 1-15. So we want to spread the I/O requests across those HRRQs. With the default module parameter settings, this bug won't hit, only when someone sets the ipr.number_of_msix parameter to a value larger than 3 is when bad things start to happen. Cc: <stable@vger.kernel.org> Tested-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Brian King authored
When ipr's internal driver trace was changed to an atomic, a signed/unsigned bug slipped in which results in us indexing backwards in our memory buffer writing on memory that does not belong to us. This patch fixes this by removing the modulo and instead just mask off the low bits. Cc: <stable@vger.kernel.org> Tested-by:
-
Brian King authored
Make sure we have the host lock held when calling scsi_report_bus_reset. Fixes a crash seen as the __devices list in the scsi host was changing as we were iterating through it. Cc: <stable@vger.kernel.org> Reviewed-by:
-
- 16 Jul, 2015 2 commits
-
-
Jens Axboe authored
Commit 1e6f2416 changed the scsi sysfs 'queue_depth' code to rejects depths higher than the scsi host template setting. But lots of hosts set this to 1, and update the settings in the scsi host when the controller/devices probing happens. This breaks (at least) mpt2sas and mpt3sas runtime setting of queue depth, returning EINVAL for all settings but '1'. And once it's set to 1, there's no way to go back up. Cc: stable@vger.kernel.org Fixes: 1e6f2416 "scsi: don't allow setting of queue_depth bigger than can_queue" Signed-off-by:
Jens Axboe <axboe@fb.com> Reviewed-by:
-
Seymour, Shane M authored
Two SLES11 SP3 servers encountered similar crashes simultaneously following some kind of SAN/tape target issue: ... qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-801c:3: Abort command issued nexus=3:0:2 -- 1 2002. qla2xxx [0000:81:00.0]-8009:3: DEVICE RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: DEVICE RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8009:3: TARGET RESET ISSUED nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800c:3: do_reset failed for cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-800f:3: TARGET RESET FAILED: Task management failed nexus=3:0:2 cmd=ffff882f89c2c7c0. qla2xxx [0000:81:00.0]-8012:3: BUS RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-802b:3: BUS RESET SUCCEEDED nexus=3:0:2. qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8018:3: ADAPTER RESET ISSUED nexus=3:0:2. qla2xxx [0000:81:00.0]-00af:3: Performing ISP error recovery - ha=ffff88bf04d18000. rport-3:0-0: blocked FC remote port time out: removing target and saving binding qla2xxx [0000:81:00.0]-505f:3: Link is operational (8 Gbps). qla2xxx [0000:81:00.0]-8017:3: ADAPTER RESET SUCCEEDED nexus=3:0:2. rport-2:0-0: blocked FC remote port time out: removing target and saving binding sg_rq_end_io: device detached BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 IP: [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 PGD 7e6586f067 PUD 7e5af06067 PMD 0 [1739975.390354] Oops: 0002 [#1] SMP CPU 0 ... Supported: No, Proprietary modules are loaded [1739975.390463] Pid: 27965, comm: ABCD Tainted: PF X 3.0.101-0.29-default #1 HP ProLiant DL580 Gen8 RIP: 0010:[<ffffffff8133b268>] [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 RSP: 0018:ffff8839dc1e7c68 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff883f0592fc00 RCX: 0000000000000090 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000138 RBP: 0000000000000138 R08: 0000000000000010 R09: ffffffff81bd39d0 R10: 00000000000009c0 R11: ffffffff81025790 R12: 0000000000000001 R13: ffff883022212b80 R14: 0000000000000004 R15: ffff883022212b80 FS: 00007f8e54560720(0000) GS:ffff88407f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000002a8 CR3: 0000007e6ced6000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ABCD (pid: 27965, threadinfo ffff8839dc1e6000, task ffff883592e0c640) Stack: ffff883f0592fc00 00000000fffffffa 0000000000000001 ffff883022212b80 ffff883eff772400 ffffffffa03fa309 0000000000000000 0000000000000000 ffffffffa04003a0 ffff883f063196c0 ffff887f0379a930 ffffffff8115ea1e Call Trace: [<ffffffffa03fa309>] st_open+0x129/0x240 [st] [<ffffffff8115ea1e>] chrdev_open+0x13e/0x200 [<ffffffff811588a8>] __dentry_open+0x198/0x310 [<ffffffff81167d74>] do_last+0x1f4/0x800 [<ffffffff81168fe9>] path_openat+0xd9/0x420 [<ffffffff8116946c>] do_filp_open+0x4c/0xc0 [<ffffffff8115a00f>] do_sys_open+0x17f/0x250 [<ffffffff81468d92>] system_call_fastpath+0x16/0x1b [<00007f8e4f617fd0>] 0x7f8e4f617fcf Code: eb d3 90 48 83 ec 28 40 f6 c6 04 48 89 6c 24 08 4c 89 74 24 20 48 89 fd 48 89 1c 24 4c 89 64 24 10 41 89 f6 4c 89 6c 24 18 74 11 <f0> ff 8f 70 01 00 00 0f 94 c0 45 31 ed 84 c0 74 2b 4c 8d a5 a0 RIP [<ffffffff8133b268>] __pm_runtime_idle+0x28/0x90 RSP <ffff8839dc1e7c68> CR2: 00000000000002a8 Analysis reveals the cause of the crash to be due to STp->device being NULL. The pointer was NULLed via scsi_tape_put(STp) when it calls scsi_tape_release(). In st_open() we jump to err_out after scsi_block_when_processing_errors() completes and returns the device as offline (sdev_state was SDEV_DEL): 1180 /* Open the device. Needs to take the BKL only because of incrementing the SCSI host 1181 module count. */ 1182 static int st_open(struct inode *inode, struct file *filp) 1183 { 1184 int i, retval = (-EIO); 1185 int resumed = 0; 1186 struct scsi_tape *STp; 1187 struct st_partstat *STps; 1188 int dev = TAPE_NR(inode); 1189 char *name; ... 1217 if (scsi_autopm_get_device(STp->device) < 0) { 1218 retval = -EIO; 1219 goto err_out; 1220 } 1221 resumed = 1; 1222 if (!scsi_block_when_processing_errors(STp->device)) { 1223 retval = (-ENXIO); 1224 goto err_out; 1225 } ... 1264 err_out: 1265 normalize_buffer(STp->buffer); 1266 spin_lock(&st_use_lock); 1267 STp->in_use = 0; 1268 spin_unlock(&st_use_lock); 1269 scsi_tape_put(STp); <-- STp->device = 0 after this 1270 if (resumed) 1271 scsi_autopm_put_device(STp->device); 1272 return retval; The ref count for the struct scsi_tape had already been reduced to 1 when the .remove method of the st module had been called. The kref_put() in scsi_tape_put() caused scsi_tape_release() to be called: 0266 static void scsi_tape_put(struct scsi_tape *STp) 0267 { 0268 struct scsi_device *sdev = STp->device; 0269 0270 mutex_lock(&st_ref_mutex); 0271 kref_put(&STp->kref, scsi_tape_release); <-- calls this 0272 scsi_device_put(sdev); 0273 mutex_unlock(&st_ref_mutex); 0274 } In scsi_tape_release() the struct scsi_device in the struct scsi_tape gets set to NULL: 4273 static void scsi_tape_release(struct kref *kref) 4274 { 4275 struct scsi_tape *tpnt = to_scsi_tape(kref); 4276 struct gendisk *disk = tpnt->disk; 4277 4278 tpnt->device = NULL; <<<---- where the dev is nulled 4279 4280 if (tpnt->buffer) { 4281 normalize_buffer(tpnt->buffer); 4282 kfree(tpnt->buffer->reserved_pages); 4283 kfree(tpnt->buffer); 4284 } 4285 4286 disk->private_data = NULL; 4287 put_disk(disk); 4288 kfree(tpnt); 4289 return; 4290 } Although the problem was reported on SLES11.3 the problem appears in linux-next as well. The crash is fixed by reordering the code so we no longer access the struct scsi_tape after the kref_put() is done on it in st_open(). Signed-off-by:Darren Lavender <darren.lavender@hp.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.com> Acked-by:
-
- 12 Jul, 2015 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by:
Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename. -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27 -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
-
Al Viro authored
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by:J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By:
Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By:
-
