- 20 Jun, 2011 18 commits
-
-
Richard Cochran authored
Ethernet MAC drivers based on phylib (but not using NAPI) can enable hardware time stamping in phy devices by calling netif_rx() conditionally based on a call to skb_defer_rx_timestamp(). This commit exports that function so that drivers calling it may be compiled as modules. Signed-off-by:
Richard Cochran <richard.cochran@omicron.at> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
stats_lock is non useless, lets remove it. Also, ndo_get_stats64() doesnt have to clear the stats, caller takes care of this. Note: folding 32bit fields in 64bit one is problematic when one of 32bit values wraps : SNMP reader will see a ~2^32 back change in a 64bit value. A future patch should fix this. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Andrew Gallatin <gallatin@myri.com> CC: Brice Goglin <brice@myri.com> Acked-by:
Jon Mason <mason@myri.com> Signed-off-by:
-
-
Jon Mason authored
Remove the myri_sbus driver. Why? * There is no possibility of ethernet mode on this adapter, so it's Myrinet only. * It won't inter-op with modern versions of Myrinet, and thus can only work with legacy adapters. * There are no in-kernel Linux drivers for the PCI version of this adapter, so it only can work on ~15 year old Sun hardware. It's long in the tooth, let's take it to the knackers. Signed-off-by:
-
Antonio Quartulli authored
If a client issues a DHCPREQUEST for renewal, the packet is dropped if the old destination (the old gateway for the client) TQ is smaller than the current best gateway TQ less GW_THRESHOLD Signed-off-by:
Antonio Quartulli <ordex@autistici.org> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Sven Eckelmann <sven@narfation.org>
-
Antonio Quartulli authored
In case of new default gw, changing the default gw or deleting the default gw a uevent is triggered with type=gw, action=add/change/del and data={GW_ORIG_ADDRESS} (if any). Signed-off-by: -
Antonio Quartulli authored
The gateway election mechanism has been a little revised. Now the gw_election is trigered by an atomic_t flag (gw_reselect) which is set to 1 in case of election needed, avoding to set curr_gw to NULL. Signed-off-by:
-
Antonio Quartulli authored
Using throw_uevent() is now possible to trigger uevent signal that can be recognised in userspace. Uevents will be triggered through the /devices/virtual/net/{MESH_IFACE} kobject. A triggered uevent has three properties: - type: the event class. Who generates the event (only 'gw' is currently defined). Corresponds to the BATTYPE uevent variable. - action: the associated action with the event ('add'/'change'/'del' are currently defined). Corresponds to the BATACTION uevent variable. - data: any useful data for the userspace. Corresponds to the BATDATA uevent variable. Signed-off-by: -
Antonio Quartulli authored
The local and the global translation-tables are now lock free and rcu protected. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
Antonio Quartulli authored
With the current client announcement implementation, in case of roaming, an update is triggered on the new AP serving the client. At that point the new information is spread around by means of the OGM broadcasting mechanism. Until this operations is not executed, no node is able to correctly route traffic towards the client. This obviously causes packet drops and introduces a delay in the time needed by the client to recover its connections. A new packet type called ROAMING_ADVERTISEMENT is added to account this issue. This message is sent in case of roaming from the new AP serving the client to the old one and will contain the client MAC address. In this way an out-of-OGM update is immediately committed, so that the old node can update its global translation table. Traffic reaching this node will then be redirected to the correct destination utilising the fresher information. Thus reducing the packet drops and the connection recovery delay. Signed-off-by:
-
Antonio Quartulli authored
The client announcement mechanism informs every mesh node in the network of any connected non-mesh client, in order to find the path towards that client from any given point in the mesh. The old implementation was based on the simple idea of appending a data buffer to each OGM containing all the client MAC addresses the node is serving. All other nodes can populate their global translation tables (table which links client MAC addresses to node addresses) using this MAC address buffer and linking it to the node's address contained in the OGM. A node that wants to contact a client has to lookup the node the client is connected to and its address in the global translation table. It is easy to understand that this implementation suffers from several issues: - big overhead (each and every OGM contains the entire list of connected clients) - high latencies for client route updates due to long OGM trip time and OGM losses The new implementation addresses these issues by appending client changes (new client joined or a client left) to the OGM instead of filling it with all the client addresses each time. In this way nodes can modify their global tables by means of "updates", thus reducing the overhead within the OGMs. To keep the entire network in sync each node maintains a translation table version number (ttvn) and a translation table checksum. These values are spread with the OGM to allow all the network participants to determine whether or not they need to update their translation table information. When a translation table lookup is performed in order to send a packet to a client attached to another node, the destination's ttvn is added to the payload packet. Forwarding nodes can compare the packet's ttvn with their destination's ttvn (this node could have a fresher information than the source) and re-route the packet if necessary. This greatly reduces the packet loss of clients roaming from one AP to the next. Signed-off-by:
-
Antonio Quartulli authored
The amount of duplicated code in the receive and routing code can be reduced when all headers provide the packet type, version and ttl in the same first bytes. Signed-off-by:
-
Sven Eckelmann authored
char was used in different places to store information without really using the characteristics of that data type or by ignoring the fact that char has not a well defined signedness. Signed-off-by: -
David Howells authored
count_real_packets() in batman-adv assumes char is signed, and returns -1 through it: net/batman-adv/routing.c: In function 'receive_bat_packet': net/batman-adv/routing.c:739: warning: comparison is always false due to limited range of data type Use int instead. Signed-off-by:
David Howells <dhowells@redhat.com> [sven@narfation.org: Rebase on top of current version] Signed-off-by:
-
Sven Eckelmann authored
interface_tx is not used outside of soft-interface.c and thus doesn't need to be declared inside soft-interface.h Signed-off-by: -
Sven Eckelmann authored
compare_orig is only used in context of orig_node which is managed inside originator.c. It is not necessary to keep that function inside the header originator.h. Signed-off-by: -
Eric Dumazet authored
Using 64bit stats on 32bit arches must use a synchronization or readers can get transient values. Fixes bug introduced in commit 6311cc44 (veth: convert to 64 bit statistics) Signed-off-by:
-
Stephen Rothwell authored
Made necessary by commit a6b7a407 ("net: remove interrupt.h inclusion from netdevice.h"). Fixes these build errors: drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1212:3: error: implicit declaration of function 'in_interrupt' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1390:4: error: implicit declaration of function 'tasklet_schedule' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1988:3: error: implicit declaration of function 'tasklet_init' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:2288:5: error: implicit declaration of function 'tasklet_kill' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:232:24: error: field 'tasklet' has incomplete type drivers/staging/brcm80211/brcmfmac/wl_iw.c:3670:2: error: implicit declaration of function 'in_interrupt' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1349:3: error: implicit declaration of function 'free_irq' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1352:2: error: implicit declaration of function 'tasklet_kill' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1538:4: error: implicit declaration of function 'tasklet_schedule' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:765:2: error: implicit declaration of function 'tasklet_init' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:817:2: error: implicit declaration of function 'request_irq' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:817:31: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/brcm80211/brcmsmac/wl_mac80211.h:65:24: error: field 'tasklet' has incomplete type drivers/staging/rtl8187se/ieee80211/ieee80211.h:994:24: error: field 'ps_task' has incomplete type drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:1790:3: error: implicit declaration of function 'tasklet_schedule' drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:2590:2: error: implicit declaration of function 'tasklet_init' drivers/staging/rtl8187se/r8180.h:461:24: error: field 'irq_rx_tasklet' has incomplete type drivers/staging/rtl8187se/r8180_core.c:2764:2: error: implicit declaration of function 'tasklet_init' drivers/staging/rtl8187se/r8180_core.c:2954:2: error: implicit declaration of function 'request_irq' drivers/staging/rtl8187se/r8180_core.c:2954:55: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/rtl8187se/r8180_core.c:3641:4: error: implicit declaration of function 'free_irq' drivers/staging/rtl8187se/r8180_core.c:4026:3: error: implicit declaration of function 'tasklet_schedule' drivers/staging/rtl8192e/ieee80211/ieee80211.h:2000:24: error: field 'ps_task' has incomplete type drivers/staging/rtl8192e/r8192E.h:909:24: error: field 'irq_rx_tasklet' has incomplete type drivers/staging/rtl8192e/r8192E.h:910:24: error: field 'irq_tx_tasklet' has incomplete type drivers/staging/rtl8192e/r8192E.h:911:31: error: field 'irq_prepare_beacon_tasklet' has incomplete type drivers/staging/rtl8192e/r8192E_core.c:2008:2: error: implicit declaration of function 'tasklet_init' drivers/staging/rtl8192e/r8192E_core.c:2412:54: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/rtl8192e/r8192E_core.c:2412:9: error: implicit declaration of function 'request_irq' drivers/staging/rtl8192e/r8192E_core.c:4640:4: error: implicit declaration of function 'free_irq' drivers/staging/rtl8192e/r8192E_core.c:620:2: error: implicit declaration of function 'synchronize_irq' drivers/staging/rtl8192e/r8192E_core.c:913:3: error: implicit declaration of function 'tasklet_schedule' drivers/staging/rtl8192u/ieee80211/ieee80211.h:1993:24: error: field 'ps_task' has incomplete type Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 19 Jun, 2011 7 commits
-
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
Signed-off-by:
-
Richard Cochran authored
The comment for the skb_tx_timestamp() function suggests calling it just after a buffer is released to the hardware for transmission. However, for drivers that free the buffer in an ISR, this produces a race between the time stamp code and the ISR. This commit changes the comment to advise placing the call just before handing the buffer over to the hardware. Signed-off-by:
-
- 18 Jun, 2011 3 commits
-
-
Francois Romieu authored
Firmware checking is only performed when the firmware is loaded instead of each time the driver inits the phy. Signed-off-by:Francois Romieu <romieu@fr.zoreil.com>
-
Hayes Wang authored
The new firmware format adds versioning as firmware for a specific chipset appears to be subject to change. Current "legacy" format is still supported. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
Francois Romieu authored
Signed-off-by:
-
- 17 Jun, 2011 9 commits
-
-
Francois Romieu authored
No functional difference. Signed-off-by: -
Greg Dietsche authored
Compile tested. remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by:
Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by:
David S. Miller <davem@conan.davemloft.net>
-
Greg Dietsche authored
Compile tested. remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited() Signed-off-by:
Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de> Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited(). Signed-off-by:
-
Dan Carpenter authored
In c7ac8679 "rtnetlink: Compute and store minimum ifinfo dump size", we moved the allocation under the lock so we need to unlock on error path. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Joe Perches authored
Use the current logging styles. Add #define DEBUG to get same output for <foo>_dbg messages. Convert a few bare printks to pr_err. Fix a likely copy/paste defect where a test was done with RX values: if (num_rx_qs > MAX_RX_QS) { but TX limits were emitted: printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n", num_tx_qs, MAX_TX_QS); Signed-off-by:Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script: $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by:
Paul Moore <paul.moore@hp.com> Signed-off-by:
-
Sathya Perla authored
This patch provides support for multiple TX queues. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
- 16 Jun, 2011 3 commits
-
-
Jozsef Kadlecsik authored
Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
The hash:net,iface type makes possible to store network address and interface name pairs in a set. It's mostly suitable for egress and ingress filtering. Examples: # ipset create test hash:net,iface # ipset add test 192.168.0.0/16,eth0 # ipset add test 192.168.0.0/24,eth1 Signed-off-by: -
Jozsef Kadlecsik authored
Signed-off-by:
-
