- 30 May, 2007 11 commits
-
-
Thomas Gleixner authored
The -rt patch triggered a lockdep warning in the amba serial drivers, which never shows up on UP kernels. On SMP systems this would trigger as well. Release the port lock before calling tty_flip_buffer_push() and reacquire it after the call. This matches the code in the 8250 serial driver. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Catalin Marinas authored
We are currently using the ARMv6 operations but need to duplicate some of the code because of the introduction of the new CPU barrier instructions in ARMv7. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Michael-Luke Jones authored
This patch removes apparently unnecessary extern declarations in coyote-pci.c and ixdpg425-pci.c within arch/arm/mach-ixp4xx and has been compile-tested without producing warnings or errors. Kernel coding style forbids the use of extern declarations within .c files. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Fix the undeclared symbols sparse is warning about. arch/arm/nwfpe/softfloat.c:1727:7: warning: symbol 'float64_to_uint32' was not declared. Should it be static? arch/arm/nwfpe/softfloat.c:1753:7: warning: symbol 'float64_to_uint32_round_to_zero' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
The map_io function does not need to be exported from this file, and therefore should be declared static. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Fix sparse warnings in the arch/arm/mach-s3c2443/clock.c, including an bug in initialising the cf clock initialiser where two values are being set for the ctrlbit. arch/arm/mach-s3c2443/clock.c:397:12: warning: symbol 'clk_usb_bus_host' was not declared. Should it be static? arch/arm/mach-s3c2443/clock.c:760:4: error: Initializer entry defined twice arch/arm/mach-s3c2443/clock.c:761:4: also defined here Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
The S3C2412 has an reset-errata where the clock may cause a glitch switching back to EXTCLK. We force a switch to EXTCLK before writing the reset register to force use of the CLKCON sync logic to properly switch. Fix problem reported by Matthieu Castet. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Victor authored
Fix a error reported by newer versions of GCC. error: static declaration of 'ks8695_reg' follows non-static declaration Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Fix lockdep warnings, caused by 'set_affinity' being called without the correct locks taken and local interrupts disabled: ================================= [ INFO: inconsistent lock state ] 2.6.22-rc2 #1 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes: (irq_controller_lock){++..}, at: [<c002be50>] gic_set_cpu+0x60/0xa0 {in-hardirq-W} state was registered at: [<c005d9a8>] lock_acquire+0x58/0x6c [<c0233068>] _spin_lock+0x40/0x50 [<c002c020>] gic_mask_irq+0x2c/0x6c [<c0069c64>] handle_level_irq+0x11c/0x14c [<c0020060>] asm_do_IRQ+0x60/0x84 [<c0020d2c>] __irq_svc+0x4c/0xc0 [<c000ed84>] __alloc_bootmem_nopanic+0x74/0x88 [<c000edb0>] __alloc_bootmem+0x18/0x3c [<c000fa00>] alloc_large_system_hash+0x16c/0x200 [<c00108dc>] inode_init_early+0x5c/0xa4 [<c00106dc>] vfs_caches_init_early+0x24/0xa0 [<c0008e54>] start_kernel+0x220/0x2fc [<00008078>] 0x8078 irq event stamp: 88438 hardirqs last enabled at (88438): [<c0020dc0>] preempt_return+0x20/0x2c hardirqs last disabled at (88436): [<c00417bc>] __do_softirq+0xb0/0x138 softirqs last enabled at (88437): [<c0041810>] __do_softirq+0x104/0x138 softirqs last disabled at (88428): [<c0041d9c>] irq_exit+0x68/0x7c other info that might help us debug this: no locks held by swapper/1. stack backtrace: [<c0025ecc>] (dump_stack+0x0/0x14) from [<c005b1e4>] (print_usage_bug+0x138/0x168) [<c005b0ac>] (print_usage_bug+0x0/0x168) from [<c005be80>] (mark_lock+0x484/0x6a0) [<c005b9fc>] (mark_lock+0x0/0x6a0) from [<c005cc48>] (__lock_acquire+0x3c0/0x10c8) [<c005c888>] (__lock_acquire+0x0/0x10c8) from [<c005d9a8>] (lock_acquire+0x58/0x6c) [<c005d950>] (lock_acquire+0x0/0x6c) from [<c0233068>] (_spin_lock+0x40/0x50) [<c0233028>] (_spin_lock+0x0/0x50) from [<c002be50>] (gic_set_cpu+0x60/0xa0) [<c002bdf0>] (gic_set_cpu+0x0/0xa0) from [<c01b04cc>] (em_route_irq+0x38/0x40) [<c01b0494>] (em_route_irq+0x0/0x40) from [<c01b04ec>] (em_setup+0x18/0xa4) [<c01b04d4>] (em_setup+0x0/0xa4) from [<c001570c>] (oprofile_arch_init+0x24/0xe8) [<c00156e8>] (oprofile_arch_init+0x0/0xe8) from [<c0015640>] (oprofile_init+0x1c/0x64) [<c0015624>] (oprofile_init+0x0/0x64) from [<c0008a20>] (kernel_init+0x154/0x368) [<c00088cc>] (kernel_init+0x0/0x368) from [<c003ef34>] (do_exit+0x0/0x904) oprofile: using arm/mpcore Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Fix an oops in the stacktrace code, caused by improper range checking. We subtract 12 off 'fp' before testing to see if it's below the low bound. However, if 'fp' were zero before, it becomes a very large positive number, causing this test to succeed where it should fail. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
David Rientjes authored
Use the newly introduced __used attribute in place of the deprecated __attribute_used__. Functionally the same. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 28 May, 2007 1 commit
-
-
Alan Cox authored
Add the ioctls and values needed for this to the ARM26/ARM32 ports. The actual code has been in the base kernel for a while and automatically turns on when a port sets the required defines. [RMK: also added termbits.h changes to avoid build breakage] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 26 May, 2007 9 commits
-
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Michael-Luke Jones authored
This trivial patch updates the nslu2 and nas-100d headers to remove pointless GPIO defines, and updates nslu2-setup.c accordingly. In addition minor style cleanups to some comments are included. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Michael-Luke Jones authored
This patch is required as the frequency fixup in nslu2_init does not run sufficiently early in the boot sequence to take effect. In addition the dsmg600 setup code behaviour has been improved such that a 'fixup' routine is avoided. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Michael-Luke Jones authored
Avila and IXDP4xx support were separated in 2.6.21 so this comment isn't correct any more. Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Enrico Scholz authored
Using lockdep validator causes warnings like INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<c00241a0>] (dump_stack+0x0/0x14) from [<c00520f8>] (__lock_acquire+0x150/0xc40) [<c0051fa8>] (__lock_acquire+0x0/0xc40) from [<c00530a0>] (lock_acquire+0x5c/0x70) [<c0053044>] (lock_acquire+0x0/0x70) from [<c01d9e44>] (_spin_lock_irq+0x48/0x58) r7:c07e5144 r6:00000000 r5:c015fb94 r4:c07e50b8 [<c01d9dfc>] (_spin_lock_irq+0x0/0x58) from [<c015fb94>] (i2c_pxa_xfer+0x110/0x2e0) r5:c07e50b8 r4:0000001f This is caused by memcpy'ing a statical initialized spin-lock. This patch removes a static pxa_i2c structure which was used only as a source for this memcpy() operation. Instead of, members and the spinlock will be initialized manually. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Add physical address of HSMMC to include/asm-arm/arch-s3c2410/map.h Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ben Dooks authored
Add definitions for S3C2443 functions in GPIOJ Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
It's that time of the year again. Summer starts in the US, and people want to sit at the beach with a new -rc candidate. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Why is it that since the 2f1a2ccb console UTF-8 fixes went into 2.6.22-rc1, the PowerMac G5 shows only inverse video question marks for the text on tty2-6? whereas tty1 is fine, and so is x86. No fault of that patch: by removing the old fallback behaviour, it reveals that 32-bit setfont running on 64-bit kernels has only really worked on the current console, the rest getting faked by that inadequate fallback. Bring the compat do_unimap_ioctl into line with the main one: PIO_UNIMAP and GIO_UNIMAP apply to the specified tty, not redirected to fg_console. Use the same checks, and most particularly, remember to check access_ok: con_set_unimap and con_get_unimap are using __get_user and __put_user. And the compat vt_check should ask for the same capability as the main one, CAP_SYS_TTY_CONFIG rather than CAP_SYS_ADMIN. Added in vt_ioctl's vc_cons_allocated check for safety, though failure may well be impossible. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 May, 2007 19 commits
-
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB/cm: Drain cq in ipoib_cm_dev_stop() IPoIB/cm: Fix timeout check in ipoib_cm_dev_stop() IB/ehca: Fix number of send WRs reported for new QP IB/mlx4: Initialize send queue entry ownership bits IB/mlx4: Don't allocate RQ doorbell if using SRQ
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_hpt37x: Further improvements based on the IDE updates and vendor drivers pata: Trivia [libata] sata_via, pata_via: Add PCI IDs. [libata] Fix decoding of 6-byte commands libata: sata_sis fixes Fix build failure for drivers/ata/pata_scc.c [libata] sata_mv: add TODO list [libata] sata_promise: fix flags typo
-
Alan Cox authored
Better DPLL use and calibration Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Alan Cox authored
Typo/comment fixes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Christoph Hellwig authored
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
We weren't cleaning up our inode reference on error in ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if need be. Move the code to set the alloc context inode info to the end of the function so we don't have any possibility of passing back a bad pointer. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Nate Diller authored
Use zero_user_page() instead of open-coding it. Signed-off-by: Nate Diller <nate.diller@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
We weren't calling this before, but since ocfs2 handles the entire truncate operation, we should. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Mark Fasheh authored
Similarly to the page lock / cluster lock inversion in ocfs2_readpage, we can deadlock on ip_alloc_sem. We can down_read_trylock() instead and just return AOP_TRUNCATED_PAGE if the operation fails. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
-
Jeff Garzik authored
Supplied by VIA. Also, convert named constants to hex values in the pata_via PCI ID table. (standard libata policy for PCI device IDs, which are considered simply arbitrary hex numbers, without a need to create a single-use constant in linux/pci_ids.h) Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
The code for parsing 6-byte SCSI command LBAs missed the top 5 bits (the MSB). Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Uwe Koziolek authored
The sata_sis driver supports SATA and PATA ports. The broken support of both types in one controller is fixed. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tony Breeds authored
The commit d4b2bab4 added deadline support to prereset and reset methods to libbata the pata_scc driver wasn't converted. This patch is a naive attempt to bring this driver up to scratch. Build failures are: drivers/ata/pata_scc.c: In function 'scc_pata_prereset': drivers/ata/pata_scc.c:870: error: too few arguments to function 'ata_std_prereset' drivers/ata/pata_scc.c: In function 'scc_error_handler': drivers/ata/pata_scc.c:916: warning: passing argument 2 of 'ata_bmdma_drive_eh' from incompatible pointer type drivers/ata/pata_scc.c:916: warning: passing argument 3 of 'ata_bmdma_drive_eh' from incompatible pointer type drivers/ata/pata_scc.c: In function 'scc_pata_prereset': drivers/ata/pata_scc.c:871: warning: control reaches end of non-void function On a releated note scc_bus_post_reset() is (AFACT) identical to ata_bus_post_reset(), would a patch to make ata_bus_post_reset() assesable to drivers be accepted? Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
A stray comma makes all the difference. Change to '|' as these flags should be or'd together. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [XFRM]: Allow packet drops during larval state resolution. [CASSINI]: Check pci_set_mwi() return value. [NET]: "wrong timeout value" in sk_wait_data() v2 [NETFILTER]: nf_nat_h323: call set_h225_addr instead of set_h225_addr_hook [NETFILTER]: nf_conntrack_h323: add missing T.120 address in OLCA [NETFILTER]: nf_conntrack_h323: remove unnecessary process of Information signal [NETFILTER]: nf_conntrack_h323: fix get_h225_addr() for IPv6 address access [NETFILTER]: nf_conntrack_h323: fix ASN.1 types [NETFILTER]: nf_conntrack_ftp: fix newline sequence number calculation [NETFILTER]: nf_conntrack_ftp: fix newline sequence number update [NET_SCHED]: sch_htb: fix event cache time calculation [DCCP]: Fix build warning when debugging is disabled. [TIPC]: Fixed erroneous introduction of for_each_netdev [RTNETLINK]: Fix sending netlink message when replace route. [TR]: Use menuconfig objects. [ARCNET]: Use menuconfig objects. [TIPC]: Use menuconfig objects. [SCTP]: Use menuconfig objects. [IPVS]: Use menuconfig objects. [DCCP]: Use menuconfig objects. ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_via: Handle laptops via DMI libata: -ENODEV during prereset isn't an error libata: don't consider 0xff as port empty if SStatus is available ata_piix: add short 40c quirk for Acer Aspire 2030, take #2 pata_sis: Fix and clean up some timing setups hpt3x2n: Correct revision boundary
-
David S. Miller authored
The current IPSEC rule resolution behavior we have does not work for a lot of people, even though technically it's an improvement from the -EAGAIN buisness we had before. Right now we'll block until the key manager resolves the route. That works for simple cases, but many folks would rather packets get silently dropped until the key manager resolves the IPSEC rules. We can't tell these folks to "set the socket non-blocking" because they don't have control over the non-block setting of things like the sockets used to resolve DNS deep inside of the resolver libraries in libc. With that in mind I coded up the patch below with some help from Herbert Xu which provides packet-drop behavior during larval state resolution, controllable via sysctl and off by default. This lays the framework to either: 1) Make this default at some point or... 2) Move this logic into xfrm{4,6}_policy.c and implement the ARP-like resolution queue we've all been dreaming of. The idea would be to queue packets to the policy, then once the larval state is resolved by the key manager we re-resolve the route and push the packets out. The packets would timeout if the rule didn't get resolved in a certain amount of time. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-