- 18 Jan, 2016 11 commits
-
-
Alan Stern authored
commit ad87e032 upstream. Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Mathias Nyman authored
commit f69115fd upstream. According to USB 2 specs ports need to signal resume for at least 20ms, in practice even longer, before moving to U0 state. Both host and devices can initiate resume. On device initiated resume, a port status interrupt with the port in resume state in issued. The interrupt handler tags a resume_done[port] timestamp with current time + USB_RESUME_TIMEOUT, and kick roothub timer. Root hub timer requests for port status, finds the port in resume state, checks if resume_done[port] timestamp passed, and set port to U0 state. On host initiated resume, current code sets the port to resume state, sleep 20ms, and finally sets the port to U0 state. This should also be changed to work in a similar way as the device initiated resume, with timestamp tagging, but that is not yet tested and will be a separate fix later. There are a few issues with this approach 1. A host initiated resume will also generate a resume event. The event handler will find the port in resume state, believe it's a device initiated resume, and act accordingly. 2. A port status request might cut the resume signalling short if a get_port_status request is handled during the host resume signalling. The port will be found in resume state. The timestamp is not set leading to time_after_eq(jiffies, timestamp) returning true, as timestamp = 0. get_port_status will proceed with moving the port to U0. 3. If an error, or anything else happens to the port during device initiated resume signalling it will leave all the device resume parameters hanging uncleared, preventing further suspend, returning -EBUSY, and cause the pm thread to busyloop trying to enter suspend. Fix this by using the existing resuming_ports bitfield to indicate that resume signalling timing is taken care of. Check if the resume_done[port] is set before using it for timestamp comparison, and also clear out any resume signalling related variables if port is not in U0 or Resume state This issue was discovered when a PM thread busylooped, trying to runtime suspend the xhci USB 2 roothub on a Dell XPS Reported-by:
Daniel J Blueman <daniel@quora.org> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 9f5bd308 upstream. There are few defects in vga_get() related to signal hadning: - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE case; - if we found pending signal we must remove ourself from wait queue and change task state back to running; - -ERESTARTSYS is more appropriate, I guess. Signed-off-by:
Kirill A. Shutemov <kirill@shutemov.name> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit ed8b45a3 upstream. If dm_btree_del()'s call to push_frame() fails, e.g. due to btree_node_validator finding invalid metadata, the dm_btree_del() error path must unlock all frames (which have active dm-bufio buffers) that were pushed onto the del_stack. Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio buffers have leaked, e.g.: device-mapper: bufio: leaked buffer 3, hold count 1, list 0 Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Jan Stancek authored
commit 27f972d3 upstream. We encountered a panic on boot in ipmi_si on a dell per320 due to an uninitialized timer as follows. static int smi_start_processing(void *send_info, ipmi_smi_t intf) { /* Try to claim any interrupts. */ if (new_smi->irq_setup) new_smi->irq_setup(new_smi); --> IRQ arrives here and irq handler tries to modify uninitialized timer which triggers BUG_ON(!timer->function) in __mod_timer(). Call Trace: <IRQ> [<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si] [<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si] [<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si] [<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350 [<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si] [<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170 [<ffffffff810f245e>] handle_edge_irq+0xde/0x180 [<ffffffff8100fc59>] handle_irq+0x49/0xa0 [<ffffffff8154643c>] do_IRQ+0x6c/0xf0 [<ffffffff8100ba53>] ret_from_intr+0x0/0x11 /* Set up the timer that drives the interface. */ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); The following patch fixes the problem. To: Openipmi-developer@lists.sourceforge.net To: Corey Minyard <minyard@acm.org> CC: linux-kernel@vger.kernel.org Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Tony Camuso <tcamuso@redhat.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Joe Thornber authored
commit 50dd842a upstream. When applying block operations (BOPs) do not remove them from the uncommitted BOP ring-buffer until after they've been applied -- in case we recurse. Also, perform BOP_INC operation, in dm_sm_metadata_create() and sm_metadata_extend(), in terms of the uncommitted BOP ring-buffer rather than using direct calls to sm_ll_inc(). Signed-off-by:
-
Joe Thornber authored
commit 49e99fc7 upstream. When you take a metadata snapshot the btree roots for the mapping and details tree need to have their reference counts incremented so they persist for the lifetime of the metadata snap. The roots being incremented were those currently written in the superblock, which could possibly be out of date if concurrent IO is triggering new mappings, breaking of sharing, etc. Fix this by performing a commit with the metadata lock held while taking a metadata snapshot. Signed-off-by:
-
Takashi Iwai authored
commit 9a811230 upstream. Lenovo Thinkpad T440s suffers from constant background noises, and it seems to be a generic hardware issue on this model: https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440s-speaker-noise/td-p/1339883 As the noise comes from the analog loopback path, disabling the path is the easy workaround. Also, the machine gives significant cracking noises at PM suspend. A workaround found by trial-and-error is to disable the shutup callback currently used for ALC269-variant. This patch addresses these noise issues by introducing a new fixup chain. Although the same workaround might be applicable to other Thinkpad models, it's applied only to T440s (17aa:220c) in this patch, so far, just to be safe (you chicken!). As a compromise, a new model option string "tp440" is provided now, though, so that owners of other Thinkpad models can test it more easily. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=958504Reported-and-tested-by:
Tim Hardeck <thardeck@suse.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Oded Gabbay authored
commit 361c32d3 upstream. This patch makes the VCE IB test pass on Big-Endian systems. It converts to little-endian the contents of the VCE message. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Oded Gabbay authored
commit 687f4b98 upstream. This patch fixes the VCE ring test when running on Big-Endian machines. Every write to the ring needs to be translated to little-endian. Reviewed-by:
-
Oded Gabbay authored
commit 5f3e226f upstream. This patch makes the IB test on the GFX ring pass for CI-based cards installed in Big-Endian machines. Reviewed-by:
-
- 11 Jan, 2016 29 commits
-
-
Al Viro authored
commit 4ad78628 upstream. For block devices the pagecache is associated with the inode on bdevfs, not with the aliasing ones on the mountable filesystems. The latter have its own ->i_data empty and ->i_mapping pointing to the (unique per major/minor) bdevfs inode. That guarantees cache coherence between all block device inodes with the same device number. Eviction of an alias inode has no business trying to evict the pages belonging to bdevfs one; moreover, ->i_mapping is only safe to access when the thing is opened. At the time of ->evict_inode() the victim is definitely *not* opened. We are about to kill the address space embedded into struct inode (inode->i_data) and that's what we need to empty of any pages. 9p instance tries to empty inode->i_mapping instead, which is both unsafe and bogus - if we have several device nodes with the same device number in different places, closing one of them should not try to empty the (shared) page cache. Fortunately, other instances in the tree are OK; they are evicting from &inode->i_data instead, as 9p one should. Reported-by:
"Suzuki K. Poulose" <Suzuki.Poulose@arm.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Hui Wang authored
commit 23adc192 upstream. We have two latest thinkpad laptop models which are all based on the Intel skylake platforms, and all of them have the codec alc293 on them. When the machines boot to the desktop, an greeting dialogue shows up with the notification sound. But on these two models, there is noise with the notification sound. We have 3 SKUs for each of the models, all of them have this problem. So far, this problem is only specific to these two thinkpad models, we did not find this problem on the old thinkpad models with the codec alc293 or alc292. A workaround for this problem is disabling the aamix. BugLink: https://bugs.launchpad.net/bugs/1523517Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Sagi Grimberg authored
commit 09c0c0be upstream. When using work request based memory registration (fast_reg) we must reserve SQ entries for registration and invalidation in addition to send operations. Each IO consumes 3 SQ entries (registration, send, invalidation) so we need to allocate 3x larger send-queue instead of 2x. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Doug Ledford <dledford@redhat.com> [ luis: backported to 3.16: - change function srp_create_target_ib() instead of srp_create_ch_ib() - adjusted context ] Signed-off-by:
-
Trond Myklebust authored
commit 756b9b37 upstream. The NFSv4.1 callback channel is currently broken because the receive message will keep shrinking because the backchannel receive buffer size never gets reset. The easiest solution to this problem is instead of changing the receive buffer, to rather adjust the copied request. Fixes: 38b7631f ("nfs4: limit callback decoding to received bytes") Cc: Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Benjamin Coddington authored
commit 38b7631f upstream. A truncated cb_compound request will cause the client to decode null or data from a previous callback for nfs4.1 backchannel case, or uninitialized data for the nfs4.0 case. This is because the path through svc_process_common() advances the request's iov_base and decrements iov_len without adjusting the overall xdr_buf's len field. That causes xdr_init_decode() to set up the xdr_stream with an incorrect length in nfs4_callback_compound(). Fixing this for the nfs4.1 backchannel case first requires setting the correct iov_len and page_len based on the length of received data in the same manner as the nfs4.0 case. Then the request's xdr_buf length can be adjusted for both cases based upon the remaining iov_len and page_len. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Suman Anna authored
commit c13f99b7 upstream. The virtio core uses a static ida named virtio_index_ida for assigning index numbers to virtio devices during registration. The ida core may allocate some internal idr cache layers and an ida bitmap upon any ida allocation, and all these layers are truely freed only upon the ida destruction. The virtio_index_ida is not destroyed at present, leading to a memory leak when using the virtio core as a module and atleast one virtio device is registered and unregistered. Fix this by invoking ida_destroy() in the virtio core module exit. Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
David Henningsson authored
commit 02f6ff90 upstream. On the internal mic of the Packard Bell DOTS, one channel has an inverted signal. Add a quirk to fix this up. BugLink: https://bugs.launchpad.net/bugs/1523232Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Takashi Iwai authored
commit a74a8216 upstream. rme96 driver needs to reset DAC depending on the sample rate, and this results in resetting to the max volume suddenly. It's because of the missing call of snd_rme96_apply_dac_volume(). However, calling this function right after the DAC reset still may not work, and we need some delay before this call. Since the DAC reset and the procedure after that are performed in the spinlock, we delay the DAC volume restore at the end after the spinlock. Reported-and-tested-by:
Sylvain LABOISNE <maeda1@free.fr> Signed-off-by:
-
Chunfeng Yun authored
commit 096b110a upstream. if a full speed hub connects to a high speed hub which supports MTT, the MTT field of its slot context will be set to 1 when xHCI driver setups an xHCI virtual device in xhci_setup_addressable_virt_dev(); once usb core fetch its hub descriptor, and need to update the xHC's internal data structures for the device, the HUB field of its slot context will be set to 1 too, meanwhile MTT is also set before, this will cause configure endpoint command fail, so in the case, we should clear MTT to 0 for full speed hub according to section 6.2.2 Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
-
Peter Zijlstra authored
commit 642c2d67 upstream. Dmitry reported a fairly silly recursive lock deadlock for PERF_EVENT_IOC_PERIOD, fix this by explicitly doing the inactive part of __perf_event_period() instead of calling that function. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Potapenko <glider@google.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: c7999c6f ("perf: Fix PERF_EVENT_IOC_PERIOD migration race") Link: http://lkml.kernel.org/r/20151130115615.GJ17308@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ken Xue authored
commit 4fd41a85 upstream. The routines in scsi_pm.c assume that if a runtime-PM callback is invoked for a SCSI device, it can only mean that the device's driver has asked the block layer to handle the runtime power management (by calling blk_pm_runtime_init(), which among other things sets q->dev). However, this assumption turns out to be wrong for things like the ses driver. Normally ses devices are not allowed to do runtime PM, but userspace can override this setting. If this happens, the kernel gets a NULL pointer dereference when blk_post_runtime_resume() tries to use the uninitialized q->dev pointer. This patch fixes the problem by checking q->dev in block layer before handle runtime PM. Since ses doesn't define any PM callbacks and call blk_pm_runtime_init(), the crash won't occur. This fixes Bugzilla #101371. https://bugzilla.kernel.org/show_bug.cgi?id=101371 More discussion can be found from below link. http://marc.info/?l=linux-scsi&m=144163730531875&w=2Signed-off-by:
Ken Xue <Ken.Xue@amd.com> Acked-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Mike Snitzer authored
commit 30ce6e1c upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Ben Hutchings authored
commit 5377adb0 upstream. usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit f9fa1887 upstream. qset_fill_page_list() do not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans Yang authored
commit 464ad8c4 upstream. When a USB 3.0 mass storage device is disconnected in transporting state, storage device driver may handle it as a transport error and reset the device by invoking usb_reset_and_verify_device() and following could happen: in usb_reset_and_verify_device(): udev->bos = NULL; For U1/U2 enabled devices, driver will disable LPM, and in some conditions: from usb_unlocked_disable_lpm() --> usb_disable_lpm() --> usb_enable_lpm() udev->bos->ss_cap->bU1devExitLat; And it causes 'NULL pointer' and 'kernel panic': [ 157.976257] Unable to handle kernel NULL pointer dereference at virtual address 00000010 ... [ 158.026400] PC is at usb_enable_link_state+0x34/0x2e0 [ 158.031442] LR is at usb_enable_lpm+0x98/0xac ... [ 158.137368] [<ffffffc0006a1cac>] usb_enable_link_state+0x34/0x2e0 [ 158.143451] [<ffffffc0006a1fec>] usb_enable_lpm+0x94/0xac [ 158.148840] [<ffffffc0006a20e8>] usb_disable_lpm+0xa8/0xb4 ... [ 158.214954] Kernel panic - not syncing: Fatal exception This commit moves 'udev->bos = NULL' behind usb_unlocked_disable_lpm() to prevent from NULL pointer access. Issue can be reproduced by following setup: 1) A SS pen drive behind a SS hub connected to the host. 2) Transporting data between the pen drive and the host. 3) Abruptly disconnect hub and pen drive from host. 4) With a chance it crashes. Signed-off-by:
Hans Yang <hansy@nvidia.com> Acked-by:
-
Guillaume Delbergue authored
commit d5d4fdd8 upstream. This patch is specifically for PCI support on the Versatile PB board using a DT. Currently, the dynamic IRQ mapping is broken when using DTs. For example, on QEMU, the SCSI driver is unable to request the IRQ. To fix this issue, this patch replaces the current dynamic mechanism with a static value as is done in the non-DT case. Signed-off-by:
Guillaume Delbergue <guillaume.delbergue@greensocs.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Al Viro authored
commit 9225c0b7 upstream. missing get_user() Signed-off-by:
-
Dmitry Katsubo authored
commit 9fa62b1a upstream. The patch extends the family of SATA-to-USB JMicron adapters that need FUA to be disabled and applies the same policy for uas driver. See details in http://unix.stackexchange.com/questions/237204/Signed-off-by:
Dmitry Katsubo <dmitry.katsubo@gmail.com> Tested-by:
-
Mikulas Patocka authored
commit d98f1cd0 upstream. When I connect an Intel SSD to SATA SIL controller (PCI ID 1095:3114), any TRIM command results in I/O errors being reported in the log. There is other similar error reported with TRIM and the SIL controller: https://bugs.centos.org/view.php?id=5880 Apparently the controller doesn't support TRIM commands. This patch disables TRIM support on the SATA SIL controller. ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata7.00: BMDMA2 stat 0x50001 ata7.00: failed command: DATA SET MANAGEMENT ata7.00: cmd 06/01:01:00:00:00/00:00:00:00:00/a0 tag 0 dma 512 out res 51/04:01:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) ata7.00: status: { DRDY ERR } ata7.00: error: { ABRT } ata7.00: device reported invalid CHS sector 0 sd 8:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 8:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] [descriptor] sd 8:0:0:0: [sdb] tag#0 Add. Sense: Unaligned write command sd 8:0:0:0: [sdb] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 21 95 88 00 20 00 00 00 00 blk_update_request: I/O error, dev sdb, sector 2200968 Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Xiangliang Yu authored
commit 023113d2 upstream. Current code doesn't update port value of Port Multiplier(PM) when sending FIS of softreset to device, command will fail if FBS is enabled. There are two ways to fix the issue: the first is to disable FBS before sending softreset command to PM device and the second is to update port value of PM when sending command. For the first way, i can't find any related rule in AHCI Spec. The second way can avoid disabling FBS and has better performance. Signed-off-by:
Xiangliang Yu <Xiangliang.Yu@amd.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 025af189 upstream. In ttm_write_lock(), the uninterruptible path should call __ttm_write_lock() not __ttm_read_lock(). This fixes a vmwgfx hang on F23 start up. syeh: Extracted this from one of Thomas' internal patches. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Jan Kara authored
commit bc23f0c8 upstream. Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by:
Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b7941Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
David Turner authored
commit a4dad1ae upstream. In ext4, the bottom two bits of {a,c,m}time_extra are used to extend the {a,c,m}time fields, deferring the year 2038 problem to the year 2446. When decoding these extended fields, for times whose bottom 32 bits would represent a negative number, sign extension causes the 64-bit extended timestamp to be negative as well, which is not what's intended. This patch corrects that issue, so that the only negative {a,c,m}times are those between 1901 and 1970 (as per 32-bit signed timestamps). Some older kernels might have written pre-1970 dates with 1,1 in the extra bits. This patch treats those incorrectly-encoded dates as pre-1970, instead of post-2311, until kernel 4.20 is released. Hopefully by then e2fsck will have fixed up the bad data. Also add a comment explaining the encoding of ext4's extra {a,c,m}time bits. Signed-off-by:
David Turner <novalis@novalis.org> Signed-off-by:
Mark Harris <mh8928@yahoo.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23732Signed-off-by:
-
Jonas Jonsson authored
commit a0e80fbd upstream. The flash loader has been seen on a Telit UE910 modem. The flash loader is a bit special, it presents both an ACM and CDC Data interface but only the latter is useful. Unless a magic string is sent to the device it will disappear and the regular modem device appears instead. Signed-off-by:
Jonas Jonsson <jonas@ludd.ltu.se> Tested-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jonas Jonsson authored
commit f33a7f72 upstream. Some modems, such as the Telit UE910, are using an Infineon Flash Loader utility. It has two interfaces, 2/2/0 (Abstract Modem) and 10/0/0 (CDC Data). The latter can be used as a serial interface to upgrade the firmware of the modem. However, that isn't possible when the cdc-acm driver takes control of the device. The following is an explanation of the behaviour by Daniele Palmas during discussion on linux-usb. "This is what happens when the device is turned on (without modifying the drivers): [155492.352031] usb 1-3: new high-speed USB device number 27 using ehci-pci [155492.485429] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11 [155492.485436] usb 1-3: New USB device found, idVendor=058b, idProduct=0041 [155492.485439] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [155492.485952] cdc_acm 1-3:1.0: ttyACM0: USB ACM device This is the flashing device that is caught by the cdc-acm driver. Once the ttyACM appears, the application starts sending a magic string (simple write on the file descriptor) to keep the device in flashing mode. If this magic string is not properly received in a certain time interval, the modem goes on in normal operative mode: [155493.748094] usb 1-3: USB disconnect, device number 27 [155494.916025] usb 1-3: new high-speed USB device number 28 using ehci-pci [155495.059978] usb 1-3: New USB device found, idVendor=1bc7, idProduct=0021 [155495.059983] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [155495.059986] usb 1-3: Product: 6 CDC-ACM + 1 CDC-ECM [155495.059989] usb 1-3: Manufacturer: Telit [155495.059992] usb 1-3: SerialNumber: 359658044004697 [155495.138958] cdc_acm 1-3:1.0: ttyACM0: USB ACM device [155495.140832] cdc_acm 1-3:1.2: ttyACM1: USB ACM device [155495.142827] cdc_acm 1-3:1.4: ttyACM2: USB ACM device [155495.144462] cdc_acm 1-3:1.6: ttyACM3: USB ACM device [155495.145967] cdc_acm 1-3:1.8: ttyACM4: USB ACM device [155495.147588] cdc_acm 1-3:1.10: ttyACM5: USB ACM device [155495.154322] cdc_ether 1-3:1.12 wwan0: register 'cdc_ether' at usb-0000:00:1a.7-3, Mobile Broadband Network Device, 00:00:11:12:13:14 Using the cdc-acm driver, the string, though being sent in the same way than using the usb-serial-simple driver (I can confirm that the data is passing properly since I used an hw usb sniffer), does not make the device to stay in flashing mode." Signed-off-by:
-
Konstantin Shkolnyy authored
commit 7c90e610 upstream. CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID and completely different from CP210x devices. Signed-off-by:
Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit 231bfe53 upstream. WARN_ON() only takes a condition argument. I have changed these to WARN() instead. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Felipe Balbi authored
commit 391e6dcb upstream. pxa27x disconnects pullups on suspend but doesn't notify the gadget driver about it, so gadget driver can't disable the endpoints it was using. This causes problems on resume because gadget core will think endpoints are still enabled and just ignore the following usb_ep_enable(). Fix this problem by calling gadget_driver->disconnect(). Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Felipe Balbi <balbi@ti.com> [ luis: backported to 3.16: - file rename: drivers/usb/gadget/udc/pxa27x_udc.c -> drivers/usb/gadget/pxa27x_udc.c ] Signed-off-by:
-
Roman Gushchin authored
commit 3ca8138f upstream. I got a report about unkillable task eating CPU. Further investigation shows, that the problem is in the fuse_fill_write_pages() function. If iov's first segment has zero length, we get an infinite loop, because we never reach iov_iter_advance() call. Fix this by calling iov_iter_advance() before repeating an attempt to copy data from userspace. A similar problem is described in 124d3b70 ("fix writev regression: pan hanging unkillable and un-straceable"). If zero-length segmend is followed by segment with invalid address, iov_iter_fault_in_readable() checks only first segment (zero-length), iov_iter_copy_from_user_atomic() skips it, fails at second and returns zero -> goto again without skipping zero-length segment. Patch calls iov_iter_advance() before goto again: we'll skip zero-length segment at second iteraction and iov_iter_fault_in_readable() will detect invalid address. Special thanks to Konstantin Khlebnikov, who helped a lot with the commit description. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Maxim Patlasov <mpatlasov@parallels.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Fixes: ea9b9907 ("fuse: implement perform_write") Signed-off-by:
-
