- 01 Aug, 2023 15 commits
-
-
Christian Marangi authored
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Currently this is not the case for qca8k where learning is enabled unconditionally in qca8k_setup for every user port. Handle ports configured in standalone mode by making the learning configurable and not enabling it by default. Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to enable learning for bridge that request it and tweak .port_stp_state_set to correctly disable learning when port is configured in standalone mode. Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Christian Marangi authored
Currently checksum is recalculated and dsa tag stripped even if we later don't find the dev. To improve code, exit early if we don't find the dev and skip additional operation on the skb since it will be freed anyway. Signed-off-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
-
Paolo Abeni authored
Pedro Tammela says: ==================== net/sched: improve class lifetime handling Valis says[0]: ============ Three classifiers (cls_fw, cls_u32 and cls_route) always copy tcf_result struct into the new instance of the filter on update. This causes a problem when updating a filter bound to a class, as tcf_unbind_filter() is always called on the old instance in the success path, decreasing filter_cnt of the still referenced class and allowing it to be deleted, leading to a use-after-free. ============ Turns out these could have been spotted easily with proper warnings. Improve the current class lifetime with wrappers that check for overflow/underflow. While at it add an extack for when a class in use is deleted. [0] https://lore.kernel.org/all/20230721174856.3045-1-sec@valis.email/ ==================== Link: https://lore.kernel.org/r/20230728153537.1865379-1-pctammela@mojatatu.comSigned-off-by:
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by:
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by:
-
Pedro Tammela authored
Add extack to warn that delete was rejected because the class is still in use Acked-by:
-
Pedro Tammela authored
The 'filter_cnt' counter is used to control a Qdisc class lifetime. Each filter referecing this class by its id will eventually increment/decrement this counter in their respective 'add/update/delete' routines. As these operations are always serialized under rtnl lock, we don't need an atomic type like 'refcount_t'. It also means that we lose the overflow/underflow checks already present in refcount_t, which are valuable to hunt down bugs where the unsigned counter wraps around as it aids automated tools like syzkaller to scream in such situations. Wrap the open coded increment/decrement into helper functions and add overflow checks to the operations. Acked-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: cleanup and improvements in the selftests This small series of 4 patches adds some improvements in MPTCP selftests: - Patch 1 reworks the detailed report of mptcp_join.sh selftest to better display what went well or wrong per test. - Patch 2 adds colours (if supported, forced and/or not disabled) in mptcp_join.sh selftest output to help spotting issues. - Patch 3 modifies an MPTCP selftest tool to interact with the path-manager via Netlink to always look for errors if any. This makes sure odd behaviours can be seen in the logs and errors can be caught later if needed. - Patch 4 removes stdout and stderr redirections to /dev/null when using pm_nl_ctl if no errors are expected in order to log odd behaviours. ==================== Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-0-7e9cc530a9cd@tessares.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
All pm_nl_ctl commands were muted. If there was an unexpected error with one of them, this was simply not visible in the logs, making the analysis very hard. It could also hide misuse of commands by mistake. Now the output is only muted when we do expect to have an error, e.g. when giving invalid arguments on purpose. Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-4-7e9cc530a9cd@tessares.netSigned-off-by:
-
Matthieu Baerts authored
If a Netlink command for the MPTCP path-managers is not valid, it is important to check if there are errors. If yes, they need to be reported instead of being ignored and exiting without errors. Now if no replies are expected, an ACK from the kernelspace is asked by the userspace in order to always expect a reply. We can use the same buffer that is currently always >1024 bytes. Then we can check if there is an error (err->error), print it if any and report the error. After this modification, it is required to mute expected errors in mptcp_join.sh and pm_netlink.sh selftests: - when trying to add a bad endpoint, e.g. duplicated - when trying to set the two limits above the hard limit Reviewed-by:
-
Matthieu Baerts authored
Thanks to the parent commit, it is easy to change the output and add some colours to help spotting issues. The colours are not used if stdout is redirected or if NO_COLOR env var is set to 1 as specified in https://no-color.org. It is possible to force displaying the colours even if stdout is redirected by setting this env var: SELFTESTS_MPTCP_LIB_COLOR_FORCE=1 Acked-by:
-
Matthieu Baerts authored
This patch modifies how the detailed results are printed, mainly to improve what is displayed in case of issue: - Now the test name (title) is printed earlier, when starting the test if it is not intentionally skipped: by doing that, errors linked to a test will be printed after having written the test name and then avoid confusions. - Due to the previous item, it is required to add a new line after having printed the test name because in case of error with a command, it is better not to have the output in the middle of the screen. - Each check is printed on a dedicated line with aligned status (ok, skip, fail): it is easier to spot which one has failed, simpler to manage in the code not having to deal with alignment case by case and helpers can be used to uniform what is done. These helpers can also be useful later to do more actions depending on the results or change in one place what is printed. - Info messages have been reduced and aligned as well. And info messages about the creation of the default test files of 1 KB are no longer printed. Example: 001 no JOIN syn [ ok ] synack [ ok ] ack [ ok ] Or with a skip and a failure: 001 no JOIN syn [ ok ] synack [fail] got 42 JOIN[s] synack expected 0 Server ns stats (...) Client ns stats (...) ack [skip] Or with info: 104 Infinite map Test file (size 128 KB) for client Test file (size 128 KB) for server file received by server has inverted byte at 169 5 corrupted pkts syn [ ok ] synack [ ok ] While at it, verify_listener_events() now also print more info in case of failure and in pm_nl_check_endpoint(), the test is marked as failed instead of skipped if no ID has been given (internal selftest issue). Acked-by: -
Yue Haibing authored
commit f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") introducted these but never implemented. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
-
Shuah Khan authored
Fix input argument parsing paths to skip from their error legs. This fix helps to avoid false test failure reports without running the test. Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Reviewed-by:
Anjali Kulkarni <anjali.k.kulkarni@oracle.com> Link: https://lore.kernel.org/r/20230729002403.4278-1-skhan@linuxfoundation.orgSigned-off-by:
-
- 31 Jul, 2023 12 commits
-
-
Martin KaFai Lau authored
During unregister_netdevice_many_notify(), the ordering of our concerned function calls is like this: unregister_netdevice_many_notify dev_shutdown qdisc_put clsact_destroy tcx_uninstall The syzbot reproducer triggered a case that the qdisc refcnt is not zero during dev_shutdown(). tcx_uninstall() will then WARN_ON_ONCE(tcx_entry(entry)->miniq_active) because the miniq is still active and the entry should not be freed. The latter assumed that qdisc destruction happens before tcx teardown. This fix is to avoid tcx_uninstall() doing tcx_entry_free() when the miniq is still alive and let the clsact_destroy() do the free later, so that we do not assume any specific ordering for either of them. If still active, tcx_uninstall() does clear the entry when flushing out the prog/link. clsact_destroy() will then notice the "!tcx_entry_is_active()" and then does the tcx_entry_free() eventually. Fixes: e420bed0 ("bpf: Add fd-based tcx multi-prog infra with link support") Reported-by: syzbot+376a289e86a0fd02b9ba@syzkaller.appspotmail.com Reported-by:Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Martin KaFai Lau <martin.lau@kernel.org> Co-developed-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Florian Fainelli authored
There is no need to spam the kernel log with such an indication, remove this message. Signed-off-by:
-
Yue Haibing authored
These are never implemented since introduction in commit d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20230729122036.32988-1-yuehaibing@huawei.comSigned-off-by:
-
Yue Haibing authored
commit f9aab6f2 ("net/smc: immediate freeing in smc_lgr_cleanup_early()") left behind smc_lgr_schedule_free_work_fast() declaration. And since commit 349d4312 ("net/smc: fix kernel panic caused by race of smc_sock") smc_ib_modify_qp_reset() is not used anymore. Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/20230729121929.17180-1-yuehaibing@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Shuah Khan says: ==================== Connector/proc_filter test fixes The first patch fixes the LKFT reported compile error, second one adds .gitignore. ==================== Applying the first 2 patches, third one resent separately. Link: https://lore.kernel.org/r/cover.1690564372.git.skhan@linuxfoundation.orgSigned-off-by:
-
Shuah Khan authored
Add gitignore and poupulate it with test name - proc_filter Signed-off-by:
-
Shuah Khan authored
The test compile fails with following errors. Fix the Makefile CFLAGS to include KHDR_INCLUDES to pull in uapi defines. gcc -Wall proc_filter.c -o ../tools/testing/selftests/connector/proc_filter proc_filter.c: In function ‘send_message’: proc_filter.c:22:33: error: invalid application of ‘sizeof’ to incomplete type ‘struct proc_input’ 22 | sizeof(struct proc_input)) | ^~~~~~ proc_filter.c:42:19: note: in expansion of macro ‘NL_MESSAGE_SIZE’ 42 | char buff[NL_MESSAGE_SIZE]; | ^~~~~~~~~~~~~~~ proc_filter.c:22:33: error: invalid application of ‘sizeof’ to incomplete type ‘struct proc_input’ 22 | sizeof(struct proc_input)) | ^~~~~~ proc_filter.c:48:34: note: in expansion of macro ‘NL_MESSAGE_SIZE’ 48 | hdr->nlmsg_len = NL_MESSAGE_SIZE; | ^~~~~~~~~~~~~~~ ` Reported-by:Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYt=6ysz636XcQ=-KJp7vJcMZ=NjbQBrn77v7vnTcfP2cA@mail.gmail.com/Signed-off-by:
-
Jan Sokolowski authored
Replace uses of i40e_status to as equivalent as possible error codes. Remove enum i40e_status as it is no longer needed Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
-
Yue Haibing authored
commit 8a59f9d1 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()") left behind tcp_bpf_get_proto() declaration. And tcp_v4_tw_remember_stamp() function is remove in ccb7c410 ("timewait_sock: Create and use getpeer op."). Since commit 68698970 ("tcp: simplify tcp_mark_skb_lost") tcp_skb_mark_lost_uncond_verify() declaration is not used anymore. Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230729122644.10648-1-yuehaibing@huawei.comSigned-off-by:
-
Yue Haibing authored
devlink_port_region_destroy() is never implemented since commit 544e7c33 ("net: devlink: Add support for port regions"). Signed-off-by:
-
Kuniyuki Iwashima authored
Commit df8fc4e9 ("kbuild: Enable -fstrict-flex-arrays=3") started applying strict rules to standard string functions. It does not work well with conventional socket code around each protocol- specific sockaddr_XXX struct, which is cast from sockaddr_storage and has a bigger size than fortified functions expect. See these commits: commit 06d4c8a8 ("af_unix: Fix fortify_panic() in unix_bind_bsd().") commit ecb4534b ("af_unix: Terminate sun_path when bind()ing pathname socket.") commit a0ade840 ("af_packet: Fix warning of fortified memcpy() in packet_getname().") We must cast the protocol-specific address back to sockaddr_storage to call such functions. However, in the case of getsockaddr(SO_PEERNAME), the rationale is a bit unclear as the buffer is defined by char[128] which is the same size as sockaddr_storage. Let's use sockaddr_storage explicitly. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ratheesh Kannoth authored
As 32bits of dissector->used_keys are exhausted, increase the size to 64bits. This is base change for ESP/AH flow dissector patch. Please find patch and discussions at https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#tSigned-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Tested-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
- 29 Jul, 2023 8 commits
-
-
Yang Li authored
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there is no need to check before using dev_{put, hold}, remove it to silence the warning: ./drivers/net/team/team.c:2325:3-10: WARNING: NULL check before dev_{put, hold} functions is not needed. Reported-by:Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5991Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reviewed-by:
-
Lorenzo Bianconi authored
Enable hw Packet Process Engine (PPE) for MT7988 SoC. Tested-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5e86341b0220a49620dadc02d77970de5ded9efc.1690441576.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
In order to recycle pages, enable page_pool allocator for MT7988 SoC. Tested-by:
-
Chen Jiahao authored
Referring to platform_get_irq()'s definition, the return value has already been checked, error message also been printed via dev_err_probe() if ret < 0. Calling dev_err_probe() one more time outside platform_get_irq() is obviously redundant. Removing dev_err_probe() outside platform_get_irq() to clean up above problem. Signed-off-by:
Chen Jiahao <chenjiahao16@huawei.com> Reviewed-by:
Justin Chen <justin.chen@broadcom.com> Link: https://lore.kernel.org/r/20230727115551.2655840-1-chenjiahao16@huawei.comSigned-off-by:
-
YueHaibing authored
This is not used since commit 3a755cd8 ("bonding: add new option lacp_active") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230726143816.15280-1-yuehaibing@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Hayes Wang says: ==================== r8152: reduce control transfer The two patches are used to reduce the number of control transfer when access the registers in bulk. ==================== Link: https://lore.kernel.org/r/20230726030808.9093-417-nic_swsd@realtek.comSigned-off-by:
-
Hayes Wang authored
PLA_BP_0 ~ PLA_BP_15 (0xfc28 ~ 0xfc46) are continuous registers, so we could combine the control transfers into one control transfer. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20230726030808.9093-419-nic_swsd@realtek.comSigned-off-by:
-
Hayes Wang authored
Reduce the control transfer if all bytes of first or the last DWORD are written. The original method is to split the control transfer into three parts (the first DWORD, middle continuous data, and the last DWORD). However, they could be combined if whole bytes of the first DWORD or last DWORD are written. That is, the first DWORD or the last DWORD could be combined with the middle continuous data, if the byte_en is 0xff. Signed-off-by:
-
- 28 Jul, 2023 5 commits
-
-
Colin Ian King authored
The pointer data is being incremented but this change to the pointer is not used afterwards. The increment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20230726164522.369206-1-colin.i.king@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Chuck Lever says: ==================== In-kernel support for the TLS Alert protocol IMO the kernel doesn't need user space (ie, tlshd) to handle the TLS Alert protocol. Instead, a set of small helper functions can be used to handle sending and receiving TLS Alerts for in-kernel TLS consumers. ==================== Merged on top of a tag in case it's needed in the NFS tree. Link: https://lore.kernel.org/r/169047923706.5241.1181144206068116926.stgit@oracle-102.nfsv4bat.orgSigned-off-by:
-
Chuck Lever authored
Add observability for the new TLS Alert infrastructure. Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169047947409.5241.14548832149596892717.stgit@oracle-102.nfsv4bat.orgSigned-off-by:
-
Chuck Lever authored
Use the helpers to parse the level and description fields in incoming alerts. "Warning" alerts are discarded, and "fatal" alerts mean the session is no longer valid. Signed-off-by:
-
Chuck Lever authored
Kernel TLS consumers can replace common TLS Alert parsing code with these helpers. Signed-off-by:
-
