- 14 Sep, 2020 5 commits
-
-
Ville Syrjälä authored
Even if we're not doing downscaling we should account for some of the extra dotclock limitations for g4x+ sprites. In particular we must never exceed the 90% rule, and with RGB that limits actually drops to 80%. So instead of bailing out when upscaling let's clamp the scaling factor appropriately and go through the rest of calculation normally. By luck we already did the full calculations for the 1:1 case. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206201204.31704-1-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
The CACHE_MODE_0 save/restore was added without explanation in commit 1f84e550 ("drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)"). If there are any bits we care about those should be set explicitly during some appropriate init function. Let's assume it's all good and just nuke this magic save/restore. Signed-off-by:
-
Ville Syrjälä authored
Originally added in commit 1f84e550 ("drm/i915 more registers for S3 (DSPCLK_GATE_D, CACHE_MODE_0, MI_ARB_STATE)") to fix some underruns. I suspect that was due to the trickle feed settings getting clobbered during suspend. We've been disabling trickle feed explicitly since commit 20f94967 ("drm/i915: Disable trickle feed via MI_ARB_STATE for the gen4") so this magic save/restore should no longer be needed. Signed-off-by:
-
Ville Syrjälä authored
The FBC_CONTROL save restore is there just to preserve the compression interval setting. Since commit a68ce21b ("drm/i915/fbc: Store the fbc1 compression interval in the params") we've been explicitly setting the interval to a specific value, so the sace/restore is now entirely pointless. Signed-off-by:
-
Ville Syrjälä authored
We don't save/restore PCH_PORT_HOTPLUG so no point in reseving space for the value. Signed-off-by:
-
- 12 Sep, 2020 1 commit
-
-
Rodrigo Vivi authored
Sync drm-intel-gt-next here so we can have an unified fixes flow. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 11 Sep, 2020 4 commits
-
-
Ville Syrjälä authored
There's no real reason to stash away the DPIO PHY IOSF sideband port numbers for VLV/CHV. Just compute them at runtime in the sideband code. Gets rid of the oddball intel_init_dpio() function from the high level init flow. Signed-off-by:
-
Jani Nikula authored
Logically part of the display restore. Note: This has been in place since the introduction of gmbus support. The gmbus code also does the resets before transfers. Is this really needed, or a historical accident? Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Logically part of the display save/restore. No functional changes. Reviewed-by:
-
Jani Nikula authored
Disable all display feature flags when there are no pipes i.e. there is no display. This should help with not having to additionally check for HAS_DISPLAY() when a feature flag check would suffice. Also disable modeset and atomic driver features. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 10 Sep, 2020 1 commit
-
-
Maarten Lankhorst authored
This function should be an int, not a bool. Presumably because we had the same 2 reverts in a slightly different way, git got confused. Thanks to Dan for reporting. :) The conflict is between the 3 reverts in drm-fixes: 4993a8a3 ("Revert "drm/i915: Remove i915_gem_object_get_dirty_page()"") ad5d95e4 ("Revert "drm/i915/gem: Async GPU relocations only"") 20561da3 ("Revert "drm/i915/gem: Delete unused code"") And the slightly different combined revert in drm-intel-gt-next, but with the same goal: 102a0a90 ("Revert "drm/i915/gem: Async GPU relocations only"") In the merge commit 1f4b2aca ("Merge tag 'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next") things went wrong, but the merge commit view now doesn't show any conflict anymore (as git tends to do when the resolution picks one or the other branch). The need to handle other than just true/false error codes in __reloc_entry_gpu was added in the dma_resv locking changes in c43ce123 ("drm/i915: Use per object locking in execbuf, v12.") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Dave Airlie <airlied@redhat.com> [danvet: Explain this entire saga a lot better, adding tons of commit references. Also note that this was merged before full intel-gfx-CI results, only after BAT, since the breakage at the BAT run is already severe enough to block all pre-merge testing.] Fixes: 1f4b2aca ("Merge tag 'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next") Acked-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200910111225.2184193-1-maarten.lankhorst@linux.intel.com
-
- 09 Sep, 2020 1 commit
-
-
Dave Airlie authored
Merge tag 'topic/nouveau-i915-dp-helpers-and-cleanup-2020-08-31-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next UAPI Changes: None Cross-subsystem Changes: * Moves a bunch of miscellaneous DP code from the i915 driver into a set of shared DRM DP helpers Core Changes: * New DRM DP helpers (see above) Driver Changes: * Implements usage of the aforementioned DP helpers in the nouveau driver, along with some other various HPD related cleanup for nouveau Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/11e59ebdea7ee4f46803a21fe9b21443d2b9c401.camel@redhat.com
-
- 08 Sep, 2020 10 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next (Same content as drm-intel-gt-next-2020-09-04-3, S-o-b's added) UAPI Changes: (- Potential implicit changes from WW locking refactoring) Cross-subsystem Changes: (- WW locking changes should align the i915 locking more with others) Driver Changes: - MAJOR: Apply WW locking across the driver (Maarten) - Reverts for 5 commits to make applying WW locking faster (Maarten) - Disable preparser around invalidations on Tigerlake for non-RCS engines (Chris) - Add missing dma_fence_put() for error case of syncobj timeline (Chris) - Parse command buffer earlier in eb_relocate(slow) to facilitate backoff (Maarten) - Pin engine before pinning all objects (Maarten) - Rework intel_context pinning to do everything outside of pin_mutex (Maarten) - Avoid tracking GEM context until registered (Cc: stable, Chris) - Provide a fastpath for waiting on vma bindings (Chris) - Fixes to preempt-to-busy mechanism (Chris) - Distinguish the virtual breadcrumbs from the irq breadcrumbs (Chris) - Switch to object allocations for page directories (Chris) - Hold context/request reference while breadcrumbs are active (Chris) - Make sure execbuffer always passes ww state to i915_vma_pin (Maarten) - Code refactoring to facilitate use of WW locking (Maarten) - Locking refactoring to use more granular locking (Maarten, Chris) - Support for multiple pinned timelines per engine (Chris) - Move complication of I915_GEM_THROTTLE to the ioctl from general code (Chris) - Make active tracking/vma page-directory stash work preallocated (Chris) - Avoid flushing submission tasklet too often (Chris) - Reduce context termination list iteration guard to RCU (Chris) - Reductions to locking contention (Chris) - Fixes for issues found by CI (Chris) Signed-off-by:
-
Dave Airlie authored
Commit '6f6a73c8' from Linus' tree The fixes reverts cause a bit of a conflict pain with intel next, start fixing it up here. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "The i915 reverts are going to be a bit of a conflict mess for next, so I decided to dequeue them now, along with some msm fixes for a ring corruption issue, that Rob sent over the weekend. Summary: i915: - revert gpu relocation changes due to regression msm: - fixes for RPTR corruption issue" * tag 'drm-fixes-2020-09-08' of git://anongit.freedesktop.org/drm/drm: Revert "drm/i915/gem: Delete unused code" Revert "drm/i915/gem: Async GPU relocations only" Revert "drm/i915: Remove i915_gem_object_get_dirty_page()" drm/msm: Disable the RPTR shadow drm/msm: Disable preemption on all 5xx targets drm/msm: Enable expanded apriv support for a650 drm/msm: Split the a5xx preemption record
-
Linus Torvalds authored
Merge tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching fix from Petr Mladek: "Workaround for 'unreachable instruction' objtool warnings that happen with some compiler versions" * tag 'livepatching-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: Revert "kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled"
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.10-2020-09-03: amdgpu: - RAS fixes - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support in DC - Enable plane rotation - Rework pre-OS vram reservation handling during driver init - Add standard interface to dump GPU metrics table from SMU - Rework tiling and tmz state handling in atomic commits - Pstate fixes - Add voltage and power hwmon interfaces for renoir - SW CTF fixes - S/G display fix for Raven - Print client strings for vmfaults for vega and newer - Manual fan control fixes - Display updates - Reorg power management directory structure - Misc bug fixes - Misc code cleanups amdkfd: - Topology fixes - Add SMI events for thermal throttling and GPU resets radeon: - switch from pci_* to dma_* for dma allocations - PLL fix Scheduler: - Clean up priority levels UAPI: - amdgpu INFO IOCTL query update for TMZ state https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6049 - amdkfd SMI event interface updates https://github.com/RadeonOpenCompute/rocm_smi_lib/tree/therm_thrott From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903222921.4152-1-alexander.deucher@amd.com
-
Dave Airlie authored
These commits caused a regression on Lenovo t520 sandybridge machine belonging to reporter. We are reverting them for 5.10 for other reasons, so just do it for 5.9 as well. This reverts commit 7ac2d253. Reported-by:
Harald Arnesen <harald@skogtun.org> Signed-off-by:
-
Dave Airlie authored
These commits caused a regression on Lenovo t520 sandybridge machine belonging to reporter. We are reverting them for 5.10 for other reasons, so just do it for 5.9 as well. This reverts commit 9e0f9464. Reported-by:
-
Dave Airlie authored
These commits caused a regression on Lenovo t520 sandybridge machine belonging to reporter. We are reverting them for 5.10 for other reasons, so just do it for 5.9 as well. This reverts commit 763fedd6. Reported-by:
Dave Airlie <airied@redhat.com>
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
A few fixes for a potential RPTR corruption issue. Signed-off-by:
-
Dave Airlie authored
Backmerge 5.9-rc4 as there is a nasty qxl conflict that needs to be resolved. Signed-off-by:
-
- 07 Sep, 2020 18 commits
-
-
Thomas Hellström authored
The hwsp_gtt object is used for sub-allocation and could therefore be shared by many contexts causing unnecessary contention during concurrent context pinning. However since we're currently locking it only for pinning, it remains resident until we unpin it, and therefore it's safe to drop the lock early, allowing for concurrent thread access. Signed-off-by:
Thomas Hellström <thomas.hellstrom@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
(NOTE: This is the minimal backportable fix, a full fix is being developed at https://patchwork.freedesktop.org/patch/388048/) The flags passed to the wait_entry.func are passed onwards to try_to_wake_up(), which has a very particular interpretation for its wake_flags. In particular, beyond the published WF_SYNC, it has a few internal flags as well. Since we passed the fence->error down the chain via the flags argument, these ended up in the default_wake_function confusing the kernel/sched. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2110 Fixes: ef468849 ("drm/i915: Propagate fence errors") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728152144.1100-1-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. Previous fix 1d9221e9 ("drm/i915: Skip signaling a signaled request") however did not correctly serialize request retirement with the execution callbacks. We were using the i915_request.lock to serialise adding an execution callback with __i915_request_submit. However, if we use an atomic llist_add to serialise multiple waiters and then check to see if the request is already executing, we can remove the irq-spinlock and fix serialization between retirement and execution callbacks in one go. v2: Avoid using the irq_work when outside of the irq-spinlocks, where we can execute the callbacks immediately. v3: Pay close attention to the order of setting ACTIVE on retirement, we need to ensure the request is signaled and breadcrumbs detached before we finish removing the request from the engine. v4: Expanded commit message. Fixes: 1d9221e9 ("drm/i915: Skip signaling a signaled request") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200716142207.13003-2-chris@chris-wilson.co.ukSigned-off-by:
-
Chris Wilson authored
To implement preempt-to-busy (and so efficient timeslicing and best utilization of the hardware submission ports) we let the GPU run asynchronously in respect to the ELSP submission queue. This created challenges in keeping and accessing the driver state mirroring the asynchronous GPU execution. The latest occurence of this was spotted by KCSAN: [ 1413.563200] BUG: KCSAN: data-race in __await_execution+0x217/0x370 [i915] [ 1413.563221] [ 1413.563236] race at unknown origin, with read to 0xffff88885bb6c478 of 8 bytes by task 9654 on cpu 1: [ 1413.563548] __await_execution+0x217/0x370 [i915] [ 1413.563891] i915_request_await_dma_fence+0x4eb/0x6a0 [i915] [ 1413.564235] i915_request_await_object+0x421/0x490 [i915] [ 1413.564577] i915_gem_do_execbuffer+0x29b7/0x3c40 [i915] [ 1413.564967] i915_gem_execbuffer2_ioctl+0x22f/0x5c0 [i915] [ 1413.564998] drm_ioctl_kernel+0x156/0x1b0 [ 1413.565022] drm_ioctl+0x2ff/0x480 [ 1413.565046] __x64_sys_ioctl+0x87/0xd0 [ 1413.565069] do_syscall_64+0x4d/0x80 [ 1413.565094] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To complicate matters, we have to both avoid the read tearing of *active and avoid any write tearing as perform the pending[] -> inflight[] promotion of the execlists. This is because we cannot rely on the memcpy doing u64 aligned copies on all kernels/platforms and so we opt to open-code it with explicit WRITE_ONCE annotations to satisfy KCSAN. v2: When in doubt, write the same comment again. v3: Expanded commit message. Fixes: b55230e5 ("drm/i915: Check for awaits on still currently executing requests") Signed-off-by:
-
Maarten Lankhorst authored
Use ww locking for pin_to_display_plane for all the pinning and locking. With the locking removed from set_cache_level, we need to fix i915_gem_set_caching_ioctl to take the object reservation lock. As this is a single lock, we don't need to use the ww dance. Changes since v1: - Do not use ww locking in i915_gem_set_caching_ioctl (Thomas). Signed-off-by:
-
Maarten Lankhorst authored
We want to start requiring the reservation_lock instead of obj->mm.lock for pinning objects, take the ww lock inside vm_fault_gtt as a first step towards the legacy lock removal. Signed-off-by:
-
Maarten Lankhorst authored
Make sure vma_lock is not used as inner lock when kernel context is used, and add ww handling where appropriate. Ensure that execbuf selftests keep passing by using ww handling. Changes since v2: - Fix i915_gem_context finally. Signed-off-by:
-
Maarten Lankhorst authored
We want to get rid of intel_context_pin(), convert intel_context_create_request() first. :) Signed-off-by:
-
Maarten Lankhorst authored
This function does not use intel_context_create_request, so it has to use the same locking order as normal code. This is required to shut up lockdep in selftests. Signed-off-by:
-
Maarten Lankhorst authored
Some i915 selftests still use i915_vma_lock() as inner lock, and intel_context_create_request() intel_timeline->mutex as outer lock. Fortunately for selftests this is not an issue, they should be fixed but we can move ahead and cleanify lockdep now. Signed-off-by:
-
Maarten Lankhorst authored
We have the ordering of timeline->mutex vs resv_lock wrong, convert the i915_pin_vma and intel_context_pin as well to future-proof this. We may need to do future changes to do this more transaction-like, and only get down to a single i915_gem_ww_ctx, but for now this should work. Signed-off-by:
-
Maarten Lankhorst authored
Instead of using intel_context_create_request(), use intel_context_pin() and i915_create_request directly. Now all those calls are gone outside of selftests. :) Signed-off-by:
-
Maarten Lankhorst authored
This is the last part outside of selftests that still don't use the correct lock ordering of timeline->mutex vs resv_lock. With gem fixed, there are a few places that still get locking wrong: - gvt/scheduler.c - i915_perf.c - Most if not all selftests. Changes since v1: - Add intel_engine_pm_get/put() calls to fix use-after-free when using intel_engine_get_pool(). Signed-off-by:
-
Maarten Lankhorst authored
As a preparation step for full object locking and wait/wound handling during pin and object mapping, ensure that we always pass the ww context in i915_gem_execbuffer.c to i915_vma_pin, use lockdep to ensure this happens. This also requires changing the order of eb_parse slightly, to ensure we pass ww at a point where we could still handle -EDEADLK safely. Signed-off-by:
-
Maarten Lankhorst authored
Instead of doing everything inside of pin_mutex, we move all pinning outside. Because i915_active has its own reference counting and pinning is also having the same issues vs mutexes, we make sure everything is pinned first, so the pinning in i915_active only needs to bump refcounts. This allows us to take pin refcounts correctly all the time. Signed-off-by:
-
Maarten Lankhorst authored
We want to lock all gem objects, including the engine context objects, rework the throttling to ensure that we can do this. Now we only throttle once, but can take eb_pin_engine while acquiring objects. This means we will have to drop the lock to wait. If we don't have to throttle we can still take the fastpath, if not we will take the slowpath and wait for the throttle request while unlocked. The engine has to be pinned as first step, otherwise gpu relocations won't work. Changes since v1: - Only need to get a throttled request in the fastpath, no need for a global flag any more. - Always free the waited request correctly. Changes since v2: - Use intel_engine_pm_get()/put() to keeep engine pool alive during EDEADLK handling. Changes since v3: - Fix small rq leak. Changes since v4: - Use a single reloc_context, for intel_context_pin_ww(). Signed-off-by:
-
Maarten Lankhorst authored
Those arguments are already set as eb.file and eb.args, so kill off the extra arguments. This will allow us to move eb_pin_engine() to after we reserved all BO's. Signed-off-by:
-
Maarten Lankhorst authored
This is required if we want to pass a ww context in intel_context_pin and gen6_ppgtt_pin(). Signed-off-by:
-
