The current behavior of dev_pm_qos_add_notifier() makes device PM QoS
notifiers less than useful.  Namely, it silently returns success when
called before any PM QoS constraints are added for the device, so the
caller will assume that the notifier has been registered, but when
someone actually adds some nontrivial constraints for the device
eventually, the previous callers of dev_pm_qos_add_notifier()
will not know about that and their notifier routines will not be
executed (contrary to their expectations).

To address this problem make dev_pm_qos_add_notifier() create the
constraints object for the device if it is not present when the
routine is called.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by : markgross <markgross@thegnar.org>

After the previous changes in default_stop_ok() and
default_power_down_ok() for PM domains, there are two fields in
struct dev_pm_info that aren't necessary any more,  suspend_time
and max_time_suspended_ns.

Remove those fields along with all of the code that accesses them,
which simplifies the runtime PM framework quite a bit.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The existing default domain power down governor function for PM
domains, default_power_down_ok(), is supposed to check whether or not
the PM QoS latency constraints of the devices in the domain will be
violated if the domain is turned off by pm_genpd_poweroff().
However, the computations carried out by it don't reflect the
definition of the PM QoS latency constrait in
Documentation/ABI/testing/sysfs-devices-power.

Make default_power_down_ok() follow the definition of the PM QoS
latency constrait.  In particular, make it only take latencies into
account, because it doesn't matter how much time has elapsed since
the domain's devices were suspended for the computation.

Remove the break_even_ns and power_off_time fields from
struct generic_pm_domain, because they are not necessary any more.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The existing default device stop governor function for PM domains,
default_stop_ok(), is supposed to check whether or not the device's
PM QoS latency constraint will be violated if the device is stopped
by pm_genpd_runtime_suspend().  However, the computations carried out
by it don't reflect the definition of the PM QoS latency constrait in
Documentation/ABI/testing/sysfs-devices-power.

Make default_stop_ok() follow the definition of the PM QoS latency
constrait.  In particular, make it take the device's start and stop
latencies correctly.

Add a new field, effective_constraint_ns, to struct gpd_timing_data
and use it to store the difference between the device's PM QoS
constraint and its resume latency for use by the device's parent
(the effective_constraint_ns values for the children are used for
computing the parent's one along with its PM QoS constraint).

Remove the break_even_ns field from struct gpd_timing_data, because
it's not used any more.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Pull power management fixes from Rafael J. Wysocki:
 "Fix for an issue causing hibernation to hang on systems with highmem
  (that practically means i386) due to broken memory management (bug
  introduced in 3.2, so -stable material) and PM documentation update
  making the freezer documentation follow the code again after some
  recent updates."

* tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Freezer / Docs: Update documentation about freezing of tasks
  PM / Hibernate: fix the number of pages used for hibernate/thaw buffering

The autofs packet size has had a very unfortunate size problem on x86:
because the alignment of 'u64' differs in 32-bit and 64-bit modes, and
because the packet data was not 8-byte aligned, the size of the autofsv5
packet structure differed between 32-bit and 64-bit modes despite
looking otherwise identical (300 vs 304 bytes respectively).

We first fixed that up by making the 64-bit compat mode know about this
problem in commit a32744d4 ("autofs: work around unhappy compat
problem on x86-64"), and that made a 32-bit 'systemd' work happily on a
64-bit kernel because everything then worked the same way as on a 32-bit
kernel.

But it turned out that 'automount' had actually known and worked around
this problem in user space, so fixing the kernel to do the proper 32-bit
compatibility handling actually *broke* 32-bit automount on a 64-bit
kernel, because it knew that the packet sizes were wrong and expected
those incorrect sizes.

As a result, we ended up reverting that compatibility mode fix, and
thus breaking systemd again, in commit fcbf94b9.

With both automount and systemd doing a single read() system call, and
verifying that they get *exactly* the size they expect but using
different sizes, it seemed that fixing one of them inevitably seemed to
break the other.  At one point, a patch I seriously considered applying
from Michael Tokarev did a "strcmp()" to see if it was automount that
was doing the operation.  Ugly, ugly.

However, a prettier solution exists now thanks to the packetized pipe
mode.  By marking the communication pipe as being packetized (by simply
setting the O_DIRECT flag), we can always just write the bigger packet
size, and if user-space does a smaller read, it will just get that
partial end result and the extra alignment padding will simply be thrown
away.

This makes both automount and systemd happy, since they now get the size
they asked for, and the kernel side of autofs simply no longer needs to
care - it could pad out the packet arbitrarily.

Of course, if there is some *other* user of autofs (please, please,
please tell me it ain't so - and we haven't heard of any) that tries to
read the packets with multiple writes, that other user will now be
broken - the whole point of the packetized mode is that one system call
gets exactly one packet, and you cannot read a packet in pieces.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The file Documentation/power/freezing-of-tasks.txt was still referencing
the TIF_FREEZE flag, that was removed by the commit
d88e4cb6(freezer: remove now unused
TIF_FREEZE).

This patch removes all the references of TIF_FREEZE that were left
behind.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The actual internal pipe implementation is already really about
individual packets (called "pipe buffers"), and this simply exposes that
as a special packetized mode.

When we are in the packetized mode (marked by O_DIRECT as suggested by
Alan Cox), a write() on a pipe will not merge the new data with previous
writes, so each write will get a pipe buffer of its own.  The pipe
buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn
will tell the reader side to break the read at that boundary (and throw
away any partial packet contents that do not fit in the read buffer).

End result: as long as you do writes less than PIPE_BUF in size (so that
the pipe doesn't have to split them up), you can now treat the pipe as a
packet interface, where each read() system call will read one packet at
a time.  You can just use a sufficiently big read buffer (PIPE_BUF is
sufficient, since bigger than that doesn't guarantee atomicity anyway),
and the return value of the read() will naturally give you the size of
the packet.

NOTE! We do not support zero-sized packets, and zero-sized reads and
writes to a pipe continue to be no-ops.  Also note that big packets will
currently be split at write time, but that the size at which that
happens is not really specified (except that it's bigger than PIPE_BUF).
Currently that limit is the system page size, but we might want to
explicitly support bigger packets some day.

The main user for this is going to be the autofs packet interface,
allowing us to stop having to care so deeply about exact packet sizes
(which have had bugs with 32/64-bit compatibility modes).  But user
space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will
fail with an EINVAL on kernels that do not support this interface.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org  # needed for systemd/autofs interaction fix
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are some tiny drivers/staging/ bugfixes.  Some build fixes that
  were recently reported, as well as one kfree bug that is hitting a
  number of users."

* tag 'staging-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ozwpan: Fix bug where kfree is called twice.
  staging: octeon-ethernet: fix build errors by including interrupt.h
  staging: zcache: fix Kconfig crypto dependency
  staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers

Pull btrfs fixes from Chris Mason:
 "This has our collection of bug fixes.  I missed the last rc because I
  thought our patches were making NFS crash during my xfs test runs.
  Turns out it was an NFS client bug fixed by someone else while I tried
  to bisect it.

  All of these fixes are small, but some are fairly high impact.  The
  biggest are fixes for our mount -o remount handling, a deadlock due to
  GFP_KERNEL allocations in readdir, and a RAID10 error handling bug.

  This was tested against both 3.3 and Linus' master as of this morning."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits)
  Btrfs: reduce lock contention during extent insertion
  Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir
  Btrfs: Fix space checking during fs resize
  Btrfs: fix block_rsv and space_info lock ordering
  Btrfs: Prevent root_list corruption
  Btrfs: fix repair code for RAID10
  Btrfs: do not start delalloc inodes during sync
  Btrfs: fix that check_int_data mount option was ignored
  Btrfs: don't count CRC or header errors twice while scrubbing
  Btrfs: fix btrfs_ioctl_dev_info() crash on missing device
  btrfs: don't return EINTR
  Btrfs: double unlock bug in error handling
  Btrfs: always store the mirror we read the eb from
  fs/btrfs/volumes.c: add missing free_fs_devices
  btrfs: fix early abort in 'remount'
  Btrfs: fix max chunk size check in chunk allocator
  Btrfs: add missing read locks in backref.c
  Btrfs: don't call free_extent_buffer twice in iterate_irefs
  Btrfs: Make free_ipath() deal gracefully with NULL pointers
  Btrfs: avoid possible use-after-free in clear_extent_bit()
  ...

Pull ARM SoC fixes from Olof Johansson:
 "Nothing controversial, just another batch of fixes:

   - Samsung/exynos fixes for more merge window fallout: build errors
     and warnings mostly, but also some clock/device setup issues on
     exynos4/5
   - PXA bug and warning fixes related to gpio and pinmux
   - IRQ domain conversion bugfixes for U300 and MSM
   - A regulator setup fix for U300"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: PXA2xx: MFP: fix potential direction bug
  ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT
  arm/sa1100: fix sa1100-rtc memory resource
  ARM: pxa: fix gpio wakeup setting
  ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability
  ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined
  ARM: EXYNOS: Fix resource on dev-dwmci.c
  ARM: S3C24XX: Fix build warning for S3C2410_PM
  ARM: mini2440_defconfig: Fix build error
  ARM: msm: Fix gic irqdomain support
  ARM: EXYNOS: Fix incorrect initialization of GIC
  ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers
  ARM: u300: bump all IRQ numbers by one
  ARM: ux300: Fix unimplementable regulation constraints

Pull drm fixes from Dave Airlie:
 "As soon as I sent the non-urgent stack, two important fixes come in:

   - i915: fixes SNB GPU hangs in a number of 3D apps

   - radeon: initial fix for VGA on LLano system, 3 or 4 of us have
     spent time debugging this, and Jerome finally figured out the magic
     bit the BIOS/fglrx set that we didn't.  This at least should get
     things working, there may be future reliability fixes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Set the Stencil Cache eviction policy to non-LRA mode.
  drm/radeon/kms: need to set up ss on DP bridges as well

This reverts commit a32744d4.

While that commit was technically the right thing to do, and made the
x86-64 compat mode work identically to native 32-bit mode (and thus
fixing the problem with a 32-bit systemd install on a 64-bit kernel), it
turns out that the automount binaries had workarounds for this compat
problem.

Now, the workarounds are disgusting: doing an "uname()" to find out the
architecture of the kernel, and then comparing it for the 64-bit cases
and fixing up the size of the read() in automount for those.  And they
were confused: it's not actually a generic 64-bit issue at all, it's
very much tied to just x86-64, which has different alignment for an
'u64' in 64-bit mode than in 32-bit mode.

But the end result is that fixing the compat layer actually breaks the
case of a 32-bit automount on a x86-64 kernel.

There are various approaches to fix this (including just doing a
"strcmp()" on current->comm and comparing it to "automount"), but I
think that I will do the one that teaches pipes about a special "packet
mode", which will allow user space to not have to care too deeply about
the padding at the end of the autofs packet.

That change will make the compat workaround unnecessary, so let's revert
it first, and get automount working again in compat mode.  The
packetized pipes will then fix autofs for systemd.
Reported-and-requested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Ian Kent <raven@themaw.net>
Cc: stable@kernel.org # for 3.3
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in
OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when
using separate stencil buffers.  Without it, the GPU tries to use the
LRA eviction policy, which isn't supported.  This was supposed to be off
by default, but seems to be on for many machines.

This cannot be done in gen6_init_clock_gating with most of the other
workaround bits; the render ring needs to exist.  Otherwise, the
register write gets dropped on the floor (one printk will show it
changed, but a second printk immediately following shows the value
reverts to the old one).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535
Cc: stable@vger.kernel.org
Cc: Rob Castle <futuredub@gmail.com>
Cc: Eric Appleman <erappleman@gmail.com>
Cc: aaron667@gmx.net
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Makes Nutmeg DP to VGA bridges work for me.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=42490

Noticed by Jerome Glisse (after weeks of debugging).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  Use correct conversion specifiers in cifs_show_options
  CIFS: Show backupuid/gid in /proc/mounts
  cifs: fix offset handling in cifs_iovec_write

Merge tag 'stable/for-linus-3.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Some of these had been in existence since the 2.6.27 days, some since
  3.0 - and some due to new features added in v3.4.

  The one that is most interesting is David's one - in the low-level
  assembler code we had be checking events needlessly.  With his patch
  now we do it when the appropriate flag is set - with the added benefit
  that we can process events faster.  Stefano's is fixing a mistake
  where the Linux IRQ numbers were ACK-ed instead of the Xen IRQ,
  resulting in missing interrupts.  The other ones are bootup related
  that can show up on various hardware."

 - In the low-level assembler code we would jump to check events even if
   none were present.  This incorrect behavior had been there since
   2.6.27 days!
 - When using the fast-path for ACK-ing interrupts we were using the
   Linux IRQ numbers instead of the Xen ones (and they can differ) and
   missing interrupts in process.
 - Fix bootup crashes when ACPI hotplug CPUs were present and they would
   expand past the set number of CPUs we were allocated.
 - Deal with broken BIOSes when uploading C-states to the hypervisor.
 - Disable the cpuid check for MWAIT_LEAF if the ACPI PAD driver is
   loaded.  If the ACPI PAD driver is used it will crash, so lets not
   export the functionality so the ACPI PAD driver won't load.

* tag 'stable/for-linus-3.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: correctly check for pending events when restoring irq flags
  xen/acpi: Workaround broken BIOSes exporting non-existing C-states.
  xen/smp: Fix crash when booting with ACPI hotplug CPUs.
  xen: use the pirq number to check the pirq_eoi_map
  xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded.

Pull misc SPI device driver bug fixes from Grant Likely.

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  spi/spi-bfin5xx: Fix flush of last bit after each spi transfer
  spi/spi-bfin5xx: fix reversed if condition in interrupt mode
  spi/spi_bfin_sport: drop bits_per_word from client data
  spi/bfin_spi: drop bits_per_word from client data
  spi/spi-bfin-sport: move word length setup to transfer handler
  spi/bfin5xx: rename config macro name for bfin5xx spi controller driver
  spi/pl022: Allow request for higher frequency than maximum possible
  spi/bcm63xx: set master driver mode_bits.
  spi/bcm63xx: don't use the stopping state
  spi/bcm63xx: convert to the pump message infrastructure
  spi/spi-ep93xx.c: use dma_transfer_direction instead of dma_data_direction
  spi: fix spi.h kernel-doc warning
  spi/pl022: Fix calculate_effective_freq()
  spi/pl022: Fix range checking for bits per word

Pull hwmon patches from Guenter Roeck:
 - Fix build warning in ad7314 driver
 - Fix pci_device_id array access in fam15h_power driver, introduced by
   commit 00250ec9 ("hwmon: fam15h_power: fix bogus values with
   current BIOSes")

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (fam15h_power) Fix pci_device_id array
  hwmon: (ad7314) Fix build warning

Pull drm fixes from Dave Airlie:
 "For your Friday pull request stack, nothing astounding or shattering
  this week some exynos, some intel, some radeon fixes.  One intel fix
  for a regression somwehere back in 2.6.35 land."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: use frac fb div on APUs
  drm/radeon: add a missing entry to encoder_names
  drm/i915: handle input/output sdvo timings separately in mode_set
  drm/i915: fix integer overflow in i915_gem_do_execbuffer()
  drm/i915: fix integer overflow in i915_gem_execbuffer2()
  drm/exynos: added missed vm area region mapping type.
  drm/exynos: fixed exynos_drm_gem_map_pages bug.
  drm/exynos: fixed duplicatd memory allocation bug.
  drm/i915: fixup load-detect on enabled, but not active pipe

Pull RCU fix from Ingo Molnar.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Permit call_rcu() from CPU_DYING notifiers

Pull x86 fixes from Ingo Molnar.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Use x2apic physical mode based on FADT setting
  x86/mrst: Quiet sparse noise about plain integer as NULL pointer
  x86, intel_cacheinfo: Fix error return code in amd_set_l3_disable_slot()

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix OOPS when build_sched_domains() percpu allocation fails
  sched: Fix more load-balancing fallout

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_for_each() to use sibling
  perf symbols: Read plt symbols from proper symtab_type binary
  tracing: Fix stacktrace of latency tracers (irqsoff and friends)
  perf tools: Add 'G' and 'H' modifiers to event parsing
  tracing: Fix regression with tracing_on
  perf tools: Drop CROSS_COMPILE from flex and bison calls
  perf report: Fix crash showing warning related to kernel maps
  tracing: Fix build breakage without CONFIG_PERF_EVENTS (again)

Pull build fixes for less mainstream architectures from Paul Gortmaker:
 "These are fixes for frv(1), blackfin(2), powerpc(1) and xtensa(4).

  Fortunately the touches are nearly all specific to files just used by
  the arch in question.  The two touches to shared/common files
  [kernel/irq/debug.h and drivers/pci/Makefile] are trivial to assess as
  no risk to anyone.

  Half of them relate to xtensa directly.  It was only when I fixed the
  last xtensa issue that I realized that the arch has been broken for a
  significant time, and isn't a specific v3.4 regression.  So if you
  wanted, we could leave xtensa lying bleeding in the street for a
  couple more weeks and queue those for 3.5.  But given they are no risk
  to anyone outside of xtensa, I figured to just leave them in.

  If you are OK with taking the xtensa fixes, then please pull to get:

   - one last implicit include uncovered by system.h that is in a file
     specific to just one powerpc defconfig.  (I'd sync'd with BenH).

   - fix an oversight in the PCI makefile where shared code wasn't being
     compiled for ARCH=frv

   - fix a missing include for GPIO in blackfin framebuffer.

   - audit and tag endif in blackfin ezkit board file, in order to find
     and fix the misplaced endif masking a block of code.

   - fix irq/debug.h choice of temporary macro names to be more internal
     so they don't conflict with names used by xtensa.

   - fix a reference to an undeclared local var in xtensa's signal.c

   - fix an implicit bug.h usage in xtensa's asm/io.h uncovered by my
     removing bug.h from kernel.h

   - fix xtensa to properly indicate it is using asm-generic/hardirq.h
     in order to resolve the link error - undefined ack_bad_irq

  The xtensa still fails final link as my latest binutils does something
  evil when ld forward-relocates unlikely() blocks, but in theory people
  who have older/valid toolchains could now use the thing."

* 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  xtensa: fix build fail on undefined ack_bad_irq
  blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c
  blackfin: fix compile error in bfin-lq035q1-fb.c
  pci: frv architecture needs generic setup-bus infrastructure
  irq: hide debug macros so they don't collide with others.
  xtensa: fix build error in xtensa/include/asm/io.h
  xtensa: fix build failure in xtensa/kernel/signal.c
  powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix up tracepoint build fallout from static key introduction.
  sh: Fix error synchronising kernel page tables

Pull security key doc update from Jeff Layton:
 "Ordinarily, I send my patches through others' trees, but David
  suggested I just send this one to you directly since it's just a
  Documentation/ update"

* 'docs-3.4' of git://git.samba.org/jlayton/linux:
  keys: update the documentation with info about "logon" keys

In xen_restore_fl_direct(), xen_force_evtchn_callback() was being
called even if no events were pending.  This resulted in (depending on
workload) about a 100 times as many xen_version hypercalls as
necessary.

Fix this by correcting the sense of the conditional jump.

This seems to give a significant performance benefit for some
workloads.

There is some subtle tricksy "..since the check here is trying to
check both pending and masked in a single cmpw, but I think this is
correct. It will call check_events now only when the combined
mask+pending word is 0x0001 (aka unmasked, pending)." (Ian)

CC: stable@kernel.org
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We're spending huge amounts of time on lock contention during
end_io processing because we unconditionally assume we are overwriting
an existing extent in the file for each IO.

This checks to see if we are outside i_size, and if so, it uses a
less expensive readonly search of the btree to look for existing
extents.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Btrfs has an optimization where it will preallocate dentries during
readdir to fill in enough information to open the inode without an extra
lookup.

But, we're calling d_alloc, which is doing GFP_KERNEL allocations, and
that leads to deadlocks because our readdir code has tree locks held.

For now, disable this optimization.  We'll fix the gfp mask in the next
merge window.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This patch ensures that the last bit of a transfer gets correctly
flushed out of the register.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

This condition is used to determine 8 bits or 16 and 32 bits transfer.
Obviously it is reversed.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Since the member was dropped from the common Blackfin header, we need
to stop using it in the SPORT driver too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

No other SPI controller has this field, and SPI clients should be setting
this up in their own drivers.  So drop it from the Blackfin controller to
keep people from using it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Each transfer may have its own bits per word.
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

This controller is only for blackfin 5xx soc, so rename it to BFIN5XX
Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Currently, if we request for frequency greater than maximum possible, spi driver
returns error.

For example, if the spi block src frequency is 333/4 MHz, i.e. 83.33.. MHz,
maximum frequency programmable would be src/2. Which would come around 41.6...

It is difficult to pass frequency in these figures. We normally try to program
in round figures, like 42 MHz and it should get programmed to <=
requested_frequency, i.e. 41.6...

For this to happen, we must not return error even if requested freq is higher
than max possible. But should program it to max possible.
Reported-by: Vinit Kamalaksha Shenoy <vinit.shenoy@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Fix out-of-space checking, addressing a warning and potential resource
leak when resizing the filesystem down while allocating blocks.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>