1. 14 Nov, 2014 23 commits
    • Joe Stringer's avatar
      net: Add vxlan_gso_check() helper · 23e62de3
      Joe Stringer authored
      Most NICs that report NETIF_F_GSO_UDP_TUNNEL support VXLAN, and not
      other UDP-based encapsulation protocols where the format and size of the
      header differs. This patch implements a generic ndo_gso_check() for
      VXLAN which will only advertise GSO support when the skb looks like it
      contains VXLAN (or no UDP tunnelling at all).
      
      Implementation shamelessly stolen from Tom Herbert:
      http://thread.gmane.org/gmane.linux.network/332428/focus=333111Signed-off-by: default avatarJoe Stringer <joestringer@nicira.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      23e62de3
    • David S. Miller's avatar
      Merge tag 'master-2014-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless · 8a5809e0
      David S. Miller authored
      John W. Linville says:
      
      ====================
      pull request: wireless 2014-11-13
      
      Please pull this set of a few more wireless fixes intended for the
      3.18 stream...
      
      For the mac80211 bits, Johannes says:
      
      "This has just one fix, for an issue with the CCMP decryption
      that can cause a kernel crash. I'm not sure it's remotely
      exploitable, but it's an important fix nonetheless."
      
      For the iwlwifi bits, Emmanuel says:
      
      "Two fixes here - we weren't updating mac80211 if a scan
      was cut short by RFKILL which confused cfg80211. As a
      result, the latter wouldn't allow to run another scan.
      Liad fixes a small bug in the firmware dump."
      
      On top of that...
      
      Arend van Spriel corrects a channel width conversion that caused a
      WARNING in brcmfmac.
      
      Hauke Mehrtens avoids a NULL pointer dereference in b43.
      
      Larry Finger hits a trio of rtlwifi bugs left over from recent
      backporting from the Realtek vendor driver.
      
      Miaoqing Pan fixes a clocking problem in ath9k that could affect
      packet timestamps and such.
      
      Stanislaw Gruszka addresses an payload alignment issue that has been
      plaguing rt2x00.
      
      Please let me know if there are problems!
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8a5809e0
    • Vincent BENAYOUN's avatar
      inetdevice: fixed signed integer overflow · 84bc8868
      Vincent BENAYOUN authored
      There could be a signed overflow in the following code.
      
      The expression, (32-logmask) is comprised between 0 and 31 included.
      It may be equal to 31.
      In such a case the left shift will produce a signed integer overflow.
      According to the C99 Standard, this is an undefined behavior.
      A simple fix is to replace the signed int 1 with the unsigned int 1U.
      Signed-off-by: default avatarVincent BENAYOUN <vincent.benayoun@trust-in-soft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84bc8868
    • Linus Torvalds's avatar
      Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost · b23dc5a7
      Linus Torvalds authored
      Pull virtio bugfix from Michael S Tsirkin:
       "This fixes a crash in virtio console multi-channel mode that got
        introduced in -rc1"
      
      * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
        virtio_console: move early VQ enablement
      b23dc5a7
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 5cf52037
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) sunhme driver lacks DMA mapping error checks, based upon a report by
          Meelis Roos.
      
       2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
      
       3) DMA memory allocation sizes are wrong in systemport ethernet driver,
          fix from Florian Fainelli.
      
       4) Fix use after free in mac80211 defragmentation code, from Johannes
          Berg.
      
       5) Some networking uapi headers missing from Kbuild file, from Stephen
          Hemminger.
      
       6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
          and macvtap has a similar bug, from Herbert Xu.
      
       7) Adjust several tunneling drivers to set dev->iflink after registry,
          because registry sets that to -1 overwriting whatever we did.  From
          Steffen Klassert.
      
       8) Geneve forgets to set inner tunneling type, causing GSO segmentation
          to fail on some NICs.  From Jesse Gross.
      
       9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
          Giuseppe CAVALLARO.
      
      10) Fix spurious timeouts with NewReno on low traffic connections, from
          Marcelo Leitner.
      
      11) Fix descriptor updates in enic driver, from Govindarajulu
          Varadarajan.
      
      12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
          Fix from Takashi Iwai.
      
      13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
          Borkmann.
      
      14) psock_fanout selftest accesses past the end of the mmap ring, fix
          from Shuah Khan.
      
      15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
      
      16) netlink_unbind() calls in netlink pass wrong initial argument, from
          Hiroaki SHIMODA.
      
      17) vxlan socket reuse accidently reuses a socket when the address
          family is different, so we have to explicitly check this, from
          Marcelo Lietner.
      
      18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
          and other architectures, from Guenter Roeck.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
        vxlan: Do not reuse sockets for a different address family
        smsc911x: power-up phydev before doing a software reset.
        lib: rhashtable - Remove weird non-ASCII characters from comments
        net/smsc911x: Fix delays in the PHY enable/disable routines
        net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
        netlink: Properly unbind in error conditions.
        net: ptp: fix time stamp matching logic for VLAN packets.
        cxgb4 : dcb open-lldp interop fixes
        selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
        net: bcmgenet: apply MII configuration in bcmgenet_open()
        net: bcmgenet: connect and disconnect from the PHY state machine
        net: qualcomm: Fix dependency
        ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
        net: phy: Correctly handle MII ioctl which changes autonegotiation.
        ipv6: fix IPV6_PKTINFO with v4 mapped
        net: sctp: fix memory leak in auth key management
        net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
        net: ppp: Don't call bpf_prog_create() in ppp_lock
        net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
        cxgb4 : Fix bug in DCB app deletion
        ...
      5cf52037
    • Linus Torvalds's avatar
      Merge branch 'akpm' (fixes from Andrew Morton) · 971ad4e4
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton:
       "15 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        MAINTAINERS: add IIO include files
        kernel/panic.c: update comments for print_tainted
        mem-hotplug: reset node present pages when hot-adding a new pgdat
        mem-hotplug: reset node managed pages when hot-adding a new pgdat
        mm/debug-pagealloc: correct freepage accounting and order resetting
        fanotify: fix notification of groups with inode & mount marks
        mm, compaction: prevent infinite loop in compact_zone
        mm: alloc_contig_range: demote pages busy message from warn to info
        mm/slab: fix unalignment problem on Malta with EVA due to slab merge
        mm/page_alloc: restrict max order of merging on isolated pageblock
        mm/page_alloc: move freepage counting logic to __free_one_page()
        mm/page_alloc: add freepage on isolate pageblock to correct buddy list
        mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype
        mm/compaction: skip the range until proper target pageblock is met
        zram: avoid kunmap_atomic() of a NULL pointer
      971ad4e4
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · b0ab3f19
      Linus Torvalds authored
      Pull Ceph fixes from Sage Weil:
       "There is an overflow bug fix for cephfs from Zheng, a fix for handling
        large authentication ticket buffers in libceph from Ilya, and a few
        fixes for the request handling code from Ilya that affect RBD volumes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        libceph: change from BUG to WARN for __remove_osd() asserts
        libceph: clear r_req_lru_item in __unregister_linger_request()
        libceph: unlink from o_linger_requests when clearing r_osd
        libceph: do not crash on large auth tickets
        ceph: fix flush tid comparision
      b0ab3f19
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 6b07974a
      Linus Torvalds authored
      Pull HID fixes from Jiri Kosina:
      
       - fix for an oops in HID core upon repeated subdriver insertion/removal
         under certain circumstances, by Benjamin Tissoires
      
       - quirk for another Elan Touchscreen device, by Adel Gadllah
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: core: cleanup .claimed field on disconnect
        HID: usbhid: enable always-poll quirk for Elan Touchscreen 0103
      6b07974a
    • Daniel Baluta's avatar
      MAINTAINERS: add IIO include files · 8fe671fc
      Daniel Baluta authored
      Files under include/linux/iio were not reported as part of the IIO
      subsystem.
      Signed-off-by: default avatarDaniel Baluta <daniel.baluta@intel.com>
      Reported-by: default avatarCristina Ciocan <cristina.ciocan@intel.com>
      Reviewed-by: default avatarJingoo Han <jg1.han@samsung.com>
      Cc: Hartmut Knaack <knaack.h@gmx.de>
      Cc: Lars-Peter Clausen <lars@metafoo.de>
      Cc: Peter Meerwald <pmeerw@pmeerw.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8fe671fc
    • Xie XiuQi's avatar
      kernel/panic.c: update comments for print_tainted · bc53a3f4
      Xie XiuQi authored
      Commit 69361eef ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag,
      but failed to update the comments for print_tainted().  So, update the
      comments.
      Signed-off-by: default avatarXie XiuQi <xiexiuqi@huawei.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bc53a3f4
    • Tang Chen's avatar
      mem-hotplug: reset node present pages when hot-adding a new pgdat · 0bd85420
      Tang Chen authored
      When memory is hot-added, all the memory is in offline state.  So clear
      all zones' present_pages because they will be updated in online_pages()
      and offline_pages().  Otherwise, /proc/zoneinfo will corrupt:
      
      When the memory of node2 is offline:
      
        # cat /proc/zoneinfo
        ......
        Node 2, zone   Movable
        ......
              spanned  8388608
              present  8388608
              managed  0
      
      When we online memory on node2:
      
        # cat /proc/zoneinfo
        ......
        Node 2, zone   Movable
        ......
              spanned  8388608
              present  16777216
              managed  8388608
      Signed-off-by: default avatarTang Chen <tangchen@cn.fujitsu.com>
      Reviewed-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>	[3.16+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0bd85420
    • Tang Chen's avatar
      mem-hotplug: reset node managed pages when hot-adding a new pgdat · f784a3f1
      Tang Chen authored
      In free_area_init_core(), zone->managed_pages is set to an approximate
      value for lowmem, and will be adjusted when the bootmem allocator frees
      pages into the buddy system.
      
      But free_area_init_core() is also called by hotadd_new_pgdat() when
      hot-adding memory.  As a result, zone->managed_pages of the newly added
      node's pgdat is set to an approximate value in the very beginning.
      
      Even if the memory on that node has node been onlined,
      /sys/device/system/node/nodeXXX/meminfo has wrong value:
      
        hot-add node2 (memory not onlined)
        cat /sys/device/system/node/node2/meminfo
        Node 2 MemTotal:       33554432 kB
        Node 2 MemFree:               0 kB
        Node 2 MemUsed:        33554432 kB
        Node 2 Active:                0 kB
      
      This patch fixes this problem by reset node managed pages to 0 after
      hot-adding a new node.
      
      1. Move reset_managed_pages_done from reset_node_managed_pages() to
         reset_all_zones_managed_pages()
      2. Make reset_node_managed_pages() non-static
      3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat
         is initialized
      Signed-off-by: default avatarTang Chen <tangchen@cn.fujitsu.com>
      Signed-off-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>	[3.16+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f784a3f1
    • Joonsoo Kim's avatar
      mm/debug-pagealloc: correct freepage accounting and order resetting · 57cbc87e
      Joonsoo Kim authored
      One thing I did in this patch is fixing freepage accounting.  If we
      clear guard page and link it onto isolate buddy list, we should not
      increase freepage count.  This patch adds conditional branch to skip
      counting in this case.  Without this patch, this overcounting happens
      frequently if guard order is set and CMA is used.
      
      Another thing fixed in this patch is the target to reset order.  In
      __free_one_page(), we check the buddy page whether it is a guard page or
      not.  And, if so, we should clear guard attribute on the buddy page and
      reset order of it to 0.  But, current code resets original page's order
      rather than buddy one's.  Maybe, this doesn't have any problem, because
      whole merged page's order will be re-assigned soon.  But, it is better
      to correct code.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      57cbc87e
    • Jan Kara's avatar
      fanotify: fix notification of groups with inode & mount marks · 8edc6e16
      Jan Kara authored
      fsnotify() needs to merge inode and mount marks lists when notifying
      groups about events so that ignore masks from inode marks are reflected
      in mount mark notifications and groups are notified in proper order
      (according to priorities).
      
      Currently the sorting of the lists done by fsnotify_add_inode_mark() /
      fsnotify_add_vfsmount_mark() and fsnotify() differed which resulted
      ignore masks not being used in some cases.
      
      Fix the problem by always using the same comparison function when
      sorting / merging the mark lists.
      
      Thanks to Heinrich Schuchardt for improvements of my patch.
      
      Link: https://bugzilla.kernel.org/show_bug.cgi?id=87721Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Reported-by: default avatarHeinrich Schuchardt <xypron.glpk@gmx.de>
      Tested-by: default avatarHeinrich Schuchardt <xypron.glpk@gmx.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8edc6e16
    • Vlastimil Babka's avatar
      mm, compaction: prevent infinite loop in compact_zone · 1d5bfe1f
      Vlastimil Babka authored
      Several people have reported occasionally seeing processes stuck in
      compact_zone(), even triggering soft lockups, in 3.18-rc2+.
      
      Testing a revert of commit e14c720e ("mm, compaction: remember
      position within pageblock in free pages scanner") fixed the issue,
      although the stuck processes do not appear to involve the free scanner.
      
      Finally, by code inspection, the bug was found in isolate_migratepages()
      which uses a slightly different condition to detect if the migration and
      free scanners have met, than compact_finished().  That has not been a
      problem until commit e14c720e allowed the free scanner position
      between individual invocations to be in the middle of a pageblock.
      
      In a relatively rare case, the migration scanner position can end up at
      the beginning of a pageblock, with the free scanner position in the
      middle of the same pageblock.  If it's the migration scanner's turn,
      isolate_migratepages() exits immediately (without updating the
      position), while compact_finished() decides to continue compaction,
      resulting in a potentially infinite loop.  The system can recover only
      if another process creates enough high-order pages to make the watermark
      checks in compact_finished() pass.
      
      This patch fixes the immediate problem by bumping the migration
      scanner's position to meet the free scanner in isolate_migratepages(),
      when both are within the same pageblock.  This causes compact_finished()
      to terminate properly.  A more robust check in compact_finished() is
      planned as a cleanup for better future maintainability.
      
      Fixes: e14c720e ("mm, compaction: remember position within pageblock in free pages scanner)
      Signed-off-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Reported-by: default avatarP. Christeas <xrg@linux.gr>
      Tested-by: default avatarP. Christeas <xrg@linux.gr>
      Link: http://marc.info/?l=linux-mm&m=141508604232522&w=2Reported-by: default avatarNorbert Preining <preining@logic.at>
      Tested-by: default avatarNorbert Preining <preining@logic.at>
      Link: https://lkml.org/lkml/2014/11/4/904Reported-by: default avatarPavel Machek <pavel@ucw.cz>
      Link: https://lkml.org/lkml/2014/11/7/164
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1d5bfe1f
    • Michal Nazarewicz's avatar
      mm: alloc_contig_range: demote pages busy message from warn to info · dae803e1
      Michal Nazarewicz authored
      Having test_pages_isolated failure message as a warning confuses users
      into thinking that it is more serious than it really is.  In reality, if
      called via CMA, allocation will be retried so a single
      test_pages_isolated failure does not prevent allocation from succeeding.
      
      Demote the warning message to an info message and reformat it such that
      the text "failed" does not appear and instead a less worrying "PFNS
      busy" is used.
      
      This message is trivially reproducible on a 10GB x86 machine on 3.16.y
      kernels configured with CONFIG_DMA_CMA.
      Signed-off-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
      Cc: Peter Hurley <peter@hurleysoftware.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dae803e1
    • Joonsoo Kim's avatar
      mm/slab: fix unalignment problem on Malta with EVA due to slab merge · 95069ac8
      Joonsoo Kim authored
      Unlike SLUB, sometimes, object isn't started at the beginning of the
      slab in SLAB.  This causes the unalignment problem after slab merging is
      supported by commit 12220dea ("mm/slab: support slab merge").
      
      Following is the report from Markos that fail to boot on Malta with EVA.
      
          Calibrating delay loop... 19.86 BogoMIPS (lpj=99328)
          pid_max: default: 32768 minimum: 301
          Mount-cache hash table entries: 4096 (order: 0, 16384 bytes)
          Mountpoint-cache hash table entries: 4096 (order: 0, 16384 bytes)
          Kernel bug detected[#1]:
          CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-05639-g12220dea #1631
          task: 1f04f5d8 ti: 1f050000 task.ti: 1f050000
          epc   : 80141190 alloc_unbound_pwq+0x234/0x304
              Not tainted
          ra    : 80141184 alloc_unbound_pwq+0x228/0x304
          Process swapper/0 (pid: 1, threadinfo=1f050000, task=1f04f5d8, tls=00000000)
          Call Trace:
            alloc_unbound_pwq+0x234/0x304
            apply_workqueue_attrs+0x11c/0x294
            __alloc_workqueue_key+0x23c/0x470
            init_workqueues+0x320/0x400
            do_one_initcall+0xe8/0x23c
            kernel_init_freeable+0x9c/0x224
            kernel_init+0x10/0x100
            ret_from_kernel_thread+0x14/0x1c
          [ end trace cb88537fdc8fa200 ]
          Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
      
      alloc_unbound_pwq() allocates slab object from pool_workqueue.  This
      kmem_cache requires 256 bytes alignment, but, current merging code
      doesn't honor that, and merge it with kmalloc-256.  kmalloc-256 requires
      only cacheline size alignment so that above failure occurs.  However, in
      x86, kmalloc-256 is luckily aligned in 256 bytes, so the problem didn't
      happen on it.
      
      To fix this problem, this patch introduces alignment mismatch check in
      find_mergeable().  This will fix the problem.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Reported-by: default avatarMarkos Chandras <Markos.Chandras@imgtec.com>
      Tested-by: default avatarMarkos Chandras <Markos.Chandras@imgtec.com>
      Acked-by: default avatarChristoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      95069ac8
    • Joonsoo Kim's avatar
      mm/page_alloc: restrict max order of merging on isolated pageblock · 3c605096
      Joonsoo Kim authored
      Current pageblock isolation logic could isolate each pageblock
      individually.  This causes freepage accounting problem if freepage with
      pageblock order on isolate pageblock is merged with other freepage on
      normal pageblock.  We can prevent merging by restricting max order of
      merging to pageblock order if freepage is on isolate pageblock.
      
      A side-effect of this change is that there could be non-merged buddy
      freepage even if finishing pageblock isolation, because undoing
      pageblock isolation is just to move freepage from isolate buddy list to
      normal buddy list rather than to consider merging.  So, the patch also
      makes undoing pageblock isolation consider freepage merge.  When
      un-isolation, freepage with more than pageblock order and it's buddy are
      checked.  If they are on normal pageblock, instead of just moving, we
      isolate the freepage and free it in order to get merged.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3c605096
    • Joonsoo Kim's avatar
      mm/page_alloc: move freepage counting logic to __free_one_page() · 8f82b55d
      Joonsoo Kim authored
      All the caller of __free_one_page() has similar freepage counting logic,
      so we can move it to __free_one_page().  This reduce line of code and
      help future maintenance.
      
      This is also preparation step for "mm/page_alloc: restrict max order of
      merging on isolated pageblock" which fix the freepage counting problem
      on freepage with more than pageblock order.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8f82b55d
    • Joonsoo Kim's avatar
      mm/page_alloc: add freepage on isolate pageblock to correct buddy list · 51bb1a40
      Joonsoo Kim authored
      In free_pcppages_bulk(), we use cached migratetype of freepage to
      determine type of buddy list where freepage will be added.  This
      information is stored when freepage is added to pcp list, so if
      isolation of pageblock of this freepage begins after storing, this
      cached information could be stale.  In other words, it has original
      migratetype rather than MIGRATE_ISOLATE.
      
      There are two problems caused by this stale information.
      
      One is that we can't keep these freepages from being allocated.
      Although this pageblock is isolated, freepage will be added to normal
      buddy list so that it could be allocated without any restriction.  And
      the other problem is incorrect freepage accounting.  Freepages on
      isolate pageblock should not be counted for number of freepage.
      
      Following is the code snippet in free_pcppages_bulk().
      
          /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
          __free_one_page(page, page_to_pfn(page), zone, 0, mt);
          trace_mm_page_pcpu_drain(page, 0, mt);
          if (likely(!is_migrate_isolate_page(page))) {
              __mod_zone_page_state(zone, NR_FREE_PAGES, 1);
              if (is_migrate_cma(mt))
                  __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
          }
      
      As you can see above snippet, current code already handle second
      problem, incorrect freepage accounting, by re-fetching pageblock
      migratetype through is_migrate_isolate_page(page).
      
      But, because this re-fetched information isn't used for
      __free_one_page(), first problem would not be solved.  This patch try to
      solve this situation to re-fetch pageblock migratetype before
      __free_one_page() and to use it for __free_one_page().
      
      In addition to move up position of this re-fetch, this patch use
      optimization technique, re-fetching migratetype only if there is isolate
      pageblock.  Pageblock isolation is rare event, so we can avoid
      re-fetching in common case with this optimization.
      
      This patch also correct migratetype of the tracepoint output.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarMinchan Kim <minchan@kernel.org>
      Acked-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      51bb1a40
    • Joonsoo Kim's avatar
      mm/page_alloc: fix incorrect isolation behavior by rechecking migratetype · ad53f92e
      Joonsoo Kim authored
      Before describing bugs itself, I first explain definition of freepage.
      
       1. pages on buddy list are counted as freepage.
       2. pages on isolate migratetype buddy list are *not* counted as freepage.
       3. pages on cma buddy list are counted as CMA freepage, too.
      
      Now, I describe problems and related patch.
      
      Patch 1: There is race conditions on getting pageblock migratetype that
      it results in misplacement of freepages on buddy list, incorrect
      freepage count and un-availability of freepage.
      
      Patch 2: Freepages on pcp list could have stale cached information to
      determine migratetype of buddy list to go.  This causes misplacement of
      freepages on buddy list and incorrect freepage count.
      
      Patch 4: Merging between freepages on different migratetype of
      pageblocks will cause freepages accouting problem.  This patch fixes it.
      
      Without patchset [3], above problem doesn't happens on my CMA allocation
      test, because CMA reserved pages aren't used at all.  So there is no
      chance for above race.
      
      With patchset [3], I did simple CMA allocation test and get below
      result:
      
       - Virtual machine, 4 cpus, 1024 MB memory, 256 MB CMA reservation
       - run kernel build (make -j16) on background
       - 30 times CMA allocation(8MB * 30 = 240MB) attempts in 5 sec interval
       - Result: more than 5000 freepage count are missed
      
      With patchset [3] and this patchset, I found that no freepage count are
      missed so that I conclude that problems are solved.
      
      On my simple memory offlining test, these problems also occur on that
      environment, too.
      
      This patch (of 4):
      
      There are two paths to reach core free function of buddy allocator,
      __free_one_page(), one is free_one_page()->__free_one_page() and the
      other is free_hot_cold_page()->free_pcppages_bulk()->__free_one_page().
      Each paths has race condition causing serious problems.  At first, this
      patch is focused on first type of freepath.  And then, following patch
      will solve the problem in second type of freepath.
      
      In the first type of freepath, we got migratetype of freeing page
      without holding the zone lock, so it could be racy.  There are two cases
      of this race.
      
       1. pages are added to isolate buddy list after restoring orignal
          migratetype
      
          CPU1                                   CPU2
      
          get migratetype => return MIGRATE_ISOLATE
          call free_one_page() with MIGRATE_ISOLATE
      
                                      grab the zone lock
                                      unisolate pageblock
                                      release the zone lock
      
          grab the zone lock
          call __free_one_page() with MIGRATE_ISOLATE
          freepage go into isolate buddy list,
          although pageblock is already unisolated
      
      This may cause two problems.  One is that we can't use this page anymore
      until next isolation attempt of this pageblock, because freepage is on
      isolate buddy list.  The other is that freepage accouting could be wrong
      due to merging between different buddy list.  Freepages on isolate buddy
      list aren't counted as freepage, but ones on normal buddy list are
      counted as freepage.  If merge happens, buddy freepage on normal buddy
      list is inevitably moved to isolate buddy list without any consideration
      of freepage accouting so it could be incorrect.
      
       2. pages are added to normal buddy list while pageblock is isolated.
          It is similar with above case.
      
      This also may cause two problems.  One is that we can't keep these
      freepages from being allocated.  Although this pageblock is isolated,
      freepage would be added to normal buddy list so that it could be
      allocated without any restriction.  And the other problem is same as
      case 1, that it, incorrect freepage accouting.
      
      This race condition would be prevented by checking migratetype again
      with holding the zone lock.  Because it is somewhat heavy operation and
      it isn't needed in common case, we want to avoid rechecking as much as
      possible.  So this patch introduce new variable, nr_isolate_pageblock in
      struct zone to check if there is isolated pageblock.  With this, we can
      avoid to re-check migratetype in common case and do it only if there is
      isolated pageblock or migratetype is MIGRATE_ISOLATE.  This solve above
      mentioned problems.
      
      Changes from v3:
      Add one more check in free_one_page() that checks whether migratetype is
      MIGRATE_ISOLATE or not. Without this, abovementioned case 1 could happens.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarMinchan Kim <minchan@kernel.org>
      Acked-by: default avatarMichal Nazarewicz <mina86@mina86.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Laura Abbott <lauraa@codeaurora.org>
      Cc: Heesub Shin <heesub.shin@samsung.com>
      Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
      Cc: Ritesh Harjani <ritesh.list@gmail.com>
      Cc: Gioh Kim <gioh.kim@lge.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ad53f92e
    • Joonsoo Kim's avatar
      mm/compaction: skip the range until proper target pageblock is met · 58420016
      Joonsoo Kim authored
      Commit 7d49d886 ("mm, compaction: reduce zone checking frequency in
      the migration scanner") has a side-effect that changes the iteration
      range calculation.  Before the change, block_end_pfn is calculated using
      start_pfn, but now it blindly adds pageblock_nr_pages to the previous
      value.
      
      This causes the problem that isolation_start_pfn is larger than
      block_end_pfn when we isolate the page with more than pageblock order.
      In this case, isolation would fail due to an invalid range parameter.
      
      To prevent this, this patch implements skipping the range until a proper
      target pageblock is met.  Without this patch, CMA with more than
      pageblock order always fails but with this patch it will succeed.
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      58420016
    • Weijie Yang's avatar
      zram: avoid kunmap_atomic() of a NULL pointer · c4065152
      Weijie Yang authored
      zram could kunmap_atomic() a NULL pointer in a rare situation: a zram
      page becomes a full-zeroed page after a partial write io.  The current
      code doesn't handle this case and performs kunmap_atomic() on a NULL
      pointer, which panics the kernel.
      
      This patch fixes this issue.
      Signed-off-by: default avatarWeijie Yang <weijie.yang@samsung.com>
      Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Cc: Dan Streetman <ddstreet@ieee.org>
      Cc: Nitin Gupta <ngupta@vflare.org>
      Cc: Weijie Yang <weijie.yang.kh@gmail.com>
      Acked-by: default avatarJerome Marchand <jmarchan@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c4065152
  2. 13 Nov, 2014 17 commits
    • Marcelo Leitner's avatar
      vxlan: Do not reuse sockets for a different address family · 19ca9fc1
      Marcelo Leitner authored
      Currently, we only match against local port number in order to reuse
      socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound
      to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will
      follow. The following steps reproduce it:
      
         # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \
             srcport 5000 6000 dev eth0
         # ip link add vxlan7 type vxlan id 43 group ff0e::110 \
             srcport 5000 6000 dev eth0
         # ip link set vxlan6 up
         # ip link set vxlan7 up
         <panic>
      
      [    4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
      ...
      [    4.188076] Call Trace:
      [    4.188085]  [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630
      [    4.188098]  [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan]
      [    4.188113]  [<ffffffff810a3430>] process_one_work+0x220/0x710
      [    4.188125]  [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710
      [    4.188138]  [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0
      [    4.188149]  [<ffffffff810a3920>] ? process_one_work+0x710/0x710
      
      So address family must also match in order to reuse a socket.
      Reported-by: default avatarJean-Tsung Hsiao <jhsiao@redhat.com>
      Signed-off-by: default avatarMarcelo Ricardo Leitner <mleitner@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      19ca9fc1
    • Enric Balletbo i Serra's avatar
      smsc911x: power-up phydev before doing a software reset. · ccf899a2
      Enric Balletbo i Serra authored
      With commit be9dad1f ("net: phy: suspend phydev when going
      to HALTED"), the PHY device will be put in a low-power mode using
      BMCR_PDOWN if the the interface is set down. The smsc911x driver does
      a software_reset opening the device driver (ndo_open). In such case,
      the PHY must be powered-up before access to any register and before
      calling the software_reset function. Otherwise, as the PHY is powered
      down the software reset fails and the interface can not be enabled
      again.
      
      This patch fixes this scenario that is easy to reproduce setting down
      the network interface and setting up again.
      
          $ ifconfig eth0 down
          $ ifconfig eth0 up
          ifconfig: SIOCSIFFLAGS: Input/output error
      Signed-off-by: default avatarEnric Balletbo i Serra <eballetbo@iseebcn.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ccf899a2
    • Herbert Xu's avatar
      lib: rhashtable - Remove weird non-ASCII characters from comments · 0c828f2f
      Herbert Xu authored
      My editor spewed garbage that looked like memory corruption on
      my screen.  It turns out that a number of occurences of "fi" got
      turned into a ligature.
      
      This patch replaces these ligatures with the ASCII letters "fi".
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      
      Cheers,
      Acked-by: default avatarThomas Graf <tgraf@suug.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c828f2f
    • Alexander Kochetkov's avatar
      net/smsc911x: Fix delays in the PHY enable/disable routines · 6ff53fd3
      Alexander Kochetkov authored
      Increased delay in the smsc911x_phy_disable_energy_detect (from 1ms to 2ms).
      Dropped delays in the smsc911x_phy_enable_energy_detect (100ms and 1ms).
      
      The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221).
      
      I saw problems with soft reset due to wrong udelay timings.
      After I fixed udelay, I measured the time needed to bring integrated PHY
      from power-down to operational mode (the time beetween clearing EDPWRDOWN
      bit and soft reset complete event). I got 1ms (measured using ktime_get).
      The value is equal to the current value (1ms) used in the
      smsc911x_phy_disable_energy_detect. It is near the upper bound and in order
      to avoid rare soft reset faults it is doubled (2ms).
      
      I don't know official timing for bringing up integrated PHY as specs doesn't
      clarify this (or may be I didn't found).
      
      It looks safe to drop delays before and after setting EDPWRDOWN bit
      (enable PHY power-down mode). I didn't saw any regressions with the patch.
      
      The patch was reviewed by Steve Glendinning and Microchip Team.
      Signed-off-by: default avatarAlexander Kochetkov <al.kochet@gmail.com>
      Acked-by: default avatarSteve Glendinning <steve.glendinning@shawell.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ff53fd3
    • Alexander Kochetkov's avatar
      net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode · 242bcd5b
      Alexander Kochetkov authored
      The patch affect SMSC LAN generation 4 chips with integrated PHY (LAN9221).
      
      It is possible that PHY could enter power-down mode (ENERGYON clear),
      between ENERGYON bit check in smsc911x_phy_disable_energy_detect and SRST
      bit set in smsc911x_soft_reset. This could happen, for example, if someone
      disconnect ethernet cable between the checks. The PHY in a power-down mode
      would prevent the MAC portion of chip to be software reseted.
      
      Initially found by code review, confirmed later using test case.
      
      This is low probability issue, and in order to reproduce it you have to
      run the script:
      
      while true; do
      	ifconfig eth0 down
      	ifconfig eth0 up || break
      done
      
      While the script is running you have to plug/unplug ethernet cable many
      times (using gpio controlled ethernet switch, for example) until get:
      
      [ 4516.477783] ADDRCONF(NETDEV_UP): eth0: link is not ready
      [ 4516.512207] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336
      [ 4516.524658] ADDRCONF(NETDEV_UP): eth0: link is not ready
      [ 4516.559082] smsc911x smsc911x.0: eth0: SMSC911x/921x identified at 0xce006000, IRQ: 336
      [ 4516.571990] ADDRCONF(NETDEV_UP): eth0: link is not ready
      ifconfig: SIOCSIFFLAGS: Input/output error
      
      The patch was reviewed by Steve Glendinning and Microchip Team.
      Signed-off-by: default avatarAlexander Kochetkov <al.kochet@gmail.com>
      Acked-by: default avatarSteve Glendinning <steve.glendinning@shawell.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      242bcd5b
    • Ilya Dryomov's avatar
      libceph: change from BUG to WARN for __remove_osd() asserts · cc9f1f51
      Ilya Dryomov authored
      No reason to use BUG_ON for osd request list assertions.
      Signed-off-by: default avatarIlya Dryomov <idryomov@redhat.com>
      Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      cc9f1f51
    • Ilya Dryomov's avatar
      libceph: clear r_req_lru_item in __unregister_linger_request() · ba9d114e
      Ilya Dryomov authored
      kick_requests() can put linger requests on the notarget list.  This
      means we need to clear the much-overloaded req->r_req_lru_item in
      __unregister_linger_request() as well, or we get an assertion failure
      in ceph_osdc_release_request() - !list_empty(&req->r_req_lru_item).
      
      AFAICT the assumption was that registered linger requests cannot be on
      any of req->r_req_lru_item lists, but that's clearly not the case.
      Signed-off-by: default avatarIlya Dryomov <idryomov@redhat.com>
      Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      ba9d114e
    • Ilya Dryomov's avatar
      libceph: unlink from o_linger_requests when clearing r_osd · a390de02
      Ilya Dryomov authored
      Requests have to be unlinked from both osd->o_requests (normal
      requests) and osd->o_linger_requests (linger requests) lists when
      clearing req->r_osd.  Otherwise __unregister_linger_request() gets
      confused and we trip over a !list_empty(&osd->o_linger_requests)
      assert in __remove_osd().
      
      MON=1 OSD=1:
      
          # cat remove-osd.sh
          #!/bin/bash
          rbd create --size 1 test
          DEV=$(rbd map test)
          ceph osd out 0
          sleep 3
          rbd map dne/dne # obtain a new osdmap as a side effect
          rbd unmap $DEV & # will block
          sleep 3
          ceph osd in 0
      Signed-off-by: default avatarIlya Dryomov <idryomov@redhat.com>
      Reviewed-by: default avatarAlex Elder <elder@linaro.org>
      a390de02
    • Ilya Dryomov's avatar
      libceph: do not crash on large auth tickets · aaef3170
      Ilya Dryomov authored
      Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth
      tickets will have their buffers vmalloc'ed, which leads to the
      following crash in crypto:
      
      [   28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0
      [   28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80
      [   28.686032] PGD 0
      [   28.688088] Oops: 0000 [#1] PREEMPT SMP
      [   28.688088] Modules linked in:
      [   28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305
      [   28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
      [   28.688088] Workqueue: ceph-msgr con_work
      [   28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000
      [   28.688088] RIP: 0010:[<ffffffff81392b42>]  [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80
      [   28.688088] RSP: 0018:ffff8800d903f688  EFLAGS: 00010286
      [   28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0
      [   28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750
      [   28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880
      [   28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010
      [   28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000
      [   28.688088] FS:  00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000
      [   28.688088] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [   28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0
      [   28.688088] Stack:
      [   28.688088]  ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32
      [   28.688088]  ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020
      [   28.688088]  ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010
      [   28.688088] Call Trace:
      [   28.688088]  [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40
      [   28.688088]  [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40
      [   28.688088]  [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220
      [   28.688088]  [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180
      [   28.688088]  [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30
      [   28.688088]  [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0
      [   28.688088]  [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0
      [   28.688088]  [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60
      [   28.688088]  [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0
      [   28.688088]  [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360
      [   28.688088]  [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0
      [   28.688088]  [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80
      [   28.688088]  [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0
      [   28.688088]  [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80
      [   28.688088]  [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0
      [   28.688088]  [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0
      [   28.688088]  [<ffffffff81559289>] try_read+0x1e59/0x1f10
      
      This is because we set up crypto scatterlists as if all buffers were
      kmalloc'ed.  Fix it.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarIlya Dryomov <idryomov@redhat.com>
      Reviewed-by: default avatarSage Weil <sage@redhat.com>
      aaef3170
    • Yan, Zheng's avatar
      ceph: fix flush tid comparision · 3231300b
      Yan, Zheng authored
      TID of cap flush ack is 64 bits, but ceph_inode_info::flushing_cap_tid
      is only 16 bits. 16 bits should be plenty to let the cap flush updates
      pipeline appropriately, but we need to cast in the proper direction when
      comparing these differently-sized versions. So downcast the 64-bits one
      to 16 bits.
      
      Reflects ceph.git commit a5184cf46a6e867287e24aeb731634828467cd98.
      Signed-off-by: default avatarYan, Zheng <zyan@redhat.com>
      Reviewed-by: default avatarIlya Dryomov <idryomov@redhat.com>
      3231300b
    • Linus Torvalds's avatar
      Merge tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 3b98ec4e
      Linus Torvalds authored
      Pull sound fixes from Takashi Iwai:
       "Things get calming down, now we have only a few fix patches: a trivial
        fix for memory leak in usb-audio, a patch for the new HD-audio PCI id,
        a device-specific mute-LED fix, and a slightly big patch to cover the
        missing COEF inits of various Realtek codecs"
      
      * tag 'sound-3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
        ALSA: hda - Add mute LED control for Lenovo Ideapad Z560
        ALSA: hda/realtek - Change EAPD to verb control
        ALSA: usb-audio: Fix memory leak in FTU quirk
        ALSA: hda_intel: Add DeviceIDs for Sunrise Point-LP
      3b98ec4e
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security · 2c54396e
      Linus Torvalds authored
      Pull SELinux fixlet from James Morris:
       "WARN_ONCE() here will unnecessarily terrify users"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
        selinux: convert WARN_ONCE() to printk() in selinux_nlmsg_perm()
      2c54396e
    • Linus Torvalds's avatar
      Merge branch 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit · 91188375
      Linus Torvalds authored
      Pull audit fixes from Paul Moore:
       "After he sent the initial audit pull request for 3.18, Eric asked me
        to take over the management of the audit tree, hence this pull request
        to fix a couple of problems with audit.
      
        As you can see below, the changes are minimal: adding some whitespace
        to a string so userspace parses it correctly, and fixing a problem
        with audit's usage of fsnotify that was causing audit watch rules to
        be lost.  Neither of these patches were very controversial on the
        mailing lists and they fix real problems, getting them into 3.18 would
        be a good thing"
      
      * 'stable-3.18' of git://git.infradead.org/users/pcmoore/audit:
        audit: keep inode pinned
        audit: AUDIT_FEATURE_CHANGE message format missing delimiting space
      91188375
    • Linus Torvalds's avatar
      Merge tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm · 5a7a662c
      Linus Torvalds authored
      Pull device mapper fixes from Mike Snitzer:
      
       - stable fix for dm-thin that avoids normal IO racing with discard
      
       - stable fix for a dm-cache related bug in dm-btree walking code that
         results from using very large fast device (eg 4T) with a very small
         cache blocksize (eg 32K) -- this is a very uncommon configuration
      
       - a couple fixes for dm-raid (one for stable and the other addresses a
         crash in 3.18-rc1 code)
      
       - stable fix for dm-thinp that addresses a very rare dm-bufio bug
         having to do with memory reclaimation (via shrinker) when using
         dm-thinp ontop of loopback devices
      
       - fix a leak in dm-stripe target constructor's error path
      
      * tag 'dm-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
        dm btree: fix a recursion depth bug in btree walking code
        dm thin: grab a virtual cell before looking up the mapping
        dm raid: fix inaccessible superblocks causing oops in configure_discard_support
        dm raid: ensure superblock's size matches device's logical block size
        dm bufio: change __GFP_IO to __GFP_FS in shrinker callbacks
        dm stripe: fix potential for leak in stripe_ctr error path
      5a7a662c
    • James Morris's avatar
    • Takashi Iwai's avatar
      ALSA: hda - Add mute LED control for Lenovo Ideapad Z560 · 3542aed7
      Takashi Iwai authored
      Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin
      0x1b on CX20585 codec.  (EAPD bit on corresponds to mute LED on.)
      The machine doesn't need other EAPD, so the fixup concentrates on
      controlling EAPD 0x1b following the vmaster state (but inversely).
      
      Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315Reported-by: default avatarSzymon Kowalczyk <fazerxlo@o2.pl>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      3542aed7
    • Cornelia Huck's avatar
      virtio_console: move early VQ enablement · 65eca3a2
      Cornelia Huck authored
      Commit f5866db6 (virtio_console: enable VQs early) tried to make
      sure that DRIVER_OK was set when virtio_console started using its
      virtqueues. Doing this in add_port(), however, means that we try
      to set DRIVER_OK again when when a port is dynamically added after
      the probe function is done.
      
      Let's move virtio_device_ready() to the probe function just before
      trying to use the virtqueues instead. This is fine as nothing can
      fail inbetween.
      Reported-by: default avatarThomas Graf <tgraf@suug.ch>
      Reviewed-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Signed-off-by: default avatarCornelia Huck <cornelia.huck@de.ibm.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      65eca3a2