- 15 Jul, 2024 40 commits
-
-
Nathan Chancellor authored
Several recent patches added static stubs to btmtk.h without the inline keyword, which causes instances of -Wunused-function when those stubs are not used anywhere in a file that includes the header: In file included from drivers/bluetooth/btusb.c:28: drivers/bluetooth/btmtk.h:254:13: warning: 'btmtk_fw_get_filename' defined but not used [-Wunused-function] 254 | static void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, | ^~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:249:12: warning: 'btmtk_process_coredump' defined but not used [-Wunused-function] 249 | static int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb) | ^~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:243:12: warning: 'btmtk_register_coredump' defined but not used [-Wunused-function] 243 | static int btmtk_register_coredump(struct hci_dev *hdev, const char *name, | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:233:12: warning: 'btmtk_setup_firmware' defined but not used [-Wunused-function] 233 | static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname, | ^~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:227:12: warning: 'btmtk_setup_firmware_79xx' defined but not used [-Wunused-function] 227 | static int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname, | ^~~~~~~~~~~~~~~~~~~~~~~~~ Add inline to all the stubs in btmtk.h (even ones that do not currently have any warnings associated with them) to ensure there are never unused function warnings from these stubs, as is customary for the kernel. Signed-off-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This fixes the following build error introduced by b80f4e3b ("Bluetooth: hci_qca: schedule a devm action for disabling the clock"): drivers/bluetooth/hci_qca.c: In function ‘qca_serdev_remove’: drivers/bluetooth/hci_qca.c:2501:2: error: label at end of compound statement 2501 | default: | ^~~~~~~ Fixes: b80f4e3b ("Bluetooth: hci_qca: schedule a devm action for disabling the clock") Signed-off-by:
-
Bartosz Golaszewski authored
In preparation for using the power sequencing subsystem on sm8650 boards and X13s laptop let's make pwrseq the default for wcn7850 and wcn6855. Both these models require an enable GPIO so we can safely assume that if the property is not there, then we should try to get the power sequencer. Due to how the pwrseq lookup works - checking the provider at run-time - we cannot really do it the other way around as we'd get stuck forever on -EPROBE_DEFER. If the relevant OF node does have the 'enable-gpios' property, we fallback to the existing code for backward compatibility with older DTs. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Bartosz Golaszewski authored
If the device has a power sequencing handle, use it first. Otherwise fall back to whatever code already exists. Signed-off-by:
-
Bartosz Golaszewski authored
Now that all three branches of the switch end up doing the same thing, we can move the call to hci_uart_register_device() past it and unify the error message. Signed-off-by:
-
Bartosz Golaszewski authored
In preparation for unduplicating the hci_uart registration code, schedule a devres action for disabling the SUSCLK rather than doing it manually. We cannot really use devm_clk_get_enabled() as we also set the rate before enabling the clock. While this should in theory work, I don't want to risk breaking existing users. One solution for the future is to add devm_clk_get_enabled_with_rate() to the clock framework. Signed-off-by:
-
Bartosz Golaszewski authored
Drop the inputs from the host and instead expect the Bluetooth node to consume the outputs of the internal PMU. This model is closer to reality than how we represent it now. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
Neeraj Sanjay Kale authored
This fixes the warnings 'nxp_serdev_resume' and 'nxp_serdev_suspend' defined but not used. Signed-off-by:
Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407100518.06Xxq5PK-lkp@intel.com/Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds handling for system suspend and resume. While the host enters suspend state, the driver will drive the chip into low power state. Similarly when system is resuming, the driver will wake up the chip. Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds support for IW615 chipset with it's bootloader signature and firmware file. Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds support for AW693 A1 chipset with it's bootloader signature and firmware file. No firmware name change needed for AW693 A0 chipset. Signed-off-by:
-
Kiran K authored
from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0039 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Kiran K authored
Add support for BlazarU core (CNVi). Signed-off-by:
-
Chris Lu authored
This patch implements functions for ISO data send and receive in btusb driver for MediaTek's controller. MediaTek defines a specific interrupt endpoint for ISO data transmissin because the characteristics of interrupt endpoint are similar to the application of ISO data which can support guaranteed transmissin bandwidth, enough maximum data length and error checking mechanism. Driver sets up ISO interface and endpoints in btusb_mtk_setup and clears the setup in btusb_mtk_shutdown. These flow can't move to btmtk.c due to btusb_driver is only defined in btusb.c when claiming/relaesing interface. ISO packet anchor stops when driver suspending and resubmit interrupt urb for ISO data when driver resuming. Signed-off-by:
Chris Lu <chris.lu@mediatek.com> Signed-off-by:
-
Chris Lu authored
Move btusb_recv_acl_mtk from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Chris Lu authored
Move btusb_mtk_[setup, shutdown] and related function from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Signed-off-by:
-
Chris Lu authored
Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element defined in btmtk.h Signed-off-by:
-
Chris Lu authored
Add suspend/resum callback function in btusb_data which are reserved for vendor specific usage during suspend/resume. hdev->suspend will be added before stop traffic in btusb_suspend and hdev-> resume will be added after resubmit urb in btusb_resume. Signed-off-by:
-
Chris Lu authored
Rename btmediatek_data to have a consistent prefix throughout the driver. Signed-off-by:
-
Chris Lu authored
Update the code to immediately return an error code if accessing a related register fails. This ensures that our desired logic for subsequent register operations is maintained and allows us to promptly catch any unexpected errors. Signed-off-by:
-
Chris Lu authored
Remove the unnecessary goto tag whether there is an error or not, we have to free the buffer at the end of the function. Signed-off-by:
-
Luiz Augusto von Dentz authored
This removes hci_request.{c,h} since it shall no longer be used. Signed-off-by: -
Luiz Augusto von Dentz authored
This removes the dependencies of hci_req_init and hci_request_cancel_all from hci_sync.c. Signed-off-by: -
Luiz Augusto von Dentz authored
This moves handling of interleave_scan work to hci_sync.c since hci_request.c is deprecated. Signed-off-by: -
Luiz Augusto von Dentz authored
This replaces the instance of hci_prepare_cmd with hci_cmd_sync_alloc since the former is part of hci_request.c which is considered deprecated. Signed-off-by: -
Luiz Augusto von Dentz authored
hci_request functions are considered deprecated so this replaces the usage of hci_req_sync with hci_inquiry_sync. Signed-off-by: -
Rafał Miłecki authored
This helps validating DTS files. Introduced changes: 1. Dropped serial details from example 2. Added required example include Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
-
Luiz Augusto von Dentz authored
__hci_cmd_sync_status shall only be used if hci_req_sync_lock is _not_ required which is not the case of hci_dev_cmd so it needs to use hci_cmd_sync_status which uses hci_req_sync_lock internally. Fixes: f1a8f402 ("Bluetooth: L2CAP: Fix deadlock") Reported-by:
Pauli Virtanen <pav@iki.fi> Signed-off-by:
-
WangYuli authored
Add the support ID(0x13d3, 0x3591) to usb_device_id table for Realtek RTL8852BE. The device table is as follows: T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3591 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by:
Wentao Guan <guanwentao@uniontech.com> Signed-off-by:
WangYuli <wangyuli@uniontech.com> Signed-off-by:
-
Dmitry Antipov authored
Remove unused and set but otherwise unused 'discovery_old_state' and 'sco_last_tx' members of 'struct hci_dev'. The first one is a leftover after commit 182ee45d ("Bluetooth: hci_sync: Rework hci_suspend_notifier"); the second one is originated from ancient 2.4.19 and I was unable to find any actual use since that. Signed-off-by:
Dmitry Antipov <dmantipov@yandex.ru> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Kiran K authored
Use INTEL_HW_VARIANT() instead of CNVi Id to decide to load Intermediate Loader (IML) image. Fix the driver loading incorrect firmware for BlazarU product. dmesg: ..... [146.111834] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [146.111839] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 16362 [146.111848] Bluetooth: hci0: No support for _PRR ACPI method [146.112204] Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0291-0291-iml.sfi (-2) Fixes: 164c62f9 ("Bluetooth: btintel: Add firmware ID to firmware name") Reported-by:
Tsigan, Vladislav <vladislav.tsigan@intel.com> Signed-off-by:
-
Bartosz Golaszewski authored
We unnecessarily fallthrough the case for QCA6390 when initializing the device and hit the condition where - due to the lack of the enable-gpio - we disable power management despite using the power sequencer. We don't need to look for clocks on this model so it makes more sense to just register the hci device and break the switch. Reported-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 9a15ce68 ("Bluetooth: qca: use the power sequencer for QCA6390") Signed-off-by:
-
Krzysztof Kozlowski authored
BT_HCIUART_QCA, which is a bool and an HCI UART component, uses now power sequencing, so we need to be sure BT_HCIUART_QCA=y and POWER_SEQUENCING=m cannot happen: /usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_serdev_probe': drivers/bluetooth/hci_qca.c:2401:(.text+0xc48): undefined reference to `devm_pwrseq_get' /usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_shutdown': drivers/bluetooth/hci_qca.c:2192:(.text+0x29e8): undefined reference to `pwrseq_power_off' /usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_on': drivers/bluetooth/hci_qca.c:1808:(.text+0x3390): undefined reference to `pwrseq_power_on' Fixes: 9a15ce68 ("Bluetooth: qca: use the power sequencer for QCA6390") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
Paul Menzel authored
Fixes: f3b845e0 ("Bluetooth: btintel: Add support to download intermediate loader") Cc: Kiran K <kiran.k@intel.com> Signed-off-by:
-
Bartosz Golaszewski authored
Use the pwrseq subsystem's consumer API to run the power-up sequence for the Bluetooth module of the QCA6390 package. Tested-by:
Amit Pundir <amit.pundir@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T Signed-off-by:
-
Bartosz Golaszewski authored
QCA6390 has a compatible listed in the bindings but is missing the regulators description. Add the missing supply property and list the required ones in the allOf section. Reviewed-by:
-
Luiz Augusto von Dentz authored
Merge tag 'pwrseq-initial-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into HEAD Initial implementation of the power sequencing subsystem for linux v6.11
-
Kiran K authored
From BlazarI onwards, driver shall append the firmware ID (usually represents transport type) while constructing the firmware name. Firmware ID is returned on Intel Read Version command. The new firmware file name for operational image and ddc file shall be, ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step-fw_id>.[sfi|ddc] dmesg snippet from BlazarI pcie product: ...... [17.098858] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-pci.sfi [17.098871] Bluetooth: hci0: Boot Address: 0x10000800 [17.098872] Bluetooth: hci0: Firmware Version: 214-25.24 [17.158229] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [17.158236] Bluetooth: BNEP filters: protocol multicast [17.158241] Bluetooth: BNEP socket layer initialized [17.468789] Bluetooth: hci0: Waiting for firmware download to complete [17.468793] Bluetooth: hci0: Firmware loaded in 361262 usecs [17.468872] Bluetooth: hci0: Waiting for device to boot [17.504148] Bluetooth: hci0: Device booted in 34512 usecs [17.504148] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [17.504682] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-pci.ddc [17.505380] Bluetooth: hci0: Applying Intel DDC parameters completed [17.505622] Bluetooth: hci0: Firmware timestamp 2024.25 buildtype 3 build 64726 [17.505624] Bluetooth: hci0: Firmware SHA1: 0x9f4adddc [17.505838] Bluetooth: hci0: Fseq status: Success (0x00) [17.505839] Bluetooth: hci0: Fseq executed: 00.00.04.183 [17.505840] Bluetooth: hci0: Fseq BT Top: 00.00.04.183 dmesg snippet from BlazarI usb product: ....... [14.212072] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-usb.sfi [14.212091] Bluetooth: hci0: Boot Address: 0x10000800 [14.212093] Bluetooth: hci0: Firmware Version: 79-21.24 [14.262125] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [14.262129] Bluetooth: BNEP filters: protocol multicast [14.262133] Bluetooth: BNEP socket layer initialized [15.865421] Bluetooth: hci0: Waiting for firmware download to complete [15.865991] Bluetooth: hci0: Firmware loaded in 1615150 usecs [15.866017] Bluetooth: hci0: Waiting for device to boot [15.899934] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.899942] Bluetooth: hci0: Device booted in 33139 usecs [15.900172] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0190-0291-usb.ddc [15.901928] Bluetooth: hci0: Applying Intel DDC parameters completed [15.904993] Bluetooth: hci0: Firmware timestamp 2024.21 buildtype 3 build 63311 [15.904996] Bluetooth: hci0: Firmware SHA1: 0x8b217cf7 [15.908929] Bluetooth: hci0: Fseq status: Success (0x00) [15.908934] Bluetooth: hci0: Fseq executed: 00.00.04.180 [15.908935] Bluetooth: hci0: Fseq BT Top: 00.00.04.180 Signed-off-by:
-
Dmitry Antipov authored
After commit 78db544b ("Bluetooth: hci_core: Remove le_restart_scan work"), 'scan_start' and 'scan_duration' of 'struct discovery_state' are still initialized but actually unused. So remove the aforementioned fields and adjust 'hci_discovery_filter_clear()' and 'le_scan_disable()' accordingly. Compile tested only. Fixes: 78db544b ("Bluetooth: hci_core: Remove le_restart_scan work") Signed-off-by:
-
Hilda Wu authored
Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Hilda Wu <hildawu@realtek.com> Signed-off-by:
-
