- 22 Apr, 2024 16 commits
-
-
Fabio Estevam authored
Since commit 63b0cd30 ("media: ov2680: Add bus-cfg / endpoint property verification") the ov2680 driver no longer probes when the 'data-lanes' property is absent. The OV2680 sensor has only one data lane, so there is no need for describing it the devicetree. Remove the unnecessary data-lanes property check. Suggested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Fixes: 63b0cd30 ("media: ov2680: Add bus-cfg / endpoint property verification") Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Umang Jain authored
The sensor gain (both analog and digital) are controlled by a single gain value where: - 0dB to 30dB correspond to analog gain - 30.3dB to 72dB correspond to digital gain (with 0.3dB step) Hence, limit the analogue gain value to 100. For digital gain, support can be added later if needed. Signed-off-by:
Umang Jain <umang.jain@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by:
Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by:
-
Umang Jain authored
The imx335 reports a recommended pixel area of - 2592x1944. The driver supported mode however limits it to height=1940. Fix the height discrepency by correctly the value of height (with updates to vblank and mode registers). The IMX335_REG_HTRIMMING should also be corrected to the start offset(i.e. 48) instead of chosing a abritrary crop start of 384. Signed-off-by:
-
Umang Jain authored
Consider integer values for registers that are related to various sizes in the register map. This helps in improving the overall readability. No functional changes intended in this patch. Signed-off-by:
-
Umang Jain authored
Use the new comon CCI register access helpers to replace the private register access helpers in the imx335 driver. Select V4L2_CCI_I2C Kconfig option which the imx335 driver now depends on. Signed-off-by:
-
Kieran Bingham authored
Call the V4L2 fwnode device parser to handle controls that are standardised by the framework. Signed-off-by:
-
Kieran Bingham authored
The IMX335 can support both 2 and 4 lane configurations. Extend the driver to configure the lane mode accordingly. Update the pixel rate depending on the number of lanes in use. Signed-off-by:
-
Sakari Ailus authored
If the control handler is in an error state, return that error immediately in v4l2_ctrl_new_fwnode_properties(). Effectively the change here is that the same error code (handler's error) is returned in all cases instead of possibly returning -EINVAL. Signed-off-by:
-
Sakari Ailus authored
Use the current firmware path in linux-firmware repository. Check the older paths still in order to avoid causing issues to the users. Signed-off-by:
-
Sakari Ailus authored
Turn on the privacy LED only if streamon succeeds. This can be done after enabling streaming on the sensor. Fixes: b6e10ff6 ("media: v4l2-core: Make the v4l2-core code enable/disable the privacy LED if present") Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
-
Jai Luthra authored
After the frame is submitted to DMA, it may happen that the submitted list is not updated soon enough, and the DMA callback is triggered before that. This can lead to kernel crashes, so move everything in a single lock/unlock section to prevent such races. Fixes: b4a3d877 ("media: ti: Add CSI2RX support for J721E") Signed-off-by:
Jai Luthra <j-luthra@ti.com> Signed-off-by:
-
Pratyush Yadav authored
When the source device is operating above 1.5 Gbps per lane, it needs to send the Skew Calibration Sequence before sending any HS data. If the DPHY is initialized after the source stream is started, then it might miss the sequence and not be able to receive data properly. Move the start of source subdev to the end of the sequence to make sure everything is ready to receive data before the source starts streaming. Signed-off-by:
Pratyush Yadav <p.yadav@ti.com> Fixes: 3295cf12 ("media: cadence: Add support for external dphy") Tested-by:
Julien Massot <julien.massot@collabora.com> Tested-by:
Changhuang Liang <Changhuang.liang@starfivetech.com> Reviewed-by:
-
Hans Verkuil authored
First the media device node was created, and if successful it was marked as 'registered'. This leaves a small race condition where an application can open the device node and get an error back because the 'registered' flag was not yet set. Change the order: first set the 'registered' flag, then actually register the media device node. If that fails, then clear the flag. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: cf4b9211 ("[media] media: Media device node support") Cc: stable@vger.kernel.org Signed-off-by:
-
Alexander Stein authored
Absolute path to other DT schema is preferred over relative one. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Alexander Stein authored
Allow properties from video-interface-devices. This aligns the bindings to sony,imx415.yaml. Changes inspired by commit e2e73ed4 ("media: dt-bindings: sony,imx415: Allow props from video-interface-devices") Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
-
Hans Verkuil authored
Merge tag 'tags/media-next-imx-20240419' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git into media_stage NXP media drivers improvements. Signed-off-by:
-
- 19 Apr, 2024 2 commits
-
-
Alexander Stein authored
In case the hardware only supports just one pipeline, explicitly refuse port@1 in ports node. Signed-off-by:
-
Stefan Klug authored
The Samsung CSIS MIPI receiver provides a start-of-frame interrupt and a framecount register. As the CSI receiver is the hardware unit that lies closest to the sensor, the frame counter is the best we can get on these devices. In case of the ISI available on the i.MX8 M Plus it is also the only native start-of-frame signal available. This patch exposes the sof interrupt and the framecount as V4L2_EVENT_FRAME_SYNC event on the subdevice. It was tested on a Debix-Som-A with a 6.8-rc4 kernel. Reviewed-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by:
Stefan Klug <stefan.klug@ideasonboard.com> Link: https://lore.kernel.org/r/20240314093652.56923-1-stefan.klug@ideasonboard.comSigned-off-by:
-
- 15 Apr, 2024 22 commits
-
-
Ricardo Ribalda authored
USB urbs must be allocated with usb_alloc_urb. Quoting the manual Only use this function (usb_init_urb) if you _really_ understand what you are doing. Fix the following smatch error: drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures Signed-off-by:
Ricardo Ribalda <ribalda@chromium.org> Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch warnings: WARNING:PRINTK_WITHOUT_KERN_LEVEL: printk() should include KERN_<LEVEL> facility level WARNING:PREFER_PR_LEVEL: Prefer [subsystem eg: netdev]_dbg([subsystem]dev, ... then dev_dbg(dev, ... then pr_debug(... to printk(KERN_DEBUG ... WARNING:EMBEDDED_FUNCTION_NAME: Prefer using '"%s...", __func__' to using 'ciintf_slot_ts_enable', this function's name, in a string CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'level' may be better as '(level)' to avoid precedence issues There was no consistent style of logging functions used so far. Convert all logging to the appropriate pr_* macros. Add a global pr_fmt macro for the whole driver. Signed-off-by:
Stefan Herdler <herdler@nurfuerspam.de> Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch warnings: WARNING:RETURN_VOID: void function return statements are not generally useful WARNING:TRAILING_SEMICOLON: macros should not use a trailing semicolon Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch warnings: WARNING:CONSTANT_COMPARISON: Comparisons should place the constant on the right side of the test Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch errors: ERROR:TRAILING_STATEMENTS: trailing statements should be on next line Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch errors: ERROR:ASSIGN_IN_IF: do not use assignment in if condition Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch warnings: WARNING:EXPORT_SYMBOL: EXPORT_SYMBOL(foo); should immediately follow its function/variable Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch warnings and errors: WARNING:BRACES: braces {} are not necessary for any arm of this statement WARNING:BRACES: braces {} are not necessary for single statement blocks ERROR:OPEN_BRACE: that open brace { should be on the previous line CHECK:BRACES: braces {} should be used on all arms of this statement CHECK:BRACES: Unbalanced braces around else statement Signed-off-by: -
Stefan Herdler authored
This patch fixes the following checkpatch warnings: WARNING:BLOCK_COMMENT_STYLE: Block comments use * on subsequent lines WARNING:BLOCK_COMMENT_STYLE: Block comments use a trailing */ on a separate line WARNING: It's generally not useful to have the filename in the file Signed-off-by:
-
Stefan Herdler authored
It fixes the following checkpatch errors: ERROR:SPACING: space prohibited before that ',' (ctx:WxW) ERROR:SPACING: space required after that ',' (ctx:VxV) ERROR:SWITCH_CASE_INDENT_LEVEL: switch and case should be at the same indent This patch contains the large multi line blocks. Signed-off-by:
-
Stefan Herdler authored
This patch fixes the following checkpatch warnings and errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" ERROR:POINTER_LOCATION: "foo* bar" should be "foo *bar" ERROR:SPACING: space prohibited after that open parenthesis '(' ERROR:SPACING: space prohibited before that close parenthesis ')' ERROR:SPACING: space prohibited before that ',' (ctx:WxW) ERROR:SPACING: space required after that ',' (ctx:VxV) ERROR:SPACING: space required before that '-' (ctx:OxV) ERROR:SPACING: space required before the open parenthesis '(' ERROR:SPACING: spaces required around that '!=' (ctx:VxO) ERROR:SPACING: spaces required around that '<' (ctx:VxV) ERROR:SPACING: spaces required around that '=' (ctx:VxV) ERROR:SPACING: spaces required around that '>=' (ctx:VxV) WARNING:SPACING: space prohibited between function name and open parenthesis '(' WARNING:TABSTOP: Statements should start on a tabstop WARNING:LEADING_SPACE: please, no spaces at the start of a line WARNING:SUSPECT_CODE_INDENT: suspect code indent for conditional statements WARNING:LINE_SPACING: Missing a blank line after declarations Signed-off-by: -
Ricardo Ribalda authored
i2c_device_probe(), seems to assume that irq = 0 means that there is no irq to request. The driver also believes that on the clean path. So lets be consistent here. Also make smatch happy. Fix: drivers/media/i2c/adv7180.c:1526 adv7180_probe() warn: 'client->irq' from request_threaded_irq() not released on lines: 1526 Signed-off-by:
-
Ricardo Ribalda authored
Simplify a bit the code introducing a new variable for iterating through the control list. It also makes smatch happy: drivers/media/v4l2-core/v4l2-ctrls-api.c:1091 v4l2_query_ext_ctrl() warn: iterator used outside loop: 'ref' Signed-off-by:
-
Ricardo Ribalda authored
hva->clk cannot be NULL at this point. Simplify the code and make smatch happy: drivers/media/platform/st/sti/hva/hva-hw.c:412 hva_hw_probe() warn: 'hva->clk' from clk_prepare() not released on lines: 412 Signed-off-by:
-
Ricardo Ribalda authored
Fix smatch error: drivers/media/spi/cxd2880-spi.c:391 cxd2880_start_feed() warn: Please consider using kzalloc instead of kmalloc Signed-off-by:
-
Ricardo Ribalda authored
Add missing release_firmware on the error paths. drivers/media/usb/dvb-usb/dib0700_devices.c:2415 stk9090m_frontend_attach() warn: 'state->frontend_firmware' from request_firmware() not released on lines: 2415. drivers/media/usb/dvb-usb/dib0700_devices.c:2497 nim9090md_frontend_attach() warn: 'state->frontend_firmware' from request_firmware() not released on lines: 2489,2497. Signed-off-by:
-
Ricardo Ribalda authored
Do not cache the file, instead load it on demand. This makes smatch a happy parser: drivers/media/dvb-frontends/drx39xyj/drxj.c:11908 drx_ctrl_u_code() warn: 'fw' from request_firmware() not released on lines: 11877,11886,11896. Signed-off-by:
-
Ricardo Ribalda authored
Make sure the firmware is released when we leave xc_load_fw_and_init_tuner() This change makes smatch happy: drivers/media/tuners/xc5000.c:1213 xc_load_fw_and_init_tuner() warn: 'fw' from request_firmware() not released on lines: 1213. Cc: Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
-
Ricardo Ribalda authored
release_firmware() in the same function that it was requested. It is more clear and makes smatch happy. drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-core.c:1146 load_c8sectpfe_fw() warn: 'fw' from request_firmware() not released on lines: 1125,1132. Signed-off-by:
-
Ricardo Ribalda authored
The handled version of request_irq let us remove the free_irq and makes smatch happier: drivers/media/pci/saa7134/saa7134-alsa.c:1186 alsa_card_saa7134_create() warn: 'dev->pci->irq' from request_irq() not released on lines: 1186 Signed-off-by:
-
Ricardo Ribalda authored
Let devm handle the life cycle of the irq request. Makes smatch happier: drivers/media/pci/solo6x10/solo6x10-core.c:631 solo_pci_probe() warn: 'pdev' from pci_request_regions() not released on lines: 631. Signed-off-by:
-
Ricardo Ribalda authored
Instead of handling manually the release of the memory regions let devm do that for us. Makes smatch happy: drivers/media/pci/solo6x10/solo6x10-core.c:631 solo_pci_probe() warn: 'pdev' from pci_request_regions() not released on lines: 631. Signed-off-by:
-
