- 08 May, 2016 2 commits
-
-
Vinod Koul authored
Noticed two typos in Documentation, so fix them up Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
M-Audio Profire 610 has an unexpected value in version field of its config ROM, thus ALSA dice driver is not assigned to the model due to a mismatch of modalias. This commit adds an entry to support the model. I expect the entry is also for Profire 2626. I note that Profire 610 uses TCD2220 (so-called Dice Jr.), and supports a part of Extended Application Protocol (EAP). $ cd linux-firewire-utils/src $ ./crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ------------------------------------------------------------ 400 04047689 bus_info_length 4, crc_length 4, crc 30345 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 000d6c04 company_id 000d6c | 410 04400002 device_id 0404400002 | EUI-64 000d6c0404400002 root directory ------------------------------------------------------------ 414 000695fe directory_length 6, crc 38398 418 03000d6c vendor 41c 8100000a --> descriptor leaf at 444 420 17000011 model 424 8100000d --> descriptor leaf at 458 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ------------------------------------------------------------ 430 0004fb14 directory_length 4, crc 64276 434 12000d6c specifier id 438 130100d1 version 43c 17000011 model 440 8100000c --> descriptor leaf at 470 descriptor leaf at 444 ------------------------------------------------------------ 444 0004b8e4 leaf_length 4, crc 47332 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 4d2d4175 "M-Au" 454 64696f00 "dio" descriptor leaf at 458 ------------------------------------------------------------ 458 00053128 leaf_length 5, crc 12584 45c 00000000 textual descriptor 460 00000000 minimal ASCII 464 50726f46 "ProF" 468 69726520 "ire " 46c 36313000 "610" descriptor leaf at 470 ------------------------------------------------------------ 470 00053128 leaf_length 5, crc 12584 474 00000000 textual descriptor 478 00000000 minimal ASCII 47c 50726f46 "ProF" 480 69726520 "ire " 484 36313000 "610" $ cat /proc/asound/card1/dice sections: global: offset 10, size 90 tx: offset 100, size 142 rx: offset 242, size 282 ext_sync: offset 524, size 4 unused2: offset 0, size 0 global: owner: ffc0:000100000000 notification: 00000040 nick name: FW610 clock select: internal 48000 enable: 1 status: locked 48000 ext status: 00000040 sample rate: 48000 version: 1.0.4.0 clock caps: 32000 44100 48000 88200 96000 176400 192000 aes1 aes4 aes adat tdif wc arx1 arx2 internal clock source names: SPDIF\AES34\AES56\TOS\AES_ANY\ADAT\ADAT_AUX\Word Clock\Unused\Unused\Unused\Unused\Internal\\ ... Signed-off-by:Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
- 29 Apr, 2016 1 commit
-
-
Takashi Iwai authored
There are many USB audio devices with buggy firmware that don't react with the sample rate reading properly. This often results in the flood of error messages and slowing down the operation. The sample rate read back is basically only for confirming the sample rate setup, and it's not critically important. As a compromise, in this patch, we stop the sample rate read back once when the device gives errors more than tolerance (twice, as of now). This should improve most of error cases while we still can catch the firmware bugginess. Signed-off-by:
-
- 26 Apr, 2016 5 commits
-
-
Takashi Iwai authored
For taking back the recent change of HDA HDMI fixes for i915 HSW/BDW. Signed-off-by: -
Takashi Iwai authored
The recent bug report suggests that BCLK setup for i915 HSW/BDW needs to be updated at each HDMI hotplug, not only at initialization and resume. That is, we need to update HSW_EM4 and HSW_EM5 registers at ELD notification, too. Otherwise the HDMI audio may be out of sync and played in a wrong pitch. However, the HDA codec driver has no access to the controller registers, and currently the code managing these registers is in hda_intel.c, i.e. local to the controller driver. For allowing the explicit BCLK update from the codec driver, as in this patch, the former haswell_set_bclk() in hda_intel.c is moved to hdac_i915.c and exposed as snd_hdac_i915_set_bclk(). This is called from both the HDA controller driver and intel_pin_eld_notify() in HDMI codec driver. Along with this change, snd_hdac_get_display_clk() gets dropped as it's no longer used. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91410 Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
-
Conrad Kostecki authored
Fixes audio output on a ThinkPad X260, when using Lenovo CES 2013 docking station series (basic, pro, ultra). Signed-off-by:
Conrad Kostecki <ck+linuxkernel@bl4ckb0x.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
au88x0 hardware seems returning the current pointer at the buffer boundary instead of going back to zero. This results in spewing warnings from PCM core. This patch corrects the return value from the pointer callback within the proper value range, just returning zero if the position is equal or above the buffer size. Signed-off-by: -
Takashi Iwai authored
This patch tries to address the still remaining issues in ALSA hrtimer driver: - Spurious use-after-free was detected in hrtimer callback - Incorrect rescheduling due to delayed start - WARN_ON() is triggered in hrtimer_forward() invoked in hrtimer callback The first issue happens only when the new timer is scheduled even while hrtimer is being closed. It's related with the second and third items; since ALSA timer core invokes hw.start callback during hrtimer interrupt, this may result in the explicit call of hrtimer_start(). Also, the similar problem is seen for the stop; ALSA timer core invokes hw.stop callback even in the hrtimer handler, too. Since we must not call the synced hrtimer_cancel() in such a context, it's just a hrtimer_try_to_cancel() call that doesn't properly work. Another culprit of the second and third items is the call of hrtimer_forward_now() before snd_timer_interrupt(). The timer->stick value may change during snd_timer_interrupt() call, but this possibility is ignored completely. For covering these subtle and messy issues, the following changes have been done in this patch: - A new flag, in_callback, is introduced in the private data to indicate that the hrtimer handler is being processed. - Both start and stop callbacks skip when called from (during) in_callback flag. - The hrtimer handler returns properly HRTIMER_RESTART and NORESTART depending on the running state now. - The hrtimer handler reprograms the expiry properly after snd_timer_interrupt() call, instead of before. - The close callback clears running flag and sets in_callback flag to block any further start/stop calls. Signed-off-by:
-
- 25 Apr, 2016 3 commits
-
-
Eric Engestrom authored
Signed-off-by:
Eric Engestrom <eric@engestrom.ch> Acked-by:
-
Alexandre Belloni authored
There are no users of rtctimer left. Remove its code as this is the in-kernel user of the legacy PC RTC driver that will hopefully be removed at some point. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Takashi Sakamoto authored
When some tascam units are connected sequentially, userspace applications are involved at bus-reset state on IEEE 1394 bus. In the state, any communications can be canceled. Therefore, sound card registration should be delayed till the bus gets calm. This commit achieves it. Signed-off-by:
-
- 21 Apr, 2016 2 commits
-
-
Takashi Iwai authored
HD-audio driver uses regmap cache bypass feature for reading a raw value without the cache. But this is racy since both the cached and the uncached reads may occur concurrently. The former is done via the normal control API access while the latter comes from the proc file read. Even though the regmap itself has the protection against the concurrent accesses, the flag set/reset is done without the protection, so it may lead to inconsistent state of bypass flag that doesn't match with the current read and occasionally result in a kernel WARNING like: WARNING: CPU: 3 PID: 2731 at drivers/base/regmap/regcache.c:499 regcache_cache_only+0x78/0x93 One way to work around such a problem is to wrap with a mutex. But in this case, the solution is simpler: for the uncached read, we just skip the regmap and directly calls its accessor. The verb execution there is protected by itself, so basically it's safe to call individually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171Signed-off-by:
-
Takashi Iwai authored
The commit [9bef72bd: ALSA: pcxhr: Use nonatomic PCM ops] converted to non-atomic PCM ops, but shamelessly with an unbalanced mutex locking, which leads to the hangup easily. Fix it. Fixes: 9bef72bd ('ALSA: pcxhr: Use nonatomic PCM ops') Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116441 Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by:
-
- 20 Apr, 2016 1 commit
-
-
Lu, Han authored
Add HD Audio Device PCI ID for the Intel Broxton-T platform. It is an HDA Intel PCH controller. Signed-off-by:
Lu, Han <han.lu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 19 Apr, 2016 2 commits
-
-
Takashi Iwai authored
Although one weird behavior about the input path (inconsistent D0/D3 switch) on Cirrus CS420x codecs was fixed in the previous commit, there is still an issue on some Mac machines: the capture stream stalls when switching the ADCs on the fly. More badly, this keeps stuck until the next reboot. The dynamic ADC switching is already a bit fragile and assuming optimistically that the chip accepts the frequent power changes. On Cirrus codecs, this doesn't seem applicable. As a quick workaround, we pin down the ADCs to keep up in D0 when spec->dyn_adc_switch is set. In this way, the ADCs are kept up only for the system that were confirmed to be broken. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
Takashi Iwai authored
The "Line In->Rear Out Switch" control on ens1371 driver returns a bogus value, always true, as its check is totally broken. Fix it to check the proper GPIO bit mask. Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
- 18 Apr, 2016 2 commits
-
-
Bastien Nocera authored
The Optiplex 9020m with Haswell-DT processor needs a quirk for the headset jack at the front of the machine to be able to use microphones. A quirk for this model was originally added in 31278997, but c77900e6 removed it in favour of a more generic version. Unfortunately, pin configurations can changed based on firmware/BIOS versions, and the generic version doesn't have any effect on newer versions of the machine/firmware anymore. With help from David Henningsson <diwic@ubuntu.com> Signed-off-by:
Bastien Nocera <hadess@hadess.net> Tested-by:
-
Libin Yang authored
Make sure per_pin is not NULL before using it. Fixes: 9b3dc8aa ('ALSA: hda - Register chmap obj as priv data instead of codec') Signed-off-by:
Libin Yang <libin.yang@linux.intel.com> Signed-off-by:
-
- 17 Apr, 2016 1 commit
-
-
Takashi Iwai authored
We've got a regression report that the recording on Mac with a cirrus codec doesn't work any longer. This turned out to be the missing power up to D0 by power_save_node enablement. After analyzing the traces, we found out that the culprit is that the codec advertises the "actual" power state of a few nodes to be D0 while the "target" power state is D3. This inconsistency is usually OK, as it implies the power transition. But in the case of cirrus codec, this seems to be stuck to D3 while it's not actually D0. This patch addresses the issue by checking the power state difference more strictly. It sends the power-state change verb unless both the target and the actual power states show the given value. We may introduce yet another flag indicating the possible broken hardware power state, but it's anyway safer to set the proper power state even in a transition (at least it's harmless as long as the target state is same). So this simpler change was applied now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171 Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
-
- 15 Apr, 2016 1 commit
-
-
Takashi Iwai authored
lx_pipe_state() checks the return value from lx_message_send_atomic() and breaks the loop only when it's a negative value. However, lx_message_send_atomic() may return a positive error code (as the return code from the hardware), and then lx_pipe_state() tries to compare the uninitialized current_state variable. Fix this behavior by checking the positive non-zero error code as well. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 14 Apr, 2016 1 commit
-
-
Takashi Iwai authored
Currently kill_fasync() is called outside the stream lock in snd_pcm_period_elapsed(). This is potentially racy, since the stream may get released even during the irq handler is running. Although snd_pcm_release_substream() calls snd_pcm_drop(), this doesn't guarantee that the irq handler finishes, thus the kill_fasync() call outside the stream spin lock may be invoked after the substream is detached, as recently reported by KASAN. As a quick workaround, move kill_fasync() call inside the stream lock. The fasync is rarely used interface, so this shouldn't have a big impact from the performance POV. Ideally, we should implement some sync mechanism for the proper finish of stream and irq handler. But this oneliner should suffice for most cases, so far. Reported-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
-
- 13 Apr, 2016 2 commits
-
-
Takashi Iwai authored
While the previous commit fixed the missing monitor_present flag update, it may be still in an inconsistent state while the driver repolls: the flag itself is updated, but the eld_valid flag and the contents don't follow until the repoll finishes (and may be repeated for a few times). The basic problem is that pin_eld->monitor_present is updated in the caller side. This should have been updated only in update_eld(). So, the proper fix is to avoid accessing pin_eld but only spec->temp_eld. Signed-off-by: -
Hyungwon Hwang authored
The commit [bd481285: ALSA: hda - Fix forgotten HDMI monitor_present update] covered the missing update of monitor_present flag, but this caused a regression for devices without the i915 eld notifier. Since the old code supposed that pin_eld->monitor_present was updated by the caller side, the hdmi_present_sense_via_verbs() doesn't update the temporary eld->monitor_present but only pin_eld->monitor_present, which is now overridden in update_eld(). The fix is to update pin_eld->monitor_present as well before calling update_eld(). Note that this may still leave monitor_present flag in an inconsistent state when the driver repolls, but this is at least the old behavior. More proper fix will follow in the later patch. Fixes: bd481285 ('ALSA: hda - Fix forgotten HDMI monitor_present update') Signed-off-by:
Hyungwon Hwang <hyungwon.hwang7@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 12 Apr, 2016 3 commits
-
-
Takashi Iwai authored
Update the URLs for alsa-info.sh and hda-emu. Also drop the alsa-driver snapshot URL since it's been discontinued recently. Signed-off-by: -
Takashi Iwai authored
The calls for capture_hook were missing in dyn_adc_capture_pcm_prepare and cleanup callbacks. Luckily there are no users of the capture hooks with dyn-adc PCM, so far, thus this doesn't change the behavior of existing devices, but it's a fix for a future usage. Signed-off-by: -
Kailang Yang authored
This is Dell usb dock audio workaround. It was fixed the master volume keep lower. [Some background: the patch essentially skips the controls of a couple of FU volumes. Although the firmware exposes the dB and the value information via the usb descriptor, changing the values (we set the min volume as default) screws up the device. Although this has been fixed in the newer firmware, the devices are shipped with the old firmware, thus we need the workaround in the driver side. -- tiwai] Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 11 Apr, 2016 2 commits
-
-
Sven Eckelmann authored
The Lenovo Thinkpad T460s requires the alc_fixup_tpt440_dock as well in order to get working sound output on the docking stations headphone jack. Patch tested on a Thinkpad T460s (20F9CT01WW) using a ThinkPad Ultradock on kernel 4.4.6. Signed-off-by:
Sven Eckelmann <sven@narfation.org> Tested-by:
Simon Wunderlich <sw@simonwunderlich.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
William Breathitt Gray authored
The 'size' member of a struct firmware is passed to snd_printk with a respective format string using the %d identifier. The 'size' member is of type size_t, but format identifier %d indicates a signed int data type. This patch replaces the %d format identifier with the correct %zu format identifier for size_t data types. Signed-off-by:
William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by:
-
- 09 Apr, 2016 3 commits
-
-
Daniel Mack authored
miniDSP USBStreamer UAC2 devices send clock validity changes with the control field set to zero. The current interrupt handler ignores all packets if the control field does not match the mixer element's, but it really should only do that in case that field is needed to distinguish multiple elements with the same ID. This patch implements a logic that lets notifications packets pass if the element ID is unique for a given device. Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Daniel Mack authored
UAC2 specifies clock sources that optionally have validity controls. This patch exposes them as mixer controls, so they can be read (and at least in theory even be written) by userspace applications in order to make clock selection policy decisions. This implementation does nothing if the device is not UAC2 compliant, or if the clock source does not define said validity control bits. Tested with a miniDSP USBStreamer (0x2752/0x0016). Signed-off-by:
-
Julia Lawall authored
The ct_timer_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 08 Apr, 2016 1 commit
-
-
Masanari Iida authored
This patch fix a spelling typo found in Documentation/sound/alsa/timestamping.txt Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
- 06 Apr, 2016 2 commits
-
-
Dennis Kadioglu authored
Plantronics BT300 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1". This patch adds the USB ID of the BT300 to quirks.c and avoids those error messages. Signed-off-by:
Dennis Kadioglu <denk@post.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
intel8x0 driver has the inside_vm check for skipping a buggy hardware workaround in the PCM pointer callback in the commit [228cf793: ALSA: intel8x0: Improve performance in virtual environment]. This was originally applied to all devices on known VMs, but the code was switched to use the PCI ID matching for applying to only known devices (KVM and Parallels), in order to avoid applying wrongly to VT-d and other such cases, in the commit [7fb4f392: ALSA: intel8x0: improve virtual environment detection]. Meanwhile, the original VM check was kept even after switching to the PCI ID matching. It was partly because we weren't 100% sure whether we had covered all well, and partly because this would help identifying the issue once when a user of another VM hit the same problem or a regression. Currently the VM check is used only for showing the kernel message that the VM-optimization isn't applied, and the VM check itself doesn't change the actual driver behavior at all. Despite the relatively safe driver behavior, the code caught attention of developers badly and brought many confusion / misunderstanding. Since we've got neither regression nor enhancement report for other VMs for five years long, it's likely safe to drop this superfluous VM check now. The module option is still kept, so if a user still needs to adjust, it can be applied as was. Acked-by:
Konstantin Ozerkov <kozerkov@parallels.com> Signed-off-by:
-
- 04 Apr, 2016 4 commits
-
-
Subhransu S. Prusty authored
The existing TLV callback implementation copies all of the cea_channel_speaker_allocation map table to the TLV container irrespective of what is reported by sink. This is of little use to the userspace application. With this patch, it parses the spk_alloc block as queried from the ELD, and copies only the corresponding mapping channel allocation entries from the cea channel speaker allocation table. Thus the user can parse the TLV container to identify sink's capability and set the channel map accordingly. It shouldn't impact the behavior in AMD chipset, as this makes use of already parsed spk alloc block to calculate the channel map. Signed-off-by:
Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by:
-
Takashi Iwai authored
Conflicts: sound/hda/hdac_i915.c Signed-off-by: -
Takashi Iwai authored
Phoenix Audio TMX320 gives the similar error when the sample rate is asked: usb 2-1.3: 2:1: cannot get freq at ep 0x85 usb 2-1.3: 1:1: cannot get freq at ep 0x2 .... Add the corresponding USB-device ID (1de7:0014) to snd_usb_get_sample_rate_quirk() list. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110221 Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
On Skylake and onwards, the HD-audio controller driver needs to bind with i915 for having the control of power well audio domain before actually probing the codec. This leads to the load of i915 driver from the audio driver side. But, there are systems that have no Intel graphics but Nvidia or AMD GPU, although they still use HD-audio bus for the onboard audio codecs. On these, loading the i915 driver is nothing but a useless memory and CPU consumption. A simple way to avoid it is just to look for the Intel graphics PCI entry beforehand, and try to bind with i915 only when such an entry is found. Currently, it assumes the PCI display class. If another class appears, this needs to be extended (although it's very unlikely). Signed-off-by:
-
- 03 Apr, 2016 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc kernel side fixes: - fix event leak - fix AMD PMU driver bug - fix core event handling bug - fix build bug on certain randconfigs Plus misc tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix pmu::stop() nesting perf/core: Don't leak event in the syscall error path perf/core: Fix time tracking bug with multiplexing perf jit: genelf makes assumptions about endian perf hists: Fix determination of a callchain node's childlessness perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples perf tools: Fix build break on powerpc perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers perf tests: Fix tarpkg build test error output redirection
-
