- 04 Sep, 2020 13 commits
-
-
Pierre-Louis Bossart authored
Now that the stream is handled at the dai-link level (in the machine driver), we can remove the stream handling at the dai level. We still need these callbacks to perform dai-level resource handling (i.e. addition/removal of a master). Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200903204739.31206-5-yung-chuan.liao@linux.intel.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Pierre-Louis Bossart authored
Now that the stream trigger is handled at the dai-link level, there is no need for a dai-level trigger any longer. Signed-off-by:
-
Pierre-Louis Bossart authored
snd_soc_dai_get_sdw_stream() can only return the pointer to stream or an ERR_PTR value, NULL is not a possible value. Fixes: 09553140 ('soundwire: intel: implement get_sdw_stream() operations') Reported-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
snd_soc_dai_get_sdw_stream() can only return -ENOTSUPP or the stream, NULL is not a possible value. Fixes: 4550569b ('soundwire: stream: add helper to startup/shutdown streams') Reported-by:
-
Vinod Koul authored
soundwire had defined SDW_REG_SHIFT to calculate shift values for bitmasks, but now that we have better things in bitfield.h, remove this. Signed-off-by:
-
Vinod Koul authored
use FIELD_{GET|PREP} in intel_init driver to get/set field values instead of open coding masks and shift operations. Signed-off-by: -
Vinod Koul authored
use FIELD_{GET|PREP} in intel driver to get/set field values instead of open coding masks and shift operations. Signed-off-by: -
Vinod Koul authored
use FIELD_{GET|PREP} in cadence driver to get/set field values instead of open coding masks and shift operations. Signed-off-by: -
Vinod Koul authored
use FIELD_{GET|PREP} in qcom driver to get/set field values instead of open coding masks and shift operations. Also, remove now unused register shift defines Signed-off-by: -
Vinod Koul authored
use FIELD_{GET|PREP} in stream code to get/set field values instead of open coding masks and shift operations. Signed-off-by: -
Vinod Koul authored
use SDW_DISCO_LINK_ID() in slave code to extract field values instead of open coding masks and shift operations to extract link_id Signed-off-by:
-
Vinod Koul authored
use FIELD_GET() in bus code to extract field values instead of open coding masks and shift operations. Signed-off-by:
-
Vinod Koul authored
Soundwire addr is a 52bit value encoding link, version, unique id, mfg id, part id and class id. Define bit masks for these and use FIELD_GET() to extract these fields. Signed-off-by:
-
- 03 Sep, 2020 13 commits
-
-
Pierre-Louis Bossart authored
Each link has separate power controls, but experimental results show we need to use an all-or-none approach to the link power management. This change has marginal power impacts, the DSP needs to be powered anyways before SoundWire links can be powered, and even when powered a link can be in clock-stopped mode. Signed-off-by:
-
Pierre-Louis Bossart authored
While the hardware exposes independent bits to power-up each master, the recommended sequence is to power all links or none. Idle links can still use the clock stop mode while the master is powered. Signed-off-by:
-
Pierre-Louis Bossart authored
Detect cases where the clock is assumed to be stopped but the IP is not in the relevant state. There is no real way to recover here, but adding an error log can help detect bad programming sequences or race conditions. Signed-off-by:
-
Pierre-Louis Bossart authored
Use platform-specific information to decide when to use hw_sync, not only a number of links > 1. Signed-off-by:
-
Pierre-Louis Bossart authored
set the flags as required by hardware implementation Signed-off-by:
-
Pierre-Louis Bossart authored
Hardware-based synchronization is typically required when the bus->multi_link flag is set. On Intel platforms, when the Cadence IP is configured in 'Multi Master Mode', the hardware synchronization is required even when a stream only uses a single segment. The existing code only deal with hardware synchronization when a stream uses more than one segment so to remain backwards compatible we add a configuration threshold. For Intel cases this threshold will be set to one, other platforms may be able to use the SSP-based sync in those cases. Signed-off-by:
-
Pierre-Louis Bossart authored
Deal with the BUS_RESET case, which is the default. The only change is to add support for the exit sequence using the syncArm/syncGo mode for the exit reset sequence. Signed-off-by:
-
Pierre-Louis Bossart authored
The multi-link support is enabled with a hardware gsync signal connecting all links. All commands and operations which typically are handled on an SSP boundary will be deferred further and enabled across all links with the 'syncGo' sequence. Signed-off-by:
-
Pierre-Louis Bossart authored
with multiple links synchronized in hardware, retrying commands in software is not recommended. Signed-off-by:
-
Pierre-Louis Bossart authored
If we enabled the clock stop mode and suspend, we need to disable the shim wake. We do so only if the parent is pm_runtime active due to power rail dependencies. GitHub issue: https://github.com/thesofproject/linux/issues/1678Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code allocates memory for the total number of ports. This only works if the ports are contiguous, but will break if e.g. a Devices uses port0, 1, and 14. The port_ready[] array would contain 3 elements, which would lead to an out-of-bounds access. Conversely in other cases, the wrong port index would be used leading to timeouts on prepare. This can be fixed by allocating for the worst-case of 15 ports (DP0..DP14). In addition since the number is now fixed, we can use an array instead of a dynamic allocation. Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200831134318.11443-4-yung-chuan.liao@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
A Device may have at most 15 physical ports (DP0, DP1..DP14). Signed-off-by:
-
Pierre-Louis Bossart authored
port_ready will be changed to a fixed array in sdw.h and all initialization work will be done at soundwire side in the following patch. So remove them from codec drivers. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200831134318.11443-2-yung-chuan.liao@linux.intel.comSigned-off-by:
-
- 26 Aug, 2020 1 commit
-
-
Bard Liao authored
When CONFIG_PM_SLEEP is not defined, GCC throws compilation warnings: drivers/soundwire/intel.c:1799:12: warning: ‘intel_resume’ defined but not used [-Wunused-function] static int intel_resume(struct device *dev) ^~~~~~~~~~~~ drivers/soundwire/intel.c:1683:12: warning: ‘intel_suspend’ defined but not used [-Wunused-function] static int intel_suspend(struct device *dev) ^~~~~~~~~~~~~ Fix by using __maybe_unused macro. Suggested-by:
-
- 18 Aug, 2020 12 commits
-
-
Rander Wang authored
When all the links are suspended, the HDaudio controller may suspend and the power rails to the SoundWire IP may be disabled, requiring a complete re-initialization/enumeration on resume. However, if one or more Masters remained active, the HDaudio controller will remain active and the power rails will remain enabled. As a result, during the link resume step we can check if the context was preserved by verifying if the clock was stopped, and avoid doing a complete bus reset and re-enumeration. Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
In this mode, on restart the bus restarts immediately, the Slaves remain synchronized and all context is kept intact. Signed-off-by:
-
Pierre-Louis Bossart authored
When none of the clock stop quirks is specified, the Master IP will assume the context is preserved and will not reset the Bus and restart enumeration. Due to power rail dependencies, the HDaudio controller needs to remain powered and prevented from executing its pm_runtime suspend routine. This choice of course has a power impact, and this mode should only be selected when latency requirements are critical or the parent device can enter D0ix modes. Signed-off-by:
-
Pierre-Louis Bossart authored
In case the clock needs to keep running, we need to prevent the Master from entering pm_runtime suspend. Signed-off-by:
-
Rander Wang authored
Move existing pm_runtime suspend under the CLK_STOP_TEARDOWN case. In this mode the Master IP will lose all context but in-band wakes are supported. On pm_runtime resume a complete re-enumeration will be performed after a bus reset. Signed-off-by:
-
Pierre-Louis Bossart authored
Now that we have options, add support for TEARDOWN mode (same functionality as existing code) All other modes will be added in follow-up patches. Signed-off-by:
-
Pierre-Louis Bossart authored
Add quirk and pm_runtime idle scheduling to let the Master suspend if no Slaves become attached. This can happen when a link is not marked as disabled and has devices exposed in the DSDT, if the power is controlled by sideband means or the link includes a pluggable connector. Signed-off-by:
-
Bard Liao authored
The .prepare() callback is invoked for normal streaming, underflows or during the system resume transition. In the latter case, the context for the ALH PDIs is lost, and the DSP is not initialized properly either, but the bus parameters don't need to be recomputed. Conversely, when doing a regular .prepare() during an underflow, the ALH/SHIM registers shall not be changed as the hardware cannot be reprogrammed after the DMA started (hardware spec requirement). This patch adds storage of PDI and hw_params in the DAI dma context, and the difference between the types of .prepare() usages is handled via a simple boolean, updated when suspending, and tested for in the .prepare() case. Signed-off-by:
-
Pierre-Louis Bossart authored
This helps make sure they are all UNATTACHED and reset the state machines. At the moment we perform a bus reset both for system resume and pm_runtime resume, this will be modified when clock-stop mode is supported Signed-off-by:
-
Pierre-Louis Bossart authored
Previous patches took care of the case where the master device is pm_runtime 'suspended' when a system suspend occurs. In the case where the master device was not suspended, e.g. if suspend occurred while streaming audio, Intel validation noticed a race condition: the pm_runtime suspend may conflict with the enumeration started by the system resume. This can be simply fixed by updating the status before exiting system resume. GitHub issue: https://github.com/thesofproject/linux/issues/1482Signed-off-by:
-
Pierre-Louis Bossart authored
The system resume does the entire bus re-initialization and brings it to full-power. If the device was pm_runtime suspended, there is no need to run the pm_runtime resume sequence after the system runtime. Follow the documentation from runtime_pm.rst, and conditionally disable, set_active and re-enable the device on system resume. Note that pm_runtime_suspended() is used instead of pm_runtime_status_suspended() so that we can deal with the case where pm_runtime is disabled. Signed-off-by:
-
Pierre-Louis Bossart authored
Add basic hooks in DAI .startup and .shutdown callbacks. The SoundWire IP should be powered between those two calls. The power dependencies between SoundWire and DSP are handled with the parent/child relationship, before the SoundWire master device becomes active the parent device will become active and power-up the shared rails. For now the strategy is to rely on complete enumeration when the device becomes active, so the code is a copy/paste of the sequence for system suspend/resume. In future patches, the strategy will optionally be to rely on clock stop if the enumeration time is prohibitive or when the devices connected to a link can signal a wake. A module parameter is added to make integration of new Slave devices easier, to e.g. keep the device active or prevent clock-stop. Note that we need to we have to disable runtime pm before device unregister, otherwise we will see "Failed to power up link: -11" error on module remove test. Signed-off-by:
-
- 17 Aug, 2020 1 commit
-
-
Pierre-Louis Bossart authored
Implement suspend/resume capabilities (not runtime_pm for now) The resume part is essentially a full-blown re-enumeration. When S0ix is supported, we will select clock stop mode when the ACPI target state is S0, and tear down the link for S3. Signed-off-by:
-
