- 23 Jan, 2012 14 commits
-
-
Hugh Dickins authored
Commit cc39c6a9 ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages evictable again once the shared memory is unlocked. It does this with pagevec_lookup()s across the whole object (which might occupy most of memory), and takes 300ms to unlock 7GB here. A cond_resched() every PAGEVEC_SIZE pages would be good. However, KOSAKI-san points out that this is called under shmem.c's info->lock, and it's also under shm.c's shm_lock(), both spinlocks. There is no strong reason for that: we need to take these pages off the unevictable list soonish, but those locks are not required for it. So move the call to scan_mapping_unevictable_pages() from shmem.c's unlock handling up to shm.c's unlock handling. Remove the recently added barrier, not needed now we have spin_unlock() before the scan. Use get_file(), with subsequent fput(), to make sure we have a reference to mapping throughout scan_mapping_unevictable_pages(): that's something that was previously guaranteed by the shm_lock(). Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK time, and we lazily discover them to be Unevictable later, so it serves no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since pages still on pagevec are not marked Unevictable. The original code avoided redundant rescans by checking VM_LOCKED flag at its level: now avoid them by checking shp's SHM_LOCKED. The original code called scan_mapping_unevictable_pages() on a locked area at shm_destroy() time: perhaps we once had accounting cross-checks which required that, but not now, so skip the overhead and just let inode eviction deal with them. Put check_move_unevictable_page() and scan_mapping_unevictable_pages() under CONFIG_SHMEM (with stub for the TINY case when ramfs is used), more as comment than to save space; comment them used for SHM_UNLOCK. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Holzheu authored
kdump only allocates memory for the prstatus ELF note. For s390x, besides of prstatus multiple ELF notes for various different register types are stored. Therefore the currently allocated memory is not sufficient. With this patch the KEXEC_NOTE_BYTES macro can be defined by architecture code and for s390x it is set to the correct size now. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hillf Danton authored
Page mapcount should be updated only if we are sure that the page ends up in the page table otherwise we would leak if we couldn't COW due to reservations or if idx is out of bounds. Signed-off-by: Hillf Danton <dhillf@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
end_migration() passes the old page instead of the new page to commit the charge. This page descriptor is not used for committing itself, though, since we also pass the (correct) page_cgroup descriptor. But it's used to find the soft limit tree through the page's zone, so the soft limit tree of the old page's zone is updated instead of that of the new page's, which might get slightly out of date until the next charge reaches the ratelimit point. This glitch has been present since 5564e88b ("memcg: condense page_cgroup-to-page lookup points"). This fixes a bug that I introduced in 2.6.38. It's benign enough (to my knowledge) that we probably don't want this for stable. Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Will Deacon authored
/proc/pid/clear_refs is used to clear the Referenced and YOUNG bits for pages and corresponding page table entries of the task with PID pid, which includes any special mappings inserted into the page tables in order to provide things like vDSOs and user helper functions. On ARM this causes a problem because the vectors page is mapped as a global mapping and since ec706dab ("ARM: add a vma entry for the user accessible vector page"), a VMA is also inserted into each task for this page to aid unwinding through signals and syscall restarts. Since the vectors page is required for handling faults, clearing the YOUNG bit (and subsequently writing a faulting pte) means that we lose the vectors page *globally* and cannot fault it back in. This results in a system deadlock on the next exception. To see this problem in action, just run: $ echo 1 > /proc/self/clear_refs on an ARM platform (as any user) and watch your system hang. I think this has been the case since 2.6.37 This patch avoids clearing the aforementioned bits for reserved pages, therefore leaving the vectors page intact on ARM. Since reserved pages are not candidates for swap, this change should not have any impact on the usefulness of clear_refs. Signed-off-by: Will Deacon <will.deacon@arm.com> Reported-by: Moussa Ba <moussaba@micron.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Matt Mackall <mpm@selenic.com> Cc: <stable@vger.kernel.org> [2.6.37+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Axel Lin authored
drivers/video/backlight/l4f00242t03.c: return proper error in l4f00242t03_probe if regulator_get() fails Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alberto Panizzo <alberto@amarulasolutions.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Axel Lin authored
We need to write new value if the bit mask fields of new value is not equal to old value. It does not make sense to write new value only when all the bit_mask bits are zero. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ananth N Mavinakayanahalli authored
Commit ef53d9c5 ("kprobes: improve kretprobe scalability with hashed locking") introduced a bug where we can potentially leak kretprobe_instances since we initialize a hlist head after having used it. Initialize the hlist head before using it. Reported by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srinivasa D S <srinivasa@in.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
Because the current task is being used to get the limit, we can simply use rlimit() instead of task_rlimit(). Signed-off-by: Davidlohr Bueso <dave@gnu.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sebastian Andrzej Siewior authored
Add support for leds on Bachmann's ot200 visualisation device. The device has three leds on the back panel (led_err, led_init and led_run) and can handle up to seven leds on the front panel. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. It incorporates feedback from Lars-Peter Clausen [akpm@linux-foundation.org: add dependency on HAS_IOMEM] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
page_zone() requires an online node otherwise we are accessing NULL NODE_DATA. This is not an issue at the moment because node_zones are located at the structure beginning but this might change in the future so better be careful about that. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Hocko authored
Fix the following NULL ptr dereference caused by cat /sys/devices/system/memory/memory0/removable Pid: 13979, comm: sed Not tainted 3.0.13-0.5-default #1 IBM BladeCenter LS21 -[7971PAM]-/Server Blade RIP: __count_immobile_pages+0x4/0x100 Process sed (pid: 13979, threadinfo ffff880221c36000, task ffff88022e788480) Call Trace: is_pageblock_removable_nolock+0x34/0x40 is_mem_section_removable+0x74/0xf0 show_mem_removable+0x41/0x70 sysfs_read_file+0xfe/0x1c0 vfs_read+0xc7/0x130 sys_read+0x53/0xa0 system_call_fastpath+0x16/0x1b We are crashing because we are trying to dereference NULL zone which came from pfn=0 (struct page ffffea0000000000). According to the boot log this page is marked reserved: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) and early_node_map confirms that: early_node_map[3] active PFN ranges 1: 0x00000010 -> 0x0000009c 1: 0x00000100 -> 0x000bffa3 1: 0x00100000 -> 0x00240000 The problem is that memory_present works in PAGE_SECTION_MASK aligned blocks so the reserved range sneaks into the the section as well. This also means that free_area_init_node will not take care of those reserved pages and they stay uninitialized. When we try to read the removable status we walk through all available sections and hope that the zone is valid for all pages in the section. But this is not true in this case as the zone and nid are not initialized. We have only one node in this particular case and it is marked as node=1 (rather than 0) and that made the problem visible because page_to_nid will return 0 and there are no zones on the node. Let's check that the zone is valid and that the given pfn falls into its boundaries and mark the section not removable. This might cause some false positives, probably, but we do not have any sane way to find out whether the page is reserved by the platform or it is just not used for whatever other reasons. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
sparc64 allmodconfig: In file included from include/linux/compat.h:15, from /usr/src/25/arch/sparc/include/asm/siginfo.h:19, from include/linux/signal.h:5, from include/linux/sched.h:73, from arch/sparc/kernel/asm-offsets.c:13: include/linux/fs.h:618: warning: parameter has incomplete type It seems that my sparc64 compiler (gcc-3.4.5) doesn't like the forward declaration of enums. Fix this by moving the "enum migrate_mode" definition into its own header file. Acked-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Jan, 2012 16 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
gpio bug fixes for v3.3 * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: Use correct offset for gpio initialization gpio/it8761e: Restrict it8761e gpio driver to x86. gpio-ml-ioh: cleanup __iomem annotation usage gpio-ml-ioh: cleanup NULL pointer checking gpio-pch: cleanup __iomem annotation usage gpio-pch: cleanup NULL pointer checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... vfs: remove printk from set_nlink() wake up s_wait_unfrozen when ->freeze_fs fails
-
H. Peter Anvin authored
In checkin 303395ac x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
-
H. Peter Anvin authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning MPILIB: Add a missing ENOMEM check
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname is not going to be NULL, TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Permit key_serial() to be called with a const key pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Mimi Zohar authored
Replace the rcu_assign_pointer() calls with rcu_assign_keypointer(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Mimi Zohar authored
Fix ima_policy.c sparse "warning: dereference of noderef expression" message, by accessing cred->uid using current_cred(). Changelog v1: - Change __cred to just cred (based on David Howell's comment) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
-
Linus Torvalds authored
Randy Dunlap reports that we get arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value' arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here when compiling UML for x86-64. Stephen Rothwell root-caused it and says: "Caused by commit d7e7528b ("Audit: push audit success and retcode into arch ptrace.h") (another patch that was never in linux-next :-(). This file now needs protection against double inclusion." so let's do as the man says. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Add a missing ENOMEM check. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: ib_srpt: Initial SRP Target merge for v3.3-rc1
-
- 18 Jan, 2012 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Set additional sense length field in sense data target: Remove legacy device status check from transport_execute_tasks target: Remove __transport_execute_tasks() for each processing context target: Remove extra se_device->execute_task_lock access in fast path target: Drop se_device TCQ queue_depth usage from I/O path target: Fix possible NULL pointer with __transport_execute_tasks target: Remove TFO->check_release_cmd() fabric API caller tcm_fc: Convert ft_send_work to use target_submit_cmd target: Add target_submit_cmd() for process context fabric submission target: Make target_put_sess_cmd use target_release_cmd_kref target: Set response format in INQUIRY response target: tcm_mod_builder: small fixups Documentation/target: Fix tcm_mod_builder.py build breakage target: remove overagressive ____cacheline_aligned annoations tcm_loop: bump max_sectors target/configs: remove trailing newline from udev_path and alias iscsi-target: fix chap identifier simple_strtoul usage target: remove useless casts target: simplify target_check_cdb_and_preempt target: Move core_scsi3_check_cdb_abort_and_preempt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
This includes initial support for the recently published ACPI 5.0 spec. In particular, support for the "hardware-reduced" bit that eliminates the dependency on legacy hardware. APEI has patches resulting from testing on real hardware. Plus other random fixes. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits) acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 ACPI processor: Remove unneeded cpuidle_unregister_driver call intel idle: Make idle driver more robust intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle ACPI: kernel-parameters.txt : Add intel_idle.max_cstate intel_idle: remove redundant local_irq_disable() call ACPI processor: Fix error path, also remove sysdev link ACPI: processor: fix acpi_get_cpuid for UP processor intel_idle: fix API misuse ACPI APEI: Convert atomicio routines ACPI: Export interfaces for ioremapping/iounmapping ACPI registers ACPI: Fix possible alignment issues with GAS 'address' references ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64) ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64) ACPI: Store SRAT table revision ACPI, APEI, Resolve false conflict between ACPI NVS and APEI ACPI, Record ACPI NVS regions ACPI, APEI, EINJ, Refine the fix of resource conflict ...
-
Stefan Berger authored
This patch fixes an (ACPI S3) suspend regression introduced in commit 68d6e671 ("tpm: Introduce function to poll for result of self test") and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers active. The suspend problem occurred if the TPM was disabled and/or deactivated and therefore the TPM_PCRRead checking the result of the (asynchronous) self test returned an error code which then caused the tpm_tis driver to become inactive and this then seemed to have negatively influenced the suspend support by the tpm_infineon driver... Besides that the tpm_tis drive may stay active even if the TPM is disabled and/or deactivated. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The type of 'make_request_fn' changed in 5a7bbad2 ("block: remove support for bio remapping from ->make_request"), but the merge of the nvme driver didn't take that into account, and as a result the driver would compile with a warning: drivers/block/nvme.c: In function 'nvme_alloc_ns': drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default] include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)' It's benign, but the warning is annoying. Reported-by: Stephen Rothwell <sfr@canb.auug.org> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
Fix these warnings: drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default] drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default] And this build error: ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined! Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux: i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH i2c-eg20t: modified the setting of transfer rate. i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number i2c: OMAP: Add DT support for i2c controller I2C: OMAP: NACK without STP I2C: OMAP: correct SYSC register offset for OMAP4
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits) [media] as3645a: Fix compilation by including slab.h [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c [media] ds3000: using logical && instead of bitwise & [media] v4l2-ctrls: make control names consistent [media] DVB: dib0700, add support for Nova-TD LEDs [media] DVB: dib0700, add corrected Nova-TD frontend_attach [media] DVB: dib0700, separate stk7070pd initialization [media] DVB: dib0700, move Nova-TD Stick to a separate set [media] : add MODULE_FIRMWARE to dib0700 [media] DVB-CORE: remove superfluous DTV_CMDs [media] s5p-jpeg: adapt to recent videobuf2 changes [media] s5p-g2d: fixed a bug in controls setting function [media] s5p-mfc: Fix volatile controls setup [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test [media] s5p-fimc: Fix incorrect control ID assignment [media] dvb_frontend: Don't call get_frontend() if idle [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Wait for WM8993 FLL to stabilise ASoC: core - Free platform DAPM context at platform removal. ASoC: dapm - Fix check for codec context in dapm_power_widgets(). ASoC: sgtl5000: update author email address ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.
-
Laxman Dewangan authored
Using the correct gpio offset for setting the initial value of gpio when setting output direction. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
SCSI updates on 20120118 * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits) [SCSI] libfc: remove redundant timer init for fcp [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c [SCSI] libfc: Declare local functions static [SCSI] fcoe: fix regression on offload em matching function for initiator/target [SCSI] qla4xxx: Update driver version to 5.02.00-k12 [SCSI] qla4xxx: Cleanup modinfo display [SCSI] qla4xxx: Update license [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init [SCSI] qla4xxx: Added error logging for firmware abort [SCSI] qla4xxx: Disable generating pause frames in case of FW hung [SCSI] qla4xxx: Temperature monitoring for ISP82XX core. [SCSI] megaraid: fix sparse warnings [SCSI] sg: convert to kstrtoul_from_user() [SCSI] don't change sdev starvation list order without request dispatched [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state [SCSI] isci: fix start OOB [SCSI] isci: fix io failures while wide port links are coming up [SCSI] isci: allow more time for wide port targets [SCSI] isci: enable wide port targets [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode. ...
-