- 21 Jul, 2015 1 commit
-
-
Anshuman Khandual authored
This patch adds one helper function 'sigcontext_vmx_regs' which computes quad word aligned pointer for 'vmx_reserve' array element in sigcontext structure making the code more readable. Signed-off-by:
Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Reword comment and fix build for CONFIG_ALTIVEC=n] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 16 Jul, 2015 5 commits
-
-
Anshuman Khandual authored
Commit ce48b210 "powerpc: Add VSX context save/restore, ptrace and signal support" expanded the 'vmx_reserve' array element to contain 101 double words, but the comment block above was not updated. Also reorder the constants in the array size declaration to reflect the logic mentioned in the comment block above. This change helps in explaining how the HW registers are represented in the array. But no functional change. Signed-off-by:
-
Anshuman Khandual authored
Currently tm_orig_msr is getting used during process context switch only. Then there is ckpt_regs which saves the checkpointed userspace context The MSR slot contained in ckpt_regs structure can be used during process context switch instead of tm_orig_msr, thus allowing us to drop it from thread_struct structure. This patch does that change. Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Johannes Thumshirn authored
Destroy afu->contexts_idr on release of an afu, reclaiming the allocated memory. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Johannes Thumshirn authored
Destroy cxl_adapter_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: -
Vipin K Parashar authored
This patch adds support for OPAL EPOW (Environmental and Power Warnings) and DPO (Delayed Power Off) events for the PowerNV platform. These events are generated on FSP (Flexible Service Processor) based systems. EPOW events are generated due to various critical system conditions that require system shutdown. A few examples of these conditions are high ambient temperature or system running on UPS power with low UPS battery. DPO event is generated in response to admin initiated system shutdown request. Upon receipt of EPOW and DPO events the host kernel invokes orderly_poweroff() for performing graceful system shutdown. Signed-off-by:
Vipin K Parashar <vipin@linux.vnet.ibm.com> Acked-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by:
-
- 13 Jul, 2015 13 commits
-
-
Gavin Shan authored
When releasing PE for SRIOV VF, the PE is forced to be frozen wrongly. When the same PE is picked for another VF, it won't work anyhow. The patch fixes the issue by unfreezing, not freezing the VF PE when releasing it. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
The PELTV of PF PE should include VF PE, which is missed by current code, so that the VF PE is frozen automatically when freezing PF PE. The patch fixes the PELTV of PF PE to include VF PE. Signed-off-by:
-
Gavin Shan authored
On PHB3, PE might be reserved in advance to reflect the M64 segments consumed by the PE according to M64 BARs (exclude VF BARs) of the PCI devices included in the PE. The PE is picked based on M64 BARs instead of the bridge's M64 windows, which might include VF BARs. Otherwise, wrong PE could be picked. The patch calculates the used M64 segments and PE numbers according to the M64 BARs, excluding VF BARs, of PCI devices in one particular PE, instead of the bridge's M64 windows. Then the right PE number is picked. Signed-off-by:
-
Gavin Shan authored
The patch changes the type of last argument of pnv_ioda_setup_bus_PE() and phb::pick_m64_pe() to boolean. No functional change. Signed-off-by:
-
Gavin Shan authored
On PHB3, some PEs might be reserved in advance to reflect the M64 segments consumed by those PEs. We're reserving PEs based on the M64 window of root port, which might contain VF BAR. The PEs for VFs are allocated dynamically, not reserved based on the consumed M64 segments. So the M64 window of root port isn't reliable for the task. Instead, we go through M64 BARs (VF BARs excluded) of PCI devices under the specified root bus and reserve PEs accordingly, as the patch does. Signed-off-by:
-
Gavin Shan authored
The PE numbers are reserved according to root port's M64 window, which is aligned to M64 segment finely. So one PE shouldn't be reserved for multiple times. We will reserve PE numbers according to the M64 BARs of PCI device in subsequent patches, which aren't aligned to M64 segment size finely. It means one particular PE could be reserved for multiple times. The patch allows one PE to be reserved for multiple times and we print the warning message at debugging level. Signed-off-by:
-
Anton Blanchard authored
mtmsr() does the right thing on 32bit and 64bit, so use it everywhere. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Michael Ellerman authored
The encoding of the lengths in the ibm_architecture_vec array is "interesting" to say the least. It's non-obvious how the number of bytes we provide relates to the length value. In fact we already got it wrong once, see 11e9ed43 "Fix up ibm_architecture_vec definition". So add some macros to make it (hopefully) clearer. These at least have the property that the integer present in the code is equal to the number of bytes that follows it. Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com>
-
Benjamin Herrenschmidt authored
This patch adds the ability to the DMA direct ops to fallback to the IOMMU ops for coherent alloc/free if the coherent mask of the device isn't suitable for accessing the direct DMA space and the device also happens to have an active IOMMU table. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
Now that the table and the offset can co-exist, we no longer need to flip/flop, we can just establish both once at boot time. Signed-off-by:
-
Benjamin Herrenschmidt authored
To support "hybrid" DMA ops in a subsequent patch, we will need both a direct DMA offset and an iommu pointer. Those are currently exclusive (a union), so change them to be separate fields. While there, also type iommu_table_base properly and make exist only on CONFIG_PPC64 since it's not referenced on 32-bit at all. Signed-off-by:
-
Rasmus Villemoes authored
A precision of 16 (%.16llx) has the same effect as a field width of 16 along with passing the 0 flag (%016llx), but the latter is much more common in the kernel tree. Update cxl to use that. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
-
Rasmus Villemoes authored
C99 says that a precision given as simply '.' with no following digits or * should be interpreted as 0. The kernel's printf implementation, however, treats this case as if the precision was omitted. C99 also says that if both the precision and value are 0, no digits should be printed. Even if the kernel followed C99 to the letter, I don't think that would be particularly useful in these cases. For consistency with most other format strings in the file, use an explicit precision of 16 and add a 0x prefix. Signed-off-by:
-
- 12 Jul, 2015 11 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by:
Jörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename. -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27 -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
-
Al Viro authored
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by:J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By:
Andrey Jr. Melnikov <temnota.am@gmail.com> Tested-By:
-
Al Viro authored
Cc: stable@vger.kernel.org # all branches Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
-
- 11 Jul, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A small set of fixes for problems found by smatch in new drivers that we added this rc and a handful of driver fixes that came in during the merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Incorrect register offset used for lock_status clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A bunch of fixes for radeon, intel, omap and one amdkfd fix. Radeon fixes are all over, but it does fix some cursor corruption across suspend/resume. i915 should fix the second warn you were seeing, so let us know if not. omap is a bunch of small fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/amdkfd: validate pdd where it acquired first Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull selinux fixes from James Morris. * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix mprotect PROT_EXEC regression caused by mm change selinux: don't waste ebitmap space when importing NetLabel categories
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This is an assortment of fixes. Most of the commits are from Filipe (fsync, the inode allocation cache and a few others). Mark kicked in a series fixing corners in the extent sharing ioctls, and everyone else fixed up on assorted other problems" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix wrong check for btrfs_force_chunk_alloc() Btrfs: fix warning of bytes_may_use Btrfs: fix hang when failing to submit bio of directIO Btrfs: fix a comment in inode.c:evict_inode_truncate_pages() Btrfs: fix memory corruption on failure to submit bio for direct IO btrfs: don't update mtime/ctime on deduped inodes btrfs: allow dedupe of same inode btrfs: fix deadlock with extent-same and readpage btrfs: pass unaligned length to btrfs_cmp_data() Btrfs: fix fsync after truncate when no_holes feature is enabled Btrfs: fix fsync xattr loss in the fast fsync path Btrfs: fix fsync data loss after append write Btrfs: fix crash on close_ctree() if cleaner starts new transaction Btrfs: fix race between caching kthread and returning inode to inode cache Btrfs: use kmem_cache_free when freeing entry in inode cache Btrfs: fix race between balance and unused block group deletion btrfs: add error handling for scrub_workers_get() btrfs: cleanup noused initialization of dev in btrfs_end_bio() btrfs: qgroup: allow user to clear the limitation on qgroup
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Kevin Hilman: "A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and prima2 as well as a few arm64-specific DT fixes. This series also includes a late to support a new Allwinner (sunxi) SoC, but since it's rather simple and isolated to the platform-specific code, it's included it for this -rc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG arm: dts: vexpress: add missing CCI PMU device node to TC2 arm: dts: vexpress: describe all PMUs in TC2 dts GICv3: Add ITS entry to THUNDER dts arm64: dts: Add poweroff button device node for APM X-Gene platform ARM: dts: am4372.dtsi: disable rfbi ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2 ARM: dts: am4372: Add emif node Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation ARM: prima2: move to use REGMAP APIs for rtciobrg ARM: dts: atlas7: add pinctrl and gpio descriptions ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps memory: omap-gpmc: Fix parsing of devices
-
Thomas Gleixner authored
Dan reported that the recent changes to the broadcast code introduced a potential NULL dereference. Add the proper check. Fixes: e0454311 "tick/broadcast: Sanity check the shutdown of the local clock_event" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 10 Jul, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "We have one important patch from Dave Anglin and myself which fixes PTE/TLB race conditions which caused random segmentation faults on our debian buildd servers, and one patch from Alex Ivanov which speeds up the graphical text console on the STI framebuffer driver" * 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results stifb: Implement hardware accelerated copyarea
-
-
