- 09 Feb, 2007 40 commits
-
-
Clemens Ladisch authored
Load the DSP code using request_firmware(), if possible, instead of using the built-in blob. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Load the YSS225 register initialization data using request_firmware(), if possible, instead of using the built-in data blob. Signed-off-by:
-
Clemens Ladisch authored
Instead of using a somewhat algorithmic approach of initializing the YSS225's registers, just use a simple series of port/value pairs. This makes it easier to later replace or entirely remove the register data blob. Signed-off-by:
-
Clemens Ladisch authored
Load the CSP programs using request_firmware(), if possible, instead of using the built-in firmware blobs. Signed-off-by:
-
Hubert Kahlert authored
This patch by Frank Mandarino and Hubert Kahlert fixes a bug in the AT91 SSC (i2s) shutdown code that would erroneously disable other AT91 peripheral clocks. Signed-off-by:
Hubert Kahlert <hkahlert@hk-datentechnik.de> Signed-off-by:
Frank Mandarino <fmandarino@endrelia.com> Signed-off-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Matt Porter authored
Adds support for digital microphone pin widgets on SigmaTel codecs. Enables support only on the 9205 codecs for now. Signed-off-by:
Matt Porter <mporter@embeddedalley.com> Signed-off-by:
-
Takashi Iwai authored
Add a proper model entry (3stack) for Lenovo A60 desktop with AD1986a codec to fix noise problems. Signed-off-by:
-
Takashi Iwai authored
Don't enable power-saving mode on drivers that don't support it. The supporting drivers set AC97_SCAP_POWER_SAVE to scaps at creation of ac97 instance. Currently enable on the following drivers: intel8x0, intel8x0m, atiixp, atiixp-modem, via82xx and via82xx-modem. Also, a bit clean up of power-saving stuff: - Don't create an own workq - Remove superfluous ifdefs Signed-off-by:
-
Mariusz Domanski authored
This patch adds support for Asus laptops (for example: Asus A6Rp-AP002). Signed-off-by:
Mariusz Domanski <mariook@wp.pl> Signed-off-by:
-
Liam Girdwood authored
This patch adds support for the DAI BCLK to be generated by multiplying Rate * Channels * Word Size (RCW). This now gives 3 options for BCLK clocking and synchronisation :- 1. BCLK = Rate * x 2. BCLK = MCLK / x 3. BCLK = Rate * Chn * Word Size. (New) Changes:- o Add support for RCW generation of BCLK o Update Documentation to include RCW. o Update DAI documentation for label = value DAI modes. o Add RCW support to wm8731, wm8750 and pxa2xx-i2s drivers. Signed-off-by:
-
Frank Mandarino authored
This patch by Frank Mandarino updates the AT91RM9200 I2S DAI audio modes as follows:- o fixes a typo in the 16k mode o removes experimental 24k mode o adds a 32k mode. Signed-off-by:
-
Remy Bruno authored
Add DDS register support for RME9632 rev >= 152. This register sets the sample rate for these cards and is required in addition to the standard control register. It corresponds to a quartz divisor. Signed-off-by:
Remy Bruno <remy.bruno@trinnov.com> Signed-off-by:
-
Kailang Yang authored
Changes from Realtek driver: - New models hippo and hippo_1 for ALC262 - New models tagra-dig and tagra-2ch-dig for ALC883 - New id for ALC660 codec chip Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Tobin Davis authored
This patch adds support for Toshiba laptops. Code is from RealTek's alsa-driver-1.0.12-4.05b tree. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Liam Girdwood authored
This patch fixes some build warnings in soc-core.c Changes:- o Check the return value of soc_ac97_dev_register() o Check return value of calls to device_create_file() Signed-off-by:
Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Jerome Demange authored
Signed-off-by:
Jerome Demange <jdemange@cict.fr> Signed-off-by:
-
Remy Bruno authored
Add support for AES32. Difference between MADI and AES32 is done through revision. Master support is not finished for now (RME so-called DDS feature is not supported yet) Signed-off-by:
-
Takashi Iwai authored
Remove trailing whitespaces from soc/* files added by the conversion to C99-style initialization. Signed-off-by:
-
Liam Girdwood authored
This patch fixes a build failure when ASoC debug is enabled. Signed-off-by:
-
Takashi Iwai authored
Added a missing comma in the medion patch. Signed-off-by:
-
Liam Girdwood authored
This patch suggested by Takashi changes the DAI capabilities definitions in pxa-i2s.c, at91rm9200-i2s.c, wm8731.c, wm8750.c and wm9712.c to use a label = value style. Signed-off-by:
-
Tobin Davis authored
This patch adds audio support for Medion's line of laptops, based on code shipped with the laptops. Microphone support is still being explored. Signed-off-by:
-
Liam Girdwood authored
This patch builds ASoC pxa2xx support for Corgi, Spitz, Tosa and Poodle Zaurus machines. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C5600 (Poodle) machine. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C6000 (Tosa) machine. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Dirk Opfer <Dirk@Opfer-Online.de> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C1000/SL-C3x00 (Akita/Spitz) machines. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Liam Girdwood authored
This patch adds Alsa audio support to the Sharp Zaurus SL-C7x0/C860 (Corgi) machines. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Graeme Gregory <dp@xora.org.uk> Signed-off-by:
-
Liam Girdwood authored
This patch adds pxa2xx AC97 ASoC audio support. It's based on sound/arm/pxa-ac97 by Nicolas Pitre with the following differences. o Modified driver structure to use ASoC core PCM callbacks. o Removed AC97 configuration function (all handled in ASoC core) o Added and exported ASoC DAI configuration table. o Added DMA support for AUX DAC and Mic ADC o Separated out AC97 reset into cold and warm reset functions. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
Nicolas Pitre <nico@cam.org> Signed-off-by:
-
Liam Girdwood authored
This patch adds pxa2xx I2S ASoC audio support. Features:- o Supports playback/capture o 16 bit PCM o 8k - 96k sample rates o Supports master and slave mode. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Liam Girdwood authored
This patch adds pxa2xx ASoC DMA audio support. It's based on sound/arm/pxa-pcm.c by Nicolas Pitre with the following differences. o Modified driver structure to use ASoC core PCM callbacks and data structures. o Registration with ASoC core. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by:
-
Clemens Ladisch authored
Load the DSP and controller microcode using request_firmware(), if possible, instead of using the built-in firmware. Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
James Courtier-Dutton <James@superbug.co.uk> Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
-
Takashi Iwai authored
Fixed the irq handler in soc/at91-at91rm9200-i2s.c to follow the new style without pt_regs. Signed-off-by:
-
James Courtier-Dutton authored
Signed-off-by:
-
Remy Bruno authored
Added the support for mixer matrix of RME9632 rev 152. Signed-off-by:
-
Clemens Ladisch authored
Let the emu10k1 driver select FW_LOADER because the new Emu1010 support requires it. Signed-off-by:
-
Clemens Ladisch authored
Let the AudioScience, Echoaudio and Riptide drivers select FW_LOADER instead of depending on it so that they can be configured without having to enable FW_LOADER manually. Signed-off-by:
-
Clemens Ladisch authored
Properly quote a string that had an embedded newline. Signed-off-by:
-
Frank Mandarino authored
This patch adds a Makefile and Kconfig to build the ASoC AT91RM9200 support. Signed-off-by:
-
