- 29 Aug, 2011 28 commits
-
-
Jack Steiner authored
commit 05e33fc2 upstream. Delete the 10 msec delay between the INIT and SIPI when starting slave cpus. I can find no requirement for this delay. BIOS also has similar code sequences without the delay. Removing the delay reduces boot time by 40 sec. Every bit helps. Signed-off-by:
Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.comSigned-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
H. Peter Anvin authored
commit 7ca0758c upstream. When we enter a 32-bit system call via SYSENTER or SYSCALL, we shuffle the arguments to match the int $0x80 calling convention. This was probably a design mistake, but it's what it is now. This causes errors if the system call as to be restarted. For SYSENTER, we have to invoke the instruction from the vdso as the return address is hardcoded. Accordingly, we can simply replace the jump in the vdso with an int $0x80 instruction and use the slower entry point for a post-restart. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFztZ=r5wa0x26KJQxvZOaQq8s2v3u50wCyJcA-Sc4g8gQ@mail.gmail.comSigned-off-by:
-
Paul Fox authored
commit a3ea14df upstream. When executing EC commands, only waiting when there are still more bytes to write is usually fine. However, if the system suspends very quickly after a call to olpc_ec_cmd(), the last data byte may not yet be transferred to the EC, and the command will not complete. This solves a bug where the SCI wakeup mask was not correctly written when going into suspend. It means that sometimes, on XO-1.5 (but not XO-1), the devices that were marked as wakeup sources can't wake up the system. e.g. you ask for wifi wakeups, suspend, but then incoming wifi frames don't wake up the system as they should. Signed-off-by:
Paul Fox <pgf@laptop.org> Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Andres Salomon <dilinger@queued.net> Signed-off-by:
-
Stefano Stabellini authored
commit 3c05c4be upstream. Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a8 Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Jan Beulich authored
commit ccbcdf7c upstream. The order-based approach is not only less efficient (requiring a shift and a compare, typical generated code looking like this mov eax, [machine_to_phys_order] mov ecx, eax shr ebx, cl test ebx, ebx jnz ... whereas a direct check requires just a compare, like in cmp ebx, [machine_to_phys_nr] jae ... ), but also slightly dangerous in the 32-on-64 case - the element address calculation can wrap if the next power of two boundary is sufficiently far away from the actual upper limit of the table, and hence can result in user space addresses being accessed (with it being unknown what may actually be mapped there). Additionally, the elimination of the mistaken use of fls() here (should have been __fls()) fixes a latent issue on x86-64 that would trigger if the code was run on a system with memory extending beyond the 44-bit boundary. Signed-off-by:
Jan Beulich <jbeulich@novell.com> [v1: Based on Jeremy's feedback] Signed-off-by:
-
Stefan Bader authored
commit 89153b5c upstream. Avoid telling users to use xvde and onwards when using xvde. Acked-by:
-
Stefan Bader authored
commit 196cfe2a upstream. These were intended to avoid the namespace clash when representing emulated IDE and SCSI devices. However that seems to confuse users more than expected (a disk defined as sda becomes xvde). So for now go back to the scheme which does no adjustments. This will break when mixing IDE and SCSI names in the configuration of guests but should be by now expected. Acked-by:
-
Theodore Ts'o authored
commit 9dd75f1f upstream. Bug discovered by Jan Kara: Finally, commit 1449032b returned back the old IO submission code but apparently it forgot to return the old handling of uninitialized buffers so we unconditionnaly call block_write_full_page() without specifying end_io function. So AFAICS we never convert unwritten extents to written in some cases. For example when I mount the fs as: mount -t ext4 -o nomblk_io_submit,dioread_nolock /dev/ubdb /mnt and do int fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0600); char buf[1024]; memset(buf, 'a', sizeof(buf)); fallocate(fd, 0, 0, 16384); write(fd, buf, sizeof(buf)); I get a file full of zeros (after remounting the filesystem so that pagecache is dropped) instead of seeing the first KB contain 'a's. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Tao Ma authored
commit 32c80b32 upstream. EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten should be done simultaneously since ext4_end_io_nolock always clear the flag and decrease the counter in the same time. We don't increase i_aiodio_unwritten when setting EXT4_IO_END_UNWRITTEN so it will go nagative and causes some process to wait forever. Part of the patch came from Eric in his e-mail, but it doesn't fix the problem met by Michael actually. http://marc.info/?l=linux-ext4&m=131316851417460&w=2 Reported-and-Tested-by: Michael Tokarev<mjt@tls.msk.ru> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
-
Jiaying Zhang authored
commit 2581fdc8 upstream. Flush inode's i_completed_io_list before calling ext4_io_wait to prevent the following deadlock scenario: A page fault happens while some process is writing inode A. During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Also moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode(). During inode deleteion, ext4_evict_inode() is called before ext4_destroy_inode() and in ext4_evict_inode(), we may call ext4_truncate() without holding i_mutex lock. As a result, there is a race between flush_completed_IO that is called from ext4_ext_truncate() and ext4_end_io_work, which may cause corruption on an io_end structure. This change moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode() to resolve the race between ext4_truncate() and ext4_end_io_work during inode deletion. Signed-off-by:
Jiaying Zhang <jiayingz@google.com> Signed-off-by:
-
Curt Wohlgemuth authored
commit 441c8508 upstream. ext4_should_writeback_data() had an incorrect sequence of tests to determine if it should return 0 or 1: in particular, even in no-journal mode, 0 was being returned for a non-regular-file inode. This meant that, in non-journal mode, we would use ext4_journalled_aops for directories, symlinks, and other non-regular files. However, calling journalled aop callbacks when there is no valid handle, can cause problems. This would cause a kernel crash with Jan Kara's commit 2d859db3 ("ext4: fix data corruption in inodes with journalled data"), because we now dereference 'handle' in ext4_journalled_write_end(). I also added BUG_ONs to check for a valid handle in the obviously journal-only aops callbacks. I tested this running xfstests with a scratch device in these modes: - no-journal - data=ordered - data=writeback - data=journal All work fine; the data=journal run has many failures and a crash in xfstests 074, but this is no different from a vanilla kernel. Signed-off-by:
Curt Wohlgemuth <curtw@google.com> Signed-off-by:
-
Daniel T Chen authored
commit eade7b28 upstream. BugLink: https://bugs.launchpad.net/bugs/826081 The original reporter needs 'Headphone Jack Sense' enabled to have audible audio, so add his PCI SSID to the whitelist. Reported-and-tested-by: Muhammad Khurram Khan Signed-off-by:
Daniel T Chen <crimsun@ubuntu.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Daniel Mack authored
commit da6094ea upstream. The snd_usb_caiaq driver currently assumes that output urbs are serviced in time and doesn't track when and whether they are given back by the USB core. That usually works fine, but due to temporary limitations of the XHCI stack, we faced that urbs were submitted more than once with this approach. As it's no good practice to fire and forget urbs anyway, this patch introduces a proper bit mask to track which requests have been submitted and given back. That alone however doesn't make the driver work in case the host controller is broken and doesn't give back urbs at all, and the output stream will stop once all pre-allocated output urbs are consumed. But it does prevent crashes of the controller stack in such cases. See http://bugzilla.kernel.org/show_bug.cgi?id=40702 for more details. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-and-tested-by:
Matej Laitl <matej@laitl.cz> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit 38b65190 upstream. The recent fix for testing dB range at the mixer creation time seems to cause regressions in some devices. In such devices, reading the dB info at probing time gives an error, thus both dBmin and dBmax are still zero, and TLV flag isn't set although the later read of dB info succeeds. This patch adds a workaround for such a case by assuming that the later read will succeed. In future, a similar test should be performed in a case where a wrong dB range is seen even in the later read. Signed-off-by:
-
liubo authored
commit 34f3e4f2 upstream. When btrfs recovers from a crash, it may hit the oops below: ------------[ cut here ]------------ kernel BUG at fs/btrfs/inode.c:4580! [...] RIP: 0010:[<ffffffffa03df251>] [<ffffffffa03df251>] btrfs_add_link+0x161/0x1c0 [btrfs] [...] Call Trace: [<ffffffffa03e7b31>] ? btrfs_inode_ref_index+0x31/0x80 [btrfs] [<ffffffffa04054e9>] add_inode_ref+0x319/0x3f0 [btrfs] [<ffffffffa0407087>] replay_one_buffer+0x2c7/0x390 [btrfs] [<ffffffffa040444a>] walk_down_log_tree+0x32a/0x480 [btrfs] [<ffffffffa0404695>] walk_log_tree+0xf5/0x240 [btrfs] [<ffffffffa0406cc0>] btrfs_recover_log_trees+0x250/0x350 [btrfs] [<ffffffffa0406dc0>] ? btrfs_recover_log_trees+0x350/0x350 [btrfs] [<ffffffffa03d18b2>] open_ctree+0x1442/0x17d0 [btrfs] [...] This comes from that while replaying an inode ref item, we forget to check those old conflicting DIR_ITEM and DIR_INDEX items in fs/file tree, then we will come to conflict corners which lead to BUG_ON(). Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Tested-by:
Andy Lutomirski <luto@mit.edu> Signed-off-by:
Chris Mason <chris.mason@oracle.com> Signed-off-by:
-
Kay Sievers authored
commit 05eb0f25 upstream. LOOP_CLR_FD takes lo->lo_ctl_mutex and tries to remove the loop sysfs files. Sysfs calls show() and waits for lo->lo_ctl_mutex. LOOP_CLR_FD waits for show() to finish to remove the sysfs file. cat /sys/class/block/loop0/loop/backing_file mutex_lock_nested+0x176/0x350 ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop] ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop] loop_attr_do_show_backing_file+0x2f/0xd0 [loop] dev_attr_show+0x1b/0x60 ? sysfs_read_file+0x86/0x1a0 ? __get_free_pages+0x12/0x50 sysfs_read_file+0xaf/0x1a0 ioctl(LOOP_CLR_FD): wait_for_common+0x12c/0x180 ? try_to_wake_up+0x2a0/0x2a0 wait_for_completion+0x18/0x20 sysfs_deactivate+0x178/0x180 ? sysfs_addrm_finish+0x43/0x70 ? sysfs_addrm_start+0x1d/0x20 sysfs_addrm_finish+0x43/0x70 sysfs_hash_and_remove+0x85/0xa0 sysfs_remove_group+0x59/0x100 loop_clr_fd+0x1dc/0x3f0 [loop] lo_ioctl+0x223/0x7a0 [loop] Instead of taking the lo_ctl_mutex from sysfs code, take the inner lo->lo_lock, to protect the access to the backing_file data. Thanks to Tejun for help debugging and finding a solution. Cc: Milan Broz <mbroz@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Jens Axboe <jaxboe@fusionio.com> Signed-off-by:
-
Josef Bacik authored
commit d5e2003c upstream. We have a problem where if a user specifies discard but doesn't actually support it we will return EOPNOTSUPP from btrfs_discard_extent. This is a problem because this gets called (in a fashion) from the tree log recovery code, which has a nice little BUG_ON(ret) after it, which causes us to fail the tree log replay. So instead detect wether our devices support discard when we're adding them and then don't issue discards if we know that the device doesn't support it. And just for good measure set ret = 0 in btrfs_issue_discard just in case we still get EOPNOTSUPP so we don't screw anybody up like this again. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Suresh Siddha authored
commit 6d3321e8 upstream. MTRR rendezvous sequence using stop_one_cpu_nowait() can potentially happen in parallel with another system wide rendezvous using stop_machine(). This can lead to deadlock (The order in which works are queued can be different on different cpu's. Some cpu's will be running the first rendezvous handler and others will be running the second rendezvous handler. Each set waiting for the other set to join for the system wide rendezvous, leading to a deadlock). MTRR rendezvous sequence is not implemented using stop_machine() as this gets called both from the process context aswell as the cpu online paths (where the cpu has not come online and the interrupts are disabled etc). stop_machine() works with only online cpus. For now, take the stop_machine mutex in the MTRR rendezvous sequence that gets called from an online cpu (here we are in the process context and can potentially sleep while taking the mutex). And the MTRR rendezvous that gets triggered during cpu online doesn't need to take this stop_machine lock (as the stop_machine() already ensures that there is no cpu hotplug going on in parallel by doing get_online_cpus()) TBD: Pursue a cleaner solution of extending the stop_machine() infrastructure to handle the case where the calling cpu is still not online and use this for MTRR rendezvous sequence. fixes: https://bugzilla.novell.com/show_bug.cgi?id=672008Reported-by:
Vadim Kotelnikov <vadimuzzz@inbox.ru> Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110623182056.807230326@sbsiddha-MOBL3.sc.intel.comSigned-off-by:
-
Trond Myklebust authored
commit 910ac68a upstream. If the client is in the process of resetting the session when it receives a callback, then returning NFS4ERR_DELAY may cause a deadlock with the DESTROY_SESSION call. Basically, if the client returns NFS4ERR_DELAY in response to the CB_SEQUENCE call, then the server is entitled to believe that the client is busy because it is already processing that call. In that case, the server is perfectly entitled to respond with a NFS4ERR_BACK_CHAN_BUSY to any DESTROY_SESSION call. Fix this by having the client reply with a NFS4ERR_BADSESSION in response to the callback if it is resetting the session. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit 55a67399 upstream. Currently, there is no guarantee that we will call nfs4_cb_take_slot() even though nfs4_callback_compound() will consistently call nfs4_cb_free_slot() provided the cb_process_state has set the 'clp' field. The result is that we can trigger the BUG_ON() upon the next call to nfs4_cb_take_slot(). This patch fixes the above problem by using the slot id that was taken in the CB_SEQUENCE operation as a flag for whether or not we need to call nfs4_cb_free_slot(). It also fixes an atomicity problem: we need to set tbl->highest_used_slotid atomically with the check for NFS4_SESSION_DRAINING, otherwise we end up racing with the various tests in nfs4_begin_drain_session(). Signed-off-by:
-
Boaz Harrosh authored
commit 20618b21 upstream. When we have a situation that the number of pages we want to encode is bigger then the size of the bio. (Which can currently happen only when all IO is going to a single device .e.g group_width==1) then the IO is submitted short and we report back only the amount of bytes we actually wrote/read and all is fine. BUT ... There was a bug that the current length counter was advanced before the fail to add the extra page, and we come to a situation that the CDB length was one-page longer then the actual bio size, which is of course rejected by the osd-target. While here also fix the bio size calculation, in the case that we received more then one group of devices. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Boaz Harrosh authored
commit 9af7db32 upstream. There were bugs in the case of partial layout where olo_comp_index is not zero. This used to work and was tested but one of the later cleanup SQUASHMEs broke it and was not tested since. Also add a dprint that specify those received layout parameters. Everything else was already printed. Signed-off-by:
-
Len Brown authored
commit 17edf2d7 upstream. Fix the printk_once() so that it actually prints (didn't print before due to a stray comma.) [ hpa: changed to an incremental patch and adjusted the description accordingly. ] Signed-off-by:
Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1107151732480.18606@x980Signed-off-by:
-
Steve French authored
commit 13589c43 upstream. CIFS cleanup_volume_info_contents() looks like having a memory corruption problem. When UNCip is set to "&vol->UNC[2]" in cifs_parse_mount_options(), it should not be kfree()-ed in cleanup_volume_info_contents(). Introduced in commit b946845aSigned-off-by:
J.R. Okajima <hooanon05@yahoo.co.jp> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Mathias Krause authored
commit 8cf2d239 upstream. Based on a patch from the PaX Team, found during a clang analysis pass. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Acked-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Cc: PaX Team <pageexec@freemail.hu> Signed-off-by:
-
Timo Warns authored
commit 338d0f0a upstream. Signed-off-by:
Timo Warns <warns@pre-sense.de> Signed-off-by:
-
Jeff Layton authored
commit fa71f447 upstream. Running the cthon tests on a recent kernel caused this message to pop occasionally: CIFS VFS: did not end path lookup where expected namelen is 0 Some added debugging showed that namelen and dfsplen were both 0 when this occurred. That means that the read_seqretry returned true. Assuming that the comment inside the if statement is true, this should be harmless and just means that we raced with a rename. If that is the case, then there's no need for alarm and we can demote this to cFYI. While we're at it, print the dfsplen too so that we can see what happened here if the message pops during debugging. Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
jhbird.choi@samsung.com authored
commit 1dd75f91 upstream. (!msk & 0x01) should be !(msk & 0x01) Signed-off-by:
Jonghwan Choi <jhbird.choi@samsung.com> Link: http://lkml.kernel.org/r/1311229754-6003-1-git-send-email-jhbird.choi@samsung.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 17 Aug, 2011 12 commits
-
-
Greg Kroah-Hartman authored
-
Jonathan Nieder authored
commit aba8d056 upstream. In addition to /etc/perfconfig and $HOME/.perfconfig, perf looks for configuration in the file ./config, imitating git which looks at $GIT_DIR/config. If ./config is not a perf configuration file, it fails, or worse, treats it as a configuration file and changes behavior in some unexpected way. "config" is not an unusual name for a file to be lying around and perf does not have a private directory dedicated for its own use, so let's just stop looking for configuration in the cwd. Callers needing context-sensitive configuration can use the PERF_CONFIG environment variable. Requested-by:
Christian Ohm <chr.ohm@gmx.net> Cc: 632923@bugs.debian.org Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Christian Ohm <chr.ohm@gmx.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110805165838.GA7237@elie.gateway.2wire.netSigned-off-by:
Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit d5811e87 upstream. Attempting to try and turn off disconnected display hw in the hotput handler lead to more problems than it helped. For now just register an event and only attempt the do something interesting with DP. Other connectors are just too problematic: - Some systems have an HPD pin assigned to LVDS, but it's rarely if ever connected properly and we don't really care about hpd events on LVDS anyway since it's always connected. - The HPD pin is wired up correctly for eDP, but we don't really have to do anything since the events since it's always connected. - Some HPD pins fire more than once when you connect/disconnect - etc. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39882Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 33ae1827 upstream. Need to add support for 4 crtcs when setting the possible crtcs for the encoders. Signed-off-by:
-
Alex Deucher authored
commit 73104b5c upstream. If we get a hotplug event on an connector that is off, don't attempt to turn it on or off, it should already be off. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=728228Signed-off-by:
-
Rusty Russell authored
commit e22a5398 upstream. The CONFIG_RELOCATABLE code tries to align the unpack destination to the value of 'kernel_alignment' in the setup_hdr. If that's 0, it tries to unpack to address 0, which in fact causes the gunzip code to call 'error("Out of memory while allocating output buffer")'. The bootloader (ie. the lguest Launcher in this case) should be doing setting this field; the normal bzImage is 16M, we can use the same. Reported-by:
Stefanos Geraggelos <sgerag@cslab.ece.ntua.gr> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Clemens Ladisch authored
commit f982f915 upstream. Commit db64fe02 ("mm: rewrite vmap layer") introduced code that does address calculations under the assumption that VMAP_BLOCK_SIZE is a power of two. However, this might not be true if CONFIG_NR_CPUS is not set to a power of two. Wrong vmap_block index/offset values could lead to memory corruption. However, this has never been observed in practice (or never been diagnosed correctly); what caught this was the BUG_ON in vb_alloc() that checks for inconsistent vmap_block indices. To fix this, ensure that VMAP_BLOCK_SIZE always is a power of two. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=31572Reported-by:
Pavel Kysilka <goldenfish@linuxsoft.cz> Reported-by:
Matias A. Fonzo <selk@dragora.org> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Nick Piggin <npiggin@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Bob Copeland authored
commit bdc71bc5 upstream. This cleans up error handling for the beacon in case of dma mapping failure. We need to free the skb when dma mapping fails instead of nulling and leaking the pointer, and we should bail out to avoid giving the hardware the bad descriptor. Finally, we need to perform the null check after trying to update the beacon, or else beacons will never be sent after a single mapping failure. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stephen Warren authored
commit 29591ed4 upstream. Two issues were preventing module snd-soc-tegra-wm8903.ko from being removed and re-inserted: a) The speaker-enable GPIO is hosted by the WM8903 chip. This GPIO must be freed before snd_soc_unregister_card() is called, because that triggers wm8903.c:wm8903_remove(), which calls gpiochip_remove(), which then fails if any of the GPIOs are in use. To solve this, free all GPIOs first, so the code doesn't care where they come from. b) We need to call snd_soc_jack_free_gpios() to match the call to snd_soc_jack_add_gpios() during initialization. Without this, the call to snd_soc_jack_add_gpios() fails during any subsequent modprobe and initialization, since the GPIO and IRQ are already registered. In turn, this causes the headphone state not to be monitored, so the headphone is assumed not to be plugged in, and the audio path to it is never enabled. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Stephen Warren authored
commit a96edd59 upstream. Not all PCM devices have all sub-streams. Specifically, the SPDIF driver only supports playback and hence has no capture substream. Check whether a substream exists before dereferencing it, when de-allocating DMA buffers in tegra_pcm_deallocate_dma_buffer. Signed-off-by:
Liam Girdwood <lrg@ti.com> Signed-off-by:
-
Mark Brown authored
commit 66780504 upstream. The I2C address is misformatted and would never match. Signed-off-by:
-
Daniel Mack authored
commit 15439bde upstream. This fixes faulty outbount packets in case the inbound packets received from the hardware are fragmented and contain bogus input iso frames. The bug has been there for ages, but for some strange reasons, it was only triggered by newer machines in 64bit mode. Signed-off-by:
William Light <wrl@illest.net> Reported-by:
Pedro Ribeiro <pedrib@gmail.com> Signed-off-by:
-
