The sysrq code acquired a kref leak. Fix it by passing the tty separately
from the caller (thus effectively using the callers kref which all the
callers hold anyway)
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can't go around calling all sorts of magic per character functions at
full rate 3G data speed.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: fix compilation warnings
  UBI: fix NOR flash recovery
  UBI: nicify image sequence number handling
  UBI: add image sequence number to EC header
  UBI: remove bogus debugging checks
  UBI: add empty eraseblocks verification

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix corruption dump
  UBIFS: clean up free space checking
  UBIFS: small amendments in the LEB scanning code
  UBIFS: dump a little more in case of corruptions
  MAINTAINERS: update ahunter's e-mail address
  UBIFS: allow more than one volume to be mounted
  UBIFS: fix assertion warning
  UBIFS: minor spelling and grammar fixes
  UBIFS: fix 64-bit divisions in debug print
  UBIFS: few spelling fixes
  UBIFS: set write-buffer timout to 3-5 seconds
  UBIFS: slightly optimize write-buffer timer usage
  UBIFS: improve debugging messaged
  UBIFS: fix integer overflow warning

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] define KTIME_SCALAR for 32-bit s390
  [S390] add generic atomic64 support for 31 bit
  [S390] improve suspend/resume error messages
  [S390] set SCHED_OMIT_FRAME_POINTER for s390
  [S390] add __ucmpdi2() helper function
  [S390] perf_counter build fix
  [S390] shutdown actions: save/return rc from init function
  [S390] dasd: correct debugfeature sense dump
  [S390] udelay: disable lockdep to avoid false positives
  [S390] monreader: fix dev_set_drvdata conversion
  [S390] sclp: fix compile error for !SCLP_CONSOLE

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  osdblk: Adjust queue limits to lower device's limits
  osdblk: a Linux block device for OSD objects
  MAINTAINERS: Add osd maintained files (F:)
  exofs: Avoid using file_fsync()
  exofs: Remove IBM copyrights
  exofs: Fix bio leak in error handling path (sync read)

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
  drm/i915: Fix for LVDS VBT change on IGDNG
  drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
  drm/i915: Refactor calls to unmap_mapping_range
  drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
  drm: Disable the unused connectors explicitly when resuming with KMS.
  drm/i915: Restore the KMS modeset for every activated CRTC
  drm/i915: Fix harmless warning from patch merged after i2c rework.
  drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
  drm/i915: Check the LID device to decide whether the LVDS should be initialized
  drm/i915: Move lock to more reasonable location
  drm/i915: Add gtt_offset to gem object list debugfs output
  drm/i915: Remove gtt_bound from drm_i915_gem_object
  drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.
  drm/i915: crt fetch EDID by DVI-I converter on G4x platform
  drm/i915: Don't update display FIFO watermark on IGDNG
  drm/i915: Adjust DisplayPort clocks to use 96MHz reference
  drm/i915: Make driver less chatty
  drm/i915: fix up a raw 64bit divide
  drm/i915: enable sdvo lvds scaling function.
  drm/i915: Set SSC frequency for 8xx chips correctly
  ...

exception.txt only explains the code on x86, so it's better to
move it into Documentation/x86 directory.

And also rename it to exception-tables.txt which looks much
more reasonable.

This patch is on top of the previous one.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update Documentation/exception.txt.
Remove trailing whitespaces in it.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building v2.6.31-rc2-344-g69ca06c9, the following build errors are
found due to missing includes:

 CC [M]  fs/fuse/dev.o
fs/fuse/dev.c: In function ‘request_end’:
fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function)
...
fs/nfs/write.c: In function ‘nfs_set_page_writeback’:
fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function)

Signed-off-by: Larry Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: reset oom_cfqq in cfq_set_request()
  block: fix sg SG_DXFER_TO_FROM_DEV regression
  block: call blk_scsi_ioctl_init()
  Fix congestion_wait() sync/async vs read/write confusion

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix disorder in cp count on error during deleting checkpoints
  nilfs2: fix lockdep warning between regular file and inode file
  nilfs2: fix incorrect KERN_CRIT messages in case of write failures
  nilfs2: fix hang problem of log writer which occurs after write failures
  nilfs2: remove unlikely directive causing mis-conversion of error code

Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dma-debug: Fix the overlap() function to be correct and readable
  oprofile: reset bt_lost_no_mapping with other stats
  x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
  signals: declare sys_rt_tgsigqueueinfo in syscalls.h
  rcu: Mark Hierarchical RCU no longer experimental
  dma-debug: Put all hash-chain locks into the same lock class
  dma-debug: fix off-by-one error in overlap function

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  perf report: Add "Fractal" mode output - support callchains with relative overhead rate
  perf_counter tools: callchains: Manage the cumul hits on the fly
  perf report: Change default callchain parameters
  perf report: Use a modifiable string for default callchain options
  perf report: Warn on callchain output request from non-callchain file
  x86: atomic64: Inline atomic64_read() again
  x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
  x86: atomic64: Improve atomic64_xchg()
  x86: atomic64: Export APIs to modules
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
  x86: atomic64: Fix unclean type use in atomic64_xchg()
  x86: atomic64: Make atomic_read() type-safe
  x86: atomic64: Reduce size of functions
  x86: atomic64: Improve atomic64_add_return()
  x86: atomic64: Improve cmpxchg8b()
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
  x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
  perf report: Annotate variable initialization
  ...

Optimize cond_resched() by removing one conditional.

Currently cond_resched() checks system_state ==
SYSTEM_RUNNING in order to avoid scheduling before the
scheduler is running.

We can however, as per suggestion of Matt, use
PREEMPT_ACTIVE to accomplish that very same.
Suggested-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull the initial preempt_count value into a single
definition site.

Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.

The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.

Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IGDNG mobile chip's LVDS data block removes panel fitting
register definition. So this fixes offset for LVDS timing
block parsing. Thanks for Michael Fu to catch this.
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

As of 52dc7d32, we could leave an old
linear GTT mapping in place, so that apps trying to GTT-mapped write in
tiled data wouldn't get the fence added, and garbage would get displayed.
Signed-off-by: Eric Anholt <eric@anholt.net>

As we call unmap_mapping_range() twice in identical fashion, refactor
and attempt to explain why we need to call unmap_mapping_range().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

Linus noticed how unclean and buggy the overlap() function is:

 - It uses convoluted (and bug-causing) positive checks for
   range overlap - instead of using a more natural negative
   check.

 - Even the positive checks are buggy: a positive intersection
   check has four natural cases while we checked only for three,
   missing the (addr < start && addr2 == end) case for example.

 - The variables are mis-named, making it non-obvious how the
   check was done.

 - It needlessly uses u64 instead of unsigned long. Since these
   are kernel memory pointers and we explicitly exclude highmem
   ranges anyway we cannot ever overflow 32 bits, even if we
   could. (and on 64-bit it doesnt matter anyway)

All in one, this function needs a total revamp. I used Linus's
suggestions minus the paranoid checks (we cannot overflow really
because if we get totally bad DMA ranges passed far more things
break in the systems than just DMA debugging). I also fixed a
few other small details i noticed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In KMS mode we now use the normal mode-setting paths to set the modes
back to the current configuration, so we don't need to also run the more
limited non-KMS implementation of modesetting for resume.
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Restore the modeset for every activated CRTC in course of resume.
This is realized by calling the function of drm_helper_resume_force_mode.
Note: it is meaningful only for the KMS mode.

https://bugs.freedesktop.org/show_bug.cgi?id=21719
https://bugs.freedesktop.org/show_bug.cgi?id=21708
https://bugs.freedesktop.org/show_bug.cgi?id=22285
https://bugs.freedesktop.org/show_bug.cgi?id=22263Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

Signed-off-by: Eric Anholt <eric@anholt.net>

This is seen on some G41 systems, where the BIOS will consume all but
a few KB of the aperture.  This should be bad for all operating systems, as
it means that the OS can't dynamically manage memory between graphics and
the rest of the system, and OSes that did static memory management
statically add memory in addition to the BIOS allocation anyway.  So, instead
of working around it, just fail out verbosely.

fd.o bug #21574
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix trace_print_seq()
  kprobes: No need to unlock kprobe_insn_mutex
  tracing/fastboot: Document the need of initcall_debug
  trace_export: Repair missed fields
  tracing: Fix stack tracer sysctl handling

In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.

Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.

Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use
the block layer mapping API (2.6.28).

Douglas Gilbert explained SG_DXFER_TO_FROM_DEV:

http://www.spinics.net/lists/linux-scsi/msg37135.html

=
The semantics of SG_DXFER_TO_FROM_DEV were:
   - copy user space buffer to kernel (LLD) buffer
   - do SCSI command which is assumed to be of the DATA_IN
     (data from device) variety. This would overwrite
     some or all of the kernel buffer
   - copy kernel (LLD) buffer back to the user space.

The idea was to detect short reads by filling the original
user space buffer with some marker bytes ("0xec" it would
seem in this report). The "resid" value is a better way
of detecting short reads but that was only added this century
and requires co-operation from the LLD.
=

This patch changes the block layer mapping API to support this
semantics. This simply adds another field to struct rq_map_data and
enables __bio_copy_iov() to copy data from user space even with READ
requests.

It's better to add the flags field and kills null_mapped and the new
from_user fields in struct rq_map_data but that approach makes it
difficult to send this patch to stable trees because st and osst
drivers use struct rq_map_data (they were converted to use the block
layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer
mapping API.

zhou sf reported this regiression and tested this patch:

http://www.spinics.net/lists/linux-scsi/msg37128.html
http://www.spinics.net/lists/linux-scsi/msg37168.htmlReported-by: zhou sf <sxzzsf@gmail.com>
Tested-by: zhou sf <sxzzsf@gmail.com>
Cc: stable@kernel.org
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.

This fixes a regression introduced by commit
018e0446Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Commit 1faa16d2 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

The bt_lost_no_mapping is not getting reset at the start of a
profiling run, thus the oprofiled.log shows erroneous values for this
statistic. The attached patch fixes this problem.
Signed-off-by: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support
  [WATCHDOG] SA1100 watchdog maximum timeout
  [WATCHDOG] w83697ug, fix lock imbalance
  [WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons

Remove call to the mx3fb_set_par() and the mx3fb_blank() before the
register_framebuffer().

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove call to the fb_set_par() before the register_framebuffer().

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap
locking"
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: when ATTR_READONLY is set, only clear write bits on non-directories
  cifs: remove cifsInodeInfo->inUse counter
  cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
  [CIFS] update cifs version number
  cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
  cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO
  cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo
  cifs: add pid of initiating process to spnego upcall info
  cifs: fix regression with O_EXCL creates and optimize away lookup
  cifs: add new cifs_iget function and convert unix codepath to use it

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  cxgb3: Fix crash caused by stashing wrong netdev_queue
  ixgbe: Fix coexistence of FCoE and Flow Director in 82599
  memory barrier: adding smp_mb__after_lock
  net: adding memory barrier to the poll and receive callbacks
  netpoll: Fix carrier detection for drivers that are using phylib
  includecheck fix: include/linux, rfkill.h
  p54: tx refused but queue active
  Atheros Kconfig needs to be dependent on WLAN_80211
  mac80211: fix docbook
  mac80211_hwsim: avoid NULL access
  ssb: Add support for 4318E
  b43: Add support for 4318E
  zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
  zd1211rw: 07b8:6001 is a ZD1211B
  r6040: bump driver version to 0.24 and date to 08 July 2009
  r6040: restore MIER register correctly when IRQ line is shared
  ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
  davinci_emac: fix kernel oops when changing MAC address while interface is down
  igb: set lan id prior to configuring phy
  mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
  ...

Looks like the change in ad361c98
wasn't compile tested.
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The short name of the achitecture is 'arch_perfmon'. This patch
changes the kernel parameter to use this name.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how
cxgb3 looks up the netdev_queue it stashes away in a qset during
initialization.  For multiport devices, the TX queue index it uses is
offset by the first_qset index of each port.  This leads to a crash
once LLTX is removed, since hard_start_xmit is called with one TX
queue lock held, while the TX reclaim timer task grabs a different
(wrong) TX queue lock when it frees skbs.

Fix this by removing the first_qset offset used to look up the TX
queue passed into t3_sge_alloc_qset() from setup_sge_qsets().
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR)
in 82599 and remove the disabling of FDIR when FCoE is enabled.

Currently, FDIR is turned off when FCoE is enabled under the assumption that
FCoE is always enabled with DCB being turned on. However, FDIR does not have
to be turned off all the time when FCoE is enabled since FCoE can be enabled
without DCB being turned on, e.g., use link pause only. This patch makes sure
that when DCB is turned on or off, FDIR is turned on or off correspondingly;
and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR
set up properly so FCoE and FDIR can coexist regardless of DCB being on or off.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>