[ Upstream commit db44bac4 ]

Use a couple shortcuts that will simplify a following bugfix.

Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit e6838a29 ]

A client can append random data to the end of an NFSv2 or NFSv3 RPC call
without our complaining; we'll just stop parsing at the end of the
expected data and ignore the rest.

Encoded arguments and replies are stored together in an array of pages,
and if a call is too large it could leave inadequate space for the
reply.  This is normally OK because NFS RPC's typically have either
short arguments and long replies (like READ) or long arguments and short
replies (like WRITE).  But a client that sends an incorrectly long reply
can violate those assumptions.  This was observed to cause crashes.

Also, several operations increment rq_next_page in the decode routine
before checking the argument size, which can leave rq_next_page pointing
well past the end of the page array, causing trouble later in
svc_free_pages.

So, following a suggestion from Neil Brown, add a central check to
enforce our expectation that no NFSv2/v3 call has both a large call and
a large reply.

As followup we may also want to rewrite the encoding routines to check
more carefully that they aren't running off the end of the page array.

We may also consider rejecting calls that have any extra garbage
appended.  That would be safer, and within our rights by spec, but given
the age of our server and the NFS protocol, and the fact that we've
never enforced this before, we may need to balance that against the
possibility of breaking some oddball client.
Reported-by: Tuomas Haanpää <thaan@synopsys.com>
Reported-by: Ari Kauppi <ari@synopsys.com>
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 3d615964 ]

DWC3 driver uses of_usb_get_phy_mode() which is
implemented in drivers/usb/phy/of.c and in bare minimal
configuration it might not be pulled in kernel binary.

In case of ARC or ARM this could be easily reproduced with
"allnodefconfig" +CONFIG_USB=m +CONFIG_USB_DWC3=m.

On building all ends-up with:
---------------------->8------------------
  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 5 modules
ERROR: "of_usb_get_phy_mode" [drivers/usb/dwc3/dwc3.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
---------------------->8------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6e4cac23 ]

The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry
the ignore_suspend flag, and this prevents the suspend/resume working
properly while the stream is running, since SST core code has the
check of the running streams and returns -EBUSY.  Drop these
superfluous flags for fixing the behavior.

Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE
definitions, which leads to the kernel Oops at suspend/resume like:

  BUG: scheduling while atomic: systemd-sleep/3144/0x00000003
  Call Trace:
   dump_stack+0x5c/0x7a
   __schedule_bug+0x55/0x70
   __schedule+0x63c/0x8c0
   schedule+0x3d/0x90
   schedule_timeout+0x16b/0x320
   ? del_timer_sync+0x50/0x50
   ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
   ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core]
   ? remove_wait_queue+0x60/0x60
   ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core]
   ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core]
   ....

This patch addresses these appropriately, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 7c5bb4ac ]

Clevo P650RS and other similar devices require i8042 to be reset in order
to detect Synaptics touchpad.
Reported-by: Paweł Bylica <chfast@gmail.com>
Tested-by: Ed Bordin <edbordin@gmail.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 117aceb0 ]

When committing era metadata to disk, it doesn't always save the latest
spacemap metadata root in superblock. Due to this, metadata is getting
corrupted sometimes when reopening the device. The correct order of update
should be, pre-commit (shadows spacemap root), save the spacemap root
(newly shadowed block) to in-core superblock and then the final commit.

Cc: stable@vger.kernel.org
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 7d1fedb6 ]

dm_btree_find_lowest_key() is giving incorrect results.  find_key()
traverses the btree correctly for finding the highest key, but there is
an error in the way it traverses the btree for retrieving the lowest
key.  dm_btree_find_lowest_key() fetches the first key of the rightmost
block of the btree instead of fetching the first key from the leftmost
block.

Fix this by conditionally passing the correct parameter to value64()
based on the @find_highest flag.

Cc: stable@vger.kernel.org
Signed-off-by: Erez Zadok <ezk@fsl.cs.sunysb.edu>
Signed-off-by: Vinothkumar Raja <vinraja@cs.stonybrook.edu>
Signed-off-by: Nidhi Panpalia <npanpalia@cs.stonybrook.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 68baf692 ]

Historically struct device_node references were tracked using a kref embedded as
a struct field. Commit 75b57ecf ("of: Make device nodes kobjects so they
show up in sysfs") (Mar 2014) refactored device_nodes to be kobjects such that
the device tree could by more simply exposed to userspace using sysfs.

Commit 0829f6d1 ("of: device_node kobject lifecycle fixes") (Mar 2014)
followed up these changes to better control the kobject lifecycle and in
particular the referecne counting via of_node_get(), of_node_put(), and
of_node_init().

A result of this second commit was that it introduced an of_node_put() call when
a dynamic node is detached, in of_node_remove(), that removes the initial kobj
reference created by of_node_init().

Traditionally as the original dynamic device node user the pseries code had
assumed responsibilty for releasing this final reference in its platform
specific DLPAR detach code.

This patch fixes a refcount underflow introduced by commit 0829f6d1, and
recently exposed by the upstreaming of the recount API.

Messages like the following are no longer seen in the kernel log with this
patch following DLPAR remove operations of cpus and pci devices.

  rpadlpar_io: slot PHB 72 removed
  refcount_t: underflow; use-after-free.
  ------------[ cut here ]------------
  WARNING: CPU: 5 PID: 3335 at lib/refcount.c:128 refcount_sub_and_test+0xf4/0x110

Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
[mpe: Make change log commit references more verbose]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 99e68909 ]

In mlx4_ib_add, procedure mlx4_ib_alloc_eqs is called to allocate EQs.

However, in the mlx4_ib_add error flow, procedure mlx4_ib_free_eqs is not
called to free the allocated EQs.

Fixes: e605b743 ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs")
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d594aa02 ]

The minimum size for a new stack (512 bytes) setup for arch/x86/boot components
when the bootloader does not setup/provide a stack for the early boot components
is not "enough".

The setup code executing as part of early kernel startup code, uses the stack
beyond 512 bytes and accidentally overwrites and corrupts part of the BSS
section. This is exposed mostly in the early video setup code, where
it was corrupting BSS variables like force_x, force_y, which in-turn affected
kernel parameters such as screen_info (screen_info.orig_video_cols) and
later caused an exception/panic in console_init().

Most recent boot loaders setup the stack for early boot components, so this
stack overwriting into BSS section issue has not been exposed.
Signed-off-by: Ashish Kalra <ashish@bluestacks.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170419152015.10011-1-ashishkalra@Ashishs-MacBook-Pro.localSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 78f7a45d ]

I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:

 ># cat snapshot
 # tracer: nop
 #
 #
 # * Snapshot is allocated *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

But instead it just showed an empty buffer:

 ># cat snapshot
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.

Cc: stable@vger.kernel.org
Fixes: 651e22f2 ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit fe8c470a ]

gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state()
is enterered at least once, so it assumes that cur_state might not get
initialized:

drivers/acpi/power.c: In function 'acpi_power_get_inferred_state':
drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This sets the variable to zero at the start of the loop, to ensure that
there is well-defined behavior even for an empty list. This gets rid of
the warning.

The warning first showed up when the -Os flag got removed in a bug fix
patch in linux-4.11-rc5.

I would suggest merging this addon patch on top of that bug fix to avoid
introducing a new warning in the stable kernels.

Fixes: 61b79e16 (ACPI: Fix incompatibility with mcount-based function graph tracing)
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit df62db5b ]

Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.

Also add a check of the return status of alloc_snapshot().

Cc: stable@vger.kernel.org
Fixes: 77fd5c15 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6fc091fb ]

Print correct command ring address using 'val_64'.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit a12b8ab8 ]

Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and
heap buffers.
Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 31c5d192 ]

This development kit has an FT4232 on it with a custom USB VID/PID.
The FT4232 provides four UARTs, but only two are used. The UART 0
is used by the FlashPro5 programmer and UART 2 is connected to the
SmartFusion2 CortexM3 SoC UART port.

Note that the USB VID is registered to Actel according to Linux USB
VID database, but that was acquired by Microsemi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit ea00353f ]

Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790)
crashes during suspend tests.  Geert Uytterhoeven managed to reproduce the
issue on an M2-W Koelsch board (r8a7791):

  It occurs when the PME scan runs, once per second.  During PME scan, the
  PCI host bridge (rcar-pci) registers are accessed while its module clock
  has already been disabled, leading to the crash.

One reproducer is to configure s2ram to use "s2idle" instead of "deep"
suspend:

  # echo 0 > /sys/module/printk/parameters/console_suspend
  # echo s2idle > /sys/power/mem_sleep
  # echo mem > /sys/power/state

Another reproducer is to write either "platform" or "processors" to
/sys/power/pm_test.  It does not (or is less likely) to happen during full
system suspend ("core" or "none") because system suspend also disables
timers, and thus the workqueue handling PME scans no longer runs.  Geert
believes the issue may still happen in the small window between disabling
module clocks and disabling timers:

  # echo 0 > /sys/module/printk/parameters/console_suspend
  # echo platform > /sys/power/pm_test    # Or "processors"
  # echo mem > /sys/power/state

(Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.)

Rafael Wysocki agrees that PME scans should be suspended before the host
bridge registers become inaccessible.  To that end, queue the task on a
workqueue that gets frozen before devices suspend.

Rafael notes however that as a result, some wakeup events may be missed if
they are delivered via PME from a device without working IRQ (which hence
must be polled) and occur after the workqueue has been frozen.  If that
turns out to be an issue in practice, it may be possible to solve it by
calling pci_pme_list_scan() once directly from one of the host bridge's
pm_ops callbacks.

Stacktrace for posterity:

  PM: Syncing filesystems ... [   38.566237] done.
  PM: Preparing system for sleep (mem)
  Freezing user space processes ... [   38.579813] (elapsed 0.001 seconds) done.
  Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  PM: Suspending system (mem)
  PM: suspend of devices complete after 152.456 msecs
  PM: late suspend of devices complete after 2.809 msecs
  PM: noirq suspend of devices complete after 29.863 msecs
  suspend debug: Waiting for 5 second(s).
  Unhandled fault: asynchronous external abort (0x1211) at 0x00000000
  pgd = c0003000
  [00000000] *pgd=80000040004003, *pmd=00000000
  Internal error: : 1211 [#1] SMP ARM
  Modules linked in:
  CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted
  4.9.0-rc1-koelsch-00011-g68db9bc8 #3383
  Hardware name: Generic R8A7791 (Flattened Device Tree)
  Workqueue: events pci_pme_list_scan
  task: eb56e140 task.stack: eb58e000
  PC is at pci_generic_config_read+0x64/0x6c
  LR is at rcar_pci_cfg_base+0x64/0x84
  pc : [<c041d7b4>]    lr : [<c04309a0>]    psr: 600d0093
  sp : eb58fe98  ip : c041d750  fp : 00000008
  r10: c0e2283c  r9 : 00000000  r8 : 600d0013
  r7 : 00000008  r6 : eb58fed6  r5 : 00000002  r4 : eb58feb4
  r3 : 00000000  r2 : 00000044  r1 : 00000008  r0 : 00000000
  Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
  Control: 30c5387d  Table: 6a9f6c80  DAC: 55555555
  Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210)
  Stack: (0xeb58fe98 to 0xeb590000)
  fe80:                                                       00000002 00000044
  fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000
  fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830
  fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc
  ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100
  ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000
  ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380
  ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000
  ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0
  ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000
  ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd
  [<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>]
  (pci_bus_read_config_word+0x58/0x80)
  [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>]
  (pci_check_pme_status+0x34/0x78)
  [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54)
  [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4)
  [<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>]
  (process_one_work+0x1bc/0x308)
  [<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0)
  [<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc)
  [<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c)
  Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000)
  ---[ end trace 667d43ba3aa9e589 ]---

Fixes: df17e62e ("PCI: Add support for polling PME state on suspended legacy PCI devices")
Reported-and-tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org	# 2.6.37+
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c90722b5 ]

Commit 43530b69 ("regulator: Use
regmap_read/write(), regmap_update_bits functions directly") intended
to replace working inline helper functions with standard regmap
calls.  However, it also inverted the set/clear logic of the "CORE ADJ
Allowed" bit.  That patch was clearly never tested, since without that
bit cleared, the core VDCDC1 voltage output does not react to I2C
configuration changes.

This patch fixes the issue by clearing the bit as in the original,
correct implementation.  Note for stable back porting that, due to
subsequent driver churn, this patch will not apply on every kernel
version.

Fixes: 43530b69 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly")
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit ee0fe833 ]

This code copies actual_length-128 bytes from the header, which will
underflow if the received buffer is too small.
Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c9f838d1 ]

This fixes CVE-2017-7472.

Running the following program as an unprivileged user exhausts kernel
memory by leaking thread keyrings:

	#include <keyutils.h>

	int main()
	{
		for (;;)
			keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING);
	}

Fix it by only creating a new thread keyring if there wasn't one before.
To make things more consistent, make install_thread_keyring_to_cred()
and install_process_keyring_to_cred() both return 0 if the corresponding
keyring is already present.

Fixes: d84f4f99 ("CRED: Inaugurate COW credentials")
Cc: stable@vger.kernel.org # 2.6.29+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c1644fe0 ]

This fixes CVE-2017-6951.

Userspace should not be able to do things with the "dead" key type as it
doesn't have some of the helper functions set upon it that the kernel
needs.  Attempting to use it may cause the kernel to crash.

Fix this by changing the name of the type to ".dead" so that it's rejected
up front on userspace syscalls by key_get_type_from_user().

Though this doesn't seem to affect recent kernels, it does affect older
ones, certainly those prior to:

	commit c06cfb08
	Author: David Howells <dhowells@redhat.com>
	Date:   Tue Sep 16 17:36:06 2014 +0100
	KEYS: Remove key_type::match in favour of overriding default by match_preparse

which went in before 3.18-rc1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit ee8f844e ]

This fixes CVE-2016-9604.

Keyrings whose name begin with a '.' are special internal keyrings and so
userspace isn't allowed to create keyrings by this name to prevent
shadowing.  However, the patch that added the guard didn't fix
KEYCTL_JOIN_SESSION_KEYRING.  Not only can that create dot-named keyrings,
it can also subscribe to them as a session keyring if they grant SEARCH
permission to the user.

This, for example, allows a root process to set .builtin_trusted_keys as
its session keyring, at which point it has full access because now the
possessor permissions are added.  This permits root to add extra public
keys, thereby bypassing module verification.

This also affects kexec and IMA.

This can be tested by (as root):

	keyctl session .builtin_trusted_keys
	keyctl add user a a @s
	keyctl list @s

which on my test box gives me:

	2 keys in keyring:
	180010936: ---lswrv     0     0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05
	801382539: --alswrv     0     0 user: a

Fix this by rejecting names beginning with a '.' in the keyctl.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
cc: linux-ima-devel@lists.sourceforge.net
cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9e1ba4f2 ]

If we set a kprobe on a 'stdu' instruction on powerpc64, we see a kernel
OOPS:

  Bad kernel stack pointer cd93c840 at c000000000009868
  Oops: Bad kernel stack pointer, sig: 6 [#1]
  ...
  GPR00: c000001fcd93cb30 00000000cd93c840 c0000000015c5e00 00000000cd93c840
  ...
  NIP [c000000000009868] resume_kernel+0x2c/0x58
  LR [c000000000006208] program_check_common+0x108/0x180

On a 64-bit system when the user probes on a 'stdu' instruction, the kernel does
not emulate actual store in emulate_step() because it may corrupt the exception
frame. So the kernel does the actual store operation in exception return code
i.e. resume_kernel().

resume_kernel() loads the saved stack pointer from memory using lwz, which only
loads the low 32-bits of the address, causing the kernel crash.

Fix this by loading the 64-bit value instead.

Fixes: be96f633 ("powerpc: Split out instruction analysis part of emulate_step()")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
[mpe: Change log massage, add stable tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 62a6cfdd ]

commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect
long after socket reconnect") added support for Negotiate requests to
be initiated by echo calls.

To avoid delays in calling echo after a reconnect, I added the patch
introduced by the commit b8c60012 ("Call echo service immediately
after socket reconnect").

This has however caused a regression with cifs shares which do not have
support for echo calls to trigger Negotiate requests. On connections
which need to call Negotiation, the echo calls trigger an error which
triggers a reconnect which in turn triggers another echo call. This
results in a loop which is only broken when an operation is performed on
the cifs share. For an idle share, it can DOS a server.

The patch uses the smb_operation can_echo() for cifs so that it is
called only if connection has been already been setup.

kernel bz: 194531
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 71d6ad08 ]

Don't assume that server is sane and won't return more data than
asked for.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d3df1ec0 ]

Remove ADC channels that are not available by default on the sama5d3_xplained
board (resistor not populated) in order to not create confusion.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <stable@vger.kernel.org> # 3.16+
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9cdd31e5 ]

The voltage reference for the ADC is not 3V but 3.3V since it is connected to
VDDANA.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <stable@vger.kernel.org> # 3.16+
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d72e9a7a ]

The copy_page is optimized memcpy for page-alinged address.  If it is
used with non-page aligned address, it can corrupt memory which means
system corruption.  With zram, it can happen with

1. 64K architecture
2. partial IO
3. slub debug

Partial IO need to allocate a page and zram allocates it via kmalloc.
With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
address.  And finally, copy_page(mem, cmem) corrupts memory.

So, this patch changes it to memcpy.

Actuaully, we don't need to change zram_bvec_write part because zsmalloc
returns page-aligned address in case of PAGE_SIZE class but it's not
good to rely on the internal of zsmalloc.

Note:
 When this patch is merged to stable, clear_page should be fixed, too.
 Unfortunately, recent zram removes it by "same page merge" feature so
 it's hard to backport this patch to -stable tree.

I will handle it when I receive the mail from stable tree maintainer to
merge this patch to backport.

Fixes: 42e99bd9 ("zram: optimize memory operations with clear_page()/copy_page()")
Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 4ca82dab ]

In zram_rw_page, the logic to get offset is wrong by operator precedence
(i.e., "<<" is higher than "&").  With wrong offset, zram can corrupt
the user's data.  This patch fixes it.

Fixes: 8c7f0102 ("zram: implement rw_page operation of zram")
Link: http://lkml.kernel.org/r/1492042622-12074-1-git-send-email-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 4e7655fd ]

The snd_use_lock_sync() (thus its implementation
snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of
the sync loop.  It was introduced from the beginning, just to be
"safer", in terms of avoiding the stupid bugs.

However, as Ben Hutchings suggested, this timeout rather introduces a
potential leak or use-after-free that was apparently fixed by the
commit 2d7d5400 ("ALSA: seq: Fix race during FIFO resize"):
for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() ->
copy_from_user() could block for a long time, and snd_use_lock_sync()
goes timeout and still leaves the cell at releasing the pool.

For fixing such a problem, we remove the break by the timeout while
still keeping the warning.
Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 162b270c ]

KGDB is a kernel debug stub and it can't be used to debug userland as it
can only safely access kernel memory.

On MIPS however KGDB has always got the register state of sleeping
processes from the userland register context at the beginning of the
kernel stack. This is meaningless for kernel threads (which never enter
userland), and for user threads it prevents the user seeing what it is
doing while in the kernel:

(gdb) info threads
  Id   Target Id         Frame
  ...
  3    Thread 2 (kthreadd) 0x0000000000000000 in ?? ()
  2    Thread 1 (init)   0x000000007705c4b4 in ?? ()
  1    Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201

Get the register state instead from the (partial) kernel register
context stored in the task's thread_struct for resume() to restore. All
threads now correctly appear to be in context_switch():

(gdb) info threads
  Id   Target Id         Frame
  ...
  3    Thread 2 (kthreadd) context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
  2    Thread 1 (init)   context_switch (rq=<optimized out>, cookie=..., next=<optimized out>, prev=0x0) at kernel/sched/core.c:2903
  1    Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201

Call clobbered registers which aren't saved and exception registers
(BadVAddr & Cause) which can't be easily determined without stack
unwinding are reported as 0. The PC is taken from the return address,
such that the state presented matches that found immediately after
returning from resume().

Fixes: 88547001 ("[MIPS] kgdb: add arch support for the kernel's kgdb core")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15829/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6bccc7f4 ]

In the PCI_MMAP_PROCFS case when the address being passed by the user is a
'user visible' resource address based on the bus window, and not the actual
contents of the resource, that's what we need to be checking it against.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c46f59e9 ]

arch_check_elf contains a usage of current_cpu_data that will call
smp_processor_id() with preemption enabled and therefore triggers a
"BUG: using smp_processor_id() in preemptible" warning when an fpxx
executable is loaded.

As a follow-up to commit b244614a ("MIPS: Avoid a BUG warning during
prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by
using raw_current_cpu_data instead. The rationale quoted from the previous
commit:

"It is assumed throughout the kernel that if any CPU has an FPU, then
all CPUs would have an FPU as well, so it is safe to perform the check
with preemption enabled - change the code to use raw_ variant of the
check to avoid the warning."

Fixes: 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks")
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com>
CC: <stable@vger.kernel.org> # 4.0+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15951/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit a8f60d1f ]

On heavy paging with KSM I see guest data corruption. Turns out that
KSM will add pages to its tree, where the mapping return true for
pte_unused (or might become as such later).  KSM will unmap such pages
and reinstantiate with different attributes (e.g. write protected or
special, e.g. in replace_page or write_protect_page)). This uncovered
a bug in our pagetable handling: We must remove the unused flag as
soon as an entry becomes present again.

Cc: stable@vger.kernel.org
Signed-of-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 77e6fe7f ]

Make sure to actually suspend the device before returning after a failed
(or deferred) probe.

Note that autosuspend must be disabled before runtime pm is disabled in
order to balance the usage count due to a negative autosuspend delay as
well as to make the final put suspend the device synchronously.

Fixes: 388bc262 ("omap-serial: Fix the error handling in the omap_serial probe")
Cc: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 099bd73d ]

An unbalanced and misplaced synchronous put was used to suspend the
device on driver unbind, something which with a likewise misplaced
pm_runtime_disable leads to external aborts when an open port is being
removed.

Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa024010
...
[<c046e760>] (serial_omap_set_mctrl) from [<c046a064>] (uart_update_mctrl+0x50/0x60)
[<c046a064>] (uart_update_mctrl) from [<c046a400>] (uart_shutdown+0xbc/0x138)
[<c046a400>] (uart_shutdown) from [<c046bd2c>] (uart_hangup+0x94/0x190)
[<c046bd2c>] (uart_hangup) from [<c045b760>] (__tty_hangup+0x404/0x41c)
[<c045b760>] (__tty_hangup) from [<c045b794>] (tty_vhangup+0x1c/0x20)
[<c045b794>] (tty_vhangup) from [<c046ccc8>] (uart_remove_one_port+0xec/0x260)
[<c046ccc8>] (uart_remove_one_port) from [<c046ef4c>] (serial_omap_remove+0x40/0x60)
[<c046ef4c>] (serial_omap_remove) from [<c04845e8>] (platform_drv_remove+0x34/0x4c)

Fix this up by resuming the device before deregistering the port and by
suspending and disabling runtime pm only after the port has been
removed.

Also make sure to disable autosuspend before disabling runtime pm so
that the usage count is balanced and device actually suspended before
returning.

Note that due to a negative autosuspend delay being set in probe, the
unbalanced put would actually suspend the device on first driver unbind,
while rebinding and again unbinding would result in a negative
power.usage_count.

Fixes: 7e9c8e7d ("serial: omap: make sure to suspend device before remove")
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 1fa839b4 ]

This fixes Continuous Availability when errors during
file reopen are encountered.

cifs_user_readv and cifs_user_writev would wait for ever if
results of cifs_reopen_file are not stored and for later inspection.

In fact, results are checked and, in case of errors, a chain
of function calls leading to reads and writes to be scheduled in
a separate thread is skipped.
These threads will wake up the corresponding waiters once reads
and writes are done.

However, given the return value is not stored, when rc is checked
for errors a previous one (always zero) is inspected instead.
This leads to pending reads/writes added to the list, making
cifs_user_readv and cifs_user_writev wait for ever.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit a0918f1c ]

STATUS_BAD_NETWORK_NAME can be received during node failover,
causing the flag to be set and making the reconnect thread
always unsuccessful, thereafter.

Once the only place where it is set is removed, the remaining
bits are rendered moot.

Removing it does not prevent "mount" from failing when a non
existent share is passed.

What happens when the share really ceases to exist while the
share is mounted is undefined now as much as it was before.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 53763668 ]

Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6fdc6dd9 ]

The vsyscall32 sysctl can racy against a concurrent fork when it switches
from disabled to enabled:

    arch_setup_additional_pages()
	if (vdso32_enabled)
           --> No mapping
                                        sysctl.vsysscall32()
                                          --> vdso32_enabled = true
    create_elf_tables()
      ARCH_DLINFO_IA32
        if (vdso32_enabled) {
           --> Add VDSO entry with NULL pointer

Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for
the newly forked process or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>