Remove unused get_name() function pointer from vport ops.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Geneve can benefit from GRO at the device level in a manner similar
to other tunnels, especially as hardware offloads are still emerging.

After this patch, aggregated frames are seen on the tunnel interface.
Single stream throughput nearly doubles in ideal circumstances (on
old hardware).
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an error occurs skipping IPv6 extension headers retain the already
parsed IP protocol and IPv6 addresses in the flow. Also assume that the
packet is not a fragment in the absence of information to the contrary;
that is always use the frag_off value set by ipv6_skip_exthdr().

This allows matching on the IP protocol and IPv6 addresses of packets
with malformed extension headers.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-08-28

One more bunch of Bluetooth patches for 4.3:

 - Crash fix for hci_bcm driver
 - Enhancements to hci_intel driver (e.g. baudrate configuration)
 - Fix for SCO link type after multiple connect attempts
 - Cleanups & minor fixes in a few other places

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Benc says:

====================
tunnels: fix incorrect IPv4/v6 headers interpretation

With tunneling, it is currently possible to get an IPv6 header and interpret
it as an IPv4 header, or to interpret an IPv6 address as an IPv4 address
(and vice versa). This leads to things like sending packets to incorrect
address, IPv6 flow label being interpreted as IP packet length, etc.

Fix several places where this can happen.

Most of this is net-next only. The third patch affects net, too, but it
doesn't seem there's anything in user space that sets the attribute at all
currently, thus net-next is fine.

Changelog:
v2: fixed geneve after incorrect rebase on top of Pravin's patches
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

By default (subject to the sysctl settings), IPv6 sockets listen also for
IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in
packets received through an IPv6 socket.

In addition, it's currently not possible to have both IPv4 and IPv6 vxlan
tunnel on the same port (unless bindv6only sysctl is enabled), as it's not
possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's
no way to specify both IPv4 and IPv6 remote/group IP addresses.

Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not
done globally in udp_tunnel, as l2tp and tipc seems to work okay when
receiving IPv4 packets on IPv6 socket and people may rely on this behavior.
The other tunnels (geneve and fou) do not support IPv6.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fou does not really support IPv6 encapsulation. After an UDP socket is
created in fou_create, the encap_rcv callback is set either to fou_udp_recv
or to gue_udp_recv. Both of those unconditionally assume that the received
packet has an IPv4 header and access the data at network_header as it was an
IPv4 header. This leads to IPv6 flow label being interpreted as IP packet
length, etc.

Disallow fou tunnel to be configured as IPv6 until real IPv6 support is
added to fou.

CC: Tom Herbert <tom@herbertland.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's currently nothing preventing directing packets with IPv6
encapsulation data to IPv4 tunnels (and vice versa). If this happens,
IPv6 addresses are incorrectly interpreted as IPv4 ones.

Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this
in ip_tunnel_info. Reject packets at appropriate places if they are supposed
to be encapsulated into an incompatible protocol.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mode field holds a single bit of information only (whether the
ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags.
This allows more mode flags to be added.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A few useful tracepoints developing VRF driver.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix build with !CONFIG_NF_CONNTRACK_MARK && CONFIG_OPENVSWITCH_CONNTRACK

Fixes: 182e3042 ("openvswitch: Allow matching on conntrack mark")
Reported-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Joe Stringer <joestringer@nicira.com>
Tested-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next tree.
In sum, patches to address fallout from the previous round plus updates from
the IPVS folks via Simon Horman, they are:

1) Add a new scheduler to IPVS: The weighted overflow scheduling algorithm
   directs network connections to the server with the highest weight that is
   currently available and overflows to the next when active connections exceed
   the node's weight. From Raducu Deaconu.

2) Fix locking ordering in IPVS, always take rtnl_lock in first place. Patch
   from Julian Anastasov.

3) Allow to indicate the MTU to the IPVS in-kernel state sync daemon. From
   Julian Anastasov.

4) Enhance multicast configuration for the IPVS state sync daemon. Also from
   Julian.

5) Resolve sparse warnings in the nf_dup modules.

6) Fix a linking problem when CONFIG_NF_DUP_IPV6 is not set.

7) Add ICMP codes 5 and 6 to IPv6 REJECT target, they are more informative
   subsets of code 1. From Andreas Herz.

8) Revert the jumpstack size calculation from mark_source_chains due to chain
   depth miscalculations, from Florian Westphal.

9) Calm down more sparse warning around the Netfilter tree, again from Florian
   Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
support for '%s' in bpf_trace_printk

v2->v3:
fix the comment to mention that strncpy_from_unsafe() returns
the length of the string including the trailing NUL.

v1->v2:
patch 1: generalize FETCH_FUNC_NAME(memory, string) into
strncpy_from_unsafe()
patch 2: use it in bpf_trace_printk
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

%s specifier makes bpf program and kernel debugging easier.
To make sure that trace_printk won't crash the unsafe string
is copied into stack and unsafe pointer is substituted.

The following C program:
 #include <linux/fs.h>
int foo(struct pt_regs *ctx, struct filename *filename)
{
  void *name = 0;

  bpf_probe_read(&name, sizeof(name), &filename->name);
  bpf_trace_printk("executed %s\n", name);
  return 0;
}

when attached to kprobe do_execve()
will produce output in /sys/kernel/debug/tracing/trace_pipe :
    make-13492 [002] d..1  3250.997277: : executed /bin/sh
      sh-13493 [004] d..1  3250.998716: : executed /usr/bin/gcc
     gcc-13494 [002] d..1  3250.999822: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/cc1
     gcc-13495 [002] d..1  3251.006731: : executed /usr/bin/as
     gcc-13496 [002] d..1  3251.011831: : executed /usr/lib/gcc/x86_64-linux-gnu/4.7/collect2
collect2-13497 [000] d..1  3251.012941: : executed /usr/bin/ld
Suggested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

generalize FETCH_FUNC_NAME(memory, string) into
strncpy_from_unsafe() and fix sparse warnings that were
present in original implementation.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure we catch future netpoll_send_udp users who use it without
disabling irqs and also as a hint for poll_controller users.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
Some phylib simplifications

   Here's 2 patches against DaveM's 'net-next.git' repo. We simplify a bogus
string of type casts in the 1st patch and make the code respect some coding
standards of the networking code in the 2nd one. I may follow with fixing of
checkpatch.pl's complaints. if I have time..
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix scripts/checkpatch.pl's messages like:

CHECK: Comparison to NULL could be written "!phydrv->read_mmd_indirect"

BTW, it doesn't detect the reversed comparisons (which I've fixed as well).
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get rid of the bogus string of type casts where ERR_PTR() is enough.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just some minor noise follow-up to address some stylistic issues of
commit 3b3ae880 ("net: sched: consolidate tc_classify{,_compat}").
Accidentally v1 instead of v2 of that commit got applied, so this
patch adds the relative diff.
Suggested-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, the driver would refuse to load if it couldn't secure
enough VIs from the MC to fulfill its RSS requirements.
This was causing probe to fail on later functions in
configurations where we'd run out of VIs, such as having many
VFs.

This change allows the driver to load with fewer VIs, down to a
minimum of 2. A warning will be printed saying that RSS
requirements were not met, possibly affecting performance.

efx->max_tx_channels needs to be set to avoid going down the
failure path in efx_probe_nic() immediately in the loop after the
probe() NIC-type function.
Also, Set rc=ENOSPC when bombing out of efx_probe_nic due to lack
of VIs.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Forcing uninitialized state allows us to upgrade and reinitialize
the adapter.

    FW_VERSION_T4 = 1.4.0.0
    FW_VERSION_T5 = 0.0.0.0
    FW_VERSION_T6 = 0.0.0.0
At this point driver supports above and greater than above version.

If FW in adapter < min FW_VERSION driver supports tries to upgrade the FW
If FW in adapter >= FW_VERSION driver supports then it follows normal path
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Antonio Quartulli says:

====================
Included changes:
- code beautification
- remove obsolete 'deleted' attribute for bat-gw node
- increase internal version number
- prevent potential access to netdev object after deregistration
- set needed_head/tail_room for batman virtual interface
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix typo in conntrack.c
s/CONFIG_NF_CONNTRACK_LABEL/CONFIG_NF_CONNTRACK_LABELS/
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: Refactor inetpeer cache and add support for VRFs

Per Dave's comment on the version 1 patch adding VRF support to inetpeer
cache by explicitly making the address + index a key. Refactored the
inetpeer code in the process; mostly impacts the use by tcp_metrics.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

inetpeer caches based on address only, so duplicate IP addresses within
a namespace return the same cached entry. Enhance the ipv4 address key
to contain both the IPv4 address and VRF device index.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the inetpeer_addr_base union to inetpeer_addr and drop
inetpeer_addr_base.

Both the a6 and in6_addr overlays are not needed; drop the __be32 version
and rename in6 to a6 for consistency with ipv4. Add a new u32 array to
the union which removes the need for the typecast in the compare function
and the use of a consistent arg for both ipv4 and ipv6 addresses which
makes the compare function more readable.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_metrics and inetpeer both have functions to compare inetpeer
addresses. Consolidate into 1 version.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use inetpeer set,get helpers in tcp_metrics rather than peeking into
the inetpeer_addr struct.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactors a common line into helper function.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The change to use a custom dst broke tcpdump captures on the VRF device:

$ tcpdump -n -i vrf10
...
05:32:29.009362 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 21989, seq 1, length 64
05:32:29.009855 00:00:40:01:8d:36 > 45:00:00:54:d6:6f, ethertype Unknown (0x0a02), length 84:
	0x0000:  0102 0a02 01fe 0000 9181 55e5 0001 bd11  ..........U.....
	0x0010:  da55 0000 0000 bb5d 0700 0000 0000 1011  .U.....]........
	0x0020:  1213 1415 1617 1819 1a1b 1c1d 1e1f 2021  ...............!
	0x0030:  2223 2425 2627 2829 2a2b 2c2d 2e2f 3031  "#$%&'()*+,-./01
	0x0040:  3233 3435 3637                           234567

Local packets going through the VRF device are missing an ethernet header.
Fix by adding one and then stripping it off before pushing back to the IP
stack. With this patch you get the expected dumps:

...
05:36:15.713944 IP 10.2.1.254 > 10.2.1.2: ICMP echo request, id 23795, seq 1, length 64
05:36:15.714160 IP 10.2.1.2 > 10.2.1.254: ICMP echo reply, id 23795, seq 1, length 64
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an interface isn't running napi_synchronize() will hang forever.

[  392.248403] rmmod           R  running task        0   359    343 0x00000000
[  392.257671]  ffff88003760fc88 ffff880037193b40 ffff880037193160 ffff88003760fc88
[  392.267644]  ffff880037610000 ffff88003760fcd8 0000000100014c22 ffffffff81f75c40
[  392.277524]  0000000000bc7010 ffff88003760fca8 ffffffff81796927 ffffffff81f75c40
[  392.287323] Call Trace:
[  392.291599]  [<ffffffff81796927>] schedule+0x37/0x90
[  392.298553]  [<ffffffff8179985b>] schedule_timeout+0x14b/0x280
[  392.306421]  [<ffffffff810f91b9>] ? irq_free_descs+0x69/0x80
[  392.314006]  [<ffffffff811084d0>] ? internal_add_timer+0xb0/0xb0
[  392.322125]  [<ffffffff81109d07>] msleep+0x37/0x50
[  392.329037]  [<ffffffffa00ec79a>] xennet_disconnect_backend.isra.24+0xda/0x390 [xen_netfront]
[  392.339658]  [<ffffffffa00ecadc>] xennet_remove+0x2c/0x80 [xen_netfront]
[  392.348516]  [<ffffffff81481c69>] xenbus_dev_remove+0x59/0xc0
[  392.356257]  [<ffffffff814e7217>] __device_release_driver+0x87/0x120
[  392.364645]  [<ffffffff814e7cf8>] driver_detach+0xb8/0xc0
[  392.371989]  [<ffffffff814e6e69>] bus_remove_driver+0x59/0xe0
[  392.379883]  [<ffffffff814e84f0>] driver_unregister+0x30/0x70
[  392.387495]  [<ffffffff814814b2>] xenbus_unregister_driver+0x12/0x20
[  392.395908]  [<ffffffffa00ed89b>] netif_exit+0x10/0x775 [xen_netfront]
[  392.404877]  [<ffffffff81124e08>] SyS_delete_module+0x1d8/0x230
[  392.412804]  [<ffffffff8179a8ee>] system_call_fastpath+0x12/0x71
Signed-off-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The range of addresses between 224.0.0.0 and 224.0.0.255 inclusive, is
reserved for the use of routing protocols and other low-level topology
discovery or maintenance protocols, such as gateway discovery and
group membership reporting.  Multicast routers should not forward any
multicast datagram with destination addresses in this range,
regardless of its TTL.

Currently, IGMP reports are generated for this reserved range of
addresses even though a router will ignore this information since it
has no purpose.  However, the presence of reserved group addresses in
an IGMP membership report uses up network bandwidth and can also
obscure addresses of interest when inspecting membership reports using
packet inspection or debug messages.

Although the RFCs for the various version of IGMP (e.g.RFC 3376 for
v3) do not specify that the reserved addresses be excluded from
membership reports, it should do no harm in doing so.  In particular
there should be no adverse effect in any IGMP snooping functionality
since 224.0.0.x is specifically excluded as per RFC 4541 (IGMP and MLD
Snooping Switches Considerations) section 2.1.2. Data Forwarding
Rules:

    2) Packets with a destination IP (DIP) address in the 224.0.0.X
       range which are not IGMP must be forwarded on all ports.

IGMP reports for local multicast groups can now be optionally
inhibited by means of a system control variable (by setting the value
to zero) e.g.:
    echo 0 > /proc/sys/net/ipv4/igmp_link_local_mcast_reports

To retain backwards compatibility the previous behaviour is retained
by default on system boot or reverted by setting the value back to
non-zero e.g.:
    echo 1 >  /proc/sys/net/ipv4/igmp_link_local_mcast_reports
Signed-off-by: Philip Downey <pdowney@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The multicast hardware counter on 8168/8111 chips is only 32 bit while the
statistics in struct rtnl_link_stats64 are 64 bit.  Given that statistics
are requested on an irregular basis, an overflow of the hardware counter
can go unnoticed.  To count even very large numbers of multicast packets
reliably, add a software counter and remove previously applied code to
fill the multicast field requested by @rtl8169_get_stats64 with the values
read from the rx_multicast hardware counter.
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If bcm_suspend is called whithout device opened there is a crash as
it tries to use bdev->hu which is NULL.
Rename bcm_device_list_lock to bcm_device_lock as it does not only apply
to bcm_device_list.
Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

bridge/netfilter/ebtables.c:290:26: warning: incorrect type in assignment (different modifiers)
-> remove __pure annotation.

ipv6/netfilter/ip6t_SYNPROXY.c:240:27: warning: cast from restricted __be16
-> switch ntohs to htons and vice versa.

netfilter/core.c:391:30: warning: symbol 'nfq_ct_nat_hook' was not declared. Should it be static?
-> delete it, got removed

net/netfilter/nf_synproxy_core.c:221:48: warning: cast to restricted __be32
-> Use __be32 instead of u32.

Tested with objdiff that these changes do not affect generated code.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This reverts commit 98d1bd80.

mark_source_chains will not re-visit chains, so

*filter
:INPUT ACCEPT [365:25776]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [217:45832]
:t1 - [0:0]
:t2 - [0:0]
:t3 - [0:0]
:t4 - [0:0]
-A t1 -i lo -j t2
-A t2 -i lo -j t3
-A t3 -i lo -j t4
# -A INPUT -j t4
# -A INPUT -j t3
# -A INPUT -j t2
-A INPUT -j t1
COMMIT

Will compute a chain depth of 2 if the comments are removed.
Revert back to counting the number of chains for the time being.
Reported-by: Cong Wang <cwang@twopensource.com>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Synchronous connections are initially created with type eSCO.
Link manager may reject proposed link parameters, which triggers
connection setup retry with a different set. Link type embedded
in responses should be disregarded until Synchronous Connect Complete
returns Success (0x00). Current code updates link type every time
which creates an issue when link type changes to SCO and back to eSCO
on further attepts.

Issue happens with BlackBerry 9100 and 9700 with Intel WilkinsPeak
on third connection setup attept

2015-05-18 01:27:57.332242 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
    handle 256 voice setting 0x0060 ptype 0x0380
2015-05-18 01:27:57.333604 > HCI Event: Command Status (0x0f) plen 4
    Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
2015-05-18 01:27:57.334614 > HCI Event: Synchronous Connect Complete (0x2c) plen 17
    status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO
    Error: Unsupported Remote Feature / Unsupported LMP Feature
2015-05-18 01:27:57.334895 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
    handle 256 voice setting 0x0060 ptype 0x0380
2015-05-18 01:27:57.335601 > HCI Event: Command Status (0x0f) plen 4
    Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
2015-05-18 01:27:57.336610 > HCI Event: Synchronous Connect Complete (0x2c) plen 17
    status 0x1a handle 0 bdaddr 30:7C:30:B3:A8:86 type SCO
    Error: Unsupported Remote Feature / Unsupported LMP Feature
2015-05-18 01:27:57.336685 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
    handle 256 voice setting 0x0060 ptype 0x03c8
2015-05-18 01:27:57.337603 > HCI Event: Command Status (0x0f) plen 4
    Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1
2015-05-18 01:27:57.342608 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 256 slots 1
2015-05-18 01:27:57.377631 > HCI Event: Synchronous Connect Complete (0x2c) plen 17
    status 0x00 handle 257 bdaddr 30:7C:30:B3:A8:86 type eSCO
    Air mode: CVSD
Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

A platform device can be used to provide some specific resources in
order to manage the controller. In this first patch we retrieve the
reset gpio which is used to power on/off the controller.

The main issue is to match the current tty with the correct pdev.
In case of ACPI, we can easily find the right tty/pdev pair because
they are both child of the same UART port.

If controller is powered-on from the driver, we need to wait for a
HCI boot event before being able to send any command.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The iBT 3.0 controllers need intel/ibt-11-5.sfi and intel/ibt-11-5.ddc
firmware files from linux-firmware repository.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>