This introduces HCI_QUIRK_BROKEN_LE_CODED which is used to indicate
that LE Coded PHY shall not be used, it is then set for some Intel
models that claim to support it but when used causes many problems.

Cc: stable@vger.kernel.org # 6.4.y+
Link: https://github.com/bluez/bluez/issues/577
Link: https://github.com/bluez/bluez/issues/582
Link: https://lore.kernel.org/linux-bluetooth/CABBYNZKco-v7wkjHHexxQbgwwSz-S=GZ=dZKbRE1qxT1h4fFbQ@mail.gmail.com/T/#
Fixes: 288c9022 ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Added support for the new command opcode FE0B
(HCI Intel PPAG Enable).

btmon log:
< HCI Command: Intel PPAG Enable (0x3f|0x020b) plen 4
        Enable: 0x00000002
> HCI Event: Command Complete (0x0e) plen 4
      Intel PPAG Enable (0x3f|0x020b) ncmd 1
        Status: Success (0x00)
Signed-off-by: Seema Sreemantha <seema.sreemantha@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

In the case of a Periodic Synchronized Receiver,
the PA report received from a Broadcaster contains the BASE,
which has information about codec and other parameters of a BIG.
This isnformation is stored and the application can retrieve it
using getsockopt(BT_ISO_BASE).
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Not calling hci_(dis)connect_cfm before deleting conn referred to by a
socket generally results to use-after-free.

When cleaning up SCO connections when the parent ACL is deleted too
early, use hci_conn_failed to do the connection cleanup properly.

We also need to clean up ISO connections in a similar situation when
connecting has started but LE Create CIS is not yet sent, so do it too
here.

Fixes: ca1fd42e ("Bluetooth: Fix potential double free caused by hci_conn_unlink")
Reported-by: syzbot+cf54c1da6574b6c1b049@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/00000000000013b93805fbbadc50@google.com/Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

There a few instances still using HCI_MAX_AD_LENGTH instead of using
max_adv_len which takes care of detecting what is the actual maximum
length depending on if the controller supports EA or not.

Fixes: 112b5090 ("Bluetooth: MGMT: Fix always using HCI_MAX_AD_LENGTH")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This commit implements defer setup support for the Broadcast Sink
scenario: By setting defer setup on a broadcast socket before calling
listen, the user is able to trigger the PA sync and BIG sync procedures
separately.

This is useful if the user first wants to synchronize to the periodic
advertising transmitted by a Broadcast Source, and trigger the BIG sync
procedure later on.

If defer setup is set, once a PA sync established event arrives, a new
hcon is created and notified to the ISO layer. A child socket associated
with the PA sync connection will be added to the accept queue of the
listening socket.

Once the accept call returns the fd for the PA sync child socket, the
user should call read on that fd. This will trigger the BIG create sync
procedure, and the PA sync socket will become a listening socket itself.

When the BIG sync established event is notified to the ISO layer, the
bis connections will be added to the accept queue of the PA sync parent.
The user should call accept on the PA sync socket to get the final bis
connections.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add support for the WCN7850 Bluetooth chipset.

Tested on the SM8550 QRD platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use switch/case to handle soc type specific behaviour,
the permit dropping the qca_is_xxx() inline functions
and make the code clearer and easier to update for new
SoCs.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Document the WCN7850 Bluetooth chipset.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This fixes sending BT_HCI_CMD_LE_CREATE_CONN_CANCEL when
hci_le_create_conn_sync has not been called because HCI_CONN_SCANNING
has been clear too early before its cmd_sync callback has been run.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use-after-free can occur in hci_disconnect_all_sync if a connection is
deleted by concurrent processing of a controller event.

To prevent this the code now tries to iterate over the list backwards
to ensure the links are cleanup before its parents, also it no longer
relies on a cursor, instead it always uses the last element since
hci_abort_conn_sync is guaranteed to call hci_conn_del.

UAF crash log:
==================================================================
BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124

CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G        W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
 <TASK>
 dump_stack_lvl+0x5b/0x90
 print_report+0xcf/0x670
 ? __virt_addr_valid+0xdd/0x160
 ? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 kasan_report+0xa6/0xe0
 ? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 ? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
 hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 ? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
 ? __pfx_lock_release+0x10/0x10
 ? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
 hci_cmd_sync_work+0x137/0x220 [bluetooth]
 process_one_work+0x526/0x9d0
 ? __pfx_process_one_work+0x10/0x10
 ? __pfx_do_raw_spin_lock+0x10/0x10
 ? mark_held_locks+0x1a/0x90
 worker_thread+0x92/0x630
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x196/0x1e0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2c/0x50
 </TASK>

Allocated by task 1782:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 __kasan_kmalloc+0x8f/0xa0
 hci_conn_add+0xa5/0xa80 [bluetooth]
 hci_bind_cis+0x881/0x9b0 [bluetooth]
 iso_connect_cis+0x121/0x520 [bluetooth]
 iso_sock_connect+0x3f6/0x790 [bluetooth]
 __sys_connect+0x109/0x130
 __x64_sys_connect+0x40/0x50
 do_syscall_64+0x60/0x90
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Freed by task 695:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 kasan_save_free_info+0x2b/0x50
 __kasan_slab_free+0x10a/0x180
 __kmem_cache_free+0x14d/0x2e0
 device_release+0x5d/0xf0
 kobject_put+0xdf/0x270
 hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
 hci_event_packet+0x579/0x7e0 [bluetooth]
 hci_rx_work+0x287/0xaa0 [bluetooth]
 process_one_work+0x526/0x9d0
 worker_thread+0x92/0x630
 kthread+0x196/0x1e0
 ret_from_fork+0x2c/0x50
==================================================================

Fixes: 182ee45d ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This improves the inband IR command handling for NXP BT chipsets.
When the IR vendor command is received, the driver injects a HW
error event, which causes a reset sequence in hci_error_reset().
The vendor IR command is sent to the controller while hci dev
is been closed, and FW is re-downloaded when nxp_setup() is
called during hci_dev_do_open().
The HCI_SETUP flag is set in nxp_hw_err() to make sure that
nxp_setup() is been called during hci_dev_do_open().

This also makes the nxp_setup() and power save functions more
generic.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds support for NXP IW624 chipset in btnxpuart driver
by adding FW name and bootloader signature. Based on the
loader version bits 7:6 of the bootloader signature, the
driver can choose between selecting secure and non-secure
FW files.
For cmd5 payload during FW download, this chip has addresses
of few registers offset by 1, so added boot_reg_offset to
handle the chip specific offset.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This removes the unnecessary check for CTS low after FW download.

After FW download is complete, the CTS line is already seen low.
It becomes high after 2 msec, and low again after FW initialization
is complete.
This makes the current check for CTS low redundant.

This removes the wait for CTS low section and increase delay to
1200msec instead, which is sufficiant for all NXP chipsets to
initialize FW.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR".  Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: FLorian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230823085632.116725-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Leon Romanovsky says:

====================
mlx5 MACsec RoCEv2 support

From Patrisious:

This series extends previously added MACsec offload support
to cover RoCE traffic either.

In order to achieve that, we need configure MACsec with offload between
the two endpoints, like below:

REMOTE_MAC=10:70:fd:43:71:c0

* ip addr add 1.1.1.1/16 dev eth2
* ip link set dev eth2 up
* ip link add link eth2 macsec0 type macsec encrypt on
* ip macsec offload macsec0 mac
* ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5
* ip addr add 10.1.0.1/16 dev macsec0
* ip link set dev macsec0 up

And in a similar manner on the other machine, while noting the keys order
would be reversed and the MAC address of the other machine.

RDMA traffic is separated through relevant GID entries and in case
of IP ambiguity issue - meaning we have a physical GIDs and a MACsec
GIDs with the same IP/GID, we disable our physical GID in order
to force the user to only use the MACsec GID.

v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/

* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion
  net/mlx5: Add RoCE MACsec steering infrastructure in core
  net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic
  net/mlx5: Configure MACsec steering for egress RoCEv2 traffic
  IB/core: Reorder GID delete code for RoCE
  net/mlx5: Add MACsec priorities in RDMA namespaces
  RDMA/mlx5: Implement MACsec gid addition and deletion
  net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering
  net/mlx5: Remove netdevice from MACsec steering
  net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core
  net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style
  net/mlx5: Remove dependency of macsec flow steering on ethernet
  net/mlx5e: Move MACsec flow steering operations to be used as core library
  macsec: add functions to get macsec real netdevice and check offload
====================

Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

It's somewhat unfortunate but with (my?) the current tooling
if people post new versions of a set in reply to an old version
managing the review queue gets difficult. So recommend against it.
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230823154922.1162644-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove the necessity to modify skb_ext_total_length() when new extension
types are added.
Also reduces the line count a bit.

With optimizations enabled the function is folded down to the same
constant value as before during compilation.
This has been validated on x86 with GCC 6.5.0 and 13.2.1.
Also a similar construct has been validated on godbolt.org with GCC 5.1.
In any case the compiler has to be able to evaluate the construct at
compile-time for the BUILD_BUG_ON() in skb_extensions_init().

Even if not evaluated at compile-time this function would only ever
be executed once at run-time, so the overhead would be very minuscule.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230823-skb_ext-simplify-v2-1-66e26cd66860@weissschuh.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

include/net/inet_sock.h
  f866fbc8 ("ipv4: fix data-races around inet->inet_id")
  c274af22 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/

Adjacent changes:

drivers/net/bonding/bond_alb.c
  e74216b8 ("bonding: fix macvlan over alb bond support")
  f11e5bd1 ("bonding: support balance-alb with openvswitch")

drivers/net/ethernet/broadcom/bgmac.c
  d6499f0b ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
  23a14488 ("net: bgmac: Fix return value check for fixed_phy_register()")

drivers/net/ethernet/broadcom/genet/bcmmii.c
  32bbe64a ("net: bcmgenet: Fix return value check for fixed_phy_register()")
  acf50d1a ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")

net/sctp/socket.c
  f866fbc8 ("ipv4: fix data-races around inet->inet_id")
  b09bde5c ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from wifi, can and netfilter.

  Fixes to fixes:

   - nf_tables:
       - GC transaction race with abort path
       - defer gc run if previous batch is still pending

  Previous releases - regressions:

   - ipv4: fix data-races around inet->inet_id

   - phy: fix deadlocking in phy_error() invocation

   - mdio: fix C45 read/write protocol

   - ipvlan: fix a reference count leak warning in ipvlan_ns_exit()

   - ice: fix NULL pointer deref during VF reset

   - i40e: fix potential NULL pointer dereferencing of pf->vf in
     i40e_sync_vsi_filters()

   - tg3: use slab_build_skb() when needed

   - mtk_eth_soc: fix NULL pointer on hw reset

  Previous releases - always broken:

   - core: validate veth and vxcan peer ifindexes

   - sched: fix a qdisc modification with ambiguous command request

   - devlink: add missing unregister linecard notification

   - wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning

   - batman:
      - do not get eth header before batadv_check_management_packet
      - fix batadv_v_ogm_aggr_send memory leak

   - bonding: fix macvlan over alb bond support

   - mlxsw: set time stamp fields also when its type is MIRROR_UTC"

* tag 'net-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
  selftests: bonding: add macvlan over bond testing
  selftest: bond: add new topo bond_topo_2d1c.sh
  bonding: fix macvlan over alb bond support
  rtnetlink: Reject negative ifindexes in RTM_NEWLINK
  netfilter: nf_tables: defer gc run if previous batch is still pending
  netfilter: nf_tables: fix out of memory error handling
  netfilter: nf_tables: use correct lock to protect gc_list
  netfilter: nf_tables: GC transaction race with abort path
  netfilter: nf_tables: flush pending destroy work before netlink notifier
  netfilter: nf_tables: validate all pending tables
  ibmveth: Use dcbf rather than dcbfl
  i40e: fix potential NULL pointer dereferencing of pf->vf i40e_sync_vsi_filters()
  net/sched: fix a qdisc modification with ambiguous command request
  igc: Fix the typo in the PTM Control macro
  batman-adv: Hold rtnl lock during MTU update via netlink
  igb: Avoid starting unnecessary workqueues
  can: raw: add missing refcount for memory leak fix
  can: isotp: fix support for transmission of SF without flow control
  bnx2x: new flag for track HW resource allocation
  sfc: allocate a big enough SKB for loopback selftest packet
  ...

Saeed Mahameed says:

====================
mlx5-updates-2023-08-22

1) Patches #1..#13 From Jiri:

The goal of this patchset is to make the SF code cleaner.

Benefit from previously introduced devlink_port struct containerization
to avoid unnecessary lookups in devlink port ops.

Also, benefit from the devlink locking changes and avoid unnecessary
reference counting.

2) Patches #14,#15:

Add ability to configure proto both UDP and TCP selectors in RX and TX
directions.

* tag 'mlx5-updates-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Support IPsec upper TCP protocol selector
  net/mlx5e: Support IPsec upper protocol selector field offload for RX
  net/mlx5: Store vport in struct mlx5_devlink_port and use it in port ops
  net/mlx5: Check vhca_resource_manager capability in each op and add extack msg
  net/mlx5: Relax mlx5_devlink_eswitch_get() return value checking
  net/mlx5: Return -EOPNOTSUPP in mlx5_devlink_port_fn_migratable_set() directly
  net/mlx5: Reduce number of vport lookups passing vport pointer instead of index
  net/mlx5: Embed struct devlink_port into driver structure
  net/mlx5: Don't register ops for non-PF/VF/SF port and avoid checks in ops
  net/mlx5: Remove no longer used mlx5_esw_offloads_sf_vport_enable/disable()
  net/mlx5: Introduce mlx5_eswitch_load/unload_sf_vport() and use it from SF code
  net/mlx5: Allow mlx5_esw_offloads_devlink_port_register() to register SFs
  net/mlx5: Push devlink port PF/VF init/cleanup calls out of devlink_port_register/unregister()
  net/mlx5: Push out SF devlink port init and cleanup code to separate helpers
  net/mlx5: Rework devlink port alloc/free into init/cleanup
====================

Link: https://lore.kernel.org/all/20230823051012.162483-1-saeed@kernel.org/Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
netfilter updates for net

This PR contains nf_tables updates for your *net* tree.

First patch fixes table validation, I broke this in 6.4 when tracking
validation state per table, reported by Pablo, fixup from myself.

Second patch makes sure objects waiting for memory release have been
released, this was broken in 6.1, patch from Pablo Neira Ayuso.

Patch three is a fix-for-fix from previous PR: In case a transaction
gets aborted, gc sequence counter needs to be incremented so pending
gc requests are invalidated, from Pablo.

Same for patch 4: gc list needs to use gc list lock, not destroy lock,
also from Pablo.

Patch 5 fixes a UaF in a set backend, but this should only occur when
failslab is enabled for GFP_KERNEL allocations, broken since feature
was added in 5.6, from myself.

Patch 6 fixes a double-free bug that was also added via previous PR:
We must not schedule gc work if the previous batch is still queued.

netfilter pull request 2023-08-23

* tag 'nf-23-08-23' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: defer gc run if previous batch is still pending
  netfilter: nf_tables: fix out of memory error handling
  netfilter: nf_tables: use correct lock to protect gc_list
  netfilter: nf_tables: GC transaction race with abort path
  netfilter: nf_tables: flush pending destroy work before netlink notifier
  netfilter: nf_tables: validate all pending tables
====================

Link: https://lore.kernel.org/r/20230823152711.15279-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Hangbin Liu says:

====================
fix macvlan over alb bond support

Currently, the macvlan over alb bond is broken after commit
14af9963 ("bonding: Support macvlans on top of tlb/rlb mode bonds").
Fix this and add relate tests.
====================

Link: https://lore.kernel.org/r/20230823071907.3027782-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add a macvlan over bonding test with mode active-backup, balance-tlb
and balance-alb.

]# ./bond_macvlan.sh
TEST: active-backup: IPv4: client->server                           [ OK ]
TEST: active-backup: IPv6: client->server                           [ OK ]
TEST: active-backup: IPv4: client->macvlan_1                        [ OK ]
TEST: active-backup: IPv6: client->macvlan_1                        [ OK ]
TEST: active-backup: IPv4: client->macvlan_2                        [ OK ]
TEST: active-backup: IPv6: client->macvlan_2                        [ OK ]
TEST: active-backup: IPv4: macvlan_1->macvlan_2                     [ OK ]
TEST: active-backup: IPv6: macvlan_1->macvlan_2                     [ OK ]
TEST: active-backup: IPv4: server->client                           [ OK ]
TEST: active-backup: IPv6: server->client                           [ OK ]
TEST: active-backup: IPv4: macvlan_1->client                        [ OK ]
TEST: active-backup: IPv6: macvlan_1->client                        [ OK ]
TEST: active-backup: IPv4: macvlan_2->client                        [ OK ]
TEST: active-backup: IPv6: macvlan_2->client                        [ OK ]
TEST: active-backup: IPv4: macvlan_2->macvlan_2                     [ OK ]
TEST: active-backup: IPv6: macvlan_2->macvlan_2                     [ OK ]
[...]
TEST: balance-alb: IPv4: client->server                             [ OK ]
TEST: balance-alb: IPv6: client->server                             [ OK ]
TEST: balance-alb: IPv4: client->macvlan_1                          [ OK ]
TEST: balance-alb: IPv6: client->macvlan_1                          [ OK ]
TEST: balance-alb: IPv4: client->macvlan_2                          [ OK ]
TEST: balance-alb: IPv6: client->macvlan_2                          [ OK ]
TEST: balance-alb: IPv4: macvlan_1->macvlan_2                       [ OK ]
TEST: balance-alb: IPv6: macvlan_1->macvlan_2                       [ OK ]
TEST: balance-alb: IPv4: server->client                             [ OK ]
TEST: balance-alb: IPv6: server->client                             [ OK ]
TEST: balance-alb: IPv4: macvlan_1->client                          [ OK ]
TEST: balance-alb: IPv6: macvlan_1->client                          [ OK ]
TEST: balance-alb: IPv4: macvlan_2->client                          [ OK ]
TEST: balance-alb: IPv6: macvlan_2->client                          [ OK ]
TEST: balance-alb: IPv4: macvlan_2->macvlan_2                       [ OK ]
TEST: balance-alb: IPv6: macvlan_2->macvlan_2                       [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The commit 14af9963 ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.

To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.

So let's just do a partial revert for commit 14af9963 in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.

Fixes: 14af9963 ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.

Fix by rejecting negative ifindexes.

[1]
WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593
[...]
Call Trace:
 <TASK>
 register_netdevice+0x69a/0x1490 net/core/dev.c:10081
 br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552
 rtnl_newlink_create net/core/rtnetlink.c:3471 [inline]
 __rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688
 rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701
 rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427
 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545
 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
 netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:728 [inline]
 sock_sendmsg+0xd9/0x180 net/socket.c:751
 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2538
 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2592
 __sys_sendmsg+0x117/0x1e0 net/socket.c:2621
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 38f7b870 ("[RTNETLINK]: Link creation API")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Daniel Golle says:

====================
net: ethernet: mtk_eth_soc: improve support for MT7988

This series fixes and completes commit 445eb644 ("net: ethernet:
mtk_eth_soc: add basic support for MT7988 SoC") and also adds support
for using the in-SoC SRAM to previous MT7986 and MT7981 SoCs.
====================

Link: https://lore.kernel.org/r/cover.1692721443.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Systems having 4 GiB of RAM and more require DMA addressing beyond the
current 32-bit limit. Starting from MT7988 the hardware now supports
36-bit DMA addressing, let's use that new capability in the driver to
avoid running into swiotlb on systems with 4 GiB of RAM or more.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/95b919c98876c9e49761e44662e7c937479eecb8.1692721443.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MT7981, MT7986 and MT7988 come with in-SoC SRAM dedicated for Ethernet
DMA rings. Support using the SRAM without breaking existing device tree
bindings, ie. only new SoC starting from MT7988 will have the SRAM
declared as additional resource in device tree. For MT7981 and MT7986
an offset on top of the main I/O base is used.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e45e0f230c63ad58869e8fe35b95a2fb8925b625.1692721443.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add bits needed to reset the frame engine on MT7988.

Fixes: 445eb644 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/89b6c38380e7a3800c1362aa7575600717bc7543.1692721443.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

More register macros need to be adjusted for the 3rd GMAC on MT7988.
Account for added bit in SYSCFG0_SGMII_MASK.

Fixes: 445eb644 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1c8da012e2ca80939906d85f314138c552139f0f.1692721443.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As we already added the exception tracing for XDP_TX, I think it is
necessary to add the exception tracing for other XDP actions, such
as XDP_REDIRECT, XDP_ABORTED and unknown error actions.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230822065255.606739-1-wei.fang@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the standard error pointer macro to shorten the code and simplify.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20230822021455.205101-2-liaoyu15@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ACPI fix from Rafael Wysocki:
 "Make an existing ACPI IRQ override quirk for PCSpecialist Elimina Pro
  16 M work as intended (Hans de Goede)"

* tag 'acpi-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Fix IRQ override quirk for PCSpecialist Elimina Pro 16 M

Merge tag 'platform-drivers-x86-v6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Final set of three small fixes for 6.5"

* tag 'platform-drivers-x86-v6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/mellanox: Fix mlxbf-tmfifo not handling all virtio CONSOLE notifications
  platform/x86: ideapad-laptop: Add support for new hotkeys found on ThinkBook 14s Yoga ITL
  platform/x86: lenovo-ymc: Add Lenovo Yoga 7 14ACN6 to ec_trigger_quirk_dmi_table

rshim console does not show all entries of dmesg.

Fixed by setting MLXBF_TM_TX_LWM_IRQ for every CONSOLE notification.
Signed-off-by: Shih-Yi Chen <shihyic@nvidia.com>
Reviewed-by: Liming Sung <limings@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20230821150627.26075-1-shihyic@nvidia.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Don't queue more gc work, else we may queue the same elements multiple
times.

If an element is flagged as dead, this can mean that either the previous
gc request was invalidated/discarded by a transaction or that the previous
request is still pending in the system work queue.

The latter will happen if the gc interval is set to a very low value,
e.g. 1ms, and system work queue is backlogged.

The sets refcount is 1 if no previous gc requeusts are queued, so add
a helper for this and skip gc run if old requests are pending.

Add a helper for this and skip the gc run in this case.

Fixes: f6c383b8 ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>

Several instances of pipapo_resize() don't propagate allocation failures,
this causes a crash when fault injection is enabled for gfp_kernel slabs.

Fixes: 3c4287f6 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>

Use nf_tables_gc_list_lock spinlock, not nf_tables_destroy_list_lock to
protect the gc list.

Fixes: 5f68718b ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>