use actual protocol family passed by user rather than hardcoded
AF_INTE6 to cerate sockets.
current code is not working for IPv4.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:
 "Fixes keep trickling in:

  1) Various IP fragmentation memory limit hardening changes from Eric
     Dumazet.

  2) Revert ipv6 metrics leak change, it causes more problems than it
     fixes for now.

  3) Fix WoL regression in stmmac driver, from Jose Abreu.

  4) Netlink socket spectre v1 gadget fix, from Jeremy Cline"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Revert "net/ipv6: fix metrics leak"
  rxrpc: Fix user call ID check in rxrpc_service_prealloc_one
  net: dsa: Do not suspend/resume closed slave_dev
  netlink: Fix spectre v1 gadget in netlink_create()
  Documentation: dpaa2: Use correct heading adornment
  net: stmmac: Fix WoL for PCI-based setups
  bonding: avoid lockdep confusion in bond_get_stats()
  enic: do not call enic_change_mtu in enic_probe
  ipv4: frags: handle possible skb truesize change
  inet: frag: enforce memory limits earlier
  net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
  net/mlx5e: Fix null pointer access when setting MTU of vport representor
  net/mlx5e: Set port trust mode to PCP as default
  net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager
  net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341
  brcmfmac: fix regression in parsing NVRAM for multiple devices
  iwlwifi: add more card IDs for 9000 series

Previously in squashfs_readpage() when copying data into the page
cache, it used the length of the datablock read from the filesystem
(after decompression).  However, if the filesystem has been corrupted
this data block may be short, which will leave pages unfilled.

The fix for this is to compute the expected number of bytes to copy
from the inode size, and use this to detect if the block is short.
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The squashfs fragment reading code doesn't actually verify that the
fragment is inside the fragment table.  The end result _is_ verified to
be inside the image when actually reading the fragment data, but before
that is done, we may end up taking a page fault because the fragment
table itself might not even exist.

Another report from Anatoly and his endless squashfs image fuzzing.
Reported-by: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Acked-by:: Phillip Lougher <phillip.lougher@gmail.com>,
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit df18b504.

This change causes other problems and use-after-free situations as
found by syzbot.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM fix from Russell King:
 "Just a single fix this time around for recent binutils causing build
  problems when generating Thumb-2 code"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+

Commit 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and
data segments") tried to initialize various left-over ad-hoc vma's
"properly", but actually made things worse for the temporary vma's used
for TLB flushing.

vma_init() doesn't actually initialize all of the vma, just a few
fields, so doing something like

   -       struct vm_area_struct vma = { .vm_mm = tlb->mm, };
   +       struct vm_area_struct vma;
   +
   +       vma_init(&vma, tlb->mm);

was actually very bad: instead of having a nicely initialized vma with
every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma
with only a couple of fields initialized.  And they weren't even fields
that the code in question mostly cared about.

The flush_tlb_range() function takes a "struct vma" rather than a
"struct mm_struct", because a few architectures actually care about what
kind of range it is - being able to only do an ITLB flush if it's a
range that doesn't have data accesses enabled, for example.  And all the
normal users already have the vma for doing the range invalidation.

But a few people want to call flush_tlb_range() with a range they just
made up, so they also end up using a made-up vma.  x86 just has a
special "flush_tlb_mm_range()" function for this, but other
architectures (arm and ia64) do the "use fake vma" thing instead, and
thus got caught up in the vma_init() changes.

At the same time, the TLB flushing code really doesn't care about most
other fields in the vma, so vma_init() is just unnecessary and
pointless.

This fixes things by having an explicit "this is just an initializer for
the TLB flush" initializer macro, which is used by the arm/arm64/ia64
people who mis-use this interface with just a dummy vma.

Fixes: 2c4541e2 ("mm: use vma_init() to initialize VMAs on stack and data segments")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted
that mmap_sem must be held when splitting an "anonymous" vma there.
Whether that's still strictly true nowadays is not entirely clear,
but the danger of sometimes crashing on the BUG is now fairly clear.

Even with the new stricter rules for anonymous vma marking, the
condition it checks for can possible trigger. Commit 44960f2a
("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem
pages") is good, and originally I thought it was safe from that
VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is
disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE)
insists on VM_SHARED.

But after I read John's earlier mail, drawing attention to the
vfs_fallocate() in there: I may be wrong, and I don't know if Android
has THP in the config anyway, but it looks to me like an
unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely
the VM_BUG_ON_VMA(), once it's vma_is_anonymous().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There just check the user call ID isn't already in use, hence should
compare user_call_ID with xcall->user_call_ID, which is current
node's user_call_ID.

Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fix from Ulf Hansson:
 "MMC host: mxcmmc: Fix build error for powerpc"

* tag 'mmc-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mxcmmc: Fix missing parentheses and brace

Pull power management fixes from Rafael Wysocki:
 "These fix the scope of a recent intel_pstate driver optimization used
  incorrectly on some systems due to processor identification ambiguity
  and fix a few issues in the turbostat utility, including three recent
  regressions.

  Specifics:

   - Use ACPI FADT preferred PM Profile to distinguish Skylake desktop
     processors from some server ones with the same model number in
     order to limit the scope of the recent IO-wait boost optimization
     to servers, as intended (Srinivas Pandruvada).

   - Fix several issues in the turbostat utility:
      * Fix the -S option on 1-CPU systems (Len Brown).
      * Fix computations using incorrect processor core counts (Artem
        Bityutskiy).
      * Fix the x2apic debug message (Len Brown).
      * Fix logical node enumeration to allow for non-sequential
        physical nodes (Prarit Bhargava).
      * Fix reported family on modern AMD processors (Calvin Walton).
      * Clarify the RAPL column information in the man page (Len Brown)"

* tag 'pm-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms
  tools/power turbostat: version 18.07.27
  tools/power turbostat: Read extended processor family from CPUID
  tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
  tools/power turbostat: fix x2apic debug message output file
  tools/power turbostat: fix bogus summary values
  tools/power turbostat: fix -S on UP systems
  tools/power turbostat: Update turbostat(8) RAPL throttling column description

Anatoly continues to find issues with fuzzed squashfs images.

This time, corrupt, missing, or undersized data for the page filling
wasn't checked for, because the squashfs_{copy,read}_cache() functions
did the squashfs_copy_data() call without checking the resulting data
size.

Which could result in the page cache pages being incompletely filled in,
and no error indication to the user space reading garbage data.

So make a helper function for the "fill in pages" case, because the
exact same incomplete sequence existed in two places.

[ I should have made a squashfs branch for these things, but I didn't
  intend to start doing them in the first place.

  My historical connection through cramfs is why I got into looking at
  these issues at all, and every time I (continue to) think it's a
  one-off.

  Because _this_ time is always the last time. Right?   - Linus ]
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Amit Pundir and Youling in parallel reported crashes with recent
mainline kernels running Android:

  F DEBUG   : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
  F DEBUG   : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key
  F DEBUG   : Revision: '0'
  F DEBUG   : ABI: 'arm'
  F DEBUG   : pid: 2261, tid: 2261, name: zygote  >>> zygote <<<
  F DEBUG   : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008
  ... <snip> ...
  F DEBUG   : backtrace:
  F DEBUG   :     #00 pc 00001c04  /system/lib/libc.so (memset+48)
  F DEBUG   :     #01 pc 0010c513  /system/lib/libart.so (create_mspace_with_base+82)
  F DEBUG   :     #02 pc 0015c601  /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40)
  F DEBUG   :     #03 pc 0015c3ed  /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string<char, std::__ 1::char_traits<char>, std::__1::allocator<char>> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36)
  ...

This was bisected back to commit bfd40eaf ("mm: fix
vma_is_anonymous() false-positives").

create_mspace_with_base() in the trace above, utilizes ashmem, and with
ashmem, for shared mappings we use shmem_zero_setup(), which sets the
vma->vm_ops to &shmem_vm_ops.  But for private ashmem mappings nothing
sets the vma->vm_ops.

Looking at the problematic patch, it seems to add a requirement that one
call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be
used.  Using the dummy_vm_ops seem to triggger SIGBUS when traversing
unmapped pages.

Thus, this patch adds a call to vma_set_anonymous() for ashmem private
mappings and seems to avoid the reported problem.

Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives")
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Colin Cross <ccross@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Reported-by: Youling 257 <youling257@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bfd40eaf ("mm: fix vma_is_anonymous() false-positives") made
newly allocated vma's have a dummy vm_ops field so that they wouldn't be
mistaken for anonymous mappings, and if you wanted an anonymous vma you
had to explicitly say so by calling "vma_set_anonymous()" on it.

However, it missed the two special vmas that ia64 processes have: the
register backing store and the NaT page.  So they wouldn't actually act
like anonymous ranges, and page faults on them caused a SIGBUS rather
than the creation of a new anon page in them.

That obviously will make any ia64 binary very unhappy indeed, and the
boot fails early.

Fixes: bfd40eaf ("mm: fix vma_is_anonymous() false-positives")
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 24462549 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

'protocol' is a user-controlled value, so sanitize it after the bounds
check to avoid using it for speculative out-of-bounds access to arrays
indexed by it.

This addresses the following accesses detected with the help of smatch:

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_keys' [w]

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_key_strings' [w]

* net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre
  issue 'nl_table' [w] (local cap)

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add overline heading adornment to document title in order to comply
with kernel doc requirements.

Fixes: 60b91319 staging: fsl-mc: Convert documentation to rst format
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

WoL won't work in PCI-based setups because we are not saving the PCI EP
state before entering suspend state and not allowing D3 wake.

Fix this by using a wrapper around stmmac_{suspend/resume} which
correctly sets the PCI EP state.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot found that the following sequence produces a LOCKDEP splat [1]

ip link add bond10 type bond
ip link add bond11 type bond
ip link set bond11 master bond10

To fix this, we can use the already provided nest_level.

This patch also provides correct nesting for dev->addr_list_lock

[1]
WARNING: possible recursive locking detected
4.18.0-rc6+ #167 Not tainted
--------------------------------------------
syz-executor751/4439 is trying to acquire lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

but task is already holding lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&bond->stats_lock)->rlock);
  lock(&(&bond->stats_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by syz-executor751/4439:
 #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215

stack backtrace:
CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
 check_deadlock kernel/locking/lockdep.c:1809 [inline]
 validate_chain kernel/locking/lockdep.c:2405 [inline]
 __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144
 spin_lock include/linux/spinlock.h:310 [inline]
 bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169
 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611
 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268
 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300
 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline]
 rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716
 notifier_call_chain+0x180/0x390 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
 call_netdevice_notifiers net/core/dev.c:1753 [inline]
 netdev_features_change net/core/dev.c:1321 [inline]
 netdev_change_features+0xb3/0x110 net/core/dev.c:7759
 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120
 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755
 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528
 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327
 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493
 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992
 sock_ioctl+0x30d/0x680 net/socket.c:1093
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440859
Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859
RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390
R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge turbostat utility fixes for final 4.18:

 - Fix the -S option on 1-CPU systems.
 - Fix computations using incorrect processor core counts.
 - Fix the x2apic debug message.
 - Fix logical node enumeration to allow for non-sequential physical nodes.
 - Fix reported family on modern AMD processors.
 - Clarify the RAPL column information in the man page.

* pm-tools:
  tools/power turbostat: version 18.07.27
  tools/power turbostat: Read extended processor family from CPUID
  tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes
  tools/power turbostat: fix x2apic debug message output file
  tools/power turbostat: fix bogus summary values
  tools/power turbostat: fix -S on UP systems
  tools/power turbostat: Update turbostat(8) RAPL throttling column description

In commit ab123fe0 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.

Fixes: ab123fe0 ("enic: handle mtu change for vf properly")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_frag_queue() might call pskb_pull() on one skb that
is already in the fragment queue.

We need to take care of possible truesize change, or we
might have an imbalance of the netns frags memory usage.

IPv6 is immune to this bug, because RFC5722, Section 4,
amended by Errata ID 3089 states :

  When reassembling an IPv6 datagram, if
  one or more its constituent fragments is determined to be an
  overlapping fragment, the entire datagram (and any constituent
  fragments) MUST be silently discarded.

Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently check current frags memory usage only when
a new frag queue is created. This allows attackers to first
consume the memory budget (default : 4 MB) creating thousands
of frag queues, then sending tiny skbs to exceed high_thresh
limit by 2 to 3 order of magnitude.

Note that before commit 648700f7 ("inet: frags: use rhashtables
for reassembly units"), work queue could be starved under DOS,
getting no cpu cycles.
After commit 648700f7, only the per frag queue timer can eventually
remove an incomplete frag queue and its skbs.

Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Oskolkov <posk@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-07-31

The following series includes four mlx5 fixes.

Please pull and let me know if there's any problem.

For -stable v4.14
net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager

For -stable v4.16
net/mlx5e: Set port trust mode to PCP as default

For -stable v4.17
net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull audit fix from Paul Moore:
 "A single small audit fix to guard against memory allocation failures
  when logging information about a kernel module load.

  It's small, easy to understand, and self-contained; while nothing is
  zero risk, this should be pretty low"

* tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: fix potential null dereference 'context->module.name'

After introduction of the cited commit, mlx5e_build_nic_params
receives the netdevice mtu in order to set the sw_mtu of mlx5e_params.
For enhanced IPoIB, the netdevice mtu is not set in this stage,
therefore, the initial sw_mtu equals zero. As a result, the hw_mtu
of the receive queue will be calculated incorrectly causing traffic
issues.

To fix this issue, query for port mtu before building the nic params.

Fixes: 472a1e44 ("net/mlx5e: Save MTU in channels params")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

MTU helper function is used by both conventional mlx5e
instances (PF/VF) and the eswitch representors. The representor
shouldn't change the nic vport context MTU, the VF is responsible for
that. Therefore set_mtu_cb has a null value when changing the
representor MTU.

Fixes: 250a42b6 ("net/mlx5e: Support configurable MTU for vport representors")
Signed-off-by: Adi Nissim <adin@mellanox.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The hairpin offload code has dependency on the trust mode being PCP.

Hence we should set PCP as the default for handling cases where we are
disallowed to read the trust mode from the FW, or failed to initialize it.

Fixes: 106be53b ('net/mlx5e: Set per priority hairpin pairs')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER
capabilities.
Do the same for mlx5_eswitch_cleanup().

Fixes: a9f7705f ("net/mlx5: Unify vport manager capability check")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Version 1 of the patch adding SERDES support to the 88E6141/6341
correctly added the ops to the 88E6141/6341. However, by the time
version 3 was committed, the ops had moved to the 88E6085/6175. Put
them back where they belong.

Fixes: 5bafeb6e ("net: dsa: mv88e6xxx: 88E6141/6341 SERDES support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2018-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.18

Last set of fixes before 4.18 is released

iwlwifi

* add new IDs for cards already available on the market

brcmfmac

* fix a regression introduced in v4.17
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "Nine fixes, five in the qla2xxx driver, the most serious of which is
  the uninitialized list head crash which can be observed in most
  systems under a sufficiently loaded low memory environment.

  The two sg fixes are minor but obvious and two target ones which seem
  reasonable but not high impact"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Return error when TMF returns
  scsi: qla2xxx: Fix ISP recovery on unload
  scsi: qla2xxx: Fix driver unload by shutting down chip
  scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion
  scsi: qla2xxx: Fix unintialized List head crash
  scsi: sg: update comment for blk_get_request()
  scsi: sg: fix minor memory leak in error path
  scsi: libiscsi: fix possible NULL pointer dereference in case of TMF
  scsi: target: iscsi: cxgbit: fix max iso npdu calculation

Pull virtio fixes from Michael Tsirkin:
 "Some bugfixes that seem important and safe enough to merge at the last
  minute"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: fix another race between migration and ballooning
  tools/virtio: add kmalloc_array stub
  tools/virtio: add dma barrier stubs

Pull ACPI fixes from Rafael Wysocki:
 "These fix a recent ACPICA regression affecting control method
  execution at the table level and an earlier hibernation regression in
  the ACPI driver for Intel SoCs (LPSS) that was missed by a previous
  fix in this cycle.

  Specifics:

   - Fix a recent ACPICA regression introduced by a previous fix that
     caused control method execution at the table level to be mishandled
     by mistake (Erik Schmauss).

   - Fix a hibernation regression from the 4.15 cycle in the ACPI driver
     for Intel SoCs (LPSS) that caused the platform firmware to be
     confused during resume from hibernation by the driver's PM quirks
     which was fixed for system-wide suspend/resume (ACPI S3) earlier in
     this cycle, but that previous fix missed the hibernation (ACPI S4)
     case (Rafael Wysocki)"

* tag 'acpi-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: AML Parser: ignore control method status in module-level code
  ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation

Dynamic boosting of HWP performance on IO wake showed significant
improvement to IO workloads. This series was intended for Skylake Xeon
platforms only and feature was enabled by default based on CPU model
number.

But some Xeon platforms reused the Skylake desktop CPU model number. This
caused some undesirable side effects to some graphics workloads. Since
they are heavily IO bound, the increase in CPU performance decreased the
power available for GPU to do its computing and hence decrease in graphics
benchmark performance.

For example on a Skylake desktop, GpuTest benchmark showed average FPS
reduction from 529 to 506.

This change makes sure that HWP boost feature is only enabled for Skylake
server platforms by using ACPI FADT preferred PM Profile. If some desktop
users wants to get benefit of boost, they can still enable boost from
intel_pstate sysfs attribute "hwp_dynamic_boost".

Fixes: 41ab43c9 (cpufreq: intel_pstate: enable boost for Skylake Xeon)
Link: https://bugs.freedesktop.org/show_bug.cgi?id=107410Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge a fix for hibernation regression in the ACPI driver for Intel
SoCs (LPSS).

* acpi-soc:
  ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation

Pull networking fixes from David Miller:
 "Several smallish fixes, I don't think any of this requires another -rc
  but I'll leave that up to you:

   1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
      Dumazet.

   2) Route leak in xfrm_lookup_route(), from Tommi Rantala.

   3) Premature poll() returns in AF_XDP, from Björn Töpel.

   4) devlink leak in netdevsim, from Jakub Kicinski.

   5) Don't BUG_ON in fib_compute_spec_dst, the condition can
      legitimately happen. From Lorenzo Bianconi.

   6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
      Cline.

   7) Don't allow user to bind to out of range multicast groups, from
      Dmitry Safonov with a follow-up by Dmitry Safonov.

   8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  netlink: Don't shift with UB on nlk->ngroups
  net/ipv6: fix metrics leak
  xen-netfront: wait xenbus state change when load module manually
  can: ems_usb: Fix memory leak on ems_usb_disconnect()
  openvswitch: meter: Fix setting meter id for new entries
  netlink: Do not subscribe to non-existent groups
  NET: stmmac: align DMA stuff to largest cache line length
  tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
  net: socket: Fix potential spectre v1 gadget in sock_is_registered
  net: socket: fix potential spectre v1 gadget in socketcall
  net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
  ipv4: remove BUG_ON() from fib_compute_spec_dst
  enic: handle mtu change for vf properly
  net: lan78xx: fix rx handling before first packet is send
  nfp: flower: fix port metadata conversion bug
  bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
  bpf: fix bpf_skb_load_bytes_relative pkt length check
  perf build: Build error in libbpf missing initialization
  net: ena: Fix use of uninitialized DMA address bits field
  bpf: btf: Use exact btf value_size match in map_check_btf()
  ...

Pull sparc fixes from David Miller:
 "Some small __init annotation and build fixes from Stephen Rostedt and
  Thomas Petazzoni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: use asm-generic version of msi.h
  sparc: move MSI related definitions to where they are used
  sparc/time: Add missing __init to init_tick_ops()

Anatoly reports another squashfs fuzzing issue, where the decompression
parameters themselves are in a compressed block.

This causes squashfs_read_data() to be called in order to read the
decompression options before the decompression stream having been set
up, making squashfs go sideways.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Acked-by: Phillip Lougher <phillip.lougher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The variable 'context->module.name' may be null pointer when
kmalloc return null, so it's better to check it before using
to avoid null dereference.
Another one more thing this patch does is using kstrdup instead
of (kmalloc + strcpy), and signal a lost record via audit_log_lost.

Cc: stable@vger.kernel.org # 4.11
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>