- 09 May, 2016 2 commits
-
-
Colin Ian King authored
klogctl can fail and return -ve len, so check for this and return NULL to avoid passing a (size_t)-1 to malloc. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
"data_split" was never set to false. It's just uninitialized. Fixes: 2950219d ('qede: Add basic network device support') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 07 May, 2016 3 commits
-
-
Dan Carpenter authored
The error handling is broken here. netxen_rom_fast_read() returns zero on success and -EIO on error. It never returns -1. Signed-off-by:
-
Dan Carpenter authored
My static checker complains that we are using "autoneg" without initializing it. The problem is the ->phy_read() condition is reversed so we only set this on error instead of success. Signed-off-by:
-
Dan Carpenter authored
My static checker complained that "v" can be used unintialized if netxen_rom_fast_read() returns -EIO. That function never actually returns -1. Signed-off-by:
-
- 06 May, 2016 10 commits
-
-
Ido Schimmel authored
When we fail to set the flooding configuration for the broadcast and unregistered multicast traffic, we should revert the flooding configuration of the unknown unicast traffic. Fixes: 0293038e ("mlxsw: spectrum: Add support for flood control") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Make the leave procedure in the error path symmetric to the join procedure and first remove the port from the collector before potentially destroying the LAG. Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by:
-
Jarno Rajahalme authored
UDP tunnel segmentation code relies on the inner offsets being set for an UDP tunnel GSO packet, but the inner *_complete() functions will set the inner offsets only if 'encapsulation' is set before calling them. Currently, udp_gro_complete() sets 'encapsulation' only after the inner *_complete() functions are done. This causes the inner offsets having invalid values after udp_gro_complete() returns, which in turn will make it impossible to properly segment the packet in case it needs to be forwarded, which would be visible to the user either as invalid packets being sent or as packet loss. This patch fixes this by setting skb's 'encapsulation' in udp_gro_complete() before calling into the inner complete functions, and by making each possible UDP tunnel gro_complete() callback set the inner_mac_header to the beginning of the tunnel payload. Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Reviewed-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Jarno Rajahalme authored
The setting of the UDP tunnel GSO type is already performed by udp[46]_gro_complete(). Signed-off-by:
-
Sudarsana Reddy Kalluru authored
qede requires qed to provide enough resources to accommodate 16 combined channels, but that upper-bound isn't actually being enforced by it. Instead, qed inform back to qede how many channels can be opened based on available resources - but that calculation doesn't really take into account the resources requested by qede; Instead it considers other FW/HW available resources. As a result, if a user would increase the number of channels to more than 16 [e.g., using ethtool] the chip would hang. This change increments the resources requested by qede to 64 combined channels instead of 16; This value is an upper bound on the possible available channels [due to other FW/HW resources]. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
David Ahern authored
Responses for packets to unused ports are getting lost with L3 domains. IPv4 has ip_send_unicast_reply for sending TCP responses which accounts for L3 domains; update the IPv6 counterpart tcp_v6_send_response. For icmp the L3 master check needs to be moved up in icmp6_send to properly respond to UDP packets to a port with no listener. Fixes: ca254490 ("net: Add VRF support to IPv6 stack") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Linus Lüssing authored
With the newly introduced helper functions the skb pulling is hidden in the checksumming function - and undone before returning to the caller. The IGMP and MLD query parsing functions in the bridge still assumed that the skb is pointing to the beginning of the IGMP/MLD message while it is now kept at the beginning of the IPv4/6 header. If there is a querier somewhere else, then this either causes the multicast snooping to stay disabled even though it could be enabled. Or, if we have the querier enabled too, then this can create unnecessary IGMP / MLD query messages on the link. Fixing this by taking the offset between IP and IGMP/MLD header into account, too. Fixes: 9afd85c9 ("net: Export IGMP/MLD message validation code") Reported-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
-
Nikolay Aleksandrov authored
get_bridge_ifindices() is used from the old "deviceless" bridge ioctl calls which aren't called with rtnl held. The comment above says that it is called with rtnl but that is not really the case. Here's a sample output from a test ASSERT_RTNL() which I put in get_bridge_ifindices and executed "brctl show": [ 957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30) [ 957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G W O 4.6.0-rc4+ #157 [ 957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 957.423009] 0000000000000000 ffff880058adfdf0 ffffffff8138dec5 0000000000000400 [ 957.423009] ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32 0000000000000001 [ 957.423009] 00007ffec1a444b0 0000000000000400 ffff880053c19130 0000000000008940 [ 957.423009] Call Trace: [ 957.423009] [<ffffffff8138dec5>] dump_stack+0x85/0xc0 [ 957.423009] [<ffffffffa05ead32>] br_ioctl_deviceless_stub+0x212/0x2e0 [bridge] [ 957.423009] [<ffffffff81515beb>] sock_ioctl+0x22b/0x290 [ 957.423009] [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700 [ 957.423009] [<ffffffff8126c159>] SyS_ioctl+0x79/0x90 [ 957.423009] [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1 Since it only reads bridge ifindices, we can use rcu to safely walk the net device list. Also remove the wrong rtnl comment above. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Ian Campbell authored
The peer may be expecting a reply having sent a request and then done a shutdown(SHUT_WR), so tearing down the whole socket at this point seems wrong and breaks for me with a client which does a SHUT_WR. Looking at other socket family's stream_recvmsg callbacks doing a shutdown here does not seem to be the norm and removing it does not seem to have had any adverse effects that I can see. I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact on the vmci transport. Signed-off-by:
Ian Campbell <ian.campbell@docker.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Daniel Jurgens authored
Use htons instead of unconditionally byte swapping nexthdr. On a little endian systems shifting the byte is correct behavior, but it results in incorrect csums on big endian architectures. Fixes: f8c6455b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Carol Soto <clsoto@us.ibm.com> Tested-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
- 04 May, 2016 8 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: 2 bug fixes. Fix crash on ppc64 due to missing memory barrier and restore multicast after reset. ==================== Signed-off-by: -
Michael Chan authored
The multicast/all-multicast internal flags are not properly restored after device reset. This could lead to unreliable multicast operations after an ethtool configuration change for example. Call bnxt_mc_list_updated() and setup the vnic->mask in bnxt_init_chip() to fix the issue. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
The code determines if the next ring entry is valid before proceeding further to read the rest of the entry. The CPU can re-order and read the rest of the entry first, possibly reading a stale entry, if DMA of a new entry happens right after reading it. This issue can be readily seen on a ppc64 system, causing it to crash. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2016-05-04 1) The flowcache can hit an OOM condition if too many entries are in the gc_list. Fix this by counting the entries in the gc_list and refuse new allocations if the value is too high. 2) The inner headers are invalid after a xfrm transformation, so reset the skb encapsulation field to ensure nobody tries access the inner headers. Otherwise tunnel devices stacked on top of xfrm may build the outer headers based on wrong informations. 3) Add pmtu handling to vti, we need it to report pmtu informations for local generated packets. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Kangjie Lu authored
The stack object “map” has a total size of 32 bytes. Its last 4 bytes are padding generated by compiler. These padding bytes are not initialized and sent out via “nla_put”. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
-
Kangjie Lu authored
The stack object “info” has a total size of 12 bytes. Its last byte is padding which is not initialized and leaked via “put_cmsg”. Signed-off-by:
-
Uwe Kleine-König authored
In the receive path a queue's work bit was cleared unconditionally even if fec_enet_rx_queue only read out a part of the available packets from the hardware. This resulted in not reading any packets in the next napi turn and so packets were delayed or lost. The obvious fix is to only clear a queue's bit when the queue was emptied. Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Tested-by:
Fugang Duan <fugang.duan@nxp.com> Acked-by:
-
Matthias Brugger authored
When probe bails out with an error, we try to unregister the netdev before we have even registered it. Fix the goto statements for that. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
- 03 May, 2016 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Some straggler bug fixes: 1) Batman-adv DAT must consider VLAN IDs when choosing candidate nodes, from Antonio Quartulli. 2) Fix botched reference counting of vlan objects and neigh nodes in batman-adv, from Sven Eckelmann. 3) netem can crash when it sees GSO packets, the fix is to segment then upon ->enqueue. Fix from Neil Horman with help from Eric Dumazet. 4) Fix VXLAN dependencies in mlx5 driver Kconfig, from Matthew Finlay. 5) Handle VXLAN ops outside of rcu lock, via a workqueue, in mlx5, since it can sleep. Fix also from Matthew Finlay. 6) Check mdiobus_scan() return values properly in pxa168_eth and macb drivers. From Sergei Shtylyov. 7) If the netdevice doesn't support checksumming, disable segmentation. From Alexandery Duyck. 8) Fix races between RDS tcp accept and sending, from Sowmini Varadhan. 9) In macb driver, probe MDIO bus before we register the netdev, otherwise we can try to open the device before it is really ready for that. Fix from Florian Fainelli. 10) Netlink attribute size for ILA "tunnels" not calculated properly, fix from Nicolas Dichtel" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6/ila: fix nlsize calculation for lwtunnel net: macb: Probe MDIO bus before registering netdev RDS: TCP: Synchronize accept() and connect() paths on t_conn_lock. RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock vxlan: Add checksum check to the features check function net: Disable segmentation if checksumming is not supported net: mvneta: Remove superfluous SMP function call macb: fix mdiobus_scan() error check pxa168_eth: fix mdiobus_scan() error check net/mlx5e: Use workqueue for vxlan ops net/mlx5e: Implement a mlx5e workqueue net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue net/mlx5: Unmap only the relevant IO memory mapping netem: Segment GSO packets on enqueue batman-adv: Fix reference counting of hardif_neigh_node object for neigh_node batman-adv: Fix reference counting of vlan object for tt_local_entry batman-adv: B.A.T.M.A.N V - make sure iface is reactivated upon NETDEV_UP event batman-adv: fix DAT candidate selection (must use vid) -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "Fix a regression and update the MAINTAINERS entry for fuse" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: update mailing list in MAINTAINERS fuse: Fix return value from fuse_get_user_pages()
-
Nicolas Dichtel authored
The handler 'ila_fill_encap_info' adds one attribute: ILA_ATTR_LOCATOR. Fixes: 65d7ab8d ("net: Identifier Locator Addressing module") CC: Tom Herbert <tom@herbertland.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Florian Fainelli authored
The current sequence makes us register for a network device prior to registering and probing the MDIO bus which could lead to some unwanted consequences, like a thread of execution calling into ndo_open before register_netdev() returns, while the MDIO bus is not ready yet. Rework the sequence to register for the MDIO bus, and therefore attach to a PHY prior to calling register_netdev(), which implies reworking the error path a bit. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: sychronization during connection startup This patch series ensures that the passive (accept) side of the TCP connection used for RDS-TCP is correctly synchronized with any concurrent active (connect) attempts for a given pair of peers. Patch 1 in the series makes sure that the t_sock in struct rds_tcp_connection is only reset after any threads in rds_tcp_xmit have completed (otherwise a null-ptr deref may be encountered). Patch 2 synchronizes rds_tcp_accept_one() with the rds_tcp*connect() path. v2: review comments from Santosh Shilimkar, other spelling corrections ==================== Signed-off-by: -
Sowmini Varadhan authored
An arbitration scheme for duelling SYNs is implemented as part of commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") which ensures that both nodes involved will arrive at the same arbitration decision. However, this needs to be synchronized with an outgoing SYN to be generated by rds_tcp_conn_connect(). This commit achieves the synchronization through the t_conn_lock mutex in struct rds_tcp_connection. The rds_conn_state is checked in rds_tcp_conn_connect() after acquiring the t_conn_lock mutex. A SYN is sent out only if the RDS connection is not already UP (an UP would indicate that rds_tcp_accept_one() has completed 3WH, so no SYN needs to be generated). Similarly, the rds_conn_state is checked in rds_tcp_accept_one() after acquiring the t_conn_lock mutex. The only acceptable states (to allow continuation of the arbitration logic) are UP (i.e., outgoing SYN was SYN-ACKed by peer after it sent us the SYN) or CONNECTING (we sent outgoing SYN before we saw incoming SYN). Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
There is a race condition between rds_send_xmit -> rds_tcp_xmit and the code that deals with resolution of duelling syns added by commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()"). Specifically, we may end up derefencing a null pointer in rds_send_xmit if we have the interleaving sequence: rds_tcp_accept_one rds_send_xmit conn is RDS_CONN_UP, so invoke rds_tcp_xmit tc = conn->c_transport_data rds_tcp_restore_callbacks /* reset t_sock */ null ptr deref from tc->t_sock The race condition can be avoided without adding the overhead of additional locking in the xmit path: have rds_tcp_accept_one wait for rds_tcp_xmit threads to complete before resetting callbacks. The synchronization can be done in the same manner as rds_conn_shutdown(). First set the rds_conn_state to something other than RDS_CONN_UP (so that new threads cannot get into rds_tcp_xmit()), then wait for RDS_IN_XMIT to be cleared in the conn->c_flags indicating that any threads in rds_tcp_xmit are done. Fixes: 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") Signed-off-by:
-
David S. Miller authored
Alexander Duyck says: ==================== Fixes for tunnel checksum and segmentation offloads This patch series is a subset of patches I had submitted for net-next. I plan to drop these two patches from the v3 of "Fix Tunnel features and enable GSO partial for several drivers" and I am instead submitting them for net since these are truly fixes and likely will need to be backported to stable branches. This series addresses 2 specific issues. The first is that we could request TSO on a v4 inner header while not supporting checksum offload of the outer IPv6 header. The second is that we could request an IPv6 inner checksum offload without validating that we could actually support an inner IPv6 checksum offload. ==================== Signed-off-by: -
Alexander Duyck authored
We need to perform an additional check on the inner headers to determine if we can offload the checksum for them. Previously this check didn't occur so we would generate an invalid frame in the case of an IPv6 header encapsulated inside of an IPv4 tunnel. To fix this I added a secondary check to vxlan_features_check so that we can verify that we can offload the inner checksum. Signed-off-by:
-
Alexander Duyck authored
In the case of the mlx4 and mlx5 driver they do not support IPv6 checksum offload for tunnels. With this being the case we should disable GSO in addition to the checksum offload features when we find that a device cannot perform a checksum on a given packet type. Signed-off-by:
-
Anna-Maria Gleixner authored
Since commit 3b9d6da6 ("cpu/hotplug: Fix rollback during error-out in __cpu_disable()") it is ensured that callbacks of CPU_ONLINE and CPU_DOWN_PREPARE are processed on the hotplugged CPU. Due to this SMP function calls are no longer required. Replace smp_call_function_single() with a direct call to mvneta_percpu_enable() or mvneta_percpu_disable(). The functions do not require to be called with interrupts disabled, therefore the smp_call_function_single() calling convention is not preserved. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: netdev@vger.kernel.org Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by:
-
Sergei Shtylyov authored
Now mdiobus_scan() returns ERR_PTR(-ENODEV) instead of NULL if the PHY device ID was read as all ones. As this was not an error before, this value should be filtered out now in this driver. Fixes: b74766a0 ("phylib: don't return NULL from get_phy_device()") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
-
Sergei Shtylyov authored
Since mdiobus_scan() returns either an error code or NULL on error, the driver should check for both, not only for NULL, otherwise a crash is imminent... Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: "Fixes for the HID subsystem: - regression fix for Wacom driver; commit introduced in 4.6-rc1 mistakenly removed line that should be kept. Fix by Ping Cheng - two device-specific quirks, by Ping Cheng and Nazar Mokrynskyi" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: add missed stylus_in_proximity line back HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk HID: wacom: Add support for DTK-1651 -
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One small bug fix for the imx6qp CAN clk definition that was causing failures and division by zeros in the kernel on those devices" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx6q: fix typo in CAN clock definition
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes for 4.6-rc This small series provides some bug fixes for mlx5 driver. A small bug fix for iounmap of a null pointer, which dumps a warning on some archs. One patch to fix the VXLAN/MLX5_EN dependency issue reported by Arnd. Two patches to fix the scheduling while atomic issue for ndo_add/del_vxlan_port NDOs. The first will add an internal mlx5e workqueue and the second will delegate vxlan ports add/del requests to that workqueue. Note: ('net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue') is only needed for net and not net-next as the issue was globally fixed for all device drivers by: b7aade15 ('vxlan: break dependency with netdev drivers') in net-next. Applied on top: f27337e1 ('ip_tunnel: fix preempt warning in ip tunnel creation/updating') ==================== Signed-off-by: -
Matthew Finlay authored
The vxlan add/delete port NDOs are called under rcu lock. The current mlx5e implementation can potentially block in these calls, which is not allowed. Move to using the mlx5e workqueue to handle these NDOs. Fixes: b3f63c3d ('net/mlx5e: Add netdev support for VXLAN tunneling') Signed-off-by:
Matthew Finlay <matt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
