- 15 Sep, 2021 40 commits
-
-
Ido Schimmel authored
After the previous patch, the switch driver is always initialized last, making this function redundant. Remove it. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Commit 961cf99a ("mlxsw: core: Re-order initialization sequence") changed the initialization sequence so that the switch driver (e.g., mlxsw_spectrum) is initialized before registration with the hwmon and thermal subsystems. This was done in order to avoid situations where hwmon/thermal code uses features not supported by current firmware version, which is only validated as part of switch driver initialization. Later, commit b79cb787 ("mlxsw: Move fw flashing code into core.c") moved firmware validation and flashing code from the switch driver to mlxsw_core so that it is performed before driver initialization. Therefore, change the initialization sequence back to its original form. In addition to being more straightforward, it will allow us to simplify parts of the code in subsequent patches and future patchsets. Signed-off-by:
-
David S. Miller authored
Leon Romanovsky says: ==================== devlink: Delete publish of single parameter API This short series removes the single parameter publish/unpublish API that does nothing expect mimics already existing devlink_paramss_*publish calls. In near future, we will be able to delete devlink_paramss_*publish too. ==================== Signed-off-by: -
Leon Romanovsky authored
There is no need in specific devlink_param_*publish(), because same output can be achieved by using devlink_params_*publish() in correct places. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
The devlink parameters were published in two steps despite being static and known in advance. First step was to use devlink_params_publish() which iterated over all known up to that point parameters and sent notification messages. In second step, the call was devlink_param_publish() that looped over same parameters list and sent notification for new parameters. In order to simplify the API, move devlink_params_publish() to be called when all parameters were already added and save the need to iterate over parameters list again. As a side effect, this change fixes the error unwind flow in which parameters were not marked as unpublished. Fixes: 82e6c96f ("net/mlx5: Register to devlink ingress VLAN filter trap") Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net: sched: update default qdisc visibility after Tx queue cnt changes Matthew noticed that number of children reported by mq does not match number of queues on reconfigured interfaces. For example if mq is instantiated when there is 8 queues it will always show 8 children, regardless of config being changed: # ethtool -L eth0 combined 8 # tc qdisc replace dev eth0 root handle 100: mq # tc qdisc show dev eth0 qdisc mq 100: root qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ... # ethtool -L eth0 combined 1 # tc qdisc show dev eth0 qdisc mq 100: root qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ... # ethtool -L eth0 combined 32 # tc qdisc show dev eth0 qdisc mq 100: root qdisc pfifo_fast 0: parent 100:8 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:7 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:6 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:5 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:4 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:3 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:2 bands 3 priomap 1 2 ... qdisc pfifo_fast 0: parent 100:1 bands 3 priomap 1 2 ... This patchset fixes this by hashing and unhasing the default child qdiscs as number of queues gets adjusted. ==================== Signed-off-by: -
Jakub Kicinski authored
Add a selftest for checking mq children are visible after ethtool -L. Signed-off-by:
-
Jakub Kicinski authored
For testing visibility of mq/mqprio default children. Signed-off-by:
-
Jakub Kicinski authored
mq / mqprio make the default child qdiscs visible. They only do so for the qdiscs which are within real_num_tx_queues when the device is registered. Depending on order of calls in the driver, or if user space changes config via ethtool -L the number of qdiscs visible under tc qdisc show will differ from the number of queues. This is confusing to users and potentially to system configuration scripts which try to make sure qdiscs have the right parameters. Add a new Qdisc_ops callback and make relevant qdiscs TTRT. Note that this uncovers the "shortcut" created by commit 1f27cde3 ("net: sched: use pfifo_fast for non real queues") The default child qdiscs beyond initial real_num_tx are always pfifo_fast, no matter what the sysfs setting is. Fixing this gets a little tricky because we'd need to keep a reference on whatever the default qdisc was at the time of creation. In practice this is likely an non-issue the qdiscs likely have to be configured to non-default settings, so whatever user space is doing such configuration can replace the pfifos... now that it will see them. Reported-by:
Matthew Massey <matthewmassey@fb.com> Reviewed-by:
Dave Taht <dave.taht@gmail.com> Signed-off-by:
-
David S. Miller authored
Sukadev Bhattiprolu says: ==================== ibmvnic: Reuse ltb, rx, tx pools It can take a long time to free and reallocate rx and tx pools and long term buffer (LTB) during each reset of the VNIC. This is specially true when the partition (LPAR) is heavily loaded and going through a Logical Partition Migration (LPM). The long drawn reset causes the LPAR to lose connectivity for extended periods of time and results in "RMC connection" errors and the LPM failing. What is worse is that during the LPM we could get a failover because of the lost connectivity. At that point, the vnic driver releases even the resources it has already allocated and starts over. As long as the resources we have already allocated are valid/applicable, we might as well hold on to them while trying to allocate the remaining resources. This patch set attempts to reuse the resources previously allocated as long as they are valid. It seems to vastly improve the time taken for the vnic reset and signficantly reduces the chances of getting the RMC connection errors. We do get still them occasionally, but appears to be for reasons other than memory allocation delays and those are still being investigated. If the backing devices for a vnic adapter are not "matched" (see "pool parameters" in patches 8 and 9) it is possible that we will still free all the resources and allocate them. If that becomes a common problem, we have to address it separately. Thanks to input and extensive testing from Brian King, Cris Forno, Dany Madden, Rick Lindsley. ==================== Signed-off-by: -
Sukadev Bhattiprolu authored
Rather than releasing the tx pools on every close and reallocating them on open, reuse the tx pools unless the pool parameters (number of pools, size of each pool or size of each buffer in a pool) have changed. If the pool parameters changed, then release the old pools (if any) and allocate new ones. Specifically release tx pools, if: - adapter is removed, - pool parameters change during reset, - we encounter an error when opening the adapter in response to a user request (in ibmvnic_open()). and don't release them: - in __ibmvnic_close() or - on errors in __ibmvnic_open() in the hope that we can reuse them during this or next reset. With these changes reset_tx_pools() can be dropped because its optimization is now included in init_tx_pools() itself. cleanup_tx_pools() releases all the skbs associated with the pool and is called from ibmvnic_cleanup(), which is called on every reset. Since we want to reuse skbs across resets, move cleanup_tx_pools() out of ibmvnic_cleanup() and call it only when user closes the adapter. Add two new adapter fields, ->prev_mtu, ->prev_tx_pool_size to track the previous values and use them to decide whether to reuse or realloc the pools. Reviewed-by:
Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by:
Dany Madden <drt@linux.ibm.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
Rather than releasing the rx pools on and reallocating them on every reset, reuse the rx pools unless the pool parameters (number of pools, size of each pool or size of each buffer in a pool) have changed. If the pool parameters changed, then release the old pools (if any) and allocate new ones. Specifically release rx pools, if: - adapter is removed, - pool parameters change during reset, - we encounter an error when opening the adapter in response to a user request (in ibmvnic_open()). and don't release them: - in __ibmvnic_close() or - on errors in __ibmvnic_open() in the hope that we can reuse them on the next reset. With these, reset_rx_pools() can be dropped because its optimzation is now included in init_rx_pools() itself. cleanup_rx_pools() releases all the skbs associated with the pool and is called from ibmvnic_cleanup(), which is called on every reset. Since we want to reuse skbs across resets, move cleanup_rx_pools() out of ibmvnic_cleanup() and call it only when user closes the adapter. Add two new adapter fields, ->prev_rx_buf_sz, ->prev_rx_pool_size to keep track of the previous values and use them to decide whether to reuse or realloc the pools. Reviewed-by:
-
Sukadev Bhattiprolu authored
Reuse the long term buffer during a reset as long as its size has not changed. If the size has changed, free it and allocate a new one of the appropriate size. When we do this, alloc_long_term_buff() and reset_long_term_buff() become identical. Drop reset_long_term_buff(). Reviewed-by:
-
Sukadev Bhattiprolu authored
In a follow-on patch, we will reuse long term buffers when possible. When doing so we have to be careful to properly assign map ids. We can no longer assign them sequentially because a lower map id may be available and we could wrap at 255 and collide with an in-use map id. Instead, use a bitmap to track active map ids and to find a free map id. Don't need to take locks here since the map_id only changes during reset and at that time only the reset worker thread should be using the adapter. Noticed this when analyzing an error Dany Madden ran into with the patch set. Reported-by:
-
Sukadev Bhattiprolu authored
In init_tx_pools() move some loop-invariant code out of the loop. Reviewed-by:
-
Sukadev Bhattiprolu authored
Use/rename local variables in init_tx_pools() for consistency with init_rx_pools() and for readability. Also add some comments Reviewed-by:
-
Sukadev Bhattiprolu authored
To make the code more readable, use/rename some local variables. Basically we have a set of pools, num_pools. Each pool has a set of buffers, pool_size and each buffer is of size buff_size. pool_size is a bit ambiguous (whether size in bytes or buffers). Add a comment in the header file to make it explicit. Reviewed-by:
-
Sukadev Bhattiprolu authored
Add/update some comments/function headers and fix up some messages. Reviewed-by:
-
Sukadev Bhattiprolu authored
For better readability, consolidate related code in replenish_rx_pool() and add some comments. Reviewed-by:
-
David S. Miller authored
Jonathan Lemon says: ==================== timecard updates for v13 firmware This update mainly deals with features for the TimeCard v13 firmware. The signals provided from the external SMA connectors can be steered to different locations, and the generated SMA signals can be chosen. Future timecard revisions will allow selectable I/O on any of the SMA connectors, so name the attributes appropriately, and set up the ABI in preparation for the new features. The update also adds support for IRIG-B and DCF formats, as well as NMEA output. A ts_window_adjust tunable is also provided to fine-tune the PHC:SYS time mapping. -- v1: Earlier reviewed series was for v10 firmware, this is expanded to include the v13 features. ==================== Signed-off-by: -
Jonathan Lemon authored
This patch describes the sysfs interface implemented by the ptp_ocp driver, under /sys/class/timecard. Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by:
-
Jonathan Lemon authored
The following process is used to read the PHC clock and correlate the reading with the "correct" system time. - get starting timestamp - issue PCI write command - issue PCI read command - get ending timestamp - read latched sec/nsec registers The write command is posted to PCI bus and returns. When the write arrives at the FPGA, the PHC time is latched into the sec/nsec registers, and a flag is set indicating the registers are valid. The read command returns this flag, and the time retrieval proceeds. Below is a non-scaled picture of the timing diagram involved. The PHC time corresponds to some SYS time between [start, end]. Userspace usually uses the midpoint between [start, end] to estimate the PCI delay and match this with the PHC time. [start] | | write |-------+ | | \ | read |----+ +----->| | \ * PHC time latched into register | \ | midpoint | +------->| | | | | | +----| | / | |<--------+ | [end] | | As the diagram indicates, the PHC time is latched before the midpoint, so the system clock time is slightly off the real PHC time. This shows up as a phase error with an oscilliscope. The workaround here is to provide a tunable which reduces (shrinks) the end time in the above diagram. This in turn moves the calculated midpoint so the system time and PHC time are in agreemment. Currently, the adjustment reduces the end time by 3/16th of the entire window. E.g.: [start, end] ==> [start, (end - (3/16 * end)], which produces reasonably good results. Also reduce delays by just writing to the clock control register instead of performing a read/modify/write sequence, as the contents of the control register are known. Signed-off-by: -
Jonathan Lemon authored
The current implementation of adjtime uses gettime/settime to perform nanosecond adjustments. This introduces addtional phase errors due to delays. Instead, use the FPGA's ability to just apply the nanosecond adjustment to the clock directly. Signed-off-by:
-
Jonathan Lemon authored
A 4th timestamper is added which timestamps the output of the PHC. The clock nanosecond offset is not always zero, so when compared to other timestampers, this provides precise measurements. Also, the timestamper interrupt from the PHC can be used to generate a PPS signal for /dev/pps. Also allow PTP_CLK_REQ_PEROUT requests for a 1PPS output, but do not actually configure any output pins, this is done via sysfs. Signed-off-by:
-
Jonathan Lemon authored
Upcoming boards may have a second GNSS receiver, getting information from a different constellation than the first receiver, which provides some measure of anti-spoofing. Expose the sysfs attribute for this device, if detected. Signed-off-by:
-
Jonathan Lemon authored
The timecard can provide a NMEA-1083 ZDA (time and date) output string on a serial port, which can be used to drive other devices. Add the NMEA resources, and the serial port as a sysfs attribute. Signed-off-by:
-
Jonathan Lemon authored
Provide a view into the timecard internals for debugging. Signed-off-by:
-
Jonathan Lemon authored
On startup, parts of the FPGA need to be initialized - break these out into their own functions, separate from the purely informational blocks. On startup, distrbute the UTC:TAI offset from the NMEA GNSS parser, if it is available. Signed-off-by:
-
Jonathan Lemon authored
IRIG and DCF output time in UTC, but the timecard operates on TAI internally. Add an attribute node which allows adding an offset to these modes before output. Signed-off-by:
-
Jonathan Lemon authored
IRIG-B has several different output formats, the timecard defaults to using B007. Add a control which selects different output modes. Signed-off-by:
-
Jonathan Lemon authored
IRIG (Inter-range Instrumentation Group) timecode format on one of the SMA output channels is provided by the IRIG master FPGA block. Enable the master when the IRIG output format is selected on either one of the output channels. By default, the output is in B007 format. DCF output format is provided by the DCF master block. Also enable the IRIG and DCF slaves, which parse an incoming signal from the external SMA connectors, and may be used to adjust the PHC. Signed-off-by:
-
Jonathan Lemon authored
The latest firmware for the TimeCard adds selectable signals for the SMA input/outputs. Add support for SMA selectors, and the GPIO controls needed for steering signals. Signed-off-by:
-
Jonathan Lemon authored
The firmware may provide a third signal timestamper, so make it available for use. Signed-off-by:
-
Jonathan Lemon authored
If a resource could not be registered, report the name of the resource and the error code. Signed-off-by:
-
Jonathan Lemon authored
The TimeCard exposes different resources, which may have their own irqs. Space for the irqs is allocated through a MSI or MSI-X interrupt vector. On some platforms, the interrupt allocation fails. Rather than making this fatal, just skip exposing those resources. The main timecard functionality (that of a PTP clock) will work without the additional resources. Signed-off-by:
-
Jonathan Lemon authored
If an I2C controller isn't present, don't try and read the I2C flash. Signed-off-by:
-
Jonathan Lemon authored
Only display the TOD information if there is a corresponding TOD resource. Signed-off-by:
-
Jonathan Lemon authored
Move the xilinx i2c driver parameters to the resource block instead of hardcoding things in the registration functions. Signed-off-by:
-
Aleksander Jan Bajkowski authored
The new added properties are used for configuring burst length. Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Aleksander Jan Bajkowski authored
Document the Lantiq Xway SoC series External Bus Unit (ETOP) bindings. Signed-off-by:
-
