The current code only increments the upper 64 bits of the SHA-512 byte
counter when the number of bytes hashed happens to hit 2^64 exactly.

This patch increments the upper 64 bits whenever the lower 64 bits
overflows.
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The default netlink message size limit might be exceeded when dumping a
lot of algorithms to userspace. As a result, not all of the instantiated
algorithms dumped to userspace. So calculate an upper bound on the message
size and call netlink_dump_start() with that value.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We lookup algorithms with crypto_alg_mod_lookup() when instantiating via
crypto_add_alg(). However, algorithms that are wrapped by an IV genearator
(e.g. aead or genicv type algorithms) need special care. The userspace
process hangs until it gets a timeout when we use crypto_alg_mod_lookup()
to lookup these algorithms. So export the lookup functions for these
algorithms and use them in crypto_add_alg().
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We use the active cpumask to determine the superset of cpus
to use for parallelization. However, the active cpumask is
for internal usage of the scheduler and therefore not the
appropriate cpumask for these purposes. So use the online
cpumask instead.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We don't remove the cpu that went offline from our cpumasks
on cpu hotplug. This got lost somewhere along the line, so
restore it. This fixes a hang of the padata instance on cpu
hotplug.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We use the active cpumask to determine the superset of cpus
to use for parallelization. However, the active cpumask is
for internal usage of the scheduler and therefore not the
appropriate cpumask for these purposes. So use the online
cpumask instead.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a reference to the padata api documentation at Documentation/padata.txt
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull crypto fixes from Herbert Xu:
 "This fixes a build problem where two crypto modules both try to export
  the same symbols (which shouldn't have been exported in the first
  place)."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: twofish-x86_64-3way - module init/exit functions should be static
  crypto: camellia-x86_64 - module init/exit functions should be static

Pull xen updates from Konrad Rzeszutek Wilk:
 "which has three neat features:

   - PV multiconsole support, so that there can be hvc1, hvc2, etc; This
     can be used in HVM and in PV mode.

   - P-state and C-state power management driver that uploads said power
     management data to the hypervisor.  It also inhibits cpufreq
     scaling drivers to load so that only the hypervisor can make power
     management decisions - fixing a weird perf bug.

     There is one thing in the Kconfig that you won't like: "default y
     if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it
     all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by
     default is off).  I've a fix to convert that boolean expression
     into "default m" which I am going to post after the cpufreq git
     pull - as the two patches to make this work depend on a fix in Dave
     Jones's tree.

   - Function Level Reset (FLR) support in the Xen PCI backend.

  Fixes:

   - Kconfig dependencies for Xen PV keyboard and video
   - Compile warnings and constify fixes
   - Change over to use percpu_xxx instead of this_cpu_xxx"

Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to
a removed commit.

* tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps
  xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.
  xen: constify all instances of "struct attribute_group"
  xen/xenbus: ignore console/0
  hvc_xen: introduce HVC_XEN_FRONTEND
  hvc_xen: implement multiconsole support
  hvc_xen: support PV on HVM consoles
  xenbus: don't free other end details too early
  xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
  xen/setup/pm/acpi: Remove the call to boot_option_idle_override.
  xenbus: address compiler warnings
  xen: use this_cpu_xxx replace percpu_xxx funcs
  xen/pciback: Support pci_reset_function, aka FLR or D3 support.
  pci: Introduce __pci_reset_function_locked to be used when holding device_lock.
  xen: Utilize the restore_msi_irqs hook.

Pull cleancache changes from Konrad Rzeszutek Wilk:
 "This has some patches for the cleancache API that should have been
  submitted a _long_ time ago.  They are basically cleanups:

   - rename of flush to invalidate

   - moving reporting of statistics into debugfs

   - use __read_mostly as necessary.

  Oh, and also the MAINTAINERS file change.  The files (except the
  MAINTAINERS file) have been in #linux-next for months now.  The late
  addition of MAINTAINERS file is a brain-fart on my side - didn't
  realize I needed that just until I was typing this up - and I based
  that patch on v3.3 - so the tree is on top of v3.3."

* tag 'stable/for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  MAINTAINERS: Adding cleancache API to the list.
  mm: cleancache: Use __read_mostly as appropiate.
  mm: cleancache: report statistics via debugfs instead of sysfs.
  mm: zcache/tmem/cleancache: s/flush/invalidate/
  mm: cleancache: s/flush/invalidate/

Pull blackfin updates from Bob Liu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (24 commits)
  blackfin: clean up string bfin_dma_5xx after rename.
  blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c
  bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file.
  Blackfin: s/#if CONFIG/#ifdef CONFIG/
  Blackfin: pnav: delete duplicate linux/export.h include
  bf561: add ppi DLEN macro for 10bits to 16bits
  arch: blackfin: udpate defconfig
  Disintegrate asm/system.h for Blackfin [ver #2]
  arch/blackfin: don't generate random mac in bfin_get_ether_addr()
  Blackfin: wire up new process_vm syscalls
  blackfin: cleanup anomaly workarounds
  blackfin: update default defconfig
  blackfin: thread_info: add suspend flag
  bfin: add bfin_ad73311_machine platform device
  blackfin: bf537: stamp: update board file for 193x
  blackfin: kgdb: skip hardware watchpoint test
  bf548: add ppi interrupt mask and blanking clocks
  blackfin: bf561: forgot CSYNC in get_core_lock_noflush
  spi/bfin_spi: drop bits_per_word from client data
  blackfin: cplb-mpu: fix page mask table overflow
  ...

Pull s390 patches from Martin Schwidefsky:
 "The biggest patch is the rework of the smp code, something I wanted to
  do for some time.  There are some patches for our various dump methods
  and one new thing: z/VM LGR detection.  LGR stands for linux-guest-
  relocation and is the guest migration feature of z/VM.  For debugging
  purposes we keep a log of the systems where a specific guest has lived."

Fix up trivial conflict in arch/s390/kernel/smp.c due to the scheduler
cleanup having removed some code next to removed s390 code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  [S390] kernel: Pass correct stack for smp_call_ipl_cpu()
  [S390] Ensure that vmcore_info pointer is never accessed directly
  [S390] dasd: prevent validate server for offline devices
  [S390] Remove monolithic build option for zcrypt driver.
  [S390] stack dump: fix indentation in output
  [S390] kernel: Add OS info memory interface
  [S390] Use block_sigmask()
  [S390] kernel: Add z/VM LGR detection
  [S390] irq: external interrupt code passing
  [S390] irq: set __ARCH_IRQ_EXIT_IRQS_DISABLED
  [S390] zfcpdump: Implement async sdias event processing
  [S390] Use copy_to_absolute_zero() instead of "stura/sturg"
  [S390] rework idle code
  [S390] rework smp code
  [S390] rename lowcore field
  [S390] Fix gcc 4.6.0 compile warning

avc_audit() did a lot of jumping around and had a big stack frame, all
for the uncommon case.

Split up the uncommon case (which we really can't make go fast anyway)
into its own slow function, and mark the conditional branches
appropriately for the common likely case.

This causes avc_audit() to no longer show up as one of the hottest
functions on the branch profiles (the new "perf -b" thing), and makes
the cycle profiles look really nice and dense too.

The whole audit path is still annoyingly very much one of the biggest
costs of name lookup, so these things are worth optimizing for.  I wish
we could just tell people to turn it off, but realistically we do need
it: we just need to make sure that the overhead of the necessary evil is
as low as possible.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While doing the fs/namei.c cleanups, I ran sparse on it, and it pointed
out other large integers and a couple of cases of us using '0' instead
of the proper 'NULL'.

Sparse still doesn't understand some of the conditional locking going
on, but that's no excuse for not fixing up the trivial stuff.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit commit 1de5b41c ("fs/namei.c: fix warnings on 32-bit")
Andrew said that there must be a tidier way of doing this.

This is that tidier way.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix kernel-doc warnings in fs/dcache.c:

  Warning(fs/dcache.c:1743): No description found for parameter 'seqp'
  Warning(fs/dcache.c:1743): Excess function parameter 'seq' description in '__d_lookup_rcu'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We want it to match what hash_name() is doing, which means extra
multiply by 9 in this case...
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull nouveau destaging + Kelper modesetting support from Dave Airlie:
 "This pull request is unexpected and not something I had mentioned
  previously.

  So NVIDIA announced new Kepler GPUs this morning, and Ben has killed
  himself getting modesetting support for them together to have on
  launch day.  Most of the code to support the new chips has already
  gone in, however this pull contains a few more pieces along with the
  final enables so the driver binds to the new Kepler cards.  Its quite
  amazing that nouveau can support a GPU on its launch day even if its
  just unaccelerated modesetting, and I'd like to have support in the
  next kernel.

  In order to sweeten the deal, Ben has also requested nouveau destage
  and become ABI stable, the only change is the version number bump
  which he prepared userspace for quite a long time ago.  The driver
  hasn't broken ABI since that one big break that caused a lot of fuss.

  It's also quite a small set of code, and not likely to break anything."

* 'drm-nouveau-destage' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/dp: support version 4.0 of DP table
  drm/nve0/disp: nvidia randomly decided to move the dithering method
  drm/nve0: initial modesetting support for kepler chipsets
  drm/nouveau: add bios connector type for dms59
  drm/nouveau: move out of staging drivers
  drm/nouveau: bump version to 1.0.0
  drm/nvd0/disp: ignore clock set if no pclk
  drm/nouveau: oops, increase channel dispc_vma to 4
  drm/nouveau: inform userspace of new kernel subchannel requirements
  drm/nouveau: remove m2mf creation on userspace channels
  drm/nvc0-/disp: reimplement flip completion method as fifo method
  drm/nouveau: move fence sequence check to start of loop
  drm/nouveau: remove subchannel names from places where it doesn't matter
  drm/nouveau/ttm: always do buffer moves on kernel channel

Pull radeon southern islands / trinity support from Dave Airlie:
 "This is support from AMD for their newest GPU and APUs.  The products
  called RadeonHD 7xxx, and the Trinity APU series.

  This did come in a bit late, due to some over-complicated AMD internal
  review process, which from the outside seems unnecessary once the
  company has decided it wants to support open source.  However as I
  said previously I'd rather not put the people who've got this hw for 3
  months now being forced to use fglrx on it if there is open code.

  Its pretty well self contained and just plugs into the driver in
  various places."

* 'drm-radeon-sitn-support' of git://people.freedesktop.org/~airlied/linux: (48 commits)
  drm/radeon/kms: update duallink checks for DCE6
  drm/radeon/kms: add trinity pci ids
  drm/radeon/kms: add radeon_asic struct for trinity
  drm/radeon/kms: add support for ucode loading on trinity (v2)
  drm/radeon/kms/vm: set vram base offset properly for TN
  drm/radeon/kms: Update evergreen functions for trinity
  drm/radeon/kms: cayman gpu init updates for trinity
  drm/radeon/kms: Add checks for TN in the DP bridge code
  drm/radeon/kms/DCE6.1: ss is not supported on the internal pplls
  drm/radeon/kms: disable PPLL0 on DCE6.1 when not in use
  drm/radeon/kms: Adjust pll picker for DCE6.1
  drm/radeon/kms: DCE6.1 disp eng pll updates
  drm/radeon/kms: DCE6.1 watermark updates for TN
  drm/radeon/kms: no support for internal thermal sensor on TN yet
  drm/radeon/kms: add trinity (TN) chip family
  drm/radeon/kms: Add SI pci ids
  drm/radeon: Update radeon_info_ioctl for SI. (v2)
  drm/radeon/kms: add radeon_asic struct for SI
  drm/radeon/kms: add support for compute rings in CS ioctl on SI
  drm/radeon/kms: fill in startup/shutdown callbacks for SI
  ...

Pull drm main changes from Dave Airlie:
 "This is the main drm pull request, I'm probably going to send two more
  smaller ones, will explain below.

  This contains a patch that is also in the fbdev tree, but it should be
  the same patch, it added an API for hot unplugging framebuffer
  devices, and I need that API for a new driver.

  It also contains some changes to the i2c tree which Jean has acked,
  and one change to moorestown platform stuff in x86.

  Highlights:
   - new drivers: UDL driver for USB displaylink devices, kms only,
     should support correct hotplug operations.
   - core: i2c speedups + better hotplug support, EDID overriding via
     firmware interface - allows user to load a firmware for a broken
     monitor/kvm from userspace, it even has documentation for it.
   - exynos: new HDMI audio + hdmi 1.4 + virtual output driver
   - gma500: code cleanup
   - radeon: cleanups, CS optimisations, streamout support and pageflip
     fix
   - nouveau: NVD9 displayport support + more reclocking work
   - i915: re-enabling GMBUS, finish gpu patch (might help hibernation
     who knows), missed irq fixes, stencil tiling fixes, interlaced
     support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB,
     semaphore fixes

  As well as the usual bunch of cleanups and fixes all over the place.

  I've got two things I'd like to merge a bit later:

   a) AMD support for all their new radeonhd 7000 series GPU and APUs.
      AMD dropped this a bit late due to insane internal review
      processes, (please AMD just follow Intel and let open source guys
      ship stuff early) however I don't want to penalise people who own
      this hardware (since its been on sale for 3-4 months and GPU hw
      doesn't exactly have a lifetime in years) and consign them to
      using closed drivers for longer than necessary.  The changes are
      well contained and just plug into the driver new gpu functionality
      so they should be fairly regression proof.  I just want to give
      them a bit of a run on the hw AMD kindly sent me.

   b) drm prime/dma-buf interface code.  This is just infrastructure
      code to expose the dma-buf stuff to drm drivers and to userspace.
      I'm not planning on pushing any driver support in this cycle
      (except maybe exynos), but I'd like to get the infrastructure code
      in so for the next cycle I can start getting the driver support
      into the individual drivers.  We have started driver support for
      i915, nouveau and udl along with I think exynos and omap in
      staging.  However this code relies on the dma-buf tree being
      pulled into your tree first since it needs the latest interfaces
      from that tree.  I'll push to get that tree sent asap.

  (oh and any warnings you see in i915 are gcc's fault from what anyone
  can see)."

Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new
msic_thermal_platform_data() thermal function being added next to the
tc35876x_platform_data() i2c device function..

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits)
  drm/i915: use DDC_ADDR instead of hard-coding it
  drm/radeon: use DDC_ADDR instead of hard-coding it
  drm: remove unneeded redefinition of DDC_ADDR
  drm/exynos: added virtual display driver.
  drm: allow loading an EDID as firmware to override broken monitor
  drm/exynos: enable hdmi audio feature
  drm/exynos: add default pixel format for plane
  drm/exynos: cleanup exynos_hdmi.h
  drm/exynos: add is_local member in exynos_drm_subdrv struct
  drm/exynos: add subdrv open/close functions
  drm/exynos: remove module of exynos drm subdrv
  drm/exynos: release pending pageflip events when closed
  drm/exynos: added new funtion to get/put dma address.
  drm/exynos: update gem and buffer framework.
  drm/exynos: added mode_fixup feature and code clean.
  drm/exynos: add HDMI version 1.4 support
  drm/exynos: remove exynos_mixer.h
  gma500: Fix mmap frambuffer
  drm/radeon: Drop radeon_gem_object_(un)pin.
  drm/radeon: Restrict offset for legacy display engine.
  ...

Pull updates of sound stuff from Takashi Iwai:
 "Here is the first big update chunk of sound stuff for 3.4-rc1.

  In the common sound infrastructure, there are a few changes for
  dynamic PCM support (used in ASoC) and a few clean-ups.  Majority of
  changes are found, as usual, in HD-audio and ASoC.

  Some highlights of HD-audio changes:

   - All the long-standing static quirk codes for Realtek codec were
     finally removed by fixing and extending the Realtek auto-parser.

   - The mute-LED control is standardized over all HD-audio codec
     drivers using the extended vmaster hook.

   - The vmaster slave mixer elements are initialized to 0dB as default
     so that the user won't be annoyed by the silent output after
     updates, e.g.  due to the additions of new elements.

   - Other many fix-ups for the misc HD-audio devices.

  In the ASoC side, this is a very active release, including a quite a
  few framework enhancements.  Some highlights:

   - Support for widgets not associated with a CODEC, an important part
     of the dynamic PCM framework.

   - A library factoring out the common code shared by dmaengine based
     DMA drivers contributed by Lars-Peter Clausen.  This will save a
     lot of code and make it much easier to deploy enhancements to
     dmaengine.

   - Support for binary controls, used for providing runtime
     configuration of algorithm coefficients.

   - A new DAPM widget type for regulator supplies allowing drivers for
     devices that can power down unused supplies while active to do
     without any per-driver code.

   - DAPM widgets for DAIs, initially giving a speed boost for playback
     startup and shutdown and also the basis for CODEC<->CODEC DAI link
     support.

   - Support for specifying the number of significant bits on audio
     interfaces, useful for allowing applications to know how much
     effort to put into generating data for a larger sample format.

   - Conversion of the FSI driver used on some SH processors to
     DMAEngine.

   - Conversion of EP93xx drivers to DMAEngine.

   - New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics
     WM2200.

   - Move audmux driver from arc/arm to sound/soc

   - McBSP move from arch/ to sound/ and updates

  Also, a few small updates and fixes for other drivers like au88x0,
  ymfpci, USB 6fire, USB usx2yaudio are included."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits)
  ASoC: wm8994: Provide VMID mode control and fix default sequence
  ASoC: wm8994: Add missing break in resume
  ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF
  ASoC: pxa-ssp: atomically set stream active masks
  ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master
  ASoC: Samsung: Added to support mono recording
  ALSA: hda - Fix build with CONFIG_PM=n
  ALSA: au88x0 - Avoid possible Oops at unbinding
  ALSA: usb-audio - Fix build error by consitification of rate list
  ASoC: core: Fix obscure leak of runtime array
  ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link()
  ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list
  ASoC: wm8996: Add 44.1kHz support
  ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE
  ASoC: mx27vis-aic32x4: Convert it to platform driver
  ALSA: hda - fix printing of high HDMI sample rates
  ALSA: ymfpci - Fix legacy registers on S3/S4 resume
  ALSA: control - Fixe a trailing white space error
  ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook()
  ALSA: hda - Add "Mute-LED Mode" enum control
  ...

SCSI updates from James Bottomley:
 "The update includes the usual assortment of driver updates (lpfc,
  qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge
  amount of infrastructure work in the SAS library and transport class
  as well as an iSCSI update.  There's also a new SCSI based virtio
  driver."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits)
  [SCSI] qla4xxx: Update driver version to 5.02.00-k15
  [SCSI] qla4xxx: trivial cleanup
  [SCSI] qla4xxx: Fix sparse warning
  [SCSI] qla4xxx: Add support for multiple session per host.
  [SCSI] qla4xxx: Export CHAP index as sysfs attribute
  [SCSI] scsi_transport: Export CHAP index as sysfs attribute
  [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry
  [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry
  [SCSI] pm8001: fix endian issue with code optimization.
  [SCSI] pm8001: Fix possible racing condition.
  [SCSI] pm8001: Fix bogus interrupt state flag issue.
  [SCSI] ipr: update PCI ID definitions for new adapters
  [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()
  [SCSI] isci: improvements in driver unloading routine
  [SCSI] isci: improve phy event warnings
  [SCSI] isci: debug, provide state-enum-to-string conversions
  [SCSI] scsi_transport_sas: 'enable' phys on reset
  [SCSI] libsas: don't recover end devices attached to disabled phys
  [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
  [SCSI] libsas: set attached device type and target protocols for local phys
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "This contains the usual set of updates and bugfixes to target-core +
  existing fabric module code, along with a handful of the patches
  destined for v3.3 stable.

  It also contains the necessary target-core infrastructure pieces
  required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre
  Channel fabric module currently queued in target-pending/for-next-merge,
  and coming for round 2.

  The highlights for this series include:

   - Add target_submit_tmr() helper function for fabric task management
     (andy)
   - Convert tcm_fc to use target_submit_tmr() (andy)
   - Replace target core various cmd flags with a transport state (hch)
   - Convert loopback to use workqueue submission (hch)
   - Convert target core to use array_zalloc for tpg_lun_list (joern)
   - Convert target core to use array_zalloc for device_list (joern)
   - Add target core support for TMR_ABORT_TASK (nab)
   - Add target core se_sess->sess_kref + get/put helpers (nab)
   - Add target core se_node_acl->acl_kref for ->acl_free_comp usage
     (nab)
   - Convert iscsi-target to use target_put_session + sess_kref (nab)
   - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab)
   - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on
     exception (nab)
   - Fix target core up handling of short INQUIRY buffers (roland)
   - Untangle target-core front-end and back-end meanings of max_sectors
     attribute (roland)
   - Set loopback residual field for SCSI commands (roland)
   - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS
     emulation (roland)

  Thanks again to Andy, Christoph, Joern, Roland, and everyone who has
  contributed this round!"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits)
  ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception
  loopback: Fix transport_generic_allocate_tasks error handling
  iscsi-target: remove improper externs
  iscsi-target: Remove unused variables in iscsi_target_parameters.c
  target: remove obvious warnings
  target: Use array_zalloc for device_list
  target: Use array_zalloc for tpg_lun_list
  target: Fix sense code for unsupported SERVICE ACTION IN
  target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled
  target: Bump core version to v4.1.0-rc2-ml + fabric versions
  tcm_fc: Fix fc_exch memory leak in ft_send_resp_status
  target: Drop unused legacy target_core_fabric_ops API callers
  iscsi-target: Convert to use target_put_session + sess_kref
  target: Convert se_node_acl->acl_group removal to use ->acl_kref
  target: Add se_node_acl->acl_kref for ->acl_free_comp usage
  target: Add se_node_acl->acl_free_comp for NodeACL release path
  target: Add se_sess->sess_kref + get/put helpers
  target: Convert session_lock to irqsave
  target: Fix typo in drivers/target
  iscsi-target: Fix dynamic -> explict NodeACL pointer reference
  ...

Pull md updates for 3.4 from Neil Brown:
 "Mostly tidying up code in preparation for some bigger changes next
  time.

  A few bug fixes tagged for -stable.

  Main functionality change is that some RAID10 arrays can now grow to
  use extra space that may have been made available on the individual
  devices."

Fixed up trivial conflicts with the k[un]map_atomic() cleanups in
drivers/md/bitmap.c.

* tag 'md-3.4' of git://neil.brown.name/md: (22 commits)
  md: Add judgement bb->unacked_exist in function md_ack_all_badblocks().
  md: fix clearing of the 'changed' flags for the bad blocks list.
  md/bitmap: discard CHUNK_BLOCK_SHIFT macro
  md/bitmap: remove unnecessary indirection when allocating.
  md/bitmap: remove some pointless locking.
  md/bitmap: change a 'goto' to a normal 'if' construct.
  md/bitmap: move printing of bitmap status to bitmap.c
  md/bitmap: remove some unused noise from bitmap.h
  md/raid10 - support resizing some RAID10 arrays.
  md/raid1: handle merge_bvec_fn in member devices.
  md/raid10: handle merge_bvec_fn in member devices.
  md: add proper merge_bvec handling to RAID0 and Linear.
  md: tidy up rdev_for_each usage.
  md/raid1,raid10: avoid deadlock during resync/recovery.
  md/bitmap: ensure to load bitmap when creating via sysfs.
  md: don't set md arrays to readonly on shutdown.
  md: allow re-add to failed arrays.
  md/raid5: use atomic_dec_return() instead of atomic_dec() and atomic_read().
  md: Use existed macros instead of numbers
  md/raid5: removed unused 'added_devices' variable.
  ...

Pull x86 "urgent" leftovers from Ingo Molnar:
 "Pending x86/urgent bits that were not high prio enough to warrant
  -rc-less v3.3-final inclusion."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Fix pointer math issue in handle_ramdisks()
  x86/ioapic: Add register level checks to detect bogus io-apic entries
  x86, mce: Fix rcu splat in drain_mce_log_buffer()
  x86, memblock: Move mem_hole_size() to .init

Pull x86 platform changes from Ingo Molnar.

Removes the Moorestown platform that nobody ever used.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform: Move APIC ID validity check into platform APIC code
  x86/olpc/xo15/sci: Enable lid close wakeup control
  x86/geode/net5501: Add platform driver for Soekris Engineering net5501
  x86/geode/alix2: Supplement driver to include GPIO button support
  x86/mid/powerbtn: Use MSIC read/write instead of ipc_scu
  x86/mid/thermal: Turn off thermistor
  x86/mid/thermal: Add msic_thermal alias
  x86/mid/thermal: Convert to use Intel MSIC API
  x86/mid/scu_ipc: Remove Moorestown support
  x86/mid: Kill off Moorestown
  x86/mrst: Add msic_thermal platform support
  x86/config: Select MSIC MFD driver on Intel Medfield platform
  x86/mid: Remove Intel Moorestown
  x86/mrst: Set ISA bus type for fake MP IRQs
  x86/ioapic: Use legacy_pic to set correct gsi-irq mapping

Pull MCE changes from Ingo Molnar.

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix return value of mce_chrdev_read() when erst is disabled
  x86/mce: Convert static array of pointers to per-cpu variables
  x86/mce: Replace hard coded hex constants with symbolic defines
  x86/mce: Recognise machine check bank signature for data path error
  x86/mce: Handle "action required" errors
  x86/mce: Add mechanism to safely save information in MCE handler
  x86/mce: Create helper function to save addr/misc when needed
  HWPOISON: Add code to handle "action required" errors.
  HWPOISON: Clean up memory_failure() vs. __memory_failure()

Pull x86/fpu changes from Ingo Molnar.

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  i387: Split up <asm/i387.h> into exported and internal interfaces
  i387: Uninline the generic FP helpers that we expose to kernel modules

Pull x86/build changes from Ingo Molnar.

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, build: Fix portability issues when cross-building
  x86, tools: Remove unneeded header files from tools/build.c
  USB: ffs-test: Don't duplicate {get,put}_unaligned*() functions
  x86, efi: Fix endian issues and unaligned accesses
  x86, boot: Restrict CFLAGS for hostprogs
  x86, mkpiggy: Don't open code put_unaligned_le32()
  x86, relocs: Don't open code put_unaligned_le32()
  tools/include: Add byteshift headers for endian access

Pull x86/eficross (booting 32/64-bit kernel from 64/32-bit EFI) from Ingo Molnar

* 'x86-eficross-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Allow basic init with mixed 32/64-bit efi/kernel
  x86, efi: Add basic error handling
  x86, efi: Cleanup config table walking
  x86, efi: Convert printk to pr_*()
  x86, efi: Refactor efi_init() a bit

Pull x86/debug changes from Ingo Molnar.

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix section warnings
  x86-64: Fix CFI data for common_interrupt()
  x86: Properly _init-annotate NMI selftest code
  x86/debug: Fix/improve the show_msr=<cpus> debug print out

Merge branches 'x86-cpu-for-linus', 'x86-boot-for-linus', 'x86-cpufeature-for-linus', 'x86-process-for-linus' and 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull trivial x86 branches from Ingo Molnar: small one-liners to fix up
details.

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Remove some noise from boot log when starting cpus

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Fix port argument to inl() function

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpufeature: Add CPU features from Intel document 319433-012A

* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64: Record stack pointer before task execution begins

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Lower UV rtc clocksource rating

Pull x86/atomic changes from Ingo Molnar.

* 'x86-atomic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: atomic64 assembly improvements
  x86: Adjust asm constraints in atomic64 wrappers

Pull x86/asm changes from Ingo Molnar

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Include probe_roms.h in probe_roms.c
  x86/32: Print control and debug registers for kerenel context
  x86: Tighten dependencies of CPU_SUP_*_32
  x86/numa: Improve internode cache alignment
  x86: Fix the NMI nesting comments
  x86-64: Improve insn scheduling in SAVE_ARGS_IRQ
  x86-64: Fix CFI annotations for NMI nesting code
  bitops: Add missing parentheses to new get_order macro
  bitops: Optimise get_order()
  bitops: Adjust the comment on get_order() to describe the size==0 case
  x86/spinlocks: Eliminate TICKET_MASK
  x86-64: Handle byte-wise tail copying in memcpy() without a loop
  x86-64: Fix memcpy() to support sizes of 4Gb and above
  x86-64: Fix memset() to support sizes of 4Gb and above
  x86-64: Slightly shorten copy_page()

Merge first batch of patches from Andrew Morton:
 "A few misc things and all the MM queue"

* emailed from Andrew Morton <akpm@linux-foundation.org>: (92 commits)
  memcg: avoid THP split in task migration
  thp: add HPAGE_PMD_* definitions for !CONFIG_TRANSPARENT_HUGEPAGE
  memcg: clean up existing move charge code
  mm/memcontrol.c: remove unnecessary 'break' in mem_cgroup_read()
  mm/memcontrol.c: remove redundant BUG_ON() in mem_cgroup_usage_unregister_event()
  mm/memcontrol.c: s/stealed/stolen/
  memcg: fix performance of mem_cgroup_begin_update_page_stat()
  memcg: remove PCG_FILE_MAPPED
  memcg: use new logic for page stat accounting
  memcg: remove PCG_MOVE_LOCK flag from page_cgroup
  memcg: simplify move_account() check
  memcg: remove EXPORT_SYMBOL(mem_cgroup_update_page_stat)
  memcg: kill dead prev_priority stubs
  memcg: remove PCG_CACHE page_cgroup flag
  memcg: let css_get_next() rely upon rcu_read_lock()
  cgroup: revert ss_id_lock to spinlock
  idr: make idr_get_next() good for rcu_read_lock()
  memcg: remove unnecessary thp check in page stat accounting
  memcg: remove redundant returns
  memcg: enum lru_list lru
  ...

* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau/dp: support version 4.0 of DP table
  drm/nve0/disp: nvidia randomly decided to move the dithering method
  drm/nve0: initial modesetting support for kepler chipsets
  drm/nouveau: add bios connector type for dms59
  drm/nouveau: move out of staging drivers
  drm/nouveau: bump version to 1.0.0
  drm/nvd0/disp: ignore clock set if no pclk
  drm/nouveau: oops, increase channel dispc_vma to 4
  drm/nouveau: inform userspace of new kernel subchannel requirements
  drm/nouveau: remove m2mf creation on userspace channels
  drm/nvc0-/disp: reimplement flip completion method as fifo method
  drm/nouveau: move fence sequence check to start of loop
  drm/nouveau: remove subchannel names from places where it doesn't matter
  drm/nouveau/ttm: always do buffer moves on kernel channel

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>