As Jiri rightfully pointed out the current to_max3100_port() macro
implementation is fragile in a sense that it expects the variable
name to be port, otherwise it blow up the build.

Change this to be static inline to prevent bad compilation.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240410141135.1378948-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable tmout is being assigned a value that is never read, it is
being re-assinged in the following for-loop statement. The assignment
is redundant and can be removed.

Cleans up clang scan warning:
drivers/tty/serial/omap-serial.c:1096:3: warning: Value stored to 'tmout'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240411085537.306020-1-colin.i.king@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need to inline serial_base_add_isa_preferred_console()  based on
CONFIG_SERIAL_8250_CONSOLE and not based on CONFIG_SERIAL_CORE_CONSOLE.
Otherwise we can get the follwoing error as noted by Stephen:

ERROR: modpost: "serial_base_add_isa_preferred_console"
[drivers/tty/serial/8250/8250.ko] undefined!

We also have a duplicate inlined serial_base_add_isa_preferred_console(),
in serial_base_bus.c added by the same commit by accident, let's drop it.

Fixes: a8b04cfe ("serial: 8250: Add preferred console in serial8250_isa_init_ports()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240411080622.11929-1-tony@atomide.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since each I2C/SPI probe function can modify sc16is7xx_regcfg at the same
time, change structure to be constant and do the required modifications on
a local copy.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240409154253.3043822-6-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Before, sc16is7xx_lines was checked for a free (zero) bit first, and then
later it was set only if UART port registration succeeded. Now that
sc16is7xx_lines is shared for the I2C and SPI drivers, there is a
possibility that the two drivers can simultaneously try to reserve the same
line bit at the same time.

To prevent this, make sure line allocation is reserved atomically, and use
a new variable to hold the status of UART port registration.

Now that we no longer need to search if a bit is set, it is now possible
to simplify sc16is7xx_lines allocation by using the IDA framework.

Link: https://lore.kernel.org/all/20231212150302.a9ec5d085a4ba65e89ca41af@hugovil.com/
Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409154253.3043822-5-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Split the common code from sc16is7xx driver and move the I2C and SPI bus
parts into interface-specific source files.

sc16is7xx becomes the core functions which can support multiple bus
interfaces like I2C and SPI.

No functional changes intended.

Also simplify and improve Kconfig entries.
  - Capitalize SPI keyword for consistency
  - Display list of supported ICs each on a separate line (and aligned) to
    facilitate locating a specific IC model
  - Add Manufacturer name at start of description string
  - Add UART keyword to description string
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409154253.3043822-4-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to check for previous port registration in
sc16is7xx_remove() because if sc16is7xx_probe() succeeded, we are
guaranteed to have successfully registered both ports. We can thus
unconditionally clear the line allocation bit in sc16is7xx_lines.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240409154253.3043822-3-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace incorrect include with the proper one for sched_set_fifo()
declaration.

Fixes: 28d2f209 ("sched,serial: Convert to sched_set_fifo()")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409154253.3043822-2-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case that no RTS GPIO is available do not use a dedicated nullified
serial_rs485 struct to disable RS485 support, but simply delete the
SER_RS485_ENABLED flag in the ports rs485_supported struct.
This make the structure superfluous and it can be removed.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240407002709.16224-5-l.sanfilippo@kunbus.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The serial core already checks the RS485 RTS settings for sanity, so remove
the superfluous check in serial8250_em485_config().
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240407002709.16224-4-l.sanfilippo@kunbus.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable dmacr is only used if DMA is enabled, so move it into the
CONFIG_DMA_ENGINE conditional.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240407002709.16224-3-l.sanfilippo@kunbus.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to earlier code changes function pl011_get_rs485_mode() is now merely
a wrapper for uart_get_rs485_mode() which does not add any further
functionality. So remove it and instead call uart_get_rs485_mode()
directly.
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240407002709.16224-2-l.sanfilippo@kunbus.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sort the headers in alphabetic order in order to ease
the maintenance for this part.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-9-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of using container_of() explicitly, introduce a helper macro.
This saves a lot of lines of code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240409144721.638326-8-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SIMPLE_DEV_PM_OPS() is deprecated, replace it with the
DEFINE_SIMPLE_DEV_PM_OPS() and use pm_sleep_ptr() for setting
the driver's PM routines.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-7-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MODULE_ALIAS() in most cases is a pure hack to avoid placing ID tables.
Replace it with the respective ID tables.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-6-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Switch to use dev_err_probe() to simplify the error path and
unify a message template.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-5-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct uart_port has a copy of the IRQ that is also stored
in the private data structure. Remove the duplication in the latter
one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-4-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Get crystal frequency via device property instead of using
a platform data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-3-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable or disable loopback at run-time.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409144721.638326-2-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240318064216.1765-1-wangkaiyuan@inspur.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.
Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240318064036.1656-1-wangkaiyuan@inspur.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver actually supports more than one chip.
Update Kconfig entry to list the supported chips.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-17-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no code using max3100_work() before the definition of it.
Remove unneeded forward declaration.

While at it, move max3100_dowork() and max3100_timeout() down in
the code to be after actual max3100_work() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-15-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Serial core provides a standard timeout for polling modem state.
Use it instead of a custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-7-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

While there is no user of this callback in the kernel, it also breaks
the relationship in the driver model. The correct implementation should
be done via GPIO or regulator framework.

Remove custom HW shutdown support for good and, if needed, we will
implement it correctly later on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-6-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no user of the struct plat_max3100 outside the driver.
Inline its contents into the driver. While at it, drop outdated
example in the comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-5-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sparse is not happy about misuse of bitwise types:

  .../max3100.c:194:13: warning: incorrect type in assignment (different base types)
  .../max3100.c:194:13:    expected unsigned short [addressable] [usertype] etx
  .../max3100.c:194:13:    got restricted __be16 [usertype]
  .../max3100.c:202:15: warning: cast to restricted __be16

Fix this by choosing proper types for the respective variables.

Fixes: 7831d56b ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-4-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The removal of the last MAX3100 device triggers the removal of
the driver. However, code doesn't update the respective global
variable and after insmod — rmmod — insmod cycle the kernel
oopses:

  max3100 spi-PRP0001:01: max3100_probe: adding port 0
  BUG: kernel NULL pointer dereference, address: 0000000000000408
  ...
  RIP: 0010:serial_core_register_port+0xa0/0x840
  ...
   max3100_probe+0x1b6/0x280 [max3100]
   spi_probe+0x8d/0xb0

Update the actual state so next time UART driver will be registered
again.

Hugo also noticed, that the error path in the probe also affected
by having the variable set, and not cleared. Instead of clearing it
move the assignment after the successfull uart_register_driver() call.

Fixes: 7831d56b ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240402195306.269276-3-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lock may not be taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:

  WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
  ...
  Workqueue: max3100-0 max3100_work [max3100]
  RIP: 0010:uart_handle_cts_change+0xa6/0xb0
  ...
   max3100_handlerx+0xc5/0x110 [max3100]
   max3100_work+0x12a/0x340 [max3100]

Fixes: 7831d56b ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240402195306.269276-2-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The UART's input clock rate can change at runtime but this is not
handled by the driver.

Add a clock_notifier callback that updates the divisors when the input
clock is updated. The serial8250_update_uartclk() is used to do so.
PRE_RATE_CHANGE and ABORT_RATE_CHANGE notifications are ignored, only
the POST_RATE_CHANGE is used. Not using PRE_RATE_CHANGE notification can
result in a few corrupted bytes during frequency transitions but, IMHO,
it can be acceptable in many use cases.

It has been tested on a DAVINCI/OMAP-L138 processor.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240405120552.35991-1-bastien.curutchet@bootlin.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the Actions Semi Owl UART to newer DT schema.
Created DT schema based on the .txt file which had
`compatible`, `reg` and `interrupts` as the
required properties. This binding is used by Actions S500, S700
and S900 SoC. S700 and S900 use the same UART compatible string.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kanak Shilledar <kanakshilledar111@protonmail.com>
Link: https://lore.kernel.org/r/20240405080235.11563-1-kanakshilledar@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are considerations to drop platform_driver_probe() as a concept
that isn't relevant any more today. It comes with an added complexity
that makes many users hold it wrong. (E.g. this driver should have
marked the driver struct with __refdata to prevent the below mentioned
false positive section mismatch warning.)

This fixes a W=1 build warning:

	WARNING: modpost: drivers/tty/serial/pmac_zilog: section mismatch in reference: pmz_driver+0x8 (section: .data) -> pmz_detach (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5ea3174616abc9fa256f115b4fb175d289ac1754.1711748999.git.u.kleine-koenig@pengutronix.deTested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning

	WARNING: modpost: drivers/tty/amiserial: section mismatch in reference: amiga_serial_driver+0x8 (section: .data) -> amiga_serial_remove (section: .exit.text)

that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/043afcbc94ad90079301f3c7738136a7993a1748.1711748999.git.u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change strips $abs_srctree of the input file containing the
character mapping table in the generated output. The motivation for this
change is Yocto emitting a build warning

        WARNING: linux-lxatac-6.7-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-lxatac/6.7-r0/drivers/tty/vt/consolemap_deftbl.c in package linux-lxatac-src contains reference to TMPDIR

So this change brings us one step closer to make the build result
reproducible independent of the build path.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240311113017.483101-2-u.kleine-koenig@pengutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

We expect nc->if_name to be NUL-terminated based on existing manual
NUL-byte assignments and checks:
|	nc.if_name[IFNAMSIZ-1] = '\0';
...
| 	if (nc->if_name[0] != '\0')

Let's use the new 2-argument strscpy() since it guarantees
NUL-termination on the destination buffer while correctly using the
destination buffers size to bound the operation.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240318-strncpy-drivers-tty-n_gsm-c-v1-1-da37a07c642e@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a statement with two semicolons. Remove the second one, it
is redundant.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240315091734.2430416-1-colin.i.king@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

R-Car V4M (R8A779H0) SoC has the R-Car Gen4 compatible SCIF ports, so
document the SoC specific bindings.
Signed-off-by: Nghia Nguyen <nghia.nguyen.jg@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/49b854603c2c3ed6b2edd441f1d55160e0453b70.1709741175.git.geert+renesas@glider.beSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver is using "sifive,fu540-c000-uart0" as a binding. The device
tree and documentation states "sifive,fu540-c000-uart" instead. This
means the binding is not matched and not used.

This did not cause any problems because the alternative binding, used in
the device tree, "sifive,uart0" is not handling the hardware any
different.

Align the binding in the driver with the documentation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240307090950.eLELkuyK@linutronix.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307114243.3642832-1-andriy.shevchenko@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>