- 01 Mar, 2016 20 commits
-
-
Imre Deak authored
During system suspend we need to first disable power wells then unitialize the display core. In case power well support is disabled we did this in the wrong order, so fix this up. Fixes: d314cd43 ("drm/i915: fix handling of the disable_power_well module option") CC: stable@vger.kernel.org CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456778945-5411-1-git-send-email-imre.deak@intel.com
-
arun.siluvery@linux.intel.com authored
execute during context save/restore, good to have them in error state. v2: use wa_ctx->size and print only size values (Mika) v3: simplify conditions when recording and freeing object (Chris) v4: resolve checkpatch errors (Tvrtko) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1456831476-10782-1-git-send-email-arun.siluvery@linux.intel.com
-
Ville Syrjälä authored
LPT/WPT-H are limited to max 180 MHz CRT dotclock. Most other platforms have a limit of 350 MHz. Supposedly gen3 and gen4 go up to 400 MHz. VLV is a bit special since the docs are poor. Supposedly the DAC would be good up to 355 MHz, but currently we limit the DPLL to 270 MHz, so we'll have to limit the port clock to the same unless we change the DPLL limits. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455738073-14502-7-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
Rather than assume the VGA dotclock is really the FDI based thing, let's read out the real thing via iclkip, and after readout it'll get to compare it with the FDI based number to make sure they're in sync. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The reason for spcial casing 20MHz in the iclkip calculations is that it would overflow the 7 bit divisor value. Let's rewrite the special case to check for just that, and bump up auxdiv when needed. This makes the code work for freqeuencies close to but not exactly 20MHz. The real lower limit for auxdiv=0 is actually: 172800000/(0x7f+2)*64)=~20930 kHz, and below that we must resort to auxdiv=1. Actually this is all very theoretical since we limit the dotclock to min 25MHz with CRT on all platforms. 25Mhz is actually the documented limit in Bspec, so it seems we ought to never need to worry about the auxdiv=1 case. But no harm in having it. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Instead of assuming we've correctly set up SPLL to run at 270Mhz for FDI, let's use the port_clock from pipe_config which should be what we want. This would catch problems if someone misconfigures SPLL for whatever reason. Signed-off-by:
-
Ville Syrjälä authored
Currently we check if the encoder's idea of dotclock agrees with what we calculated based on the FDI parameters. We do this in the encoder .get_config() hooks, which isn't so nice in case the BIOS (or some other outside party) made a mess of the state and we're just trying to take over. So as a prep step to being able sanitize such a bogus state, move the the sanity check to just after we've read out the entire state. If we then need to sanitize a bad state, it should be easier to move the sanity check to occur after sanitation instead of before it. Signed-off-by:
-
Ville Syrjälä authored
On HSW/BDW ddi_pll_sel is the actual register value. Let's dump it in hex so that people migth actually understand what it says. Signed-off-by:
-
Ville Syrjälä authored
Instead of repopulatin the rotation_info struct for the fb every time we try to use the fb, we can just populate it once when creating the fb, and later we can just copy the pre-populate struct into the gtt_view. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1455569699-27905-10-git-send-email-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
rotate_pages() checks to see if it got called with a NULL sg, and then goes to extract it from sg->sgl. It always gets called with a NULL sg for the first plane, so moving the initial 'sg=st->sgl' assignment out into intel_rotate_fb_obj_pages() seems less special-casey. Signed-off-by:
-
Ville Syrjälä authored
Throw out a bunch of unnecessary stuff from struct intel_rotation_info, and pull most of the remaining stuff to live under an array of per-color plane sub-structures. What still remains outside the sub-structure will be reorgranized later as well, but that requires more work elsewhere so leave it be for now. v2: Split the vma size == luma+chroma size fix to prep patch (Daniel) Signed-off-by:
-
Ville Syrjälä authored
intel_compute_page_offsets() gets passed a bunch of the framebuffer metadate sepearately. Just pass the framebuffer itself to make life simpler for the caller, and make it less likely they would make a mistake in the order of the arguments (as most as just unsigned ints and such). We still pass the pitch explicitly since for 90/270 degree rotation the caller has to pass in the right thing. Signed-off-by:
-
Ville Syrjälä authored
intel_pin_and_fence_fb_obj() only needs the framebuffer, and the desird rotation (to find the right GTT view for it), so no need to pass all kinds of plane stuff. The main motivation is to get rid of the uggy NULL plane_state handling due to fbdev. v2: Add a note why I really want this Signed-off-by:
-
Ville Syrjälä authored
SKL+ needs >4K alignment for tiled surfaces, so make intel_compute_page_offset() handle it. The way we do it is first we compute the closest tile boundary as before, and then figure out how many tiles we need to go to reach the desired alignment. The difference in the offset is then added into the x/y offsets. v2: Be less confusing wrt. units (pixels vs. bytes) (Daniel) v3: Use u32 for offsets Have intel_adjust_tile_offset() return the new offset (will be useful later) Add an offset_aligned variable (Daniel) Signed-off-by: -
Ville Syrjälä authored
The page aligned surface address calculation needs to know which way things are rotated. The contract now says that the caller must pass the rotate x/y coordinates, as well as the tile_height aligned stride in the tile_height direction. This will make it fairly simple to deal with 90/270 degree rotation on SKL+ where we have to deal with the rotated view into the GTT. v2: Pass rotation instead of bool even thoughwe only care about 0/180 vs. 90/270 v3: Introduce intel_tile_dims(), and don't mix up different units so much v4: Unconfuse bytes vs. pixels even more Signed-off-by:
-
Ville Syrjälä authored
Make if clear whether we're talking tile widths in bytes or in pixels. Signed-off-by:
-
Ville Syrjälä authored
The size of the rotated ggtt mapping ought to include the size of the chroma plane as well. Not a huge deal since we don't expose NV12 (or any pother planar format for that matter) yet. Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Fixes: 89e3e142 ("drm/i915: Support NV12 in rotated GGTT mapping") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Imre Deak authored
Not all platforms set this callback, so NULL check it before calling it. v2: - Call intel_update_watermarks() on HSW+ where the callback is not set. (Matt) CC: Matt Roper <matthew.d.roper@intel.com> Fixes: commit ed4a6a7c ("drm/i915: Add two-stage ILK-style watermark programming (v11)") Signed-off-by:
Matt Roper <matthew.d.roper@intel.com>
-
Tvrtko Ursulin authored
Assorted changes in the areas of code cleanup, reduction of invariant conditional in the interrupt handler and lock contention and MMIO access optimisation. * Remove needless initialization. * Improve cache locality by reorganizing code and/or using branch hints to keep unexpected or error conditions out of line. * Favor busy submit path vs. empty queue. * Less branching in hot-paths. v2: * Avoid mmio reads when possible. (Chris Wilson) * Use natural integer size for csb indices. * Remove useless return value from execlists_update_context. * Extract 32-bit ppgtt PDPs update so it is out of line and shared with two callers. * Grab forcewake across all mmio operations to ease the load on uncore lock and use chepear mmio ops. v3: * Removed some more pointless u8 data types. * Removed unused return from execlists_context_queue. * Commit message updates. v4: * Unclumsify the unqueue if statement. (Chris Wilson) * Hide forcewake from the queuing function. (Chris Wilson) Version 3 now makes the irq handling code path ~20% smaller on 48-bit PPGTT hardware, and a little bit less elsewhere. Hot paths are mostly in-line now and hammering on the uncore spinlock is greatly reduced together with mmio traffic to an extent. Benchmarking with "gem_latency -n 100" (keep submitting batches with 100 nop instruction) shows approximately 4% higher throughput, 2% less CPU time and 22% smaller latencies. This was on a big-core while small-cores could benefit even more. Most likely reason for the improvements are the MMIO optimization and uncore lock traffic reduction. One odd result is with "gem_latency -n 0" (dispatching empty batches) which shows 5% more throughput, 8% less CPU time, 25% better producer and consumer latencies, but 15% higher dispatch latency which is yet unexplained. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1456505912-22286-1-git-send-email-tvrtko.ursulin@linux.intel.com
-
Maarten Lankhorst authored
CI runs with DEBUG_WW_MUTEX_SLOWPATH, so -EDEADLK occurs a lot more. Handle the case where drm_atomic_commit fails with -EDEADLK correctly. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/56D3FEF1.6070306@linux.intel.comReviewed-by:
-
- 29 Feb, 2016 4 commits
-
-
Eric Engestrom authored
79e53945 ("DRM: i915: add mode setting support") added those variables but never used them. Signed-off-by:
Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by:
-
Eric Engestrom authored
ae80152d ("drm/i915: Rewrite VLV/CHV watermark code") removed everything that would have used those vars. Signed-off-by:
-
Matt Roper authored
In addition to calculating final watermarks, let's also pre-calculate a set of intermediate watermark values at atomic check time. These intermediate watermarks are a combination of the watermarks for the old state and the new state; they should satisfy the requirements of both states which means they can be programmed immediately when we commit the atomic state (without waiting for a vblank). Once the vblank does happen, we can then re-program watermarks to the more optimal final value. v2: Significant rebasing/rewriting. v3: - Move 'need_postvbl_update' flag to CRTC state (Daniel) - Don't forget to check intermediate watermark values for validity (Maarten) - Don't due async watermark optimization; just do it at the end of the atomic transaction, after waiting for vblanks. We do want it to be async eventually, but adding that now will cause more trouble for Maarten's in-progress work. (Maarten) - Don't allocate space in crtc_state for intermediate watermarks on platforms that don't need it (gen9+). - Move WaCxSRDisabledForSpriteScaling:ivb into intel_begin_crtc_commit now that ilk_update_wm is gone. v4: - Add a wm_mutex to cover updates to intel_crtc->active and the need_postvbl_update flag. Since we don't have async yet it isn't terribly important yet, but might as well add it now. - Change interface to program watermarks. Platforms will now expose .initial_watermarks() and .optimize_watermarks() functions to do watermark programming. These should lock wm_mutex, copy the appropriate state values into intel_crtc->active, and then call the internal program watermarks function. v5: - Skip intermediate watermark calculation/check during initial hardware readout since we don't trust the existing HW values (and don't have valid values of our own yet). - Don't try to call .optimize_watermarks() on platforms that don't have atomic watermarks yet. (Maarten) v6: - Rebase v7: - Further rebase v8: - A few minor indentation and line length fixes v9: - Yet another rebase since Maarten's patches reworked a bunch of the code (wm_pre, wm_post, etc.) that this was previously based on. v10: - Move wm_mutex to dev_priv to protect against racing commits against disjoint CRTC sets. (Maarten) - Drop unnecessary clearing of cstate->wm.need_postvbl_update (Maarten) v11: - Now that we've moved to atomic watermark updates, make sure we call the proper function to program watermarks in {ironlake,haswell}_crtc_enable(); the failure to do so on the previous patch iteration led to us not actually programming the watermarks before turning on the CRTC, which was the cause of the underruns that the CI system was seeing. - Fix inverted logic for determining when to optimize watermarks. We were needlessly optimizing when the intermediate/optimal values were the same (harmless), but not actually optimizing when they differed (also harmless, but wasteful from a power/bandwidth perspective). Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: -
Daniel Vetter authored
Signed-off-by:
-
- 26 Feb, 2016 6 commits
-
-
Chris Wilson authored
Given that the intel_lr_context_pin cannot succeed without the object, we cannot reach intel_lr_context_unpin() without first allocating that object - so we can remove the redundant test. Signed-off-by:
-
Chris Wilson authored
The multiple levels of indirect do nothing but hinder the compiler and the pointer chasing turns to be quite painful but painless to fix. Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
-
Chris Wilson authored
Elsewhere we have adopted the convention of using '_link' to denote elements in the list (and '_list' for the actual list_head itself), and that the name should indicate which list the link belongs to (and preferrably not just where the link is being stored). s/vma_link/obj_link/ (we iterate over obj->vma_list) s/mm_list/vm_link/ (we iterate over vm->[in]active_list) Signed-off-by:
-
Chris Wilson authored
commit 09731280 Author: Imre Deak <imre.deak@intel.com> Date: Wed Feb 17 14:17:42 2016 +0200 drm/i915: Add helper to get a display power ref if it was already enabled left the rpm wakelock assertions unbalanced if CONFIG_PM was disabled as intel_runtime_pm_get_if_in_use() would return true without incrementing the local bookkeeping required for the assertions. Signed-off-by:
-
Michel Thierry authored
The driver should only set the "RS context enable" bit in the context image if we plan to use the resource streamer. Reviewed-by:
Michel Thierry <michel.thierry@intel.com> Signed-off-by:
-
Michel Thierry authored
The cache line offset for the Indirect CS context (0x21C8) varies from gen to gen. v2: Move it into a function (Arun), use MISSING_CASE (Chris) v3: Rebased (catched by ci bat) Cc: Arun Siluvery <arun.siluvery@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
- 25 Feb, 2016 4 commits
-
-
Maarten Lankhorst authored
Commit 791a32be ("drm/i915: Drop intel_update_sprite_watermarks") removes the use of this variable, but forgot to remove it. Reviewed-by:
-
Maarten Lankhorst authored
Currently we perform our own wait in post_plane_update, but the atomic core performs another one in wait_for_vblanks. This means that 2 vblanks are done when a fb is changed, which is a bit overkill. Merge them by creating a helper function that takes a crtc mask for the planes to wait on. The broadwell vblank workaround may look gone entirely but this is not the case. pipe_config->wm_changed is set to true when any plane is turned on, which forces a vblank wait. Changes since v1: - Removing the double vblank wait on broadwell moved to its own commit. Changes since v2: - Move out POWER_DOMAIN_MODESET handling to its own commit. Changes since v3: - Do not wait for vblank on legacy cursor updates. (Ville) - Move broadwell vblank workaround comment to page_flip_finished. (Ville) Changes since v4: - Compile fix, legacy_cursor_flip -> *_update. Changes since v5: - Kill brackets. - Add WARN_ON when wait_for_vblanks fails. - Remove extra newlines. - Split the checks whether vblank is needed to a separate function, with comments why a vblank is needed. Signed-off-by:
-
Maarten Lankhorst authored
Right now there's separate power domain handling for update_pipe and modesets. Unify this and only grab POWER_DOMAIN_MODESET once. Signed-off-by:
-
Maarten Lankhorst authored
Use our newly created encoder_mask to iterate over the encoders. This makes it possible to get the crtc power domains from the crtc_state at any time, without any locks or having to look at the legacy state. Signed-off-by:
-
- 22 Feb, 2016 6 commits
-
-
Ville Syrjälä authored
for_each_pipe_masked() can be used to iterate over the pipes included in the user provided pipe mask. Removes a few lines of duplicated code. Signed-off-by:
-
Ville Syrjälä authored
Starting from BDW the DE_PIPE interrupts for pipe B and C belong to the relevant display power well. So we should make sure we've finished processing them before turning off the power well. The pipe interrupts shouldn't really happen at this point anymore since we've already shut down the planes/pipes/whatnot, but being a bit paranoid shouldn't hurt. Signed-off-by:
-
Ville Syrjälä authored
After we've told the irq code we don't want to handle display irqs anymore, we must make sure any display irq handling already kicked off has finished before we actually turn off the power well. I wouldn't expect PIPESTAT based interrupts to occur anymore since vblanks/page flips/gmbus/etc should all be quiescent at this point. But at least hotplug interrupts could still occur. Hotplug interrupts may also kick off the workqueue based hotplug processing, but that code should take the required power domain references itself, so there shouldn't be any need to synchronize with the hotplug processing from the power well code. Signed-off-by:
-
Ville Syrjälä authored
PIPESTAT registers live in the display power well on VLV/CHV, so we shouldn't access them when things are powered down. Let's check whether the display interrupts are on or off before accessing the PIPESTAT registers. Another option would be to read the PIPESTAT registers only when the IIR register indicates that there's a pending pipe event. But that would mean we might miss even more underrun reports than we do now, because the underrun status bit lives in PIPESTAT but doesn't actually generate an interrupt. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93738 Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
-
Mika Kuoppala authored
DMC debugmask bits should stick so no need to write them everytime dc state is changed. v2: Write after firmware has been successfully loaded (Ville) Signed-off-by:
-
Mika Kuoppala authored
Cores need to be included into the debug mask. We don't exactly know what it does but the spec says it must be enabled. So obey. v2: Cores should be only set for BXT (Imre, Art) Cc: Imre Deak <imre.deak@intel.com> Cc: Runyan, Arthur J <arthur.j.runyan@intel.com> Signed-off-by:
-
