- 08 Jan, 2024 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in a drm_info message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
- 05 Jan, 2024 15 commits
-
-
Michal Wajdeczko authored
It looks that declaration of kunit_get_current_test() was available in xe_guc_relay.c only with CONFIG_KUNIT enabled. If CONFIG_KUNIT is disabled we fail with: In file included from ../include/linux/build_bug.h:5, from ../include/linux/bitfield.h:10, from ../drivers/gpu/drm/xe/xe_guc_relay.c:6: ../drivers/gpu/drm/xe/xe_guc_relay.c: In function ‘xe_guc_relay_process_guc2vf’: ../drivers/gpu/drm/xe/xe_guc_relay.c:863:52: error: implicit declaration of function ‘kunit_get_current_test’ [-Werror=implicit-function-declaration] 863 | if (unlikely(!IS_SRIOV_VF(relay_to_xe(relay)) && !kunit_get_current_test())) | ^~~~~~~~~~~~~~~~~~~~~~ ../include/linux/compiler.h:77:42: note: in definition of macro ‘unlikely’ 77 | # define unlikely(x) __builtin_expect(!!(x), 0) | ^ Reported-by:Mika Kuoppala <mika.kuoppala@linux.intel.com> Fixes: 811fe9f5 ("drm/xe/guc: Introduce Relay Communication for SR-IOV") Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Tested-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Link: https://lore.kernel.org/r/20240105171947.321-1-michal.wajdeczko@intel.comSigned-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com>
-
Ruthuvikas Ravikumar authored
This kunit verifies the mocs registers content with the KMD programmed values before and after GT reset. v2: Remove extra blank lines between the local variables definitions (Matt Roper) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Ruthuvikas Ravikumar <ruthuvikas.ravikumar@intel.com> Signed-off-by:
Janga Rahul Kumar <janga.rahul.kumar@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20231222192352.927101-1-janga.rahul.kumar@intel.comSigned-off-by:
-
Michal Wajdeczko authored
GuC Relay infrastructure is ready, start handling relay messages from the GuC to unblock testing on the live system. Reviewed-by:
Piotr Piórkowski <piotr.piorkowski@intel.com> Link: https://lore.kernel.org/r/20240104222031.277-11-michal.wajdeczko@intel.comSigned-off-by:
-
Michal Wajdeczko authored
Add few tests to make sure that some negative and normal use scenarios of the GuC Relay are implemented correctly. Reviewed-by:
-
Michal Wajdeczko authored
We want to use replacement functions in upcoming kunit tests. Reviewed-by:
-
Michal Wajdeczko authored
There are scenarios where SR-IOV Virtual Function (VF) driver will need to get additional data that is not available over VF MMIO BAR nor could be queried from the GuC firmware and must be obtained from the Physical Function (PF) driver. To allow such communication between VF and PF drivers, GuC supports set of H2G and G2H actions which allows relaying embedded messages, that are otherwise opaque for the GuC. To allow use of this communication mechanism, provide functions for sending requests and handling replies and placeholder where we will put handlers for incoming requests. Reviewed-by:
-
Michal Wajdeczko authored
The communication between Virtual Function (VF) drivers and Physical Function (PF) drivers is based on the GuC firmware acting as a proxy (relay) agent. Add related ABI definitions that we will be using in upcoming patches with our GuC Relay implementation. Reviewed-by:
-
Michal Wajdeczko authored
In upcoming new GuC ABI definitions we will want to refer to max number of dwords that could fit into CTB HXG message. Add explicit definition named as GUC_CTB_MAX_DWORDS and start using it. Reviewed-by:
-
Michal Wajdeczko authored
In addition to MMIO and CTB communication between the host driver and the GUC firmware, we will start using GuC HXG message protocol in communication between SR-IOV VFs and PF. Define helpers related to HXG message protocol to minimize code duplication. Reviewed-by:
-
Michal Wajdeczko authored
To simplify logging and help identify SR-IOV specific messages related to the GT, define set of helper macros that will add prefix to the messages based on the current SR-IOV mode. Reviewed-by:
-
Michal Wajdeczko authored
According to the PCI Express specification, the SR-IOV Virtual Functions (VFs) are numbered starting with 1 (VF1, VF2, ...). Additionally, both driver and GuC will refer to Physical Function (PF) as VF0. Define helper macro to represent VFn and PF. Reviewed-by:
-
Michal Wajdeczko authored
We plan to use several workers where we might be running long operations. Allocate dedicated workqueue to avoid undesired interaction with non-virtualized workers. Reviewed-by:
-
José Roberto de Souza authored
Now intel_wakeref_t is a unsigned long and Xe KMD version of those functions should use the same type, so changing from bool to intel_wakeref_t. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
José Roberto de Souza authored
i915 defines it as unsigned long so Xe should do the same to avoid compilation warnings: CC [M] drivers/gpu/drm/i915/i915_gem.o CC [M] drivers/gpu/drm/xe/i915-display/intel_display_power_well.o In file included from ./include/drm/drm_mm.h:51, from drivers/gpu/drm/xe/xe_bo_types.h:11, from drivers/gpu/drm/xe/xe_bo.h:11, from ./drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h:11, from ./drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h:15, from drivers/gpu/drm/i915/display/intel_display_power.c:8: drivers/gpu/drm/i915/display/intel_display_power.c: In function ‘print_async_put_domains_state’: drivers/gpu/drm/i915/display/intel_display_power.c:408:29: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=] 408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~ 409 | power_domains->async_put_wakeref); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | int ./include/drm/drm_print.h:410:39: note: in definition of macro ‘drm_dev_dbg’ 410 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__) | ^~~ ./include/drm/drm_print.h:510:33: note: in expansion of macro ‘drm_dbg_driver’ 510 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__) | ^~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_display_power.c:408:9: note: in expansion of macro ‘drm_dbg’ 408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n", | ^~~~~~~ drivers/gpu/drm/i915/display/intel_display_power.c:408:50: note: format string is defined here 408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n", | ~~^ | | | long unsigned int | %u CC [M] drivers/gpu/drm/i915/i915_gem_evict.o CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o CC [M] drivers/gpu/drm/xe/i915-display/intel_display_trace.o CC [M] drivers/gpu/drm/xe/i915-display/intel_display_wa.o CC [M] drivers/gpu/drm/i915/i915_query.o Fixes: 44e69495 ("drm/xe/display: Implement display support") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: -
Jani Nikula authored
intel_wakeref_t is supposed to be a mostly opaque cookie to its users. It should only be checked for being non-zero and set to zero. Debug logging its actual value is meaningless. Switch to just debug logging whether the async_put_wakeref is non-zero. The issue dates back to much earlier than commit b49e894c ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library"), but this is the one that brought about a build failure due to the printf format. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au Fixes: b49e894c ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library") Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
-
- 27 Dec, 2023 1 commit
-
-
Lucas De Marchi authored
Graphics version 20.04, used in Lunar Lake, needs WA 16020183090 for steppings A*. Set ENABLE_SEMAPHORE_POLL_BIT in INSTPM(RENDER_RING_BASE) and whitelist CSBE_DEBUG_STATUS for userspace to be able to use it and complement the workaround. Cc: Haridhar Kalvala <haridhar.kalvala@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
- 26 Dec, 2023 1 commit
-
-
José Roberto de Souza authored
This is a comment left over of commit d3d76739 ("drm/xe/uapi: Remove sync binds"). Fixes: d3d76739 ("drm/xe/uapi: Remove sync binds") Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
- 22 Dec, 2023 1 commit
-
-
Lucas De Marchi authored
Add a dependency on CONFIG_64BIT since currently the xe driver doesn't build on 32bits. It may be enabled again after all the issues are fixed. Fixes: dd08ebf6 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Reviewed-by:
-
- 21 Dec, 2023 21 commits
-
-
Daniele Ceraolo Spurio authored
We're currently sending non-blocking H2G messages using the EVENT type, which suppresses all CTB protocol replies from the GuC, including the failure cases. This might cause errors to slip through and manifest as unexpected behavior (e.g. a context state might not be what the driver thinks it is because the state change command was silently rejected by the GuC). To avoid this kind of problems, we can use the FAST_REQUEST type instead, which suppresses the reply only on success; this way we still get the advantage of not having to wait for an ack from the GuC (i.e. the H2G is still non-blocking) while still detecting errors. Since we can't escalate to the caller when a non-blocking message fails, we need to escalate to GT reset instead. Note that FAST_REQUEST failures are NOT expected and are usually a sign that the H2G was either malformed or requested an illegal operation. v2: assign fence values to FAST_REQUEST messages, fix abi doc, use xe_gt printers (Michal). v3: fix doc alignment, fix and improve prints (Michal) Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v2 Reviewed-by:
-
Tejas Upadhyay authored
Wa_14019877138 is also needed for xe_lpg graphics 12.70/71 Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com>
-
Michal Wajdeczko authored
Add few tests to make sure that basic usage scenarios of the GuC Doorbells Manager are implemented correctly. Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Tests might use locking, better to have LOCKDEP enabled. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Use xe helper code to allocate fake xe device. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Replace drm_kunit_helper_alloc_drm_device with xe helper. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Current KUnit implementation does not reset test->priv in case of parametrized tests and that may lead to wrongly treat our output pointer to fake xe_device from first call as input pointer with xe_pci_fake_data on subsequent calls. Restore test->priv to original value to avoid invalid access. Acked-by:
-
Michal Wajdeczko authored
There will be more KUnit tests added that will require fake device. Define generic helper functions to avoid code duplications. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
We want to add code that will check the driver's SR-IOV mode. Update xe_pci_fake_device_init() and struct xe_pci_fake_data to either explicitly specify desired SR-IOV mode of the fake device or fallback to the default bare-metal mode. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
The GFX doorbell solution provides a mechanism for submission of workload to the graphics hardware by a ring3 application without the penalty of ring transition for each workload submission. This feature is not currently used by the Linux drivers, but in SR-IOV mode the doorbells are treated as shared resource and the PF driver must be able to provision exclusive range of doorbells IDs across all enabled VFs. Introduce simple GuC doorbell ID manager that will be used by the PF driver for VFs provisioning and can later be used by submission code once we are ready to switch from H2G based notifications to doorbells mechanism. Cc: Matthew Brost <matthew.brost@intel.com> Cc: Piotr Piórkowski <piotr.piorkowski@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
We track TLB invalidation seqno per GT and we have GT oriented message helpers, so it's better to use GT oriented log functions. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
Instead of using generic drm_err_printer() that just adds static prefix, or drm_info_printer() that outputs only device name, add new helpers that create dedicated drm_printers that use our GT oriented xe_gt_err() and xe_gt_info() functions. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
There are small differences in handling of the register based interrupts on the VF driver as some registers are not accessible to the VF driver. Additionally VFs must support Memory Based Interrupts. Add VF specific interrupt handler for this. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
When Memory Based Interrupts are used, the VF driver must provide to the GuC references to the Source and Status Report Pages. Reviewed-by:
-
Michal Wajdeczko authored
When Memory Based Interrupts are used, the VF driver must provide in the LRC the references to the Source and Status Report Pages. Update the LRC according to the requirements. Reviewed-by:
-
Michal Wajdeczko authored
The register based interrupts infrastructure does not scale efficiently to allow delivering interrupts to a large number of virtual machines. Memory based interrupt reporting provides an efficient and scalable infrastructure. Define handler to read and dispatch memory based interrupts. We will use this handler in upcoming patch. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
When we map BO in GGTT, then by default we are using PAT index that corresponds to XE_CACHE_WB but ppcoming feature will require use of the PAT index of the XE_CACHE_UC. Define new BO flag that could be used during BO creation to force alternate caching. Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
When interrupts are delivered using memory based mechanism, engines will write status to the report page at the offset (in bytes) that corresponds to their interrupt bit from the GT_INTR_DW register. Add engine interrupt offset definitions to engine info as we will need this to process memory based interrupts. Bspec: 46149, 50829, 50844 Reviewed-by:
-
Michal Wajdeczko authored
Add bits definitions that we will be using in upcoming patch. Reviewed-by:
-
Michal Wajdeczko authored
The new memory based interrupt processing uses additional entries in the context. Add required definitions. Bspec: 45585, 60184 Reviewed-by:
-
Michal Wajdeczko authored
The RING_INT_SRC_RPT_PTR register points to a cacheline in memory to which an engine must report as source of interrupt prior to generating an interrupt to the host. The RING_INT_STATUS_RPT_PTR register points to the first cacheline of the Interrupt Status Report (ISR) page (4KB) in graphics memory to which all engines report their interrupt status. The RING_IMR register has the interrupt enables and interrupt masks for an engine. We will refer to these registers shortly. Bspec: 45963, 45964, 45965 Reviewed-by:
-
