Skip to content

L
linux
Switch branch/tag
  1. 20 May, 2022 3 commits
  3. 19 May, 2022 16 commits
  5. 18 May, 2022 21 commits
    • Linus Torvalds's avatar
      Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost · db1fd3fc
      Linus Torvalds authored 
      Pull mlx5 fix from Michael Tsirkin:
 "One last minute fixup

  The patch has been on list for a while but as it was posted as part of
  a thread it was missed"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vdpa/mlx5: Use consistent RQT size
      db1fd3fc
    • Al Viro's avatar
      Fix double fget() in vhost_net_set_backend() · fb4554c2
      Al Viro authored 
      Descriptor table is a shared resource; two fget() on the same descriptor
may return different struct file references.  get_tap_ptr_ring() is
called after we'd found (and pinned) the socket we'll be using and it
tries to find the private tun/tap data structures associated with it.
Redoing the lookup by the same file descriptor we'd used to get the
socket is racy - we need to same struct file.

Thanks to Jason for spotting a braino in the original variant of patch -
I'd missed the use of fd == -1 for disabling backend, and in that case
we can end up with sock == NULL and sock != oldsock.

Cc: stable@kernel.org
Acked-by: default avatarMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      fb4554c2
    • Eli Cohen's avatar
      vdpa/mlx5: Use consistent RQT size · acde3929
      Eli Cohen authored 
      The current code evaluates RQT size based on the configured number of
virtqueues. This can raise an issue in the following scenario:

Assume MQ was negotiated.
1. mlx5_vdpa_set_map() gets called.
2. handle_ctrl_mq() is called setting cur_num_vqs to some value, lower
   than the configured max VQs.
3. A second set_map gets called, but now a smaller number of VQs is used
   to evaluate the size of the RQT.
4. handle_ctrl_mq() is called with a value larger than what the RQT can
   hold. This will emit errors and the driver state is compromised.

To fix this, we use a new field in struct mlx5_vdpa_net to hold the
required number of entries in the RQT. This value is evaluated in
mlx5_vdpa_set_driver_features() where we have the negotiated features
all set up.

In addition to that, we take into consideration the max capability of RQT
entries early when the device is added so we don't need to take consider
it when creating the RQT.

Last, we remove the use of mlx5_vdpa_max_qps() which just returns the
max_vas / 2 and make the code clearer.

Fixes: 52893733 ("vdpa/mlx5: Add multiqueue support")
Acked-by: default avatarJason Wang <jasowang@redhat.com>
Signed-off-by: default avatarEli Cohen <elic@nvidia.com>
Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      acde3929
    • Linus Torvalds's avatar
      Merge tag 'sound-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · ef130216
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "A collection of last-minute HD- an USB-audio quirks in addition to a
  fix for the legacy ISA wavefront driver.

  All look small and easy"

* tag 'sound-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Restore Rane SL-1 quirk
  ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
  ALSA: hda/realtek: Add quirk for TongFang devices with pop noise
  ALSA: hda/realtek: Add quirk for the Framework Laptop
  ALSA: wavefront: Proper check of get_user() error
  ALSA: hda/realtek: Add quirk for Dell Latitude 7520
  ALSA: hda - fix unused Realtek function when PM is not enabled
  ALSA: usb-audio: Don't get sample rate for MCT Trigger 5 USB-to-HDMI
      ef130216
    • Pablo Neira Ayuso's avatar
      netfilter: nf_tables: disable expression reduction infra · 9e539c5b
      Pablo Neira Ayuso authored 
      Either userspace or kernelspace need to pre-fetch keys inconditionally
before comparisons for this to work. Otherwise, register tracking data
is misleading and it might result in reducing expressions which are not
yet registers.

First expression is also guaranteed to be evaluated always, however,
certain expressions break before writing data to registers, before
comparing the data, leaving the register in undetermined state.

This patch disables this infrastructure by now.

Fixes: b2d30654 ("netfilter: nf_tables: do not reduce read-only expressions")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      9e539c5b
    • Ritaro Takenaka's avatar
      netfilter: flowtable: move dst_check to packet path · 2738d9d9
      Ritaro Takenaka authored 
      Fixes sporadic IPv6 packet loss when flow offloading is enabled.

IPv6 route GC and flowtable GC are not synchronized.
When dst_cache becomes stale and a packet passes through the flow before
the flowtable GC teardowns it, the packet can be dropped.
So, it is necessary to check dst every time in packet path.

Fixes: 227e1e4d ("netfilter: nf_flowtable: skip device lookup from interface index")
Signed-off-by: default avatarRitaro Takenaka <ritarot634@gmail.com>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      2738d9d9
    • Pablo Neira Ayuso's avatar
      netfilter: flowtable: fix TCP flow teardown · e5eaac2b
      Pablo Neira Ayuso authored 
      This patch addresses three possible problems:

1. ct gc may race to undo the timeout adjustment of the packet path, leaving
   the conntrack entry in place with the internal offload timeout (one day).

2. ct gc removes the ct because the IPS_OFFLOAD_BIT is not set and the CLOSE
   timeout is reached before the flow offload del.

3. tcp ct is always set to ESTABLISHED with a very long timeout
   in flow offload teardown/delete even though the state might be already
   CLOSED. Also as a remark we cannot assume that the FIN or RST packet
   is hitting flow table teardown as the packet might get bumped to the
   slow path in nftables.

This patch resets IPS_OFFLOAD_BIT from flow_offload_teardown(), so
conntrack handles the tcp rst/fin packet which triggers the CLOSE/FIN
state transition.

Moreover, teturn the connection's ownership to conntrack upon teardown
by clearing the offload flag and fixing the established timeout value.
The flow table GC thread will asynchonrnously free the flow table and
hardware offload entries.

Before this patch, the IPS_OFFLOAD_BIT remained set for expired flows on
which is also misleading since the flow is back to classic conntrack
path.

If nf_ct_delete() removes the entry from the conntrack table, then it
calls nf_ct_put() which decrements the refcnt. This is not a problem
because the flowtable holds a reference to the conntrack object from
flow_offload_alloc() path which is released via flow_offload_free().

This patch also updates nft_flow_offload to skip packets in SYN_RECV
state. Since we might miss or bump packets to slow path, we do not know
what will happen there while we are still in SYN_RECV, this patch
postpones offload up to the next packet which also aligns to the
existing behaviour in tc-ct.

flow_offload_teardown() does not reset the existing tcp state from
flow_offload_fixup_tcp() to ESTABLISHED anymore, packets bump to slow
path might have already update the state to CLOSE/FIN.

Joint work with Oz and Sven.

Fixes: 1e5b2471 ("netfilter: nf_flow_table: teardown flow timeout race")
Signed-off-by: default avatarOz Shlomo <ozsh@nvidia.com>
Signed-off-by: default avatarSven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      e5eaac2b
    • Joel Stanley's avatar
      net: ftgmac100: Disable hardware checksum on AST2600 · 6fd45e79
      Joel Stanley authored 
      The AST2600 when using the i210 NIC over NC-SI has been observed to
produce incorrect checksum results with specific MTU values. This was
first observed when sending data across a long distance set of networks.

On a local network, the following test was performed using a 1MB file of
random data.

On the receiver run this script:

 #!/bin/bash
 while [ 1 ]; do
        # Zero the stats
        nstat -r  > /dev/null
        nc -l 9899 > test-file
        # Check for checksum errors
        TcpInCsumErrors=$(nstat | grep TcpInCsumErrors)
        if [ -z "$TcpInCsumErrors" ]; then
                echo No TcpInCsumErrors
        else
                echo TcpInCsumErrors = $TcpInCsumErrors
        fi
 done

On an AST2600 system:

 # nc <IP of  receiver host> 9899 < test-file

The test was repeated with various MTU values:

 # ip link set mtu 1410 dev eth0

The observed results:

 1500 - good
 1434 - bad
 1400 - good
 1410 - bad
 1420 - good

The test was repeated after disabling tx checksumming:

 # ethtool -K eth0 tx-checksumming off

And all MTU values tested resulted in transfers without error.

An issue with the driver cannot be ruled out, however there has been no
bug discovered so far.

David has done the work to take the original bug report of slow data
transfer between long distance connections and triaged it down to this
test case.

The vendor suspects this this is a hardware issue when using NC-SI. The
fixes line refers to the patch that introduced AST2600 support.
Reported-by: default avatarDavid Wilder <wilder@us.ibm.com>
Reviewed-by: default avatarDylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6fd45e79
    • Kevin Mitchell's avatar
      igb: skip phy status check where unavailable · 942d2ad5
      Kevin Mitchell authored 
      igb_read_phy_reg() will silently return, leaving phy_data untouched, if
hw->ops.read_reg isn't set. Depending on the uninitialized value of
phy_data, this led to the phy status check either succeeding immediately
or looping continuously for 2 seconds before emitting a noisy err-level
timeout. This message went out to the console even though there was no
actual problem.

Instead, first check if there is read_reg function pointer. If not,
proceed without trying to check the phy status register.

Fixes: b72f3f72 ("igb: When GbE link up, wait for Remote receiver status condition")
Signed-off-by: default avatarKevin Mitchell <kevmitch@arista.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      942d2ad5
    • Lin Ma's avatar
      nfc: pn533: Fix buggy cleanup order · b8cedb70
      Lin Ma authored 
      When removing the pn533 device (i2c or USB), there is a logic error. The
original code first cancels the worker (flush_delayed_work) and then
destroys the workqueue (destroy_workqueue), leaving the timer the last
one to be deleted (del_timer). This result in a possible race condition
in a multi-core preempt-able kernel. That is, if the cleanup
(pn53x_common_clean) is concurrently run with the timer handler
(pn533_listen_mode_timer), the timer can queue the poll_work to the
already destroyed workqueue, causing use-after-free.

This patch reorder the cleanup: it uses the del_timer_sync to make sure
the handler is finished before the routine will destroy the workqueue.
Note that the timer cannot be activated by the worker again.

static void pn533_wq_poll(struct work_struct *work)
...
 rc = pn533_send_poll_frame(dev);
 if (rc)
   return;

 if (cur_mod->len == 0 && dev->poll_mod_count > 1)
   mod_timer(&dev->listen_timer, ...);

That is, the mod_timer can be called only when pn533_send_poll_frame()
returns no error, which is impossible because the device is detaching
and the lower driver should return ENODEV code.
Signed-off-by: default avatarLin Ma <linma@zju.edu.cn>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b8cedb70
    • David S. Miller's avatar
      Merge branch 'mptcp-checksums' · 575fb4fb
      David S. Miller authored 
      Mat Martineau says:

====================
mptcp: Fix checksum byte order on little-endian

These patches address a bug in the byte ordering of MPTCP checksums on
little-endian architectures. The __sum16 type is always big endian, but
was being cast to u16 and then byte-swapped (on little-endian archs)
when reading/writing the checksum field in MPTCP option headers.

MPTCP checksums are off by default, but are enabled if one or both peers
request it in the SYN/SYNACK handshake.

The corrected code is verified to interoperate between big-endian and
little-endian machines.

Patch 1 fixes the checksum byte order, patch 2 partially mitigates
interoperation with peers sending bad checksums by falling back to TCP
instead of resetting the connection.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      575fb4fb
    • Mat Martineau's avatar
      mptcp: Do TCP fallback on early DSS checksum failure · ae66fb2b
      Mat Martineau authored 
      RFC 8684 section 3.7 describes several opportunities for a MPTCP
connection to "fall back" to regular TCP early in the connection
process, before it has been confirmed that MPTCP options can be
successfully propagated on all SYN, SYN/ACK, and data packets. If a peer
acknowledges the first received data packet with a regular TCP header
(no MPTCP options), fallback is allowed.

If the recipient of that first data packet finds a MPTCP DSS checksum
error, this provides an opportunity to fail gracefully with a TCP
fallback rather than resetting the connection (as might happen if a
checksum failure were detected later).

This commit modifies the checksum failure code to attempt fallback on
the initial subflow of a MPTCP connection, only if it's a failure in the
first data mapping. In cases where the peer initiates the connection,
requests checksums, is the first to send data, and the peer is sending
incorrect checksums (see
https://github.com/multipath-tcp/mptcp_net-next/issues/275), this allows
the connection to proceed as TCP rather than reset.

Fixes: dd8bcd17 ("mptcp: validate the data checksum")
Acked-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ae66fb2b
    • Paolo Abeni's avatar
      mptcp: fix checksum byte order · ba2c89e0
      Paolo Abeni authored 
      The MPTCP code typecasts the checksum value to u16 and
then converts it to big endian while storing the value into
the MPTCP option.

As a result, the wire encoding for little endian host is
wrong, and that causes interoperabilty interoperability
issues with other implementation or host with different endianness.

Address the issue writing in the packet the unmodified __sum16 value.

MPTCP checksum is disabled by default, interoperating with systems
with bad mptcp-level csum encoding should cause fallback to TCP.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/275
Fixes: c5b39e26 ("mptcp: send out checksum for DSS")
Fixes: 390b95a5 ("mptcp: receive checksum for DSS")
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba2c89e0
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · 680b8926
      David S. Miller authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-05-17

This series contains updates to ice driver only.

Arkadiusz prevents writing of timestamps when rings are being
configured to resolve null pointer dereference.

Paul changes a delayed call to baseline statistics to occur immediately
which was causing misreporting of statistics due to the delay.

Michal fixes incorrect restoration of interrupt moderation settings.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      680b8926
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 089403a3
      David S. Miller authored 
      Steffen Klassert says:

====================
pull request (net): ipsec 2022-05-18

1) Fix "disable_policy" flag use when arriving from different devices.
   From Eyal Birger.

2) Fix error handling of pfkey_broadcast in function pfkey_process.
   From Jiasheng Jiang.

3) Check the encryption module availability consistency in pfkey.
   From Thomas Bartschies.

Please pull or let me know if there are problems.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      089403a3
    • Ard Biesheuvel's avatar
      ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2 · 3cfb3019
      Ard Biesheuvel authored 
      In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.

Fixes: 6c7cb60b ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: default avatarArd Biesheuvel <ardb@kernel.org>
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
      3cfb3019
    • Ard Biesheuvel's avatar
      ARM: 9196/1: spectre-bhb: enable for Cortex-A15 · 0dc14aa9
      Ard Biesheuvel authored 
      The Spectre-BHB mitigations were inadvertently left disabled for
Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in
that case. So fix that.

Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Signed-off-by: default avatarArd Biesheuvel <ardb@kernel.org>
Signed-off-by: default avatarRussell King (Oracle) <rmk+kernel@armlinux.org.uk>
      0dc14aa9
    • David S. Miller's avatar
      Merge tag 'mlx5-fixes-2022-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · 765d1216
      David S. Miller authored 
      Saeed Mahameed says:

====================
mlx5 fixes 2022-05-17

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      765d1216
    • Thomas Bartschies's avatar
      net: af_key: check encryption module availability consistency · 015c44d7
      Thomas Bartschies authored 
      Since the recent introduction supporting the SM3 and SM4 hash algos for IPsec, the kernel
produces invalid pfkey acquire messages, when these encryption modules are disabled. This
happens because the availability of the algos wasn't checked in all necessary functions.
This patch adds these checks.
Signed-off-by: default avatarThomas Bartschies <thomas.bartschies@cvk.de>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      015c44d7
    • Jiasheng Jiang's avatar
      net: af_key: add check for pfkey_broadcast in function pfkey_process · 4dc2a5a8
      Jiasheng Jiang authored 
      If skb_clone() returns null pointer, pfkey_broadcast() will
return error.
Therefore, it should be better to check the return value of
pfkey_broadcast() and return error if fails.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarJiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      4dc2a5a8
    • Al Viro's avatar
      percpu_ref_init(): clean ->percpu_count_ref on failure · a9171431
      Al Viro authored 
      That way percpu_ref_exit() is safe after failing percpu_ref_init().
At least one user (cgroup_create()) had a double-free that way;
there might be other similar bugs.  Easier to fix in percpu_ref_init(),
rather than playing whack-a-mole in sloppy users...

Usual symptoms look like a messed refcounting in one of subsystems
that use percpu allocations (might be percpu-refcount, might be
something else).  Having refcounts for two different objects share
memory is Not Nice(tm)...

Reported-by: syzbot+5b1e53987f858500ec00@syzkaller.appspotmail.com
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      a9171431
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7