1. 18 Nov, 2016 8 commits
  2. 14 Nov, 2016 1 commit
  3. 11 Nov, 2016 2 commits
    • Andreas Larsson's avatar
    • Thomas Tai's avatar
      sparc64: Fix find_node warning if numa node cannot be found · 74a5ed5c
      Thomas Tai authored
      When booting up LDOM, find_node() warns that a physical address
      doesn't match a NUMA node.
      
      WARNING: CPU: 0 PID: 0 at arch/sparc/mm/init_64.c:835
      find_node+0xf4/0x120 find_node: A physical address doesn't
      match a NUMA node rule. Some physical memory will be
      owned by node 0.Modules linked in:
      
      CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc3 #4
      Call Trace:
       [0000000000468ba0] __warn+0xc0/0xe0
       [0000000000468c74] warn_slowpath_fmt+0x34/0x60
       [00000000004592f4] find_node+0xf4/0x120
       [0000000000dd0774] add_node_ranges+0x38/0xe4
       [0000000000dd0b1c] numa_parse_mdesc+0x268/0x2e4
       [0000000000dd0e9c] bootmem_init+0xb8/0x160
       [0000000000dd174c] paging_init+0x808/0x8fc
       [0000000000dcb0d0] setup_arch+0x2c8/0x2f0
       [0000000000dc68a0] start_kernel+0x48/0x424
       [0000000000dcb374] start_early_boot+0x27c/0x28c
       [0000000000a32c08] tlb_fixup_done+0x4c/0x64
       [0000000000027f08] 0x27f08
      
      It is because linux use an internal structure node_masks[] to
      keep the best memory latency node only. However, LDOM mdesc can
      contain single latency-group with multiple memory latency nodes.
      
      If the address doesn't match the best latency node within
      node_masks[], it should check for an alternative via mdesc.
      The warning message should only be printed if the address
      doesn't match any node_masks[] nor within mdesc. To minimize
      the impact of searching mdesc every time, the last matched
      mask and index is stored in a variable.
      Signed-off-by: default avatarThomas Tai <thomas.tai@oracle.com>
      Reviewed-by: default avatarChris Hyser <chris.hyser@oracle.com>
      Reviewed-by: default avatarLiam Merwick <liam.merwick@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      74a5ed5c
  4. 09 Nov, 2016 3 commits
    • Linus Torvalds's avatar
      Merge tag 'sound-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 27bcd37e
      Linus Torvalds authored
      Pull sound fixes from Takashi Iwai:
       "This became a largish pull-request, as we've got a bunch of pending
        ASoC fixes at this time. One noticeable change is the removal of error
        directive in uapi/sound/asoc.h. We found that the API has been already
        used on Chromebooks, so we need to support it even now.
      
        A slight big LOC is found in Qualcomm lpass driver, but the rest are
        all small and easy fixes for ASoC drivers (sti, sun4i, Realtek codecs,
        Intel, tas571x, etc) in addition to the patches to harden the ALSA
        core proc file accesses"
      
      * tag 'sound-4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
        ALSA: info: Return error for invalid read/write
        ALSA: info: Limit the proc text input size
        ASoC: samsung: spdif: Fix DMA filter initialization
        ASoC: sun4i-codec: Enable bus clock after getting GPIO
        ASoC: lpass-cpu: add module licence and description
        ASoC: lpass-platform: Fix broken pcm data usage
        ASoC: sun4i-codec: return error code instead of NULL when create_card fails
        ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0>
        ASoC: samsung: get access to DMA engine early to defer probe properly
        ASoC: da7219: Connect output enable register to DAIOUT
        ASoC: Intel: Skylake: Fix to turn off hdmi power on probe failure
        ASoC: sti-sas: enable fast io for regmap
        ASoC: sti: fix channel status update after playback start
        ASoC: PXA: Brownstone needs I2C
        ASoC: Intel: Skylake: Always acquire runtime pm ref on unload
        ASoC: Intel: Atom: add terminate entry for dmi_system_id tables
        ASoC: rt298: fix jack type detect error
        ASoC: rt5663: fix a debug statement
        ASoC: cs4270: fix DAPM stream name mismatch
        ASoC: Intel: haswell depends on sst-firmware
        ...
      27bcd37e
    • Linus Torvalds's avatar
      Merge tag 'for-linus-4.9-rc4-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux · 3c6106da
      Linus Torvalds authored
      Pull orangefs fix from Mike Marshall:
       "We recently refactored the Orangefs debugfs code. The refactor seemed
        to trigger dan.carpenter@oracle.com's static tester to find a possible
        double-free in the code.
      
        While designing the fix we saw a condition under which the buffer
        being freed could also be overflowed.
      
        We also realized how to rebuild the related debugfs file's "contents"
        (a string) without deleting and re-creating the file.
      
        This fix should eliminate the possible double-free, the potential
        overflow and improve code readability"
      
      * tag 'for-linus-4.9-rc4-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
        orangefs: clean up debugfs
      3c6106da
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · ae67e87f
      Linus Torvalds authored
      Pull s390 fixes from Martin Schwidefsky:
       "Two bug fixes
      
         - a memory alignment fix in the s390 only hypfs code
      
         - a fix for the generic percpu code that caused ftrace to break on
           s390. This is not relevant for x86 but for all architectures that
           use the generic percpu code"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
        percpu: use notrace variant of preempt_disable/preempt_enable
        s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment
      ae67e87f
  5. 08 Nov, 2016 9 commits
    • Linus Torvalds's avatar
      Merge tag 'iommu-fixes-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu · e3a00f68
      Linus Torvalds authored
      Pull IOMMU fixes from Joerg Roedel:
      
       - Four patches from Robin Murphy fix several issues with the recently
         merged generic DT-bindings support for arm-smmu drivers
      
       - A fix for a dead-lock issue in the VT-d driver, which shows up on
         iommu hotplug
      
      * tag 'iommu-fixes-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
        iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path
        iommu/arm-smmu: Fix out-of-bounds dereference
        iommu/arm-smmu: Check that iommu_fwspecs are ours
        iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s
        iommu/arm-smmu: Work around ARM DMA configuration
      e3a00f68
    • Joerg Roedel's avatar
      iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path · bea64033
      Joerg Roedel authored
      It turns out that the disable_dmar_iommu() code-path tried
      to get the device_domain_lock recursivly, which will
      dead-lock when this code runs on dmar removal. Fix both
      code-paths that could lead to the dead-lock.
      
      Fixes: 55d94043 ('iommu/vt-d: Get rid of domain->iommu_lock')
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      bea64033
    • Robin Murphy's avatar
      iommu/arm-smmu: Fix out-of-bounds dereference · 8c82d6ec
      Robin Murphy authored
      When we iterate a master's config entries, what we generally care
      about is the entry's stream map index, rather than the entry index
      itself, so it's nice to have the iterator automatically assign the
      former from the latter. Unfortunately, booting with KASAN reveals
      the oversight that using a simple comma operator results in the
      entry index being dereferenced before being checked for validity,
      so we always access one element past the end of the fwspec array.
      
      Flip things around so that the check always happens before the index
      may be dereferenced.
      
      Fixes: adfec2e7 ("iommu/arm-smmu: Convert to iommu_fwspec")
      Reported-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Acked-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      8c82d6ec
    • Robin Murphy's avatar
      iommu/arm-smmu: Check that iommu_fwspecs are ours · 3c117b54
      Robin Murphy authored
      We seem to have forgotten to check that iommu_fwspecs actually belong to
      us before we go ahead and dereference their private data. Oops.
      
      Fixes: 021bb842 ("iommu/arm-smmu: Wire up generic configuration support")
      Signed-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      3c117b54
    • Robin Murphy's avatar
      iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s · ec615f43
      Robin Murphy authored
      We now delay installing our per-bus iommu_ops until we know an SMMU has
      successfully probed, as they don't serve much purpose beforehand, and
      doing so also avoids fights between multiple IOMMU drivers in a single
      kernel. However, the upshot of passing the return value of bus_set_iommu()
      back from our probe function is that if there happens to be more than
      one SMMUv3 device in a system, the second and subsequent probes will
      wind up returning -EBUSY to the driver core and getting torn down again.
      
      Avoid re-setting ops if ours are already installed, so that any genuine
      failures stand out.
      
      Fixes: 08d4ca2a ("iommu/arm-smmu: Support non-PCI devices with SMMUv3")
      CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
      CC: Hanjun Guo <hanjun.guo@linaro.org>
      Signed-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      ec615f43
    • Robin Murphy's avatar
      iommu/arm-smmu: Work around ARM DMA configuration · fba4f8e5
      Robin Murphy authored
      The 32-bit ARM DMA configuration code predates the IOMMU core's default
      domain functionality, and instead relies on allocating its own domains
      and attaching any devices using the generic IOMMU binding to them.
      Unfortunately, it does this relatively early on in the creation of the
      device, before we've seen our add_device callback, which leads us to
      attempt to operate on a half-configured master.
      
      To avoid a crash, check for this situation on attach, but refuse to
      play, as there's nothing we can do. This at least allows VFIO to keep
      working for people who update their 32-bit DTs to the generic binding,
      albeit with a few (innocuous) warnings from the DMA layer on boot.
      Signed-off-by: default avatarRobin Murphy <robin.murphy@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      fba4f8e5
    • Takashi Iwai's avatar
      ALSA: info: Return error for invalid read/write · 6809cd68
      Takashi Iwai authored
      Currently the ALSA proc handler allows read or write even if the proc
      file were write-only or read-only.  It's mostly harmless, does thing
      but allocating memory and ignores the input/output.  But it doesn't
      tell user about the invalid use, and it's confusing and inconsistent
      in comparison with other proc files.
      
      This patch adds some sanity checks and let the proc handler returning
      an -EIO error when the invalid read/write is performed.
      
      Cc: <stable@vger.kernel.org> # v4.2+
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      6809cd68
    • Takashi Iwai's avatar
      ALSA: info: Limit the proc text input size · 027a9fe6
      Takashi Iwai authored
      The ALSA proc handler allows currently the write in the unlimited size
      until kmalloc() fails.  But basically the write is supposed to be only
      for small inputs, mostly for one line inputs, and we don't have to
      handle too large sizes at all.  Since the kmalloc error results in the
      kernel warning, it's better to limit the size beforehand.
      
      This patch adds the limit of 16kB, which must be large enough for the
      currently existing code.
      
      Cc: stable@vger.kernel.org # v4.2+
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      027a9fe6
    • Heiko Carstens's avatar
      percpu: use notrace variant of preempt_disable/preempt_enable · 7f8d61f0
      Heiko Carstens authored
      Commit 345ddcc8 ("ftrace: Have set_ftrace_pid use the bitmap like
      events do") added a couple of this_cpu_read calls to the ftrace code.
      
      On x86 this is not a problem, since it has single instructions to read
      percpu data. Other architectures which use the generic variant now
      have additional preempt_disable and preempt_enable calls in the core
      ftrace code. This may lead to recursive calls and in result to a dead
      machine, e.g. if preemption and debugging options are enabled.
      
      To fix this use the notrace variant of preempt_disable and
      preempt_enable within the generic percpu code.
      Reported-and-bisected-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
      Tested-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
      Fixes: 345ddcc8 ("ftrace: Have set_ftrace_pid use the bitmap like events do")
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Acked-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
      7f8d61f0
  6. 07 Nov, 2016 5 commits
  7. 06 Nov, 2016 1 commit
    • Guenter Roeck's avatar
      openrisc: Define __ro_after_init to avoid crash · 2c7a5c5c
      Guenter Roeck authored
      openrisc qemu tests fail with the following crash.
      
      Unable to handle kernel access at virtual address 0xc0300c34
      
      Oops#: 0001
      CPU #: 0
         PC: c016c710    SR: 0000ae67    SP: c1017e04
         GPR00: 00000000 GPR01: c1017e04 GPR02: c0300c34 GPR03: c0300c34
         GPR04: 00000000 GPR05: c0300cb0 GPR06: c0300c34 GPR07: 000000ff
         GPR08: c107f074 GPR09: c0199ef4 GPR10: c1016000 GPR11: 00000000
         GPR12: 00000000 GPR13: c107f044 GPR14: c0473774 GPR15: 07ce0000
         GPR16: 00000000 GPR17: c107ed8a GPR18: 00009600 GPR19: c107f044
         GPR20: c107ee74 GPR21: 00000003 GPR22: c0473770 GPR23: 00000033
         GPR24: 000000bf GPR25: 00000019 GPR26: c046400c GPR27: 00000001
         GPR28: c0464028 GPR29: c1018000 GPR30: 00000006 GPR31: ccf37483
           RES: 00000000 oGPR11: ffffffff
           Process swapper (pid: 1, stackpage=c1001960)
      
           Stack: Stack dump [0xc1017cf8]:
           sp + 00: 0xc1017e04
           sp + 04: 0xc0300c34
           sp + 08: 0xc0300c34
           sp + 12: 0x00000000
      ...
      
      Bisect points to commit d2ec3f77 ("pty: make ptmx file ops read-only
      after init"). Fix by defining __ro_after_init for the openrisc
      architecture, similar to parisc.
      
      Fixes: d2ec3f77 ("pty: make ptmx file ops read-only after init")
      Cc: Kees Cook <keescook@chromium.org>
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Acked-by: default avatarStafford Horne <shorne@gmail.com>
      2c7a5c5c
  8. 05 Nov, 2016 11 commits